Pearl Orange,Red fruit thin columns, do not say, the genus of Qiancao family; place of originDistributed in South America, central Taiwan and south, the Philippines, Australia, etc.

Morphology

Pearl orange plants will be said to be Succulent plants by flower buddies. In fact, it is not. Pearl orange and quiltsceae is a herbaceous plant. The scientific name is red fruit thin column grass.Or ovate triangle, about 6 mm long, flowers without stems, top -born, single, small.Nuclear fruit spherical, red when mature, with 2 small cores inside.

Growth environment

Pearl orange is bright and bright, not drought to resist.The soil of cultivation of pearl orange should be loose and breathable.It is placed in a bright half -shaded place (the winds in the south direction are ideal), but the sun should be avoided.Potted pearl orange in summer can be placed outdoors, but it also needs to avoid direct sunlight.The temperature should not be too high.The environmental temperature of winter should not be lower than 8 degrees Celsius.Like cold and cold climate, the farming experience of the garden is the most ideal of 18-24 degrees.Watering should be watered after the surface soil is dry.If the light is insufficient, the stems and leaves are easy to cover the fruit.From the end of spring to the cooked time, it is best to put it in a place where the sun is sufficient and can block the wind and rain.

Distribution

Central and southern Taiwan, the Philippines, Australia, etc.

Cultivation technology

1. Soil selection

Pearl oranges like the soil are moist and avoid waterlogging. The soil ratio is imported by imported peat: perlite: vermiculite = 1: 1: 1 or rot leaf soil: charcoal powder: perlite: clean river sand: rural soil = 1: 0.3: 0.5: 0.5: 1 or rot leaf soil: Pastoral soil: clean river sand = 1: 1: 1 can be paved around to ensure the humidity of air humidity in the small environment. When planting, a small amount of volcanic stones are paved at the bottom to prevent the bottom of the water from the bottom of the water and breathability.insufficient.

2,LightPhoto and temperature

The growth of pearl orange requires a certain degree of light to resist semi -yin, but to avoid strong sunlight directly illuminated.During the breeding process, the plants of pearl orange should be placed under the bright scattered light, especially in summer, to shade, but it cannot be too shade, which will affect flowering and results.

The cold resistance capacity of pearl orange is strong. The suitable temperature for growth is between 10 C and 20 C. It can resist low temperature below -10 C in winter, but the temperature of wintering should be kept above 5 C.

3. Watering and fertilization

Pearl Orange likes a slightly humid growth environment. In summer, the pot soil needs to be kept moist, and it needs to be slightly dry in winter.Watering should be appropriate and ensure that watering should not be poured to the leaves or fruits, so as not to rot the plant.You can use the potting method or spray method.Fertilization should also be moderate, and Fertilizer is required every 1-2 weeks.

4,Breeding method

Division:Take the autumn division as the best period, take out the whole plant, divide it according to the shape of your own needs, gradually separate the root, re -plant it, and pay attention to moisturizing after planting. Due to the damage of the root, use aspirin when planting.The solution (aspirin enteric tablet with a piece of water 500ml): Glucose water (0.1%glucose water) = 1: 1 mix and mix it for mixing soil, mix until the soil is moist and not wet.There is no need to water for 1 to 2 weeks. Spray water once a day once a day. The weak light is maintained for 5 to 7 days, and then gradually replenished the light.

sowing:Pearl oranges can be sowed and reproduced. It is carried out from February to March and can also be divided into division and in August.Take the seeds with cooked fruit, remove the peel, dry it slightly, and then use an appropriate amount of root powder to soak the seedlings, cover it lightly on the surface of the soil, cover the peat 1 mm or laid a thin layer of fresh water moss., Then keep the temperature from 10-15 C for moisturizing and cultivation, and buds can grow in 2 to 3 weeks.

Group training:In recent years, a new method of breeding is selected. It can be cultivated with chemical agents such as medium and agonists. It can be used in large quantities for production. The product shape is relatively uniform, neat, and large breeding.

Bloom

When the pearl orange is blooming, it needs to be artificially pollinated so that the results of pearl orange can be more.

Pest

Sometimes pearl orange is infected with gray mold, and you need to pay attention to controlling the humidity of the growth environment.

precautions for pearl orange breeding

1. Avoid strong light exposure

The growth of pearl orange requires a certain amount of light to resist half yin, but to avoid strong sunlight directly illuminated.During the breeding process, the plants of pearl orange should be placed under the bright scattered light, especially in summer, to shade, but it cannot be too shade, which will affect flowering and results.

2. Pay attention to keep the pot soil properly humid and water with the "Basin Dafa".

Watering the basin method to avoid water falling on the leaves, causing plant rot.Once every 5-8 days, according to the location of the placement, the choice is to see the fruit and the edge leaves when there are wilting, but do not accumulate water.In the case of drying high temperature, you can use the spray of a watering pot to increase the humidity.The pot soil in summer is moist, and it is slightly dry in winter.After the fruit is generated, it is necessary to ensure that there is no water on the plant, otherwise the fruit is prone to rot.

3,Keep light and moderate ventilation

Pearl Orange likes a cold and humid environment, is not drought and high temperature, and avoids strong light exposure.I like bright scattered light, such as insufficient light, leaf and leaves, and loses the value of ornamental.The most suitable growth temperature is 10 ~ 18 C, and the low temperature below -10 C can be resistant in winter, but the temperature of the winter should be kept above 5 C.Pay attention to maintaining long -term ventilation and placed in a place that can block the wind and rain, otherwise it is difficult to appreciate its glamorous fruits.

What should I do if I can't suck the suction shelf

1. Dip water

The main reason that causes the suction shelf is often on the plane. When there is dust on the wall or mirror surface, it will cause air leakage to the inside of the suction cup.Impurities exist.At this time, you can dip it in water, or use hot water to soften the suction cup and stick it. Remember to slowly press out from the middle to the surroundings to drive out the air, but be careful not to blame the suction cup and deform.

2. Put the egg white

Separate the egg white in the egg from the egg yolk and apply the egg white to the inside of the suction cup with a cotton swab. Remember to be uniform, and only a thin layer is enough.After going up, the egg white is completely killed. It takes almost 12 hours to work. At this time, the suction cup is firmly fixed on the wall, and it will not fall off anymore.The principle is that the egg white contains glue, which can help the suction cups better adhesive and the contact surface, and the glue fills the gap and squeeze the air, so the suction cup will firmly suck on the wall.

3.

Use toothpaste to replace the egg white can also have the same effect. Squeeze out an appropriate amount of toothpaste and apply it on the back of the suction cup, and then stick to the corresponding position. When the toothpaste is almost combined with the hookThe effect of water and soapy water is much better.

4. Wipe it with alcohol

A large part of the suction cup folded is that the position of the paste is not handled clean. Wipe it with alcohol and remove the dust, so that the paste will be firm.

How to install the suction shelf

1. It is best to install the wall with a Smooth plane;

2. Dry the wall with a dry cloth;

3. Press the suction cup to the wall from the middle to the surroundings;

4. Then wait for a while before use.

How to remove the suction shelf

1. If the glue is hard (such as AB glue), it can be heated with a hair dryer with a hot air. After softening, use the knife to remove it.

2. If the glue is soft, cut it directly with the artist knife.

3. If the glue is relatively thin and there is no thickness, you can use the fish wire to be removed. Use a wet rag (rough) to add a cleaning agent a few more times.

What does the yoga pad?

Even if you are a yoga beginner, it is best not to use EVA's low -end Yoga mats.If you just want to practice yoga steadily, then buy PVC foaming materials, good elasticity, non -slip, and moderate price. If you have yoga Bags, it is also convenient to carry.Even if it takes a long time, it is not a pity to step on those fluffy small protrusions. It is just convenient and affordable.

Low -end EVA material

EVA is a hard foam. Most of them are used in the sole, and the smell is heavier. For example, the kind of thick -bottomed loose cake shoes use that material.The current yoga brick also belongs to this material, but it is not very good for Yoga mats. Its poor elasticity and poor anti -slip effect, but because of its low price, even 10 yuan, 20 yuan can be bought, soThere is no sales in the market.Therefore, buyers need to carefully distinguish the materials when buying to avoid purchasing unsafe Yoga mats.

Middle PVC foam material

PVC foaming yoga cushion is currently the most common yoga pad material.The chemical name of the PVC is a Pigvosate B, which is commonly used in the manufacturing of daily necessities such as luggage and wires.The material of PVC does not have a special chemical smell, even if there is a smell similar to rubber.The material of the PVC foam itself is harmless to the human body. What is harmful is the material manufactured with secondary material (recycling material).The yoga cushion made of PVC foam is very flexible and non -slip. It is very popular on the ground and the price is moderate, so it is very sold in the market.80%of the Yoga mats are now made of PVC foam.The yoga cushion made of PVC foam ranging from 40 yuan-90 yuan in the market, which is more medium.

Now many friends may also see PVC foaming Yoga mats of 10 or 20 yuan, and there will be only three cases that will appear: in three cases:

(1) Use PVC's secondary material for foaming and re -manufacturing, and its cost is reduced.

(2) Renewal reduction or mixing with other added materials to reduce the amount of PVC material, thereby reducing costs.This kind of cushion is often different and conventional. If you add more foaming, it will taste heavy, and the cushion is too light, and it will affect the use. Yoga mats should be suitable for carried.Essence

(3) Indoor anti -sliding pads or low -grade wild camp pads made of PVC foam impersonate yoga pads. This kind of cushion is often not uniform in specifications.Of course, the low -cost PVC foaming yoga mat is not necessarily the secondary product. It may be that the purchase channels of the merchant are different.The market has increased sales and sale activities.Therefore, friends who choose the PVC foaming cushion should prevent the three situations of the three situations above!IntersectionIntersection

High -end TPE material

TPE material is an environmentally friendly material that can be recycled, can be recycled, reappeared, and reduce pollution.TPE's Yoga mats are mainly elastic, good non -slip effect, good toughness, and strong tension.

However, its materials are high, mainly used in high consumer groups in the European and American markets or Chinese markets.The price is at least 100 yuan, generally between 100 yuan and 300 yuan, which can better exceed 300 yuan.If you have financial resources to buy, of course, it is also a good choice.

precautions for yoga Cushion Buying

What issues should be considered when buying Yoga mats What's more? The gym coach said: The material is the most concerned when buying a yoga mat, and it is also the key to determining the price of the mat. Do not be fascinated by the good -looking color and ignore the quality.

The questions that friends should pay attention to when buying yoga cushions are the following points:

1 Whether it is easy to clean.

2 When paving on the ground, whether it is easy to pave and not wrinkle.

3 Whether it is sticky.

4 Will it slip after sweating?

5 Whether it is easy to carry.

6 Is there any label " Duration " Essence

7 Whether the material is environmentally friendly and whether the environment and the body are harmful.

Reminder: If the mat is very dirty, use washing powder water to clean it.Washing powder should be as little as possible, because any residue will make the Yoga mats slip in the future.Gently scrub the cushion with a cloth dipped in water, then rinse it with water. Finally, roll the yoga mat with a dry towel, suck excess water and dry it.

The above is the problem that you need to consider when buying Yoga mats. In addition, the simple cleaning of Yoga mats can be added with two glasses of water. 4 Put the detergent for dripping the dishment into the sprayer, spray the yoga mat, and then dry it with a dry cloth.

1. Western hat

Cowboy hat from the American denim is called a kind of commonly wore Mexican denim."Stonson" -style wide -edge high -top felt hat.The top of this hat is depressed down, while the two hat along the two sides rolled up slightly.In addition to the people who wear it, it looks chic and capable, and the denim hat also has many practical functions. It can not only cover the wind, frost, rain and snow, but also the ready -made water scoop, rice bowl, and pillow.The evolution and diversity of cattle hats can be seen in Western movies.The western cattle hat is full of western style, of course, it is also very individual. It creates a male different style, and it is very useful to use it to cover the fierce sunlight in summer.

2. Wide -edge straw hat

The brim of this straw hat hat is wide and large, and there are rural areas.Straw hat is good for ventilation, and it can avoid direct sunlight.

3. mask -shaped sun hat

There are large black hats that can cover the entire face like a welder. In addition to blocking the sun, you can also prevent sand and insects.

4, Baseball cap

The logo of Baseball players is born for exercise.Therefore, it is most suitable for tourism, leisure, and exercise. The long arc with a arc can cover the sun. The adjustable loose band or magic sticker is suitable for different head circumference.Most of the mesh design is used in the second half, which is better permeability.

5.Multi -function hat

Added annexes such as sunshade skirts, hats and ropes, etc. The sunshade skirt can be fixed on the hat tongue to provide a complete Shading effect on the face and neck.It is restored to a ordinary Baseball cap.This hat is available in Outdoor goods stores. Most of them are made of synthetic fibers such as nylon. They are light, durable, fast, and not easy to deform, and they are both beautiful and functional.Suitable for long -term outdoor sports, such as Hiking, climbing, fishing, etc.

1. What types of tennis shoes

There are three types of tennis shoes today: hard ground shoes, clay shoes and grass shoes. Let me introduce it to you:

1. Grass shoes are full of protruding small dots

The strange venue of grassland as tennis enthusiasts has always been viewed, so sneakers on the grass field are also rare.In fact, the grass is the wet and slippery venue (none of them).When the players are Running on the grass on the grass, the grass will be broken quickly.The juice of the grass is mixed with fiber and soil to fill the soles quickly without falling off.Over time, players will become skaters on the grass.After studying for a long time, the designer found that this densely protruding small dot can avoid grass and mud attached to the soles of the shoe.At the same time, the dense origin can also be relatively improved and preventing the slide, which is a bit similar to the protruding cylindrical nail shoes on the football field.

2. ceramics shoes have a deeper and wider texture groove and protruding polygon small block

As a relatively slippery pottery venue (sand land, red earth field), the shallow soles of the hard floor shoes will be quickly filled by sand soil to lose grip.Therefore, clay shoes deepen and widen the texture of the soles, which makes the soles difficult to be filled by pottery.At the same time, with the Running lines, the pottery will be slowly opened.Those protruding blocks or polygonal pieces also play a role in small scrapers.While increasing friction, it is easier to fall.

3. Hard shoes have tight human characters or inverted gradient patterns

The hard ground court is the most common type of venue, and it also makes hard floor shoes the most common type of tennis shoes.Its pattern design is mainly tightly tightly human characters or inverted trapezoidal grooves.This is similar to the soles of the shoe of daily sneakers. The main role is to enhance the grip effect on the venue and make every step of you solid.

In addition, the soles of red soil and hard shoes are very similar. Here I teach you two skills to distinguish:

1. Hard shoe shoe hill -shaped or V -shaped lines are not the whole side. The red soil soles are the entire V -pattern road on the whole side (the red soil soles look neat, and the hard ground soles look messy).

2. The soil of the red soil shoe is raised and soft, and the hard sole is harder.Because the soles of red soil shoes are soft, they are not wear -resistant.

2. How to buy tennis shoes

When choosing tennis shoes, you can consider from the following aspects:

1. The style of playing

(1) Bottom player

The bottom line players mainly hit the backcourt of the stadium. The types of sneakers they need are more horizontal support.Because the soles are constantly moving, the soles are highly durable.

(2) Serving and Internet players

In front of this type of player more control network, it usually moves the feet behind more frequently when serving, so with durable toes and inner shoes are the most basic.

2. stadium type

Using different types of stadiums will have a different impact on the type of tennis shoes.The hard ground court requires that the shoes have higher durability, and the soft stadium, such as red soil, requires greater traction.

(1) Hard stadium

The design of hard tennis shoes takes into account more durability, providing a more flexible outsole and upper, and also has better support performance; on the hard ground, the soles may wear faster, and be sure to check it. Be sure to check it.tennis shoes are changed in time.The upper and outsole materials are cortical or ethylene -based material, which is more tough.

(2) soft ground court/red soil stadium

tennis shoes will consider the traction of the sole without damage when designing.

(3) A variety of venues

The design of this tennis shoes is suitable for various venues, which is convenient for players to play sneakers during various venues.

3. The right degree of foot type and shoes

Determine your feet before choosing tennis shoes.The feet are generally divided into three basic types: inside, normal feet, and outward (internal rotation).

Each pair of shoes is suitable for different people, each foot type and height, and arch.If you are not sure of the type of your feet, the simplest "wet test" can be determined.Simply put, wet your feet and step on a piece of black building paper.The characteristics of the footprint determine the type of the foot.

(1) Inside (internal rotation) overpowers

If you see a complete mark, and full and clear, it means that your feet are over -over.In the over -overrunrs, almost every step is to turn their feet inward, which requires a pair of stable tennis shoes to achieve better support effects.

(2) Normal foot neutral

If you see moderate space and visible arch areas, it means that your feet are normal, and you can try any kind of tennis shoes.

(3) Insufficient pride (inner rotation)

If the outside of the footprint is narrow and it is almost interrupted, your feet belong to the outward type.The fuggers are lacking inward inward during the movement. Choosing more flexible shoes can relieve and reduce the vibration while moving quickly and horizontally.