Type of Flower pot rack

1. Hanging iron rack

iron flower racks can protect potted plants, which are not easy to break for potted plants; iron Flower stand can save space and play a better decorative effect; iron -style flower stands fashion trends can add beauty; most importantlyDanning to the sun.

2. Multi -layer Flower stand

At the corner of the house, placing a good corners of the corner can play a good decorative role, and it can make full use of the dead ends of the balcony to plant different plants according to the characteristics of the plant.Veimal vegetables and green plants on the balcony can be used for anticorrosive wood or iron corner flower racks that have been carried out.

3. folding Flower stand

The folding Flower stand is generally A -shaped design. The design of the A -shaped design not only makes it more stable, but also allows the potted plants on the Flower stand to get sufficient light and save space.The upper layer of this Flower stand can be placed in Xiyang, and plants that like semi -yin and half -yang are placed at the bottom layer, which is very practical.Different from ordinary flower stands, it can also prevent suspension of potted plants.

4. Multifunctional combination planting boxes

This combination of vegetable boxes can be combined according to your own needs, and can be combined with a single layer or a multi -layer combination.The structure of the upper and lower parts provides sufficient growth space for vegetables, and it is also very convenient to take care of it.

5. stools, tables

If the quality requirements for life are not so high, you can use a small bench and tablet to replace the Flower stand.Put the vegetable basin in a higher place to make it more fully accepting the sun, and it will also make the balcony more three -dimensional.In order to prevent moisture, it can also cover the excessive sunshine in summer.

Flower Bashestand Shopping Tips

1There are different materials such as wood, iron, and root carving in the balcony Flower stand. Consumers can choose flower stands of different materials according to factors such as potted plants, indoor decoration and other factors.

2There are different specifications of balcony Flower pots. Consumers should be determined before purchasing.

3, Balcony Flower pot Flower House has two installation methods for mobile and wall -mounted balcony Flower pots. If you want to install it on the wall, you can choose a wall -mounted balcony flowerpot Flower stand. If it is placed on the balcony, you can choose a mobile typeBalcony Flower pot Flower stand.

4According to the spatial pattern: The size and specifications of the iron art stand are different. Before buying the product, it is recommended to determine the placement of the Flower stand and the size of the placement space, so as to choose the appropriate size iron Flower stand.

5According to the decoration style of the living room: Due to the many iron Flower stand shapes, you need to determine the decoration style of the living room before buying, and choose the Flower stand based on the decoration style to highlight the decoration effect of the living room.

precautions for buying in Flower pot rack

1We should pay attention to the people who put the Flower pots on the balcony. Long -term sunlight can make the white vine chair yellow and the brown vine chair faded.In addition, ultraviolet rays can also make green leaf ribbon vine, which will shorten life.If the room is not large, the desk is against the window.If the Flower pot is not large, it can be placed on the window sill.You can place some flowers of Xiyang.

2, Flower pots absorb a lot of water. When the water accumulates to a certain degree, the Flower pots will become soft and loose.

3We must pay attention to frequent ventilation, especially in the southern region with more rainfall.In addition, it is best to take care of the dry cloth after wiping the wet cloth. Of course, it can also be placed in a ventilated place, but avoid sunlight.

4In the end, although ordinary wood is low in price, durability is poor.Because flower racks and Flower pots are usually outdoors, anticorrosive wood has the characteristics of good anticorrosion, insect -proof, and waterproofing. The anticorrosive wooden flower raw Flower pot not only has simple appearance and natural appearance, but also makes up for the shortcomings of the poor durability of ordinary wood.

Recommended reading

[home tools] What are the daily tools of family tools?

[Gardening Flower shovel] precautions for the purchase of the type of flower shovel

[Garden scissors] Pruning garden scissors have several types and uses of garden scissors

[Sprinkle Warling Booth] How to make the production diagram of the sprinkler sprinkler sprinkler sprinkler sprinkler sprinkler sprinkler

[Balcony vegetables] What are the wonderful use of hemp rope to grow vegetable rope

[Tendon Book] How to use the vegetable climbing of the vegetable climbing rack?

[Basin bottom net] What is the bottom of the Flower pot bottom pad?

[planting vegetables] What pots are used for balcony?

[Flower Basket shelf] How to choose a Flower pot rack balcony, how to choose the balcony, how to choose

1. Steps of the installation process of city circuit lamps

The city circuit lamp consists of the lamp head (light source), light pole, embedded parts, mixed soil foundation, lightning -absorbing corner iron, PVC Tube, wire, cable, control box (time and space switch, exchange contactor, leakage protection device) and other parts.The installation process steps are: basic positioning basic pouring construction cable protection groove slot slot threading pipe support threading cable protection groove backfill lamp wiring street light control installation:

1. Basic positioning

The survey address is determined to determine the position of the light pole. At the same time, there is no cable, pipeline and other facilities below the excavation location. Based on the above, the high -voltage wire must be avoided, and the leaves are used to avoid the safety of the leaves to ensure the safety of construction.

2. Basic pouring construction

Dig a basic pit with the corresponding size according to the drawings, then enter the lightning -absorbing angle iron, use the concrete to enter the cushion, and then fix the embedded parts; finally put two in less than less than 30mm arc -shaped threading Tube, the threading Tube of the threading Tube, and the threading Tube.One end is placed in the center of the four screws of the embedded parts, one of which comes in in the direction of the main cable, and the other one ends in the direction of the main cable.

3. Cable protection groove slot

In the case of cement pavement or street road surface, a cable protective groove should be dug into the cement slot. The depth of the slot should be determined according to the actual situation.

4. Circuit Tube supplement

The thread is generally used for cables. One end is fixed on the guidance steel wire. The piercing rod is introduced. On the basis of embedding, there is -shaped semi -circular, which is used for wiring.The length of each round line is determined.

5. Cable protection groove recovery

The hidden project can be filled in the cable protection groove after confirming the qualification, and the layered landfilling when the backfill is returned.

6. lighting assembly

Divide the light rod to each foundation, and assemble the light rod arm on the side of the road parallel. Do not scrape the wire in the light rod during the thread to protect the cortex;Adjust the parallel degree of the light surface and the parallel surface of the light head and the elevation of the light head, and try the temporary power supply.

7. Establishing rod wiring

The vertical rod is divided into two types: artificial vertical rod and mechanical vertical rod. Pay attention not to press the French disk to the wire and cable to prevent the leakage of the Skin.Do not touch the surrounding high -voltage lines or other buildings when standing.Add the cushion under the buried nut and use nuts to fasten.Effect the light rod, the light pole must be perpendicular to the road surface.Then faste the pads of the lightning -absorbing angle iron, and the conditions are allowed to be welded to ensure that the light rod is connected to the pile with the lightning corner.Do a good job of connection between the main cable and the wire in the light rod, and do a good job of waterproof treatment. The phase wire of each lamp should be installed with a fuse. The fuse should be fixed., The upper end of the fuse should be connected to the wire, the lower end is connected to the power supply, and the lamp rod is connected to the ground wire at the same time.

8. Street light control installation

Street light control box components include leakage protection, timing microcomputer switches, AC contactors, separation switches, and electric meters. Check whether the connection is correct and whether the wiring is firm., Finally connect to the distribution box to connect the ground wire.

After the above steps, the rust -proof processing of the street light rod can be embedded in the street light rod. If the conditions are conditional, add an additional nut fastener. After the liquid asphalt is brushed, the city circuit light is installed.

2. What are the requirements for Outdoor street lights?

1. The protection of Outdoor street lights is divided into TT and TN systems, of which the TN system is divided into TN-C, TN-S, TN-C-S system.

2. The TT method refers to the protection system that directly grounds the metal shell of the street lamp steel rod, commonly known as single Lights.When the metal shell of the street -lamp steel rod is charged, the danger of electric shock is reduced by a low -voltage section. It is suitable for places where ground protection is very scattered. At present, it is rarely used.

3. The TN method of power supply system is the protection system that connects the metal shell of the street light steel rod with the working zero line. It is also known as the zero protection system of the street light connection. Once the device appears, the zero protection system can raise the leakage current to a short -circuit current to a short -circuit current.This current is very large, which is 5.3 times the TT system. In fact, it is a relatively short -circuit failure. The fuse of the fuse will melt.Safety.

4. The welding of the ground wire should comply with relevant regulations: flat steel is twice the width of its width, and at least 3 edges are welded. The round steel is 6 times the diameter. When the round steel is connected to the flat steel, the length of the round steel is round steel.6 times diameter.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. The breeding method and precautions of the emperor flower

1. Soil The planting soil of the emperor flower requires good drainage performance, especially the seedlings.If the pot is tied, the seedlings are difficult to grow.The sandy soil is the most suitable for the growth of the emperor.In family breeding, Flower pots should also choose a slightly larger breathability pottery pot.

2. Temperature The temperature of the emperor's flowers is generally not less than 7 degrees Celsius, and the temperature in summer should be 27 degrees Celsius.Individual varieties can resist low temperature, and zero -degrees Celsius will not frostbite.

3. Light The emperor's flowers like the sun.It can be maintained at all sun.But in the summer, it needs to be cool and dry, and it needs to be appropriately shaded in the scorching sun.

4. Watering The emperor flower likes to dry the environment. Watering can be appropriate, and there is no need to keep the pot soil moist.However, pay attention to the adjustment of the humidity of the air to spray water mist around the plant.

5. Fertilization The emperor flowers are not very high in nutrients. Each Fertilizer can meet the growth requirements once each spring and autumn.

2. How to plant the emperor flowers

1. planting time First of all, you need to choose the appropriate time. The emperor's sowing time is more about the autumn October. At this time, the seeds are just picked, and the germination power is relatively strong.And at this time, the temperature and humidity are more suitable, and the seed germination rate can be increased after planting.

2. seed treatment The seeds of the emperor flowers are difficult to pick them. The petals need to be placed in the sun and dried, and then picked the mature seeds with their hands.After that, you can soak in warm water for 3 to 5 hours, and you can remove it and use high -lipid film for planting to avoid the breeding of bacteria.

3. Soil preparation The emperor flower likes to grow in the soil with strong breathability and good drainage, so you can choose to prepare humus soil and river sand according to a 1: 1 ratio.You can add an appropriate amount of rot bark and base Fertilizer to give the seeds enough nutrients, which will shorten the time for seed germination.

4. Sowing and maintenance Place the seeds of the emperor flower in the soil, covering 3 cm thick soil, and sowing about 3 seeds in a Flower pot.After the sowing is completed, watering is required. There is no need to water again during germination. When the emperor flowers grow out of the real leaves, you can water the second water and move into the astigmatism environment.

3. How to cut the emperor flowers

1. Choose the branches above the semi -wooden position of the emperor Hua Mother.

2. The matrix uses peat and perlite to mix with a volume ratio of 4: 6, adjust the pH value of 5.5 ~ 6.5, and the EC value is less than 0.5.

3. Immerse the cutting base of the cuttic acid solution of 1000 ppm, soak it for 15 minutes and air dry immediately.

4. The depth of cutting is 1/3 ~ 1/4 of the length of the cuttings.After cutting, manages according to conventional technology, and field transplant is transplanted after the seedlings are out of seedlings.

one.Method of signature trees

1. If the climate is appropriate, the signature tree is always green all year round, usually blooming in spring, usually open at night, and it may also open during the day.It is best not to be too low in winter temperature, otherwise it is likely to freeze to death.

2. Signature trees are suitable for breeding in an environment with sufficient light and warm and humid.However, when the sun is more poisonous in summer, it is necessary to cover it properly, otherwise the leaves may be sunburned; if it is maintained in the place where the light is insufficient, it will lead to long -term, the leaves may be yellow, and the distance between the leaves will become longer.

3. The signature tree is not very strict with the soil. It prefers moist soil, but to ensure that the soil has the characteristics of loose drainage and breathability. Generally, peat soil is matched with perlite and river sand. The proportion is 1: 1:1.

4. Regarding fertilization, like the Fertilizers of other flowers and trees, nitrogen fertilizer is the main.

5. Potted signature trees need to be reasonably trimmed to control the plant type.

2. Cultivation method of signature books

If you want to make the branches of the signature tree grow more quickly, you usually choose hydroponic methods to cultivate.Soak the bottom of its branches about two or three centimeters in the water, place it in a ventilated light transmission, maintain a certain air humidity and warm environment, and you can grow the root system in about a week.After developing the signature tree of potted plants, the root system will be particularly strong in one or two years. In the later period, pay attention to regularly changing pots.

3. precautions for the breeding of the signature tree

In the process of breeding, the signature tree is easily invaded by some diseases.

1. In harm, it is mainly due to the harm of the thrips. The new leaves of the signature tree are subject to the silkworms of the thrips. At the beginning of the disease, it can be controlled by 1500.

2. In the disease, it is mainly anthracnose.After the onset of the disease, the signature tree can be removed by the leaves of the disease, and then sprayed 800 times the fungus to clear the prevention and control, sprayed 3-4 times in a row, and once every 4-5 days.

For pets, prenatal and postpartum are very important periods. Production will consume a lot of energy and physical strength of female hamsters, and nutritional consumption is also very large.Pay more attention to avoid postpartum syndrome due to malnutrition.In addition, pay attention to cleaning for its living environment, so as not to be violated by germs at this time.

For pets, prenatal and postpartum are very important periods. Production will consume a lot of energy and physical strength of female hamsters, and nutritional consumption is also very large.Pay more attention to avoid postpartum syndrome due to malnutrition.In addition, pay attention to cleaning for its living environment, so as not to be violated by germs at this time.

For pets, prenatal and postpartum are very important periods. Production will consume a lot of energy and physical strength of female hamsters, and nutritional consumption is also very large.Pay more attention to avoid postpartum syndrome due to malnutrition.In addition, pay attention to cleaning for its living environment, so as not to be violated by germs at this time.

First place the cage in a quiet corner.The owner's action at home should be as quiet as possible.The mouse mother nurtured the rats in the early stage.The distance between the two cages should be as far as possible.

If it is cold, the wood chips must be thick.The upper layer of the wood chips can be paved with warm cushions such as tissue silk, paper cotton, and note.The proportion of wood chips is more, and the thickness of paper towels or paper cotton and paper strips is about thin. It is enough.

One thing to explain here is that ordinary paper towels contain fluorescence agents and mothers and mothers. If you can buy ego and environmental protection paper on the market, try to use environmental protection paper as much as possible.If it is useless, use a soft texture without fragrance paper towel.

If it is in the hot summer of the weather, this is the season when the mouse is the most prone to abandonment. The reason is that the temperature is too high.So in this season, the conditional mouse friends should try to keep the temperature as much as possibleAbout 25 degrees.Of course, do not let air conditioners blow directly to the mouse cage.

Pay special attention to diet, first ensure that food and water must be sufficient.In particular, to ensure that the water is sufficient, the consumption of water will increase with the growth of the rat baby, and it must be noted.Be careful when changing water and food, preferably when the mouse sleeps or is not around.

If you use a vacuum kettle, pay attention to the height of the kettle, because the mouse will actively drink water after opening your eyes, so the kettle should be well grasped.Too low, the wood chips may enter the Tube of the kettle, causing water leakage.Too high, the mouse babies can't drink it.Therefore, you should observe more and adjust the appropriate height.If you use a steel ball kettle, it is recommended to replace it with a vacuum kettle, especially usingThe recommendation of the spring -type steel ball kettle of AB cage is replaced.Because the baby is often licking the steel ball because of insufficient strength, the drinking water fails.

In terms of food, face must be sufficient.As for how many roots are fed, according to the number of rats, every day, every dayA babies of rats are about 2 ~ 3.If the number of rats is not clear, it is enough to be more than 10 a day.

Generally ten days later, the odor of the cage began to appear, but at this time, the mouse cage could not be cleaned.Especially after drinking water, the water consumption is amazing, and their urine volume is also amazing.Fortunately, they often sprinkle urine in a fixed place.So rats are bornAfter 10 days, you can carefully take out the water chips with urine, then wipe it with paper, and then add new wood chips.

In other positions, you can also take out the smell of dirty. By the way, take the stool and add wood chips appropriately.Because the previous wood chips were also flattened by them, the new wood chips were not only hygienic, but also the taste will be lighter.But these cleaning is also requestedDo about 10 days.clean the mouse cage after 2 weeks, and try to wait until the mouse can actively eat.Time can be grasped about fifteen days after the birth of the mouse baby.

In short, you must take care of the mother and hamster, manage your diet, rectify hygiene, and arrange mice.Avoid sick mice during this period, because their physique is deviated during the period of nursing.