Articles in Categorys Balcony Garden

1. Troubleshooting device fault characteristics

Failure 1: After installation, the headlights work normally, but the instrument Taiwan big light fault alarm Lights are on

This is a very common failure. It may be because the pyrine lamp and the stabilizer are not matched. You should choose the same voltage of the pyrine lamps and stabilizers.

Failure 2: After installation, the Light bulb has a flashing flashes or often off or the left and right Lights.

Most of these causes of failure are line problems, which may be caused by the stability device's start -up current.At this time, the working current of the headlight line needs to be checked normally.

When the stabilizer squeaks in the work, this is the sound of the transformer work inside the stabilizer. This situation is normal.However, the sound is too loud, and the cover can be heard outside, it means that there is still a quality problem in the transformer. Please rest assured that this will not affect the use. If it is serious, replace the stabilizer.

2. Method of determining whether the stabilizer is damaged

1. When the lamp is not bright, twist the Light bulb to replace the new Light bulb. If the new Light bulb is on, it is the problem of the bulb; if it is not bright, there is a problem with the stabilizer.

2. Check the interface of the stabilizer line beam. If the socket has a loose or a problem with the line, the stabilizer will fail; if the plug is normal, it is the problem of the stabilizer.

3. How to detect good or bad on the airlight lamp

1. Bullet test

(1) Different way

a. Whether the electrodes of the two ends of the light ball have a serious loss.

b. Whether the ceramic Tube has broken and broken.

c. Whether the visual wire wire is broken.

d. Whether the visual lamp Tube is broken and damaged.

e. Whether the lamp Tube column is broken and broken.

f. Whether the visual lamp is loosened or not.

g. Whether the base is loosened and falling off.

h. Whether the Light bulb power line has a loose and falling off.

i. Whether the light ball has cracks or rupture.

(2) Test method

a. Take a good Ballast as the benchmark for testing HID Lights.

b. Prepare a power supplyer and adjust its voltage to 13.20V as the test benchmark voltage.

c. Pick up all wiring first and turn on the power supply to test whether the Light bulb will light.

d. If the power is turned on and cannot light up the HID light, it means that HID is damaged.

2. Stability device test

(1) Different way

a. Whether the visual power line group is destroyed or damaged.

b. Whether there is a destruction or damage to the visual control line group.

c. Whether the high -voltage line group is destroyed or damaged.

d. Whether the high -pressure box line group is damaged or damaged and leaked.

e. Whether the body of the stabilizer is destroyed or damaged and leaked.

(2) Test method

a. Take a good HID light as the benchmark for testing Ballast.

b. Prepare a power supplyer and adjust its voltage to 13.20V as the test benchmark voltage.

c. Pick up all wiring first and turn on the power supply to test whether the Light bulb will light.

d. If the power is turned on and cannot light up the HID light, it means that Ballast is damaged.

e. If you turn on the power to light up the HID light, it means that Ballast can light up, but you need to check how much its power input current is to determine whether the function of the stabilizer is normal.

The determination benchmark is as follows:

Normal input current range between 3A-5A.

Greater than 5A indicates that the work efficiency of the stabilizer is reduced, resulting in increased consumption power and decreased reliability.

Smaller than 3A indicates that the work efficiency of the stabilizer and the decrease in reliability may cause the Lights to light up.

Moss micro -landscape production method

Moss Micro Landscape Production Step: Put the light stone layer

Choose the diameter of the light stone about 3 ~ 6 mm. Since the glass bottle does not have a bottom stomach, the effect of the light stone layer is as the bottom breathable water seepage layer.When the light stone is laid, it should be as flat as possible. Don't be too high. Of course, according to the composition, the light stone is best to spread two layers. First, it is large particles, and then small particles.

Moss Micro Landscape Production Step: Play Water Moss

1. The role of laying water moss is to beolate, mainly to prevent soil from being penetrated into the light stone layer due to watering or rainwater. At the same time, we can also isolate the water storage and slowly supply water to ensure that the roots are not flooded.Here we tear the water moss into a small piece and a small piece, fluttering on the light stone layer, just a thin layer.

2. After spreading, spray the water moss and wait for it to slowly swell. At this time, the water moss is flattened with your fingers.

III moss micro -landscape production step: laying planting soil

1. To raise plants, soil is the key. The appropriate pH value, good moisturizing power, and certain nutrients, thickness and softness of Chengdu are important factors affecting plant survival and growth.Therefore, you should choose a plant that is more suitable for the growth of negative plants such as moss.

2. Put the amount of soil on the water moss and make a slightly slightly high slope of the front and rear, about 8 mm in front, and about 16 mm in the back.Then spray wet planting soil, but pay attention to controlling the amount of water. Do not exceed the light stone layer.

Moss micro -landscape production steps: planting background plant

This is the step of sowing. Those who have experience can be based on their own love, free creation, and their own small production. However, if novice, it is recommended that you install the steps provided by the shop to complete.

1. First use tools and other tools to dig a small hole on the soil, set the prepared plant root, and then pinch the mules, plant it in the soil, and reasonably surrounded the soil to ensure that plant planting is safely stable.In addition, the stems and leaves of plants are recommended to the super -view port.

2. Since it is a background plant, we must plant it in the back of the picture, but we cannot plant the roots to be planted, but the stems and leaves of the plant can be stretched in the upper part.

3. All plants can be trimmed appropriately when the branches and leaves are too large and too long, but do not hurt the main stem.In the case of too long, you can also trim it moderately, or gently roll the roots to the lower end of the main stem, pinch with a mule, and plant it into the soil.

Moss micro -landscape production steps: laying moss

1. clean the moss and divide it into several parts according to the requirements of the laying of your own design.You can lay some props, such as houses, rivers, and so on. After the moss is paved, remember to spray water again so that the moss can fully swell.

2. After the moss expands, you need to gently press it with your hands, so as not to leave the edge to leave a gap.

Moss micro -landscape production steps: laying river sand

1. Powder river sand with the reserved place to create a stream and the shallow beach in front.

2. In this bonsai, in order not to affect the previous work, vine plants have also been planted at this step.

3. It has become a scene. At this step, most of them have been successful.

Moss micro -landscape production steps: Place dolls and mushrooms

We need to play freely at this step. You can put the doll in your expected position according to your own understanding, and imagine the fairy tales in the scene. There are more artistic conception and interest.

Summarize: Above we briefly introduce you how DIY has fun moss micro -landscapes. If we put a pot of our DIY moss microman landscape at home or office, when we are tired and fatigue, I can see the green color carefully designed.Let us escape complication and hustle and bustle, and walk into a natural small ecological zone.

Moss micro -landscape maintenance method

Daily maintenance method

Light: Moss is a yin -ray plant. The demand for light is not so strong. You can place the bright scattered light throughout the day in the room, or the sun will be exposed in the early morning and evening.But it should be noted that it must not be exposed to the sun at noon.

Water: Moss is a plant that absorbs moisture directly by leaf surface. When watering, moss spray the leaf surface, and other plants spray the soil surface to prevent other plants from rotten leaves.

Although moss likes humidity, too much watering will also get sick, so watering should be appropriate.Daily maintenance can be done a little bit, and don't be too damp.The natural drying and dormant moss can be restored with water permeability, but the moss that is wet for a long time is easy to damage once the temperature is not suitable.

If the leaves are stained with water on the inner wall of the glass, the two are separated, otherwise the leaves will rot and stick to the inner wall of the glass.

Temperature: Most areas in China are suitable for moss growth, and the best temperature grows between 5 C-28 C.

Soil: Although moss in the micro -landscape does not require the soil, it is still recommended to use special cultivation soil, because this soil is not easy to mold.

Ventilation: If it is a sealed glass bottle, it is recommended to open it for several hours a day to make the plants breathe and increase air circulation.

Moss disease maintenance

Black: It is usually too little watering, or the open environment is too dry. You only need to replenish the water in time.

Yellowing: There are many reasons for the yellowing of moss. Generally, the conditions of light are not suitable. The soil is not suitable for moss growth, or the air quality is not good in an open environment.

Black: Usually, because the watering of the moss is soaked in the water, it starts to become black and rot.At this time, watering should be stopped and placed in a cool vent. If there is still too much water, you should slightly tilted the landscape, and then use a paper towel or water absorption cloth to absorb excess water.

Surface mold: This situation is generally due to poor ventilation. If it is not particularly serious, it should be placed in a cool and ventilated place, spraying bacteria reagents and accepting the morning and evening sunlight for sterilization and disinfection; in severe cases, it is necessary to change soil treatment.

1. Can general nutrient soil be used directly?

Try not to use the general nutrient soil.

General Nutritional soil is generally composed of fat field soil and rotten Fertilizer.Nutritional soil is a kind of soil specially prepared to meet the growth and development of seedlings. It contains a variety of mineral nutrients, loose ventilation, strong water and Fertilizer ability, and disease -free pests.Nutritional soil requires high organic matter content, complete nutrients, reasonable soil structure, and active microorganism.

General Nutritional soil is a good thing, but in general, the permeability and water retention of nutrient soil we buy are good.We must choose nutrient soil according to the habits of plants.However, according to the dry and humidity of soil water, especially some flower watering frequency is too high, it is easy to rot. If you are raised indoors, the pot soil is dry and slow, it is not suitable for the use of Nutritional soil.Persons to increase its permeability.Prevent the soil of the basin.In other words, we mix the soil according to the habit of flowers and mix water according to the habit of flowers. That is the best.

2. What is good for cultivating soil sterilization?

Because germ spores, insect eggs and live body, and weed seeds are often contained in natural soil, the prepared culture soil needs to be disinfected to achieve the purpose of eliminating germs and pests.The common disinfection method has the following:

1. sunlight disinfection method

Put the prepared cultivation soil on the clean cement floor or iron plate thinly, and expose to the sun for 2 to 3 days under the scorching sun.For example, in the summer, a large amount of germs can be killed, mycelium and pest eggs, and nematode.Although this method is not strict, it is simple and easy.

2. Heating and disinfection method

There are many methods for disinfection of soil disinfection, including cooking, high -pressure heating, and steam heating.As long as it is heated to 80 ~ 100 C, it can achieve the purpose of disinfection for 30 to 60 minutes.However, the heating time should not be too long, otherwise it will kill the beneficial microorganisms that can break down the Fertilizer, and therefore hinder the normal growth and development of flowers.If family flowers do not have a heating equipment, you can put the prepared culture soil into the iron pot, fry the stove for 20 minutes, or steam it in a high -pressure cooker for 10 minutes. It can also receive the effect of disinfection.

3. Pharmacy disinfection method

Commonly used Femarin with 40%formaldehyde to disinfection, sprinkle 400-500 ml of water in the soil of cubic meters of cultivation soil, and adds a diluted liquid of 50 times water, and then accumulates the soil, cover the plastic film on the top, closed 48After hours, remove the coverage and spread out the soil. After the Galmarin gas is completely volatile, it can be used.It can also be used with 50%bacterial spirit 50 grams or 65%Daisen zinc 50 grams, mixed with 1 cubic meter of cultivation soil, and after 3 to 5 days, the drug is volatile for one week.You can also use 0.1%to 0.5%potassium permanganate to pour stuffy for 2 to 3 days.

1. High installation of clothes hooks

1. Xuanguan

You can judge according to your family's height, so that everyone can get items. Generally, it is better at about 1.6 meters.It should not be too low, so you need to bend over with things, and if the clothes and buns are too long, you will mop the floor.

2. bedroom

Like in the porch, the height is more convenient to get items. Now there are coat hooks that can be hung directly at the top of the door, and the door of the bedroom will not be particularly high, so as long as you do not install too low.It is recommended to be a little taller than yourself, so as not to accidentally hit the hook.

3. bathroom

The installation height of the bathroom hook is also very important.Generally speaking, the installation height of the bathroom hook can be determined according to the height of the family, usually with 10 mm on the basis of the minimum member height.Such height will be more convenient when using a coat hook.You can also install the hook on the right side of the mirror to make the towels more comfortable and convenient.

2. How to install the hook

1. Positioning

The installation position of the hook must be determined, including width and height.There are single -clothes hooks and row hooks. When installing a single hook, a few clothes hooks are usually installed into a row of combinations. ThereforeThe width of the installation surface is reasonably calculated, and the distance between the single hook is divided to ensure the beauty after installation.The rowing hook does not have a width trouble. As long as the width of the installation surface is sufficient, it is generally installed in the middle position, so that the distance between the left and right sides is equal.

For height, it refers to the height of the hook from the ground. Generally, the height of the family is used as a reference. It is advisable to be about 1.5 meters to 1.8 meters.Beautiful; if it is too high, you need to stomach or step on a small bench to hang, so it is inconvenient to use.Therefore, the installation position of the positioning hook is very important.

2. Pole

After determining the installation position, it is best to draw the hole position with a marked pen, and how many holes are needed.Then use an electric drill to punch.However, pay attention to the size of the hole, and generally refer to the size of the hole on the hook.

3. Fixed

After the holes, you can put the expansion bolt into, or the wooden pillow, and determine the corresponding bolt according to the material of the coat hook.Then align the hook to the bolt, and finally use the screw to tighten and fix it.However, when the screws are screwed, pay attention to the flatness of the hook, which must be kept horizontal with the ground, and it must not be skewed, otherwise it will affect the effect of the clothes hook and the beauty of installation.

pet Dog training

1. Train Dogs sit down

At the beginning of the "sit down" order, the Dog cannot understand. You must press down halfway behind it with your hand and issue a "sit down" password.Essence

2. Teach and handicraft

It is determined that the Dog is very familiar with the passwords and actions that can be implemented before it can be implemented. When it is sitting quietly, please lift your left hand or right hand, shouting handshake passwords, repeated implementation, wait for the love Dog to experience and listen to his handshake handshake.The password is completed.

3. No instruction

When you see the Dog's behavior, you should stop it immediately.And send out the "No" password, let it know that this behavior is not possible, and will be scolded by the owner.

4. Good praise for use

If the Dog has a good performance or behavior, you must immediately praise it to send a "good" password, and touch his head or neck to let the Dog understand the owner like this action.

5. Temporary stop action

"Wait" this command is to temporarily stop the Dog's action.When eating, place the food in front of the Dog, and then give the "waiting" password for such repeated training.

6. Dogs follow closely

When the Dog immediately approaches because of the call, he immediately praises it. If the Dog can't come or run, don't be angry.Try to keep the Dog and you keep within a distance of no more than 10 meters.Detailed

pet cat training

1. pet cat training handshake method

Prepare the snacks that cats such as fish and meat, and other cats like cats, put some meat fragrance on the right finger, shouting the cat to come over, stretch out the right hand to smell the fragrance, and say "handshake, handshake", the cat will reach out to smell the taste in your handAt this time, the cat was raised, the cat stood and stretched out the front paw, took the opportunity to hold the cat's right claw, and at the same time said "handshake", "handshake", and handed the food to the cat with your left hand.When training cats and people, pay attention to the kindness and tenderness, so that you can master a few Tmalls and you can master it.After that, you only need to use food to consolidate the results of pet training.Usually, as long as you say "handshake", pet cats will naturally stretch out its paws to shake hands with you.

2. pet cat training fixed -point excretion method

First of all, you must train pet cats to have a regular habit of Lazar. Usually, the cat sand pot is placed in the bathroom and closed the door to prevent pet cats from entering and exit at will.Afterwards, find a small plastic pot that can be placed in the toilet steadily, and still put a small amount of cat sand in it, so that the pet cat is convenient and adapt to it.Then gradually reduce the amount of cat sand, until there is no cat sand at all.Of course, pet cats still want to plan things. At this time, a small amount of paper chips can be replaced. In the end, there is nothing. When the cat adapts to this method, a hole is cut on the edge of the bottom of the small basin.You can flow out smoothly.Stool only needs to be rushed into the stool pool with water. pet cats lake both the house without odor and scattered sand.pet cats are more cute, and the expenses of Cat sands are also saved every month.

3. pet cat training can not go to bed

If the pet cat also likes to go to bed or drill a quilt during the day, you can pat the hip of the pet cat, and reprimand it loudly to drive the pet cat out of bed.Because pet cats are sensitive to the owner's emotions, so that the bad habits of pet cats to bed after repeated multiple times can be changed.If this method cannot work, the owner can also try the following method: prepare 2-4 toy water guns in advance.When the pet cat is found to go to bed, the owner can stand in a place where the pet cat cannot see, spray the pet cat with water gun full of water, and the pet cat will escape immediately by the sudden attack.Go to bed.It is worth noting that it is not possible for pet cats to find people spraying water at it, otherwise, this method will be difficult to achieve good results.

4. pet cat training does not catch furniture methods

Before training, prepare a wooden pillar, 70 cm long, and about 20 cm thick. It is more appropriate. It is fixed near the Cat's nest to facilitate the cat grip. The texture of the wooden pillar should be solid.Training should start with a kitten.During the training, bring the kitten to the wooden pillar, grab the cat's two front legs with both hands, place it on the wooden pillar, simulate the cat's grip, so that the secretion of the cat's gonad body can be appliedOn the wooden pillar.After many training and attraction of secreting liquid smell, the cat will go to the wooden pillar to catch it.To develop such a habit, it will not catch the furniture anymore to protect the neat and beautiful of the furniture.Detailed

pet rabbit training

1. Training rabbits to the toilet:You can use newspapers to contain some excrement smells in a place where rabbits are convenient, and then put the smell of newspapers on the toilet you are ready.Seeing the rabbit's movement when he was excreted, he immediately hugged him/her to your toilet.Repeat a few more times, he will probably learn.

2. Training rabbit back:When I was a child, I had to spend at least a period of time in the rabbit cage every day. I could put the rabbit out in a fixed time, and then put it in fixed time. Let him develop the same habit in the cage as it is outside.During this time, you should do it completely in the cage. Do not eat when you place it outside the cage, so that he knows that only food in the cage has food.

3. Training the memory of rabbit:The wisdom of pet rabbits is equivalent to a 2-3-year-old child.It can remember the general content and meaning of people talking to it, and it can also remember the content trained by the domestication.pet rabbits that often communicate with the owner can understand the owner's words.For example: eating, sleeping, returning nests, Running, jumping, and so on.pet rabbits are not really understanding the meaning of language, but it will remember that you speak the strength of the words and words in each different language, and to judge the meaning of your words.Understand what it should do and not to do in your speaking tone.Detailed

Hamster training

1. Training to the toilet:Hamsters have a habit of excreting feces in the place where they used to toilet. It is a very clean animal, so it is easy to train hamsters to the toilet.As long as the place where the often excreted is used as the place where the toilet is located, the hamsters can be induced to go to the toilet in one place.As long as the cork, cat litter, and newly replaced with newly replaced cork and cat sand are mixed when cleaning, and the hamsters will continue to the toilet in a tasteful place.

2. Training and feeding:Frequent hamsters that are fed with one hand to make hamsters get used to your taste. Pay attention to hamsters as a very timid animal, so do not move too reckless to avoid scaring.In addition, you can also feed the name while feeding. After a daily fixed time, you will remember the name and know that you will eat.Detailed

Parcel training

1. Training for shaking hands of parrots:Generally, our parrots have their own names. Every time we train, we call its name first, and then talk about shaking hands with hands, gently picked up the parrot's right foot and shake it up and down, and then put it down immediately.The seeds you eat, the general bird training will be a few times.

2. Salute training:Gently lift the parrot's right foot with your hands, and at the same time, we will salute, but it is higher than when you are shaking hands, raised to a certain extent, and immediately rewarded its favorite seeds. At first, the bird was a bit unwilling to let you move.His feet, just train a few more times.

3. Training of loved ones:Let the bird stand on your hand first, raise your hand to let the bird's mouth and your face touch and talk about me, and reward immediately (pay attention to raising your hand while your face also needs to put on the bird's mouth, Must sound and move at the same time).Detailed

Turtle training

Turtle training method:The owner trains the little turtle before eating.When the little turtle is hungry, every time you touch it, you will feed it food. Over time, when someone touches and teases it, it will not be afraid of people, thinking that it will give it food.Generally, 2-3 months of Turtles adapt to the environment and the host interaction.Every time the owner is fed, put the turtle on the table or hand. When he catchs him next time, he knows that it is time to eat.Every time the owner feeds the food, he shakes out the sound with a small bell, and when he sees it at Xiaoling, he will feed it. After half a year, the little turtle will hear the bell swimming.EssenceThe owner often accompanies the little turtle next to the turtle, and can also take it out to talk to it to let it adapt to the existence of the owner.Then when it was hungry, the owner fed it with his hands to eat. He persisted for a long time. When he saw the host beckon, he would swim.

The domestication method of wild Turtles:Wild Turtles are happy, afraid of frightening.If they suddenly change their living environment, the phenomenon of "refusal" often occurs.Therefore, the newly purchased wild turtle must be artificially "domesticated" to change its wildness and make it adapt to the new environment. Therefore, after the turtle enters the pool, avoid changing the breeding pool frequently to prevent the turtle from being difficult to adapt.The layout in the container should be imitated as much as possible. If the large area of the area should be built, the two stools should be built, and some weeds are planted on the "land". The small cylinder with a small area can be placed in the water and the cobblestone and water plants are convenient for the turtle climbing.In the first two weeks, the turtle should be placed in the dark.Because the turtle is the most susceptible to frightened, it is especially sensitive to vibration and touch.Therefore, the breeder should often contact the turtle, touch his body, and use a soft brush to clean the dirt on it to gradually adapt to contact with people and reduce its "fear".Detailed