The difference between soil and mature soil

1. Different concepts

1As well asLiving soil: Alias Dead soil refers to the native soil that has not been disturbed by humans, that is, the soil that has not been turned over.For the natural soil in the wild, a loose surface layer with a large amount of plant root system can be counted as mature soil. The soil that is difficult to connect into the tight plant root is soil.

How to become a mature soil

1. Cover the soil on the soil

1As well asWhen we renovated in the farmland, we changed the practice of pushing things when the land was flat. Instead, we first collected the mature soil in the farmland and stacked aside.On a good ground, the purpose of reforming the soil with soil.

2As well asIf the area of soil there is not too large, you can also use a cooked land coverage to transform.Because mature soil is a living soil cultivated after long -term fertilization and cultivation, the soil contains nutrients such as organic matter, and beneficial biological bacteria, which is conducive to crop growth.

2. Flating and turning and drying

3As well asFor the soil farmland that takes away the mature soil, we must first flatten according to the specific situation, and then turn the land after the land is flattened.

2As well asNote that because the soil is relatively hard to make a deep turn, it is only time to be more appropriate. Through many deepenings, the soil can receive the wind and the sun and the sun, to improve the water and Fertilizer capacity of the soil, and promote the breeding of microorganisms in the soil.And the decomposition and transformation of nutrients, promote soil maturity, and be patient with soil, restoring and familiarity, and do not rush to plant crops.

Third, plant green Fertilizer straw back to the field

1As well asWhile turning the soil deeply, some beanic plants can also be planted as green Fertilizer into the soil to promote soil maturity.On the basis of the soil for a period of time, sprinkle the soil rotation and sprinkle the seeds of bean crops, so that it can grow to20 ~ 30At about or so, it is best to bury the soil as green Fertilizer before flowering.

2As well asThen, you can also sprinkle crop straw, leaves, weeds, etc. on the ground when it is turned into the soil. Pay attention to crushing the crop straw as much as possible and evenly sprinkle on the ground.Try not to make the crop straw pile up, which is not conducive to the rapid decay of crop straw.

Fourth, add Organic fertilizer

1As well asOn the basis of deep cultivation of the soil and applying green Fertilizer and crop straw, the soil has a certain degree of ripening. At this time, it can be further promoted by applying organic Fertilizers to further promote soil maturity.It can be applied to rotten livestock and poultry feces, human feces, bean dregs, oil cakes, etc. to improve the organic matter of the soil.

2As well asIf the soil is acidic, it can also be applied to plant ash or lime powder, neutralizing soil acidity. If it isThe sticky soil can also be appropriately applied to some furnaces to improve soil permeability and further promote soil maturity.

1. The life of the shade net is a few years

The service life of the Shading net is mainly related to the production materials, the environment, and the method of use. Generally speaking, the service life of the shade net ranges from 3 to 5 years, but if the production materials of the shade net are poor or the environment is harsh, then the environment is harsh, then then the environment is harsh.The service life of the shade net will be reduced a lot.

The Shading nets on the market are mainly divided into two types of production materials, one is the raw material is high -density polyethylene, and the other is the melting plastic particles melted with the two -recovered waste plastic and Shading net.And regeneration.The Shading nets produced by native materials are light, strong, strong, and durable. The service life is generally three to five years, and the price is slightly more expensive.The use of the Shading net produced by regeneration is only one to two years, and it will often be damaged after one year.

The service life of the shade net is also related to the environment and the method of use.The same Shading net will have a longer service life in the north than the life of the south. This is mainly due to the hotter weather in the south, and the sun radiation of the shade net is stronger.The internal network life of the shade net is longer than the life of the external network. The time exposed to the sun and the sun radiation intensity of the received will also affect the service life of the shade net.

Therefore, when you buy a Shading net, if you want good quality shade nets, do not greedy to buy a Shading net for cheap buying regenerative materials, resulting in a shorter service life, which will not achieve the expected results and suffer losses.

2. How to maintain a sunny net

1. Because the Shading net is made of polyester material, the texture is soft, Smooth, and durable. Therefore, it is necessary to pay attention to preservation when using a Shading net. Proper collection storage can extend the service life of the shade net, so as to achieve the purpose of multiple uses.Essence

2. When collecting the Shading net, it is best to choose it on a cloudy day, lay the net on the ground, and roll it up after drying.If there is water stains on the shade net, you need to wait for the water stains to be dried and then roll up.

3. It is important to note that the Shading net should avoid soil pollution as much as possible. If it is contaminated, it can be cleaned with a sprayer and put it away after drying.

4. Finally, the shade net should be stored in ventilation, avoiding the light, and on the shelf, pay attention to the antids and mouse bite.In this way, the Shading net can be used for a longer time.

Principles of the context planning and design of the courtyard

1. Stay on people: convenient people enter and exit and homework; leave 5 to 6 meters in front of the room to benefit the light in the room; leave 3 to 4 meters wide in the back of the house; the main road of the gate of the courtyard is 4 meters wide.

2. See seam pins: The courtyard area is limited, and every inch of land must be fully utilized.The combination of slices and scattered planting.

3. Beautify the environment: the division of the plot, the configuration of the tree species, and the method of planting can be combined with the orchard and the Park.

4. Adapt to the position: Select the appropriate tree species due to the planting location.The tall trees with high value and strong dryness and high -drying of the sidewalk, such as coriander, lychee, longan, ginkgo, persimmon, jujube, etc.;View.

5. Proper dense planting: The courtyard area is not large and can be properly planted to benefit the output rate of the unit area.The pitch of the fruit trees of the garden is 2 to 3 meters and the line spacing is 3 to 4 meters.

6. Planning dense planting: that is, first dense, then thin, take into account the production of the early and later periods.If you plan 2m 2m first, then go to a line everywhere, turn into 4m 2m, and finally become 4m 4m.

7, three -dimensional planting: In order to make full use of land and light energy, three -dimensional planting can be designed.Efficient economic crops between fruit trees and between plants.

8. Three -dimensional cultivation: Raise earthworms or repairs livestock and poultry under the grapes and kiwi sheds.Digging fish ponds in low -lying places, fish farming in the pond, and planting fruit trees.

Choosing fruit trees in the courtyard

Due to the influence of space and environment, the garden planting is different from the selected tree species and production. The following aspects should be paid attention to:

1. In terms of the size of the tree, choose a small tree species and varieties with small trees, short branches, and intermediate pits.The space occupied in this way is relatively small and does not affect indoor light.

2. Should choose tree species and varieties that are early and easy to yield.Early varieties that are easy to manage are generally easier to manage.As a result, early, seeing benefits can improve the confidence and interest of courtyard cultivation.

3. Should choose tree species and varieties with strong pollination capacity.There are many friends planted in the courtyard that the light of the garden is not resulting, but I do not pay attention to this problem.If the courtyard is large, 1-2 pollination trees can also be properly planted.

4. Choose tree species and varieties with ornamental value. Whether it is tree, tree, branches, leaves, flowers, fruits, etc., we must pay attention to this.

Payment of fruit trees in the courtyard

1. Select good varieties

Good breeds are the basis of yield and quality. fruit trees in the courtyard should choose good varieties as a key measure.Generally, you must buy seedlings with high reputation, or buy seedlings from experienced and responsible fruit farmers, so as to be reliable.Do not go to the market to buy seedlings at will. Cause trees are long -term economy crops. The varieties can be benefited for a long time. After the variety is not good, the variety must be pushed down.

2. Later

A variety has its own ecological adaptability, and good varieties must be planted under its suitable ecological conditions to exert its excellent characteristics.Our land belongs to the subtropical climate Belt. Generally, it can only be planted in some fruit trees in the subtropical area, such as citrus, coriander, etc. In the past, a few people introduced tropical bananas, longan and other fruit trees to the cultivation of our land cultivation.That's it.Apple, apricot, and Shou Tao, which are produced in the north, like to dry and cool climate, and are not suitable for development in our land.There are also species that have special requirements for soil pH values, such as chestnuts and bayberry, can only be planted in the loess Belt.However, it is not absolutely divided according to the origin of the origin. Some species have differentiated, such as peaches, pears, and persimmons.Set the planting area of persimmon and fruit trees.

3. planting timely

Evergreen fruit trees such as citrus and loquats like warm and humid climate, and are afraid of freezing damage in winter. Therefore, the planting season should be set in spring, while peaches, Li, pear, grapes and other deciduous fruit trees like dry climate.spring can be available, but it is more suitable in winter. Because the root temperature of these varieties is only 5 C or more, because the soil temperature of the winter in the winter is more than 5 C.The root system is good for the growth of the coming year.

4. Reasonable selection of "neighbors"

Citrus and orange fruit trees are generally not mixed with orange, due to orange susceptible ulcer disease.Peach should not be mixed with Li, because many diseases and Li have many illnesses easily cross -infected.Do not plant cypresses when planting pear trees, because cypress is the winter host of pear rust.

1. How to raise yellow shrimp flowers

1. Grow the soil Yellow shrimp flowers like to grow in light loam soil. Potted soil should use rotten leaf soil, rivers and sand soil, and rural soil to ensure that the soil is loose, breathable, drained, and nutritious.Before the basin, disinfect sterilization once, while adding an appropriate amount of Organic fertilizer to improve soil nutrients.

2. Light temperature conditions In the warm environment, the growth rate of yellow shrimp flowers is relatively fast, so it is better to stabilize the temperature at about 23 C.Especially in the two seasons of winter and summer, when the climate is relatively extreme, do a good job of regulation.

3. Water Fertilizer irrigation Watering and fertilization are one of the most direct ways to obtain nutrients for yellow shrimp flowers.While keeping the soil moist, water does not occur.During the growth period of thin Fertilizer, every 20 days, the diluted thin Fertilizer liquid must be applied to the main need to meet the growth of yellow shrimp.

Second, the cutting method of yellow shrimp flowers

Each yellow shrimp flower stem and branches have a pair of submarine axillary buds. The axillary buds in the middle of the branches are mature and strong. Cut the cuttings about 3 to 4 cm long and insert it in the seedbed or insert;The axillary buds are germinated and growing; can be planted in pots after one month, and the survival rate can reach more than 95%.(Note: Choose a strong two fork seedlings on the basin.)

Third, how to trim yellow shrimp flowers

Potted yellow shrimp flowers can cut pruning, and it is necessary to cut pruning during management. Branching is generally selected in spring or autumn.In spring, the yellow shrimp flower draws new branches and leaves. It should be trimmed off in time, and the sick and old branches should be trimmed off in time.autumn is the flowering period of yellow shrimp flowers. After the flowering period, cut off the residual flowers to reduce nutrient consumption and promote it to recover as soon as possible.If you are in the seedling stage, you need to talk about it in time to control its height.

1. How to install Outdoor folding tables

A family Outdoor camp can carry an Outdoor portable folding table, which is very convenient to use Outdoor folding tables to play cards, drink tea, and barbecue.How to install it?

1. Preparation before assembly: Preparation tools: cross or word screwdriver, wrench, pencil, it is recommended to use a pistol electric drill.Putting the circular fixing head into the cross -side side of the connected head in the pores is exposed, and the fixed head gap is aligned with the position of the cross section.

2. Twist the connection rod into the rising plate that has been embedded in the board. It is best not to twist to the end. Put the universal wheel with the No. 14 wrench into the mobile door marked with the drawing. You do nt need to twist to the end. The height is adjusted later.

3. Turn the handle into the tapping hand holes. Pay attention to the front and back of the door panel. There is no side of the pages. The handle screw may be too long. ThereforePut the pad between the screws and the door panel.

4. When leaving the factory, you only have a pre -drilled screw hole on the mobile door and door panels. The union holes of the two side panels and the top board are not pre -drilled. This is for buyers to install it., Can only make buyers suffer a few more screws.The screws of the fixed pages are self -attack wires. Even if there is no pre -holes, it can be conveniently screwed in with a screwdriver.

5. Inside the folding table, the top panel is exposed to the ground, and the two -piece desktop and the No. 1 top plate are connected with the unity.Move the door panel, support the desktop, insert the plug -in head into the hole on the back of the desktop, take a pencil drawing position on the mobile door and fix the insertion and the insertion eye.

6. When assembling the folding table, you should lay felt cloth or carton on the ground to avoid scratches from the table.When installing the pages, because the surface of the board is relatively hard, the screw is difficult to twist. You can hold the screws first, knock the screw with the hammer a few times, and leave the plate to leave a small hole in the depression, so it is easy to twist.

The above is the installation method of Outdoor folding tables. Different outdoor folding table installation methods may be different. However, the installation instructions will be accompanied by the general purchase, which can be installed according to the instructions.

2. What are the precautions for installing Outdoor folding tables?

1. Do not get started to install the outdoor folding table. First look at the installation instructions and install it according to the manual to avoid being installed casually. Otherwise, it is troublesome to disassemble or remove it.

2. Before installation, you should carefully see if the parts and the installation tools are complete.

3. During installation, screws, connecting rods, etc. The parts that need to be twisted should be screwed in place, so as to be firm.

4. After the installation is completed, you need to test it to see how the weight is, whether it is strong, and inconvenient to folder.