Articles in Categorys Balcony Garden

1. The characteristics of anticorrosive wooden Flower stand

1. Anticorrosive wooden Flower stand is a shed Flower stand that is specially used for Hanging flowers and plants. It is made of special corrupt wood. It has a variety of characteristics such as natural, environmental protection, and moisture.Rural style.

2. The anticorrosive wood Flower rack has a strong ability to prevent the moth, which can fully dissolve the killing of fungi and viruses. The anticorrosive wood is a type of corrupted wood. It contains a lot of solubitives in itself, which can effectively prevent the bites of the worm.

3. The anticorrosive wooden Flower rack has the characteristics of moisture -proof. It will not rot if it is moisture like other wood, and the durability is particularly strong.

4. In the anticorrosive wooden Flower stand, contains a lot of discoloration factors, so it will not cause harm to the wooden appearance tissue. Under suitable conditions, part of the discoloration factor will generate many cellulose, which can form a protective layer on the outer surface to form a protective layer.For internal wood, it plays a good protective role.

2. The purpose of anticorrosive wooden Flower stand

1. The most important purpose of anticorrosive wooden Flower stand can grow beautiful flowers around the Flower stand, or some Teng Man's plants, which helps the plants grow along the Flower stand.To a better growth environment, it can also play a certain decorative role.

2. The anticorrosive wooden Flower stand is very beautiful. After exquisite design, you can not only decorate the room, but also put it in the yard. As a shaded rest, it is a natural percux, which can be used for users to rest and appreciate the scenery.

3. Anticorrosive wooden Flower stand can be used for family decoration, creating a natural decoration environment of the countryside. It can also be used in the Park, which can beautify the natural environment and create a rest place for passers -by.In the garden plant training base, it creates a natural environment for the growth of flowers and plants.

3. How to install anticorrosive wooden Flower stand

With the development of bionic technology, the bionic invention of anticorrosive wooden Flower stand has gradually been applied to life.Therefore, the anticorrosive wood designers pay attention to the imitation results, and also pay attention to the laws of natural changes.But how to install anti -corrosion wooden flower stands to be stronger?

1. Method paving method:Use stainless steel cross screws to connect to the keel on the front of the anticorrosive wooden Flower stand; fix the keel on the opposite side of the Flower stand with screws, and make a few compositions into a whole. It will not destroy the ground structure, but also freely disassemble and clean it.

2. Fixed laying method:Fix the keel on the ground with expansion screws, and the expansion filaments are made of nylon (better anti -aging).

3. Suspension laying method:The keel can be connected to a frame or a well -character frame structure on the ground, and then laid the Flower stand.

The specific measures are as follows:

1. Treatment of the grassroots level of the wooden structure: During the design and construction, the air circulation between the anticorrosive wood and the ground should be fully maintained.

2. When making and installing anticorrosive wooden flower frames, 0.2-1cm gap between anticorrosive wood should be left (then determine the gap size according to the moisture content of the wood, and the water content of the wood should not exceed 0.8cm.The expansion of water and anticorrosive wood.

3. Fang columns with a thickness of more than 50mm or more than 90mm are opened in the center of the back of the back.

4. Hardware to avoid rust corrosion in the future and apply stainless steel, hot -dip galvanized or copper materials.Please drill in advance when connecting installation to avoid anti -corrosion wood cracking.

5. Use the existing size and shape as much as possible. The damaged part should be painted with preservatives and Outdoor protective coatings. Because the anticorrosive wood itself is a semi -finished product, the rough part can be reduced to less than 20%after the laid.Light again, if you want to have a better effect, you can paint Outdoor protection coatings after cleaning the surface.In the case of a rainy day, it is best to cover it with plastic cloth first, and then brush out the Outdoor protection coatings after the sun is clear. It should be avoided within 24 hours after painting.

6. Surface user external protective coatings or oil -based coatings are applied (only once). In order to achieve the best results, avoid people walking or heavy objects within 48 hours, so as not to destroy the protective film that has been formed by the anticorrosive wood layer.EssenceIf you want to obtain a better anti -dirty effect, you can do two special Outdoor varnish treatment if necessary.

Profile

Crab claw orchid, meat plant, shrub -shaped, stem Hanging, branches without thorns, old stems are flat, flat; fresh green or purple, the top is cut, the flowers are single on the top of the branch, two on the top of the branch, two, twoSide symmetry; separation of calyx top; several rounds of corolla, most stamens, berry -shaped.The flowering period is from October to February of the following year; the indoor -cultivated crab claw can be adjusted by controlling light.

Crab clawFor viewing plants, it is often grafted on the ruler or other rootstocks to obtain lush plants.Native to Brazil, common cultivation of parks and flower gardens across China.

Nickname

Christmas cactus, crab claw lotus, icing on the cake, crab orchid

Morphology

Affective meat plants are often shrub -shaped and non -leaf.There is no thorns, many branches, often Hanging, old stems, cylindricals, young stems and branches are flat; each section of torque is round to obovate, 3-6 cm long, 1.5-2.5 cm wide, fresh, fresh, fresh, fresh, fresh, fresh, fresh, fresh, fresh, fresh, fresh, fresh, freshGreen, sometimes a little purple, cut the top, 2-4 crude jagged on each side, and a thick middle rib on both sides; sometimes there is a little short thorn in the nest hole.

flowers are single on the top of the branch, rose red, 6-9 cm long, symmetrical on both sides; a round of calyx, a short Tube at the base, and the top is separated; the corolla is several rounds, the lower part of the Tube, the upper part ofLong; Most of the stamens, 2 rounds, stretched out, bending upward; the flower columns are long in the stamens, dark red, and the stigma 7 cracks.The pear -shaped, red, about 1 cm in diameter.

variety

Common hybrids in crab claws include white Christmas white, Dose, Gina, and snowflakes; yellow varieties include Jinmei, Christmas flames, golden fantasy, and Cambridge; orange Ante, Frigo; Purple varieties are Madajia; Pink varieties include Camilla, Disto and Eva, mostly introduced from the United States, Japan, Denmark and other countries.The conventional varieties include light purple, red rounded crab claws, white flower sprouts, pink beautiful crab claws when open, flower bud red crab claws and Russell, Buckley, blunt horns, Christmas cactus, etc.Essence

Suitable place

Crab orchid stems are often suspended because they are too long, so they are often made into chrome for decoration.The crab claw orchid blooms at Christmas and New Year's Day.

Effectiveness and role

Viewing value

There are many different varieties in crab claw orchids. They have different colors and appearances, and they are different in the flowering season. They are one of the most common ornamental flowers in the scenic spots, especially snowflakes, yellow Jin Mei, and Ant.They are more precious in crab claw orchids, with high ornamental value.

Purify the air

Crab claw orchid is a kind of negative plant that is suitable for breeding indoors. It absorbs a large amount of carbon dioxide in the air when breathing, and is converted into oxidation and release, which has a good effect on purifying the air.In addition, crab claw orchid also has a certain decomposition effect on electronic radiation. It can be placed next to the computer and TV, which can effectively reduce the damage of these electronic radiation sources to human body.

Medicinal effect

Crab claws can be used as a whole plant. It is a traditional Chinese herbal medicine that can clear heat and detoxify. It has a good treatment effect on human sore swelling and mumps.After the crab claw orchid is used, it is mainly used for multi -color freshness. It can be harvested throughout the year. After harvesting, it can be washed and made into mud. The treatment effect is excellent.

Breeding method

illumination

The crab claw orchid is afraid of the hot and high temperature, and avoid exposure and rain. Therefore, it should be placed in the indoor ventilation of the room or on the shade balcony in the summer.After the beginning of the autumn, the crab claw orchid gradually recovers the growth, and should be placed in a place with 50 % of the light, such as the shadow shed or Xiangyang window to receive light and promote the differentiation of flower buds.As the weather turns cold, it should be given sufficient light in late autumn to winter.

Humidity/watering

Crab claws belong to the cactus of cactus. In the natural environment, they are often attached to trees or humid valleys. Therefore, the cultivation environment requires semi -yin and humidity, but the pot soil cannot be too wet and pursue the principle of "dry and transparent".Watering once every 2 to 3 days in high temperature season, avoid watering at noon; the temperature in winter is low, and you can water it once a week to avoid watering in the evening.

temperature

The suitable temperature of the crab claw orchid is 20 C to 25 C.At 22 C, it is best to use ventilation equipment; when the temperature is above 35 C or below 2 C, the plant will stop growing.

soil

Crab claw orchids are fertile and loose soil. Family can use 3 parts of garden soil, 4 parts of corrupt leaf soil, 3 parts of sand or 4 parts of peat soil, 2 parts of corrupt leaf soil, 2 parts of sand, 2 parts of perlite (or volcanic rock rocky rock (or volcanic rock rocky rock), It is best to disinfect after the soil is equipped with high temperature, and it can also be exposed to sterilization under the sun.

Fertilize

Crab claws like Potassium fertilizer, followed by nitrogen fertilizer and phosphate Fertilizer.Fertilizers that can use N, P, and K to 30:15:20 or 40:20:30.Fertilization is stopped in winter, and 1,000 times per -per -weekly leaf surface can be sprayed with 1,000 times potassium dihydrogen phosphate Fertilizer.

Flowering

Crab claws are short -day plants, which can control the purpose of controlling the flowering period by regulating the time of light.To promote flowering, short -day treatment is started from 60 to 70 days in advance according to the hoped flowering time.Natural light time is 8 hours a day, and the rest of the time is shaped.Continuously Shading, cannot be interrupted, and can generally see flower buds after 20 days.

Frequently problem handling

Way of breeding

1. Grafting

Rootstock: Choose the rootstock first.The rootstock is good for cactus,

Especially with beef tongue palms, it is better, because its height, good shape, strong and strong main trunk, and strong support can make the grafted crab claw orchid Hanging down freely, which is conducive to viewing.Therefore, one year in advance can be selected for cuttings with strong growth, no harm, neat and beautiful beef tongue palm tablets 1-2 sections, each pot.

Grafting: The suitable time for grafting crab claws is from late March to mid -June and mid -September to mid -October.Grafting should be carried out on the sunny morning. Therefore, the rootstock and scion contain more juice and heal the interface. At the same time, choose the beam of the beam of the second section, the perverted stem 2-3 as the scion.Can).First obliquely cut the scion -based section into a duck -billed shape.The length of the cutting surface is 1.5-2.5 cm. Try to cut it as much as possible to make it easy to survive. Then cut a knife at the top of the rootstock.Later, because there are many sticky liquids and the scion is easy to swim, it is necessary to fix half a minute by hand, and then cross the ears of the ears that are prepared by the cactus and stabbed the ears to make it together.Fixed.Finally, put the connected Flower pot in the cool and ventilated place (note that watering cannot be dipped in the interface), and it is expected to survive for about 20-30 days.

2,Cuttings

Choose a strong crab claw orchid 3-7 knots, generally 1.5 knots are inserted into the pot soil.The growing plants can bloom in the second year, blooming in the third year, and the number of flowers will increase year by year.

Diseases and insect prevention

Crab claw orchids often have anthracnose, rotten and leaf blight. Especially under high temperature and high humidity, the onset of disease is severe.Severe plants should be removed and burned.In the early stage of the disease, 500 times the liquid of 50%of the fungal wettable powder, sprayed once every 10-15D, and sprayed 3 times in total.When the harm of the segmented insect is severe, the surface of the leaf stems is covered with a white shell, which weakens the growth of the plant. The victims are yellow and white.Swilish.When red spiders are harmful, spray 1000-1500 times the prevention and treatment of oxidation and fruit solution.

Pelvic technique

1. The crab claw orchid can be changed to the pot every 2 years, usually from March to April. In addition to adding about 3 cm thick sand and stone on the basin of the pot to facilitate the filtering, it should also be cultivated in the cultivation soil.Add more phosphorus -containing rotten poultry pigeons, broken Bone fish scales, etc., but the root system should not be directly contacted with Fertilizer; when the temperature reaches 30 C, the plant enters a semi -dormant state.

2. At this time, not only should you avoid the scorching sun and rain, but you should also put it in a humid and cool place, at the same time, stop the Fertilizer and control water to prevent rotten roots;You can see the sun in the middle of the day, and give full light in mid -late October, which can promote the differentiation of flower buds and more pregnancy flower buds. At this time, it is advisable to apply liquid Fertilizer with more phosphorus every 7 days to 10 days.

Pruning method

In order to control the shape of the crab claw orchid, it is suitable for indoor furnishings. When the entire plant's puff diameter is more than 50cm, the stems can be shortened in spring, and some aging and dense branches can be removed.The new branches growing after the shear will look tender and green, and flowering will be more lush.It is worth noting that the trimming should be carried out on sunny days, and do not trim on rainy days or in summer.

precautions

1. After the autumn is cold, the crab claw orchid should be placed in the indoor sunlight.If there is no sufficient sunlight in autumn and winter, the flower buds formed will fall off, and the flowering will be reduced or not blossoming.

2. When the crab claw orchid plant grows large, the head is light and light.After the crab claw orchid is defeated, the residual flowers should be cut with the flowering stem nodes at the end, and the water control should be kept. After the new buds grow, water can be watered to keep the pot soil moist.

3. The pot soil of crab claws grafted seedlings can be used with 3 parts of corruption, 4 parts of garden soil, 3 parts of river sand, and a small amount of Organic fertilizer or Bone meal as base Fertilizer.Generally change the pot every 1 to 2 years.Change the pot should be carried out after the spring flowers are losing.

4. In the early spring, after the crab claw orchids thanked, there is a dormant period of about 40 days. At this time, watering should be controlled, but pay attention to loose soil and keep the pot soil dry. When the top starts to emergeKeep the pot soil moist, but avoid water in the pot to avoid rotten roots;

Entering the summer high temperature season, the crab claw orchid is in a dormant or semi -dormant state.

After the autumn, as the weather turns cold, the crab claw orchid gradually recovered, and it starts to water normally to keep the pot soil moist. At present, it is necessary to spray water and fog frequently to keep the perverted stems and buds moist. Watering to keep the soil moist.It is suitable; after flowering, watering should be controlled to extend the flowering period.

1. The breeding method compiled by King Kong

1. Breeding: In May and June of each year, cut from the branches of the mother plant, insert the head plant into the potted pot, and add a small amount of water to maintain the air drying.The chairman is rooted.It should not be carried out too much to prevent rotten roots of water storage.

2. Pour pouring: It should be poured into the basin in the spring situation. It is best to change the old soil when the pouring season should be replaced. We must also cut the rotten roots and plant the main stems.That's fine.

two,King Kongmaintenance method

1. Soil: Diamond compilation in soil with a loose soil layer and strong permeability will grow and develop very well.In the case of configuration of the soil, mixing the mud, cultivation soil, and small amount of scum in the river, so that the breathability working ability of soil will be better.

2. Sunshine: It loves the natural environment of growth and development of light source, and it is usually sufficient.If it is in summer, it should be raised in areas with weak light sources, and it hates being exposed to being exposed by inflammation, which will be more conducive to its growth and development.

3. Temperature: In a natural environment of 22-28 C, it will grow and develop stronger. It does not have a strong low temperature resistance working ability. Therefore, when the average temperature is less than 15 C, it should be moved to the room for maintenance.

4. Water: It is more drought tolerantWell, so do not have too much pouring.The soil should not be too dry during the maintenance period, and there must be a certain amount of water.Pay attention to drainage during the rainy season to prevent rotten roots of water deposit.

5. Rust: When the main stem is rust, the rusty dark spots on the leaves should be placed in a cool place, and the olezoliol and ammonium are used for spraying.

6. Pests and insect pests: If it is placed in an unnatural ventilation house for a long time, it is very easy to suffer from buds.We can use small soft hair brushes to rush the small bugs, and apply the trimmilin to kill the small bugs.

three,Breeding by King KongTaboo

1. King Kong has the effects of insecticidal and itching, which can treat Skin diseases and ringworm.It also has the effects of clearing heat and detoxifying, laxative, and swelling. It can treat gastrointestinalitis, unsoplastic stools, swelling and poisoning, abdominal distension and other diseases.The leaves and stems compiled by King Kong can be used as medicine, but when used, the Skin of the stem should be scraped off.When treating diseases, it is necessary to be poisoned first. It is best to have professional guidance to avoid unnecessary harm to the body.

2. Can you raise it at home: Although it can be cultivated at home, because it has toxic and side effects, it should not be raised at home as much as possible. If there are children at home, pay more attention.

Is the fermented fruit Skin the nitrogen fertilizer?

In fact, after the vast majority of fruit Skin is fermented, it can make nitrogen fertilizer.For example, after the banana peel is fermented, it can be made into nitrogen fertilizer. Both orange peel and apple Skin can be made into nitrogen fertilizer.

How to make fruit Skin production methods

1 You can chop the fruit Skin, and then put it in the sealing of the utensils prepared by everyone. It needs to be poured into the water and placed in the place where the sun can illuminate. 15 arrive 60 God, it can ferment very well.But everyone must pay attention, the utensils must be left 20% The upper and lower parts can prevent the gas from rising under the condition of fermentation, and then the utensils explode.

2 Or prepare a potted Flower pot in advance, put some soil layers in the potted Flower pot, and then spread the peel on the soil layer. In the second floor, a layer of peel should be paved.In addition, in this kind of push, that is so thin 5cm Green plants can be planted in the case of up and down.

What flowers are suitable for fermented fruit Skin

1. Apple Skin

1 As well as Apple fermented water is acidic and can be used to pour acid -like flowers. Most southern flowers are acidic, such as Milan, gardenia, azalea, Clivia, Jasmine, Fairy Classes, Cylinder, Smile flowers, Tong Tong, Golden Flower Tea, Costume, Red Palm, etc.Essence

2 As well as Watering apples of these flowers can not only improve the acid and alkali of the soil, provide a more suitable environment for flowers. Rich nutrients can also supplement the flowers with appropriate nutrients, making the leaves thick green, making flowers bloom more, Promote the growth of flower health.

2. Orange peel

1 , Orange Skin water is slightly acidic Fertilizer, suitable for like acidic plants, such as rhododendrons, laughing, Bailan, jasmine, gardenia, osmanthus, bacheme, ivory red and so on.

2 , Orange Skin is rich in vitamins and sperm oil. Under the dissolution of water, the nutrients in it will be acidic in the soil, which can well change the acid and alkali of the soil.If it becomes fade, it will provide the nutrients required for the root system, which is more beneficial to the growth of flowers.

1. How about Fujiti sofa?

advantage

1. The raw material of the rattan chair sofa is rattan, sturdy and lightweight, with excellent pressure resistance and elasticity, so the rattan chair sofa is very strong and durable.In addition, at present, the common rattan sofa in our lives is exquisite, and the surface has different weaving techniques and techniques to form different pattern patterns, which looks exquisite and elegant.

2. The vine chair sofa style is unique, and the shape and craft are quite excellent. The lines are Smooth and the touch is delicate, bringing a strong and round feeling.

3. The vine chair sofa is made of natural rattan. It is environmentally friendly and fresh. At the same time, it has excellent breathability. It is not easy to mold, easy to clean, comfortable and practical.

4, rattan chair sofa is usually more commonly used in summer. It has excellent heat dissipation, which is conducive to people with peace of breath. It is often used in the summer living room or Outdoor, which makes people feel very cool.

shortcoming

1. Tengchair sofa is usually used in summer, and it is greatly affected by the seasonal changes.

2. After the vine chair sofa is used for a long time, the part of the Bao Teng may be loose.

3. The waterproof and high temperature effect of the rattan chair sofa is poor. Therefore, it is necessary to stay away from water and heat source. At the same time, you need to move from the bottom when moving the furniture. Do not jump on the rattan sofa.

2. How to maintain a rattan chair sofa

1. clean

The most important thing to pay attention to in daily life is cleaning in daily life, because the rattan chair sofa is very vulnerable to moisture, so you must not wash it. After the water is washedHydropower will expand to support the large surface of the family, so that the bottom is drooping.

2. Keep ventilation frequently

The maintenance of the rattan chair sofa must also be ventilated at any time, because the horizontal cross section of the vine is covered with fine catheter, so it can absorb a certain amount of water. If the rattan chair sofa absorbs a lot of water, it will become soft, loose structure, and the structure, and the structure is loose.Planes are drooping, and it is easy to grow moldy spots. Therefore, if you want to do a good job in the maintenance of the rattan sofa, you must keep the home environment ventilated and dry at any time.

3. Anti -ultraviolet rays

The maintenance of the rattan chair sofa also needs to pay attention to prevent ultraviolet rays. Ultraviolet rays in the sun will make the rattan degeneration and crispy. Long -term ultraviolet exposure will make white rattan furniture yellowed, and the brown -red -red Tattoo furniture will fade.It will make the expensive bamboo vine furniture dry, loose and remove, so if you want to protect the sofa of the vine, you must avoid direct sunlight.

4, insect -proof

The vine chair sofa is easy to grow worms, so you need to pay great attention in daily maintenance. In daily life, you can use Pepper or pointed Pepper noodles to prevent insects.Without damage, first use the Pepper Pepper noodles to plug into the pores, and then tighten the gross surface with plastic cloth or small plastic bag to make the smell not leak. Finally, clean it with a towel to achieve the effect of anti -insect -proof effect.

5. Avoid near heating

The maintenance of the rattan chair sofa should also be noticed to avoid approaching heating and heat source, because this is easy to cause deformation, bending, cracking, and the maintenance of the rattan chair sofa.Avoid fire, be sure to put on the thermal pad.

3. How to clean the rattan sofa

1Wipe light salt water

First of all, we can use some light saline to wipe the vine chair,It can not only stain and make it flexible lasting, but also have a certain effect of anti -crispy and insect -proof.

2Floating dust treatment of rattan chairs

For the dust treatment during the maintenance of the rattan chair, we can wipe it with a soft wet cloth. If the dust between the seams of the rattan chair, we can use a paint brush or a vacuum cleaner to clean it. Do not wipe the rattan chair with a cleaner or solvent.Come to clean, so as not to lose elasticity and gloss in the vine chair.

3Wipe wet, dry the dry cloth dry

Finally, the cleaning of the rattan chair should be remembered. After wiping it with a wet cloth, dry it with a dry cloth, because the rattan chair is equivalent to woody easy moisture. Pay attention to the maintenance of the rattan chair.