one,Electric car canopy product materials

1. Use high -tech composite materials (FRP) to production and production.

2. Use imported stainless steel pipes to production.

3. Use PC endurance board to produce panels and side panels.

4. Use a special electric wiper to automatically scrape the rain.

2. Introduction to electric cars rain canopy materials

1. The characteristics of FRP: light quality, high strength, anti -corrosion, insulation.Its intensity is several times that of ordinary plastic boards,The intensity is greater than steel and aluminum.FRP board has the characteristics of high temperature resistance, aging resistance, friction resistance.

2. Features of stainless steel: good ductility, corrosion resistance, good thermal resistance, high clean and smoothness.Because it is not necessarySurface treatment, so it is simple and simple, and the welding performance is good.

3. Features of PC endurance board: good light transmission, difficulty, weather resistance, temperature resistance, good processing, light weight.

Third, the electric car raindrops are good or the raincoat is good

1. Convenience

First of all, in terms of convenience, the convenience of the puff may be higher. After all, it is sufficient to install it directly. You dont need to wear it frequently like a raincoat.There is no problem of folding and cleaning after arriving at home. Although because of the larger rhizon, it will affect the convenience of some electric vehicles on parking, but it is relatively high.Come to block the sun.

2. Show rain

From the perspective of rain -covering, the two should be similar. Although the area of the rain shed looks large, the actual rain covering effect is not so ideal. When the car is stopped, the car will still be wet by the rain and not wet.There is less, and it is easy to let rainfish in during the driving process, especially under the influence of some winds in winter, the angle of rainwater falling will not be straight up and down.It will also appear on the raincoat. Basically, the rain that can be covered by the canopy can be covered. Rainwear is generally no problem, and the rainfall of the raincoat is not too good!

3. security

As for safety, it is definitely a lot better. At present, many cities are already forced to remove the rails, because the safety of the canopy is not enough.After installing the rain shed, the resistance of the electric vehicle is obviously much larger than the non -installed. This will not only cause a greater burden on the battery of the electric vehicle, but also affect its flexibility in the operation and other operations. In addition,, in addition,, in addition,The canopy also significantly increases the height and width of the electric vehicle, which will affect the pedestrian on the roadside to a certain extent, and increase the chance of the pedestrian of electric vehicles.If you stop on the side of the road, it is easy to be blown down by the wind. If the pedestrian does not pay attention, it will be easily crushed by the car, and the raincoat will not have these concerns at all.

Overall, although the rhizon is more convenient than a raincoat, considering it from safety, Xiaobian suggested that everyone is better to choose Raincoats when choosing electric vehicles.Wear some, and you ca nt put the rain directly in the car, but it is really much better in safety. It is obviously not worth it!

[Family Flower Flower skills] How to raise flowers to raise flowers and cultivation skills and methods

1. How to choose a type of flowering flowers

As the saying goes: "Why do you need to be big? The fragrance is not too much." Put some flower plants in the room, green leaves and flowers, and the four seasons are evergreen. It is really spring and vibrant.Family grows flowers, generally potted plants.Due to the limitations of conditions, do not plant too much, and it is suitable for 10-15 pots.The selected flowers are best to look at leaf flowers, flowers, flowers, fruits and flowers, fragrant flowers, and viewing flowers, so that the varieties are rich and diverse.Family flowers should be small and refined in terms of quantity. In terms of variety selection, flower and trees should be reasonably selected according to the environmental conditions of the family and personal hobbies.

1. Selection of indoor flowers

Indoor is an important place for people in people's lives. flowers should be selected according to the following requirements.

flowers should choose yin or yin -resistant varieties, such as thousands of young, orchids, turtle -back bamboo, banglan, rubber trees, Clivia, etc.Some flower -watching plants are mostly positive flowers. They should be placed in the sun when they are furnished indoors, and often moved outdoors to absorb sunlight and rain.

flowers and trees with odor should not be placed indoors. flowers such as cloves and night incense can cause some patients to have adverse reactions. Some patients with hypertension and heart disease have a feeling of sullenness and discomfort after smelling these fragrances.The aroma of pine and cypress plants can reduce human appetite and should not be placed too much and too long in the room.

The juice of some flowers, stems, and flowers are toxic. Putting in the room should be appropriately isolated, especially to avoid children's contact.Yipin red, five -color plums, peels, tiger thorns, overlord whip, stone garlic, etc. are all toxic, but in fact, the toxicity is small. As long as the leaves, branches, flowers, and fruits are not taken casually, it will generally not cause poisoning.Pay more attention when cultivating.

The layout of the bedroom should be quiet, elegant, and comfortable.The south -wound bedroom has sufficient light, and you can choose the flowers and warm flowers, such as Milan, Fusang, Rose, Bai Orchids, Jin Orange, Fairy Palm and Succulent plants. Due to the short light time in the east -west bedroom, you can choose a semi -yin -resistant flower.For example, camellia, rhododendrons, gardenia flowers, smiling, bamboo, and youth, etc.; The north -facing bedroom has poor lighting conditions and low temperature. It is advisable to choose a Clivia, Diaoli, Astronomical Trees, Turtle bamboo, Tianmen winter and Sharp bonsai.

The living room layout requires peace, elegance, and generous. It should be small and elegant as the main features. You can choose Milan, Siqi Gui, Jasmine, bamboo, Foamians, Jin Orange, etc. Leaf -seeing plants can be placed in the corner of the corner., Brown bamboo, pocket coconut and ferns.

2. Balcony flower selection

The balcony area is small, strong and dry, high temperature in summer, fast water evaporation, but sufficient light, good ventilation, and is very beneficial to some gratifying and drought -resistant flowers.Cutting method of inverted gold bell

The convex balcony is exposed on three sides, and the light is good. You can set up a Flower stand and plant climbing flowers, such as lills, glory, grapes, five -leaf ground brocade, etc. flowers can be set on rose, pomegranate, Milan, jasmine and bonsai.On the top of the balcony, you can hang shade -resistant Hanging orchids and fern plants. The back of the balcony is a semi -yin environment, which can be placed in Nan Tianzhu and Clivia.

The concave balcony is only exposed on one side, and the ventilation conditions are poor. You can set up trapezoidal flowers on both sides of the wall and furnish flowers and trees.

How to choose the cultivation soil

Potted flowers, because its root system can only move within a small soil, so the requirements for soil are stricter than open field flowers.On the one hand, the nutrients are required to be as comprehensive as possible, and the nutrients needed for flower fertility in the limited pot soil; on the other hand, it requires good physical and chemical traits, that is, the structure must be loose, the water holding ability must be strong, the acid and alkali should be appropriate, the Fertilizer must be better,EssenceHow to trim

Because of this, when breeding flowers, you should try to choose a good group structure, loose and fertile, good water reservation and drainage performance, and at the same time, it is rich in neutral or slightly acidic soil with rich humus.This kind of soil is light weight, large pores, air circulation, and rich nutrition, which is conducive to the development of flower root system and strong growth of plants.If the flowers are planted in a viscous soil with poor permeability, or in pure sand soil with lack of nutrition, water preservation and Fertilizer, or in alkaline soilGrowth and even death.

However, the soil conditions mentioned above are not available for any natural soil.Therefore, the soil for Potted flowers needs to be used for artificially prepared the cultivation soil.This cultivation soil is based on different growth habits of flower plants, and more than two soils or other matrix materials are mixed according to one ratio to meet the needs of different flower fertility.

There are many materials suitable for preparing the cultivation soil, and the following are commonly used.

1. Sandy sand.Take it more from the river beach.The drainage performance is good, but it has no fertility. It is mostly used to mix other culture materials to facilitate drainage.

2. Garden soil.Take the soil on the surface of the vegetable garden, orchard.It contains a certain humus and has good physical properties, which is often used as the basic material of the majority of cultivation soil.

3. Rotten leaf soil.It is composed of fallen leaves, grass, etc.High humus content, strong water retention, and good transparency are one of the main materials for preparing culture soil.

4, mountain mud.Divided into two types: Black Mountain Mud and Huangshan Mud.It is formed by the deciduous leaves in the mountains for a long time.Black Mountain mud is acidic, contains more humus; Huangshan Mud is also acidic, with less humus.

5, peat soil.It is made of peat moss.Due to the different stage of formation, it is divided into two types: brown and black peat.Bellyizes are rich in organic matter and are acidic reactions. Black peat contains more minerals, with less organic matter, and is slightly acidic or neutral.

6. Cycles of bran ash.It is a gray after burning in the rice shell. It is slightly alkaline and contains potassium.

7. Fat soil.It is made from the accumulation of garden soil, sewage and other items from animal manure, fallen leaves, etc., and has rich fertility.

In addition, there are ponds, river mud, coniferous soil, gorbi, rot wood chips, vermiculite, perlite, etc., which are good materials for the cultivation soil.

The formulation of cultivation soil should be flexibly grasped according to the nature of flower growth and the nature of cultivation soil materials and local conditions.General Potted flowers, commonly used cultivation soil configuration ratio is corrupt leaf soil (or peat soil): garden soil: river sand: Bone powder = 35: 30: 5: or rotten leaf soil (or peat soil), plain sand soil, rotten rotten, rotten rottenOrganic Fertilizer, calcium transmodent, etc. Press 5: 3.5: 1: 1: 0.5 Mixed sieve.

The above cultivation soil is mostly neutral or sore, suitable for most flowers.It can be used to cultivate like acidic flowers such as tea and cuckoo, which can be mixed with about 0.2 % of sulfur powder; cultivating flowers such as caught balls can be added to about 10 % of the wall Skin soil peeled off.There are different sayings of some flowers and trees, and the above data is for reference only.

3. How to judge whether Potted flowers are short of water

Watering is a regular management of flowering flowers. Whether the potting soil is short of water is difficult to master, so many flower buddies often feel distressed.Introduction to the experience of farming experts is as follows.

1. Tap method

Gently tap the finger joints gently tap the pelvic wall on the middle of the flower basin. If a relatively crisp sound is made, it means that the pot soil is dry and you need to water immediately; if the dull dullness is emitted, it means that the pot soil is humid and it can be watered for the time being.Essence

2. Visual inspection

Use your eyes to observe whether the color of the pot soil changes. If the color becomes lighter or gray -white, it means that the pot soil is dry and you need to water; if the color becomes darker or brownwater.

3. Pointing and testing

Put your fingers gently into the pot soil about 2 cm and touch the soil. When you feel dry or rough and hard, it means that the pot soil is dry and you need to water immediately.Do not water.

4, pinching method

Twist the pot soil with your fingers, such as soil powder, indicates that the pot soil is dry and water should be watered immediately.

The above test methods are all experiences. It can only tell people the approximate situation of the wet and dry pot soil. If you need to know the extent of the dry and wetness of the pot soil, you can buy a soil thermometer and insert the thermometer into the seal to see the scale to see the scale."Dry or humidity and other words appear on the top to know when to water exactly.

Fourth, watering technique

Generally speaking, it is best to put the water water water in a container such as no built -in bucket pots for two to three days, so that the water and the air are fully exposed. When the water temperature is similar, the chlorine gas in the water is almost volatile.Watering is performed at this time to avoid affecting the growth of flowers.

The principle of watering is that it does not dry or poured, and it is poured through, but do not pour too much. It should be diligent and less, preventing the potting soil from being wet and causing the root of the pot to the root system for long -term hypoxia and rotten roots.In addition, do not water or water on rainy days to prevent water from accumulating water.

Other water pouring flowers:

1. Put the flowers: The residual tea is used to pour the flowers, which can keep the soil moisture, but also add nitrogen such as nitrogen.However, the humidity of the flower basin should be poured in a regular basis without pouring it with the dumping tea.

2. Severer milk pouring flowers: After the milk is deteriorated, add water to pour flowers, which is beneficial to the growth of flowers.But more water is used to make it easier to dilute.Unblocked milk should not be poured flowers, because it generates a lot of calories during fermentation, it will "burn" the root (rotten roots).

3. Cold water to pour flowers: Watering flowers with cold water can make flowers and trees and flowers gorgeous, and promote it early.If it is used to pour the bamboo, it can make its branches and leaves develop horizontally, and the dwarf is dense.

4. Pour flowers in warm water: cold water is cold in winter, it is advisable to pour flowers with warm water.It is best to place the water in the room, and then pour it when it is similar to the temperature of the room.It is better if the water temperature can be poured when the water temperature is 35 C.

5. Tao rice water pour flowers: Frequent rice water, tea, osmanthus and other flowers with rice water can make their branches lush and bright.(It is recommended to collect rice water for rotting and fermenting, and then use it after dilution.)

Five, fertilization skills

1. Sprinkle a layer of Wheat rice granules in the Flower pot, which can promote the growth of flowers and extend the flowering period.

2. Burning eggshell Fertilizer is crushed into the Flower pot. It is a good Fertilizer, which can make the pots grow lush and the leaves are gorgeous.

3. Cooked a small amount of soybeans to be used.Wear three points for each pot of flowers and put 3-5 cooked soybeans, depth and 2-3 cm, without hurting the root of the flower, and covering the soil as usual.

6. Disease prevention and control

In the early spring, various flowers will enter the strong growth season. At this time, it can be sprayed 1-3 Bordeaux liquids 1-3 times on the leaf surface and leaf back to prevent diseases.The method of allocating 1 % liquid liquid is: 1 gram of copper sulfate, 50 ml of heating water after crushing; then use 1 gram of lime, use a few drops of water to make the powder, then add 50 ml of water, filter the residue; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two these two; take these two.The species solution is poured into the same container at the same time, and finally the blue transparent Bordeaux liquid is finally made.

Seven, insecticidal sterilization

1. Laundry powder: Solk a tablespoon of laundry powder in 4 liters of water, spraying flowers and leaves every two weeks, which can completely eliminate white flies and bacteria.

2. Milk: Mix 4 cups of Flour and half a cup of milk into 20 liters of water and stir, filter it with gauze and spray them on the flower leaves to kill the ticks and their eggs.

3. Beer: Pour the beer into the shallow pot under the Flower pot soil, and the snail will be drowned.When an ant appears in the flowerpot, soak the cigarette butt and tobacco with hot water for a day or two. When the water becomes dark brown, sprinkle some water on the stems, flowers and leaves.It can be eliminated.

Eight, cuttings and freshness

1. Rose flower uses fire moxibustion at its cut, and then inserts into the bottle.

2. Chrysanthemums are applied to a little mint crystal at its cut.

3. White orchids are wrapped in wet cloth at night, and it is unveiled during the day, which can delay the withering time of the flowers for 2-3 days.

4. Peony blossoms are dipped in the incision with hot water, and then inserted into cold water.

5. Camellia is inserted into fresh salt water.

Nine,The effect of light on flowers

Light is the energy of flower plant manufacturing nutrients. Without the existence of light, the photosynthesis cannot be performed, and the growth and development of flowers will be seriously affected.Most plants can only be leafy under sufficient light conditions.Different types of flowers have different requirements for light.Flower proverb: "Yin Camellia, Yang Peony, Banyin and Big and Bigria Four Seasons".According to the requirements of different flowers on the strength of light, flowers can be generally divided into positive flowers, neutral flowers and negative flowers.

1. Positive flowers

Most of the flowers and fruits and flowers are positive flowers, such as magnolia, rose, pomegranate, plum blossoms, Ziwei, citrus, etc.There are also a few positive flowers in leaf -viewing flowers, such as Su Tie, Palm, and Leaf Wood.Most aquatic flowers, cactus and Succulent plants are also positive flowers.All positive flowers like strong light, not resistant to shade.If the sun is insufficient, it is easy to cause the branches and leaves, the tissue is soft and weak, the leaf color becomes yellow, it is not easy to bloom or bloom well, and it is susceptible to pests and insect pests.

2. negative flower

It grows well under the environmental conditions of the shadow, such as bamboo, camellia, rhododendron, jade, green dill, eblotic, ivy, big rock tung, turtle back bamboo, begonia, etc.Growth stagnation, severe or even death.

3. Neutral flowers

It grows well under the condition of sufficient sunlight, but in the summer light, there is no principle without the principle, such as osmanthus, jasmine, white orchid, and eight immortals.In summary, various flowers have different light and requirements, and even the same flower, the requirements for light at different stages of growth and development are different.Flower buds are formed under the condition of short -sunlight.

Ten, how to save the flowers after withering

Potted flowers, because the water storage in the pot is small, forgot to water, especially in the summer leakage, often causes the leaves to wither. If it is not saved in time, the plant often causes the plant to wither.If you save the law, it will sometimes cause plant death.

The correct way is: When the leaves are found, the Flower pot should be moved to the shade of the shade immediately, spray some water into the leaf surface, and pour a small amount of water.In the future, as the stems and leaves gradually resume upright, the amount of watering gradually increases.At this time, if the water is poured too much at this time, it may lead to plant death.

This is because a large number of root hair was damaged after the flowers were withered, so the water absorption ability was greatly reduced. Only after the new root hair was born can we restore the original water absorption ability.At the same time, the wilting of the cells causes the cells to lose water. After the water encounters water, the cell wall absorbs water and expands quickly. After the primary quality, water absorbs water, and the expansion speed is slow. If a large amount of water is poured suddenly at this time, it will cause the wall to separate the wall and damage the primary quality.Causes flowers to die.

Recommended reading

[Method of Family Flower] The most practical family flower breeding skills of novice flowering flowers and getting started

[Novice Getting started] What are the new hands suitable

[Family Flower seeds] Frequent flower seeds planting methods how to germinate flowers

[Family Flower Basin] What kind of choice and techniques of Flower pots are good for Flower pots

[Family Flower Flower Soil] What kind of soil is suitable for farming family flowers and soil.

[Family Flower Flower Fat] How does family flowers make flowers and fat Family Flower Flower Flower Fed

[Family flowers and watering] How long does it take for flowers to grow flowers and flowers?

[Family Flower flowers and Worms] How to remove flowers in the Flower pot in the family with flowers in the family

[Family flowers do not bloom] What is going on without flowering flowers?What should I do if common potted plants do not bloom

[Four Seasons Nourishing flowers] What are the precautions for family breeding of flowers in the four seasons of the family?

[Family Flower Flower tools] What are the essential small tools for flowers in common flower farming tools

1. How about polarizing driving mirror

Because the Polarized mirror uses the principle of shifts of light, in addition to blocking ultraviolet rays, it can also effectively alleviate sunlightEliminate the pavement reflection, the glare produced.It is very helpful for friends who drive.

However, polarizing Sunglasses are ineffective for high beam, which is a direct light, and the polarizer can only be filtered.30Polarized light around the degree.However, at night it can filter the reflection on the road to reduce interference.

The most important point is that the polarizer worn at night must buy colorless or light yellow. Do not take the dark polarizer wearing during the day. The light at night is dark.Essence

2. How to buy polarized driving mirror

1As well aslens material

The material of the lens affects the effect of protecting the eyes. You should choose the driving mirror made of polarized lenses. This can effectively reduce the dazzling Lights and the light of the Lights.The strong light becomes soft, and the vision is clearer, which also guarantees the safety of the driver's friends and relieves the fatigue of the eyes.If possible, let the salesperson darkens the light when buying, and feel the softness and clarity of the Lights after wearing the product.

2As well asThe arc of glasses

The comfort of polarizing driver mirrors depends on the arc of glasses.Westerners' nose bridges are generally tall, and the contours of the bridge of our Orientals are round. Therefore, when choosing, you can try it. After wearing it, you can feel that it is easy to drop and hold the nose. It is most important to choose the glasses suitable for us.

3As well asThe nose of the glasses

When the driver friends buy the night vision mirror, they should choose the kind of soft and elastic nose. In this way, it will not make the nose of our major drivers feel uncomfortable.

4. Observe the mirror leg

The flexibility of the driver's mirror legs is also very important. Check out whether the mirror legs are flexible and whether the size can be adjusted to meet the needs of different drivers and friends. Flexible mirror legs will be easier to adjust and make drivers feel more comfortable.

5. Framework material

You should choose a driving mirror of the alloy material. The glasses made of this material are very light, the weight is not heavy, and it is strong. The ears will not be uncomfortable because of wearing glasses for a long time.

6.Thickness of the lens

The thickness of the driver's lens lens affects the use of glasses to a certain extent. Choosing glasses with thicker lenses can be more durable to prevent the glasses from being stimulated and unexpectedly crushed, effectively protecting the eyes of drivers and friends.

Summary: Good polarized driving glasses should be solved"Just block the light and not stop the road"The difficulty of the problem perfectly combines the advantages of anti -light, night vision and Sunglasses.The most representative of these is San Marco driving the mirror, because the high -tech drilling high -perspective reflection film technology is used, with six major functions of rainproof fog, anti -dazzling, night line, anti -mirror water mist, anti -impact, and intelligent color change.EssenceBy light and not fragile in weightPCMore than ten layers of protective films on the lens, absorb 100 % of ultraviolet rays, and the blocking rate of strong light reaches4Be more than20More, the light transmittance of the pavement is greater than70%In Yin, rain, and fog days, the brightness of the pavement scenery can be significantly increased. In the snowy days, it can also prevent dazzling, anti -snow -proof and increase the sense of layering of the pavement;andPCThe lens also has the advantages of not broken the ground, not hurting the eyes in the event of an accident, the weight is lighter than glass, and it is not easy to get fatigue for a long time.

The breeding method and precautions of rich coconuts

1. Soil

Four wealthy coconuts should choose loose and fertile, fertile, drainable, and breathable sandy soil. Choose a larger Flower pot, because the roots of the plants are relatively developed.A small amount of nutrient solution is applied to the soil, which can promote the growth and development of plants, and the plant growth is stronger.

2. Temperature

Rich coconuts like to grow in a warm environment, moist, and grow strong in the semi -shade environment.The best growth is between 15 and 25 C, and the maximum cannot exceed 32 C, otherwise the leaves will wither.In winter, we must pay attention to the temperature in the room must be above zero degrees, otherwise the rich coconut will be frostbite or even frozen to death.

3. Watering

To ensure sufficient water supply during the strong growth season of wealthy coconuts, it should be watered once in about 1-3 days to see the pot soil. If the pot soil is too dry, it should be watered immediately.Wet, you can wait for watering. Too much watering can easily cause water to fail to evaporate normally and cause the plant rotten roots.

4. Light

The growth of rich coconuts requires appropriate light, which can promote its leaves more shiny and weaker. The leaves in the shelter environment for a long time are easy to yellow, and the branches are easy to soften.Choose a Shading net or move it to the midnight environment for maintenance.

5. Fertilization

Fugui coconuts have less demand for Fertilizer. You only need to apply liquid Fertilizer 1 to 2 times a month during the growth period. In the end of autumn and winter, you should apply less Fertilizer or not fertilize.The thick Fertilizer should be performed in a small amount of many times, otherwise the branches and leaves of the rich coconut will be burned.

6. Pruning

The growth of rich coconuts is very strong, so in order to allow the wealthy coconut to get more nutrition every branch and leaves, when weeding during the growth period, all the dead branches and sick branches on the branches are cut off.Tool, cut the cuttings for cuttings.

7. Pests and insect pests

Garcus pests are natural enemies of rich coconuts. The diseased spots of rich coconut leaves not only affect the beauty, but also easily cause the wealthy coconut to wither. ThereforeSpray.

8. Change pot

The adaptability of a wealthy coconut is average. It is easy to affect the growth of the root system for a long time without changing pots. It is best to change the pots every two years. When changing the pot, you need to trim the roots.It should be kept slightly dry.

childraincoatMarket chaos

Frog Raincoats, rabbit Raincoats, rice mouse Raincoats, sponge baby Raincoats ... Most of the children's Raincoats sold in the market are bright and full of patterns, and a risk monitoring report shows that at least 50 % of children's Raincoats are adjacent.The content of phenyl acid ester exceeds the standard, and long -term contact may affect the child's reproductive system.People in the industry suggest that it is best to buy pure plastic for children without printing any patterns.

1. The color is bright and cheap

In a kindergarten, if you catch up with the rain when you leave the Park, you will "jump" from the kindergarten one by one to various "small animals" -have frogs, rabbits, tigers, etc.raincoat.This kind of raincoat is full of patterns of small animals, such as frog Raincoats, that is, there are long heads, back, and sewing on the back, and even the buttons.The parents of the children said that these Raincoats are basically purchased from the nearby market, and the price is not expensive, basically one dollar of 20 or 30 yuan.

Children's Raincoats sold in the market are basically colorful patterns.A salesperson said that such Raincoats are full of cartoon images. It is best to sell. Parents and children like them. They can wholesale thousands of pieces every day.Although children's Raincoats are all promoting thickening, insulation, breathable, etc., they are all containing coating materials. It is difficult to find pure plastic products.

2. Excessive content of toxic substances

The reporter searched on the Internet and found that children's Raincoats with a price of less than 15 yuan are all disposable. This raincoat is mostly VPC material, pure color, without patterns.In the monitoring of a quality and safety risk monitoring organized by relevant departments, such Raincoats are not much problems.

Through monitoring of 30 batches of samples, the content of demental amphenolate in 15 batches of children's raincoat exceeds the reference value range, with a proportion of 50%.Industry insiders explained that phthalate is a type of plasticizer. If a child is worn naked for a long time or puts accessories into his mouth, long -term large doses of contact will lead to the dissolving volume of diopenate.Exceeding the level of safety, it will endanger children's liver and kidneys, and may also damage the development of reproductive systems and cause precocious puberty.In addition, the lead and cadmium content of some children's Raincoats are beyond the reference value range.As children are in the growth stage of growth, their body resistance is lower than adults, and they are vulnerable to the influence and violation of various types of harmful substances.

How to choose children's raincoat

1,raincoat material

General children's raincoat materials are PVC. The editor thinks that this is enough, because the children's Raincoats are only temporarily worn. As long as they love it, the Raincoats of this material will generally not break.If you want to buy some, then buy PVC Gamon, which is more strong.For those plastic cloth Raincoats, you can't wear it only a few times, and you should not buy it for your children.

2. Rainwear size

The size of the raincoat should be selected well. When buying, Xiaobian finds that the raincoat suitable for the age group is actually smaller. For example, the S number is suitable for children aged 3--5 years old, but sometimes it is thick or bigger.The clothes and the schoolbag should be carried, so that the raincoat of the size is small. You should buy the largest one and you can wear it for a few years.The larger raincoat can also cover the child's legs. It is more appropriate to buy raind pants alone. Of course, you can't buy too much.

3. Smell the taste of the raincoat

Some inferior Raincoats, before putting it beside the nose, emit some pungent taste, such Raincoats cannot be bought for children.They are made of inferior plastic, so they still choose more and find those who have less tastes and safer.Of course, plastic products will inevitably taste. After buying, it will be more ventilated for a while.

4. Select less coating printing raincoat

Parents should try to avoid choosing raincoat containing large -area coatings and patterns.Because these Raincoats such as coating, printing, and film, are likely to contain toxic and harmful chemicals such as phthalate, lead, cadmium, and chlorohylene monomer.Among the various colors such as fluorescent green, princess powder, marine blue, lemon yellow, etc., you should also choose plain and not bright. It is best to not add the solid color of the paint.

5. The contents of children's Raincoats need to be complete

Consumers should pay attention to whether the contents of children's Raincoats are complete. Specific information including model specifications, materials, factory names, product names, product standard numbers and other information. Try not to buy products without logo or incomplete identification information to protect themselves in response to themselves.Some rights.

6. Buy a raincoat with a schoolbag space in the back

Children generally need to memorize schoolbags, like children in kindergarten like to memorize schoolbags, whether useful and useless.Therefore, when buying a children's raincoat, you should buy more space to place a schoolbag.So don't be afraid to wet the child's schoolbag.In addition, to see if there are pockets, it is more practical to have pockets, and children will like it even more.

7. Pay attention to see if there is a damaged place for the raincoat

When buying a raincoat, you should shake the raincoat to see if there is a damaged place. If you have a crack, do not buy it. Some of the sutures are crooked.In addition, we must focus on whether the sewing is dense and carefully observe whether there is a line.In addition, do not let your child's Skin contact the raincoat directly. Wear a dress first.

8. It is best to let your child try on

In order to make the raincoat more fit, parents should take their children to try on it, and buy a little bigger.It doesn't matter if the sleeves are longer, just pull up a piece of Sleeve.The lower body is a little bit covering the legs, but there are some raincoat design problems. If the shoulders are too wide, the child will be very loose and uncomfortable, so it is best to try it on.

9. Try to choose the brand as much as possible. It is better to buy in large supermarkets or malls

When buying a children's raincoat, you still choose a brand. The quality is relatively good, and the price is actually not much different.And if you have any problems, you can exchange it at any time. If you buy it on the stall, it is difficult to return and exchange.Many people like to shop online. Although they are cheap and convenient, the quality is uneven. It is still many disadvantages that they cannot touch it in person.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;