Articles in Categorys Balcony Garden

1. How to repair electric scissors

Electric scissors are driven by electricity. If it is not used properly or used to cut inappropriate things during use, it is easy to fail. Don't worry.sales of the situation.Of course, if you don't know how to repair electric scissors, it is recommended to let professionals repair it.Common causes and maintenance methods of electric scissors are:

1. The battery cannot be charged normally. It may be because the battery does not match or the charger does not match or voltage. First check whether the battery charger is a charger attached to the product, and then pay attention to whether the charging voltage is consistent with the voltage on the nameplate. IfIf you have any problems, replace the charger or adjust the voltage in time.

2. When you accidentally put the non -cut object in the incision, the sword will be closed and cannot be operated. At this time, you should immediately release the trigger, and the blade will automatically return to the open state.

3. When the branches of cutting are strong, the swords are closed like the above situation. The solution is to release the trigger.

4. If the operation is not caused by the operation, the battery is sprayed with liquid. At this time, pay attention to turn off the switch in time, and be careful not to get the liquid. If it is accidentally stained with the liquid, it should be cleaned immediately with water. In severe cases, you need to seek medical treatment.

two,How to maintain maintenanceElectric scissors

Electric scissors are more convenient to use, but if you do nt do daily maintenance, if you do nt perform regular maintenance, it will be damaged or causing a reduced service life. The maintenance and maintenance method of electric scissors is:

1. Before each charging, let the electric scissors pass and power, and the trigger will be dried for about 50 times, so that it will practice working normally for about 5 minutes.

2. After the electric branches and scissors are used, be sure to scrub the blade and fuselage with alcohol to remove wood shattered and other dirt.

3. When not using electric scissors for a long time, be sure to pay attention to the maintenance of the battery. It must be charged once a month to avoid the battery life.

4. Put the electric pruning and battery in a cool place during storage. The temperature is not higher than 30 degrees Celsius to avoid sun exposure.

5. Do not put the electric scissors battery in scissors for a long time. Because the time is too long, it will cause the battery to soften and flow out of harmful substances. Therefore, it is best to remove the battery alone when not in use.

Hanlan's breeding method and precautions

1. Soil

Hanlan is suitable for growing in soil with loose and breathable and well -drained. When planting, it can use 40%of river sand, 35%of black humus soil, 15%of the wood chips, and 10%of fern roots mixed with soil.Cultivate the diarrhea and disinfection to avoid cold orchid infection with diseases and insect pests.

2. Light

Han Lan likes to grow in a half -yin environment and is not tolerant.Therefore, when maintenance, pay attention to lighting, usually placed in the semi -yin, and the weak astigmatism can meet the demand for light.If the light is too strong, the plants are prone to sunburn, which will affect flowering.Usually it is placed in the astigmatism in spring and autumn.

3. Temperature

Hanlan's high temperature resistance and cold resistance are not strong, and they are more sensitive to temperature.I like to grow at a temperature environment between 18 degrees and 28 degrees.In summer, temperature should be controlled at high temperature, spray water, and ventilates, so that the temperature is below 30 degrees.Move to the room at low temperature in winter, and the temperature control is above 10 degrees to avoid frostbite.

4. Watering

Han Lan likes the environment with high humidity. During the maintenance period, watering, spraying water, and maintaining a certain humidity should be maintained.Especially in summer high temperature, when the climate is dry.However, it should be noted that the amount of watering should not be too much. There must be no stagnant water in the soil, otherwise the root system will be easily rotten.Especially in winter, water control must be controlled in low temperature environments.

5. Fertilization

Han Lan has less Fertilizer, and only needs to apply diluted liquid Fertilizer every ten days in the peak growth season.You can also use leaf spray to add leaf surface Fertilizer to Hanlan, which can make the leaves of orchids more green and strong, and prevent root Fertilizer.

6, humidity

Han Lan likes the growth environment with a slightly dry pot soil and a large air humidity.Therefore, it is planned to plant 55%-75%during the day, and the relative humidity of not less than 80%at night can be used. It can be used with humidifiers, automatic spraying, Hanging water curtains, sprinkler on the ground, and moisturizing pools or water basins.The humidity of the air should be maintained between 65%and 85%, and the air humidity during dormant during winter should be 50%-60%.

7. Pests and insect prevention

(1) anthracnose

Timely cutting the disease in time and burning the diseased body.

The method of improving watering is to inject the water from the edge of the Flower pot.

Spray 50%of the 500-600 times liquid at the beginning of the onset, while strengthening ventilation and light transmission to avoid leaf surface spraying.

(2) Leaf blight

Remove the diseased leaves and the diseased body concentrated and burned.

Pay attention to ventilation and light transmission to prevent excessive watering, and avoid spraying plants directly.

Use 50%todtin 600-800 times liquid to spray.Once every 10 days, it can be sprayed 3-4 times in a row.

(3) White silk disease

Timely remove the diseased leaves, diseased plants, and disease points in time, which can be disinfected by lime; 1000 times the water removal agent of 30%soil seedlings is drenched with a 30%soil seedlings.

1: 500 times perbal -clearing the leaves and roots at the beginning of the onset.

(4) Sicatinworm

When a small amount occurs, it can be removed with a soft brush and then cleaned with water.

For more than a long time, it can be sprayed with 40%of the rapid emulsion 1000 times solution during the incubation period.The positive and back of the leaves should be sprayed on the back of the medicine for 3-4 times in a row. Each interval is 5-7 days, it is basically extinct.

(5) Red Spider

The quantity is small, and you can use a brush or a small brush to remove.

Most of the 40%trichlotate is killed by 1000 times liquid.

The soil method is lit with a plate of mosquito coils, placed in the basin of the diseased plant, and puts it in a pot with a plastic bag. After 1 hour of smoke, it is killed, regardless of eggs or adults, and does not affect the plant.

Profile

bamboo is also known as cloud sheet pine, stabbed winter, cloud bamboo, mountain grass, and chicken velvet.climbing plants can reach 3-6 meters high.The roots are slightly fleshy and slender.There are many branches of the stems, and the branches are Smooth and Smooth.The leaf-shaped branches are usually clustered every 10-13 pieces, rigid, slightly three edges, 4-5 mm long; scales-shaped leaf bases are slightly thorny or not obvious.flowers are usually axillary every 1-3 (-4), white, and short stalks; flowers are about 7 mm long.The pulp is about 6-7 mm in diameter, purple and black when cooked, and 1-3 seeds.

Native to southern and eastern Africa, distributed in central China, Northwest, Yangtze River Basin and all over the south.Its sex is warm and humid and semi -yin -ventilated environment. It is not resistant to cold and drought in winter.

Wenzhu is a very high ornamental plant that can place the living room and study room, adding the aroma of books to the room.

Nickname

Cloud sheet pine, thorny winter,Yunzhu, mountain grass, chicken velvet.

variety

Fine leaves Wenzhu, Dwarf bamboo, Da Wenzhu.

Suitable place

1. Place the popularity of the living room

The living room often entertains guests, relatives, and friends. It is a place for improving interpersonal relationships. If you place the bamboo in the living room in the auspicious position of the living room, it can conducive to the adjustment of interpersonal relationships, avoid various contradictions, and can also benefit the harmony of family relationships. Husbands and wives, children are obedient, filial piety.As the saying goes, and the fortune is also beneficial to wealth.

2. Putting the bedroom is good for health

Healthy transportation is very important. If the housing layout is not good, the bedroom pattern is improper, it is easy to cause various diseases. There are many evil spirits. In the bedroom, we can not only cultivate sentiment, calm your mood, peace, and keep your mind. It is conducive to physical health, can alleviate various respiratory diseases, and help treat insomnia and depression.

3. Place the study and work efficiency of studying and work

Wenzhu can also be placed in the study, which has the effect of improving learning ability and improving work efficiency.Most scholars like to put Wenzhu in the study room, can flatten impatient emotions, concentrate on learning, but also resolve all kinds of evil spirits and evil spirits in the room.The placement of Zhizhu should be particular, and it is not advisable to place the desk to avoid accidental collision and cause drop.

Putting bamboo at home can facilitate Feng Shui, or can be placed in the office in the office. The position should be appropriate. It should not be placed in a place where it is too high and it is not easy to fall.

Effectiveness and role

Medicinal value

bamboo grass and root can be used as medicine.The root of the bamboo can moisturize the lungs and relieve cough, and can be used to treat lung cough, cough, phlegm, and dysentery.The whole grass of the bamboo can cool blood and detoxify, diuretic and diuretic, and can be used to treat stagnation and cough, urination, and so on.

Viewing value

Wenzhu is a small plant with high ornamental value. It is mainly based on potted leaves. It is light, chic, and elegant. It is a favorite leaf watching flower, especially in the study, case, bedroom, and living room. Potted texts, with a bronze Flower stand, appear elegant, chic, generous bamboo in the four seasons of evergreen.The slender is like a feather leaves. If it encounters flowering, although the flowers are white, the stars are a bit, in the green bushes, it looks elegant and cute, but its fragrance is very rich.

Breeding method

illumination

The environment of the Zhizhu likes to be in a glowing environment is best placed in a scattered room. Except for winter, the rest of the season cannot be placed in a place with direct sunlight. Especially in summer, you must not expose the sun.During the flowering period, they are afraid of wind and rain. At the same time, they should pay attention to good ventilation, otherwise it will cause fallen flowers.

Humidity/watering

Wenzhu likes to moist, but avoid too much watering.Because more water can rot the root system.The higher the air humidity, the better. When the weather is hot, it is necessary to spray water around the ground and leaves around the plant to increase the humidity of the air. The pot soil cannot be too dry.

Watering method: Pour water once 3-5 days in spring and autumn, and water once every 2 days in summer. The temperature in winter is low. To reduce the amount of watering, so as not to freeze the root stems. At the same time

temperature

The warm environment of the bamboo is 15 C-25 C. The temperature will stop growing when the temperature is higher than 32 C in summer.It is best to keep the temperature above 10 C in winter, and it will be frozen than 5 C.

soil

Wenzhu likes to loose and fertile soil. At the same time, Wenzhu has high requirements for drainage. It is best to choose loose and good drainage soil rich in humus and soil rich in humus. You can add a little Organic fertilizer to the soil. More conducive to the growth of plants.

Fertilize

Although Zhizhu is not a Fertilizer, Fertilizer cannot be lacking.Fertilization should be thin and diligent. Do not apply thick Fertilizer, otherwise it will easily cause yellow branches and leaves.In the spring and summer growth season, nitrogen fertilizer is the main, and the rotten liquid Fertilizer can be applied once a month.When the plant is set, it is necessary to properly control the fertilization to avoid long -term and affect the beauty of the plant type.

Frequently problem handling

Method of breeding in bamboo

1. Sowing and breeding

Sowing and breeding is the main method of breeding of bamboo breeding. The most suitable sowing time is from March to April of spring.

Sowing method: Rub the peel of mature bamboo seeds, dry them clean, and then sow.After sowing, it will germinate 30-40 days.

2,Divide

The cluster of the bamboo bamboo is very strong. The bamboo that is more than 3 years will germinate a new seedlings at the root. When the small plant grows, it can be propagated by a branch.Take the bamboo from the Flower pot, and the sharp sword will divide the clusters and roots into 2-3 bushes, so that each cluster contains 3-5 buds, and then plant the pots to get new plants.

What to do if the bamboo hair yellow hair

1. It must be due to strong light, because the bamboo is a semi -yin plant. If the sunlight often illuminates the sun, especially the strong light in summer, then it is yellow, and the chlorophyll gradually decreases. Solving this situation can be placed to put it to it to this situation to it.Real places, then replenish water regularly.

2. Random watering or irregular watering may also cause this situation.Because the flowers with too much watering cause water accumulation, the water is too little water, so it rarely dies, so the general watering rules are dry sand, so watering and wetting until the soil is wet.

3. Inappropriate fertilization can also cause this situation, because many people think that more Fertilizer president is faster. In fact, it is found that it is long. Fertilizer is generally selected.

4. Wenzhu is more sensitive to smoke and dust. As long as it is placed in some harmful gases, there will be a phenomenon similar to poisoning. The leaves gradually become yellow. Generally, stay away from these places and then sprinkle water. This can effectively avoid it.dust.

5. If there is a pest, then the bamboo must definitely turn yellow.Especially the scriptworm, a certain drug assist is required.

6. winter is the easiest time to turn yellow in bamboo, so when there is sunlight in winter, you must put it out and expose it, but it is necessary to ensure that the temperature should be above 5 degrees Celsius.

Plastic surgery method

1. Potting control method

The size of the Flower pot and the plant should be 1: 3, so that the growth of the root system can be limited and the size of the plant type remains unchanged.

2. Take away the growth point

When the new buds grow to 2-3cm, picking the growth point can promote the regeneration of branches and blades on the stems, and can control its non-vine, so that the leaves and leaves are flat, and the plant shape continues to be plump.

3,Utilize the lightness of the bamboo

Turn the direction of the Flower pot in a timely manner to correct the growth shape of the branches and leaves and keep the plant type unchanged.

4,Object covering method

That is, pressing the branches and leaves with a hard paper or covering the sun, so that when the branches and leaves grow, they encounter the object to block the stalks or bending and grow, so as to achieve the purpose of the shape.

5. Comprehensive styling method

Tower type: Choose 2-3 tall and tall and beautiful stems as the main peak, remove the growth points of each of the stems, and the height is 30-35 cm.The remaining branches and new stems should not be higher than the main peak.For the new buds, the thickness of its stems can be determined whether to take the growth point.If the stem is thicker than the stem of the main peak, it should be taken away.At the same time, it is necessary to use objects to cover the plant and its own light.

Double cluster: Plant one high, one low in the pot, and two lows, the high, about 30 cm high, and the low of about 18 cm. During the growth period, it can be shaped like a tower -style bamboo.

Natural style: mainly based on the natural growth of Wenzhu, and still adopts the basic methods such as picking up growth points, covering and using its lightness, so that the leaves and leaves are stretched, giving people a natural beauty.

precautions

1. If the new branches are yellow, the rotten liquid Fertilizer or 1000 times Urea solution should be chased 1-2 times, and the morning and evening light should be appropriately increased.

2. The characteristics of bamboo are warm, love humidity, half -yin, not cold -resistant.The Jiangnan area cannot overwinter.Potted bamboo summer autumn needs to be placed in a semi -shade where it is not directly exposed to the sun, and in winter, it must be placed in the south of the room facing the sun.

3. Potted bamboos need to be cultivated in sandy soils that are loose, well drained, and containing humus.It is best to cultivate a mud tile pot with good water drainage and gas. The lower layer should discharge sand and stones as the drainage layer.

4. The most critical problem in the management of potted bamboo cultivation is fertilization and watering. Avoid rain and direct sunlight.Do not apply heavy Fertilizer during the growth period. The growth of the seedlings should be appropriately applied to the thin light Fertilizer to control the nutrients, which does not make the plant excessively long and keep the plant shape beautiful.Generally speaking, every 7 to 10 days apply a full fermentation and rotten liquid cake Fertilizer (bean cake or vegetable cake). The concentration is appropriate to be 30 % Fertilizer and 70 % of the water.If the plant grows strong, when the vines grow, you can stand a bracket or properly trim and plastic surgery.

5. Although the bamboo bamboo is moist, but avoid excessive watering, and the water is too much. The water in the pot cannot be discharged for a while.Smooth water, dry on the pot can also cause yellow leaves or burnt tips.Therefore, whenever you see the soil surface, you need to pour water.The criteria for mastering are after the water is poured through, and the water can quickly discharge from the bottom of the basin.It is best to grow slightly humid in the high temperature growth season, and the low temperature dormant season is dry.In summer, high temperature weather should be sprayed on the leaves, and the leaves can be washed with water with similar water in winter to keep the leaves clean and full of anger.

1. Method of breeding of leaf wood

1. Soil: The soil is fertile, humid, and well -drained soil.Potted plants can be mixed with 3 parts of garden soil, 1 part of the pile, 1 part of river sand, or 3 parts of rough peat, 3 parts of corrupt leaf soil, and 2 parts of sand as a matrix.

2. Sunshine: The range of leaf wood is wide to the light, but the sufficient sunlight is conducive to promoting its good growth and obtaining higher ornamental value.Therefore, in addition to proper shade in the summer strong light, the color of the blades in spring, autumn, and winter becomes more beautiful under the condition of open -air light.The leaf wood is not too shade. It is generally suitable for the strong astigmatism in the room, and the time should not exceed 2 to 3 weeks.If long -term lack of light or insufficient light, the leaf color will lack luster, and it is easy to fall into leaves.

3. Watering: The growth period of the leaf wood from May to October should be given enough water to spray water on the leaves and ground every day to maintain high air humidity and Smooth leaves.The amount of watering gradually reduces the amount of watering in the end of autumn and winter, but pay attention to spraying water on the leaves to keep the indoor air humid and proper ventilation.

4. Temperature: The leaf wood is hot and chills. In winter, the indoor safety and wintering temperature are 10-15 C. It is prone to dehydration when it is lower than 10 C, and water stains or discoloration will also appear on the branches.summer can adapt to high temperature above 30 C.

5. Fertilizer: Generally, leaf wood is generally applied to rotten liquid Fertilizer every 2 weeks.Do not have too much nitrogen fertilizer, otherwise the leaves will become green, dim, and not gorgeous.From late autumn to winter, less fertilization or not fertilizing, so as not to draw new shoots.

6. Prevention and treatment of diseases and insects: If the cultivation environment is high temperature and dry, leafwood is prone to harm of script insects, red spiders, aphids, red spiders and aphids can be sprayed with 1,000 times to prevent and control.If you have a smoke disease, scrub with water or spray a multi-bacterial spirit 500-1000 times liquid.

2. precautions for breeding and turning the leaves

1. Properly trim the growth rate of the leaf wood is relatively fast. Usually you need to prunites the leaf wood in time, otherwise it will affect the growth of the plant. Whenever the leaf wood grows strong, the long side branches will be properly trimmed and the yellowing will be yellowed.The cutting of the branches and leaves can reduce the consumption of soil nutrients and promote the growth of leaves.

2. Although the requirements of leafwood in winter are not high, the leaf wood is not cold -resistant, and it cannot grow at a temperature below 5 C.Temperature control is above 5 C, prompting leafwood to thrive.

Third, the method of breeding of leaf wood

Multi -cutting method of breeding and turning the leaf wood.

1. From April to May, the top -growing top -growing tender branches are selected as cuttings, and semi -wood branches with 2 to 3 knots are cut to retain a few leaves on the top.

2. Wash the incision, apply it with plant ash, and dry it with a slightly dry sand and the mixing of the plants and gray.

3. After insertion, use plastic film to keep it moist, put it in a cool place, and control the temperature between 24 C and 30 C. After about 3 weeks, you can take root.

4. After a month, you can move the seedlings. The cuttings of the old branches are not easy to take root.The cultivation management of leaf wood is simple. Except for one trimming and plastic surgery every spring, no other special management is required.The northern pot is out of the room in early May.

1. What is the flashing light?

Blasting Lights, also known as the frequent flashing light, use electronic means (such as programming single -chip microcomputer IC, etc.) to make the light source flickering slowly or quickly to play a warning.The flashing light has been used on the police car before, rarely used in the people. This kind of policeburstThe flashing Lights belong to the controlled items.It is now widely used in entertainment venues, road traffic, advertising brightening, vehicle ships, public security police and other fields.Although the state has no mandatory requirements for the installation of flashing Lights, it cannot be used in the state or city.

2. What are the uses of flashing Lights?

1. Basic role

The role of flashing is to remind and warn. For example, if you have an emergency, you need to attract the attention of others. You can explode, so others will notice you.For a simple example, it is at night when you stop the car on a high -speed car. It is happening at night. You can explode the car after the flash warning. Of course, you cannot shoot the driver's cab.During the fire, he was trapped in the house and flickered to remind people outside to save himself.Flashing can also cause dizziness. There is a certain self -rescue function. There are not many opportunities for daily use. It is useful at critical moments.

2. Modified family

With some low -frequency flashing small power decorationburstFlash lamps appear in the car supplies market, and many lovers who love modification willburstThe flashing Lights are one of the essential weapons for the car -loving modification.

3. Daily necessities

There are many LED pocket -shaped flashlights on the market, which is very suitable for enthusiasts who like wild activities.The shell of metal alloys has the function of strong light, work light, and flashes. LED is energy saving, environmental protection, long life, and convenient to use, and the continuous lighting of this flashlight is very long.It reaches 8 hours, and the work light is 19 hours, and the brightness of the work is also very bright.