Wall cabinet installation method

1. Determine the installation location of the Wall cabinet

Hanging wall cabinets are generally connected to the wall with two screws. Therefore, you need to determine the location of the screw.The position needs to be determined according to the installation height and the position of the nail hole of the cabinet.The tools that need to be used when the installation position is mainly tapetage and color pen.

2. Use impact drilling perforation

After determining the drilling position, you need to use impact drilling.The shock drill is connected to the power supply and a deeper installation hole is made in the marked position.Pay attention to it, there will be no water pipes and electric pipes before drilling.

3. Use the hand hammer to load the glue particles

Before connecting the screws, you need to install the glue particles in the screw hole. The glue can better fix the screws.Use your hand hammer to knock the rubber particles into the drilling hole.

4. Install the screw connection cabinet and wall surface

After installing the glue, connect the screw parts to the cabinet and wall.Then the installed master then replaced the drill with a shock drill and nailed the screw into the wall.

5. assembly and handle

After the cabinet is fixed to the wall, the cabinet is left to pull the hand.The handle installation is relatively simple. Use the screwdriver to fix the handle and screw piece in a fixed position.

precautions for Wall cabinet installation

What we should pay attention to when we install the Wall cabinet is to be careful not to destroy the wall when installing.To keep the indoor air circulation, the cabinet body is dry and extend the service life.Avoid water, you should use the cloth to dry it in time if there are water droplets.Do not contact the cabinet with the ground during installation. soft objects should be matched to avoid bumps.Pay attention to the surface of metal objects such as screwdrivers and other short -distance plates.

12. Inspection before installation, discover abnormalities, and feedback for the first time in order to change it in time.

2Carefully check the identification of the drawing and the occlusal state of the scene to determine the installation order.

3Pay attention to the protection of product components during the installation process.

4, Beam position, top line, and closing plate cut corner corners should be checked carefully to cut accurate cutting.

5,Notice2Try not to place the layer of the plate side plate on the side of the cabinet2Inside the cabinet.

6If the diagonal cabinet of the tape is used is equal, the phenomenon of uneven layer should be placed with a planer to nail the back plate.

7If the customer should ask questions during installation, answer it in time, and inform the reasonableness of the processing method.

8If there is a problem with the installation, the installation workers must fill in the installation notes and change the re -order to do a good job of tracking services.

9After the installation, it must be self -inspection and adjustment, and then the customer is accepted and the signature is confirmed.

10After the entire installation service process is completed, the customer must be repaid a clean environment.

1. What is the difference between Beach towel and bath towel

beach towels and bath towels are a type of towels, and they look relatively similar, but they are still very different. The difference between beach towels and bath towels is mainly reflected in the following aspects:

1. Appearance

But look at the appearance, you can intuitively distinguish the beach towels and bath towels, because the color of the Beach towel will be more vivid and more patterns.It usually takes pictures, and the stylish and beautiful towels are better to take pictures; and bath towels are usually designed as light or dark single colors, which are matched with the bathroom style.

2. Size

The size of the Beach towel is slightly larger than the ordinary bath towel. Generally, there is probably one person in ordinary bath towels, and the Beach towel is paved on the beach to facilitate the user to take a day bath. Therefore, it will be designed to be larger.The head and feet are exposed to the sand.

3. Thickness

The thickness of the bath towels is very thick, because as a bath towel, its water absorption is very good, which is convenient to wipe the body out of the bathroom quickly after taking a shower; the thickness of the Beach towel is relatively thin.So good, but it is enough to make you dry your body quickly, and it is thinner and more convenient to carry.

4. Use

The bath towels we usually use are used for family shower. It feels soft and water absorption.However, when the towel was washed in seawater once or twice, it felt that there would be a odor and no longer softened.However, due to the particularity of the use of the Beach towel, these issues are considered in production. Even if they are repeatedly used in seawater, they will not have a smell and dry feeling.

2. Can the Beach towel be used as a bath towel?

Can.

The Beach towel is very large. It can be wrapped on the waist like a bath towel, put on the body, or used to wipe the body, but the Beach towel will be larger than the bath towel, which does not affect the use;It is impossible to use a Beach towel. On the one hand, the design of the bath towel itself is not used on the beach. On the other hand, the bath towels are not as durable as the Beach towel. Unless it is a special case, it is not recommended to replace the Beach towel with a bath towel.

Dragon boat flower breeding method

1 , Potted soil

Dragon boat flower is an instruction plant for acidic soil, so you need to choose a slightly acidic humus loam for cultivation. 2: 1: 1 The proportion is mixed and disinfected. The soil requires loose and well drainage.

2 , Light and temperature

Dragon boat flowers are happy, but avoid strong light.In the spring and autumn seasons, it should be placed in the place where the back wind is facing the sun. In summer, it needs to be shaded. In winter, the dragon boat flowers can be fully accepted.Dragon boat flowers are warm and warm, and it must be maintained in the winter room 12-18 between.In the spring of the Qingming season, the dragon boat can be placed outdoors, and the temperature in the autumn is lower than 15 Timely put the dragon boat into the room in time.

3 , Watering and fertilization

Dragon boat flowers like to moisturize the environment, but they are afraid of accumulating water.spring and autumn seasons every seasons 3 It is best to pour water permeability once. Water in the morning and evening in the summer and evening. At the same time, in order to maintain higher humidity, the leaf surface of the dragon boat flowers should often be sprayed in summer.Dragon boat flowers are like fat, but avoid thick Fertilizer and raw Fertilizer. In the growing period, it can apply rotten Organic fertilizer every half month.

4 Pelvic change

Dragon boat flower average 2 Change the basin once a year, the best time to change the basin is 5 At the beginning of the month.Some old roots should be removed appropriately when changing the pot.

5 , Prevention and treatment of pests and insect pests

The common diseases of dragon boat flowers include leaf spots, anthracnose and coal dirt.Essence

6. Breeding

The breeding method of dragon boat flowers is best to use cuttings. This method is easy to survive, and it is quickly flowering.Cuttings should be selected every year 3 As well as 4 The month is performed, and the two -year -old and lone branches are the best. After cutting 35 The dragon boat flowers around the sky will take root, 60 After day, you can move the seedlings.

How to trim the dragon boat flower

1, Cut off the weak and dense branches before the spring sprouts, and leave the branches born of the year3 Short -cutting left and right.New buds grow up with new shoots to grow 10 A pick -up at the left and right, retain the two bud points of the base, and promote the growing branches. When the branches grow to the seven leaves, they will be picked again to promote the split split sprout and speed up it.Flowing process.

2, The inflorescence of the dragon boat flower generally grows the top of the branches. After the first flower, you need to cut off the residual flowers in time to avoid the consumption of nutrients from continuing the residual flowers. In addition, it is necessary to apply phosphorus and Potassium fertilizer to promote the flowers of the plant again.

3, The branches that have been opened in the summer and autumn of that year must be short -cut, and only the base needs to be retained. 3 Just the sprout eyes, the length of the base pile is 10 The most suitable cm is the most suitable.

precautions for dragon boat flowers breeding

1 In the rainy season in summer, pay attention to drainage in time to prevent the roots of water.

2 When breeding of dragon boat flowers, pay attention to keeping the environment ventilation. Poor ventilation is easy to grow aphids and shell worms.

3 Dragon boat flowers should pay attention to thermal insulation when wintering, which is lower than long for a long time 0 At the time, frost damage is prone to.winter winter should be kept 10 The above, and give sufficient light.

4 Pay attention to the prevention and treatment of diseased and insect pests. The common diseases of dragon boat flowers include leaf spots, anthracnose, and shell worms. It should be mainly based on prevention, maintain the environment of the environment, and use it.

What are the Diving equipment

1. Facial mirror

The diving mirrors on the market now are mainly divided into three types: silicone, rubber, and PVC; rubber and PVC materials generally have some odors. The rubber material has rarely appeared in the leisure market. Generally, a few diving mirrors are made of silicone materialsIt is non -toxic and tasteless. The price is slightly more expensive than PVC, but it is softer, more durable, and more comfortable to wear.

The appearance is mainly divided into dual lenses and single lenses. There are no differences in these two uses, and the field of vision is similar. The advantage of dual lenses can be equipped with close -up lenses; the selection is mainly based on whether it meets its face shape and personal preferences; there is another kind of one; there is also one is that there is one.Fullface mask; Full mask, the design of this type of mask makes the divers not have to include the respirator in the mouth and combine the communication interface, mainly to enable the diver to achieve underwater calls; mostly for engineering diving.

2. Breathing Tube

The material of the respiratory Tube is also mainly divided into silicone, PVC, which is better for silicone tubes; structures are divided into all-dry and non-dry type;It is welcomed by junior players to prevent water from entering; but from a practical perspective, it is still a traditional non -dry respiratory Tube with simple structure and smoother breathing.

Buying note: The choice of respiratory Tube must meet the principles of ergonomics and mechanical design. The diameter size and length must be appropriate to facilitate drainage, and the design of the water stop valve must be available to prevent seawater from pouring in.The part of the bite should be the best choice for bite comfort.

3. Cold -proof clothing

Cold -proof clothing, also known as diving suit.It is mainly divided into wet, semi -dry, all -dry, wet type divided into 3 mm, 5 mm, 7 mm and other thickness.Wearing semi -dry and full -drying potentials, you can keep your body not wet, and you can also wear warm clothes in the interior. The insulation effect is the best.The choice of diving coats is mainly determined according to the water temperature of the diving environment; tropical or temperate waters, 3 mm thick wetwear are the most commonly used; the lower the water temperature, the thicker the need to choose a divingSemi -dry or full -drying; all dry clothes can even achieve under ice diving.

Buying note: In order to achieve the effect of preventing the cold, the cold -proof clothing must be fitted, soft, easy to unload, and not easy to deform, and does not affect the ability of divers to move.Secondly, choose the tricks you like.

4. Frog shoes

The frog shoes are mainly packed with foot frog shoes, and the adjustable frog shoes; the set of foot can only be worn, light and easy to carry; suitable for snorkeling, or indoor, and diving on the board.The role is to enhance the driving force and maintain balance.Floating activities are generally selected. Many junior players can easily ignore the role of frog shoes.

In fact, diving in the wild, frog shoes are more important than respiratory Tube. Wearing frog shoes at least half a life jacket.

5, buoyancy regulating vest

The BC style is mainly divided into jackets, system, backup type; bribium type is mostly used for technical diving.There are many models of BC, and there are many details in different brand models. When choosing, you should according to the specific needs of your personal; there is also a pre -type BC that is no longer used for water diving.It is very popular in snorkeling activities.

Buying note: The buoyancy regulating vest should be different due to the weight of the personnel, so you need to choose a buoyancy regulating vest suitable for personal weight.

6. First -level regulator

A diving brand has a variety of types of regulators to choose from, which is suitable for different needs; taking scubapro regulator as an example, MK2 is suitable for most leisure diving and diving training; MK17 is a fully enclosed design, especially suitable for ice diving, polluting water sources, etc.Special environment diving; MK25 can be used for large -depth diving.

Buying note: The first -level regulator and the secondary regulator are a group of combinations. The difference is that the first -level regulator is connected to the gas cylinder, while the secondary tunnel is used in the part of the mouth.

7. Second -level regulator

The regulator (also known as the respiratory) is divided into single Tube and dual -Tube type. When choosing, you should cooperate with your mouth shape and snake Tube.When cleaning and cleaning up, it should be placed in an environment where dry and is not easy to contact with salt, and should be checked once at least two years.

The spare secondary regulator is the standard and training subject in leisure Diving equipment.But I personally think that there is basically no chance to use it.If you need to spare gas sources, a better choice is to equip an emergency gas cylinder.

8. Diving instrument

The diving instrument has a single pressure gauge, a two -connected table, and a three -meter table; the single pressure gauge can only display the pressure of the gas cylinder, so that the diver can know the gas of the gas cylinder at any time;The depth of the pressure and the diver is located; one more northern needle of the three -meter table, when the diver needs to master the direction; there is also a rare four -meter table, an additional thermometer.

9. gas cylinder

The gas cylinder is divided into steel cylinders and aluminum bottles.Leisure diving mainly uses imported 12 -liter aluminum bottles. The aluminum bottle is resistant to corrosion resistance and long life.There are some supporters of domestic 12 -liter steel bottles and aluminum bottles in the underwater operation market. The main features are cheap, but the cylinders are easy to rust, and some new steel bottles have odors.

Buying note: depends on the depth of water and the amount of gas needed by the individual, and cooperate with your body shape and physical strength to choose the appropriate gas cylinder.Therefore, too long or too large gas cylinders will affect the ability of activity; and choose to prepare a gas cylinder with air storage device as much as possible.

10. Dignation

Due to the large buoyancy of the submersible, we must configure the heavy -duty and buoyant, otherwise the diver cannot be dived.The weight blocks are basically lead materials, which are divided into naked lead and environmentally friendly plastic lead blocks. The lead itself is toxic. It is recommended to use more safer plastic lead blocks.

11. hook, fast unloading ring

As the name suggests, it is used to help quickly load and unload the items around you.It is mainly used for Hanging cameras, flashlights, and knocks on the BC's Hanging ring.

12, gloves

Hands immersed in water are easily injured, so gloves are used to prevent injuries to being cut by thorns or sharp rocks.Depending on the water temperature, different thin gloves are optional.

13. Diving boots

Diving boots are mainly prevented from slipping in the slippery rocks.It is more suitable in China to use the foundation bottom, and it is more suitable for boat dives to use rubber bottoming shoes; and be careful to closely consolidate with frog shoes.

14. Diving knife

It is used to cut off the remaining fish or fish network cables in the sea to avoid entangled divers.It is a guarantee of diving safety.Ordinary stainless steel dive knives cannot remain sharp in seawater and are easy to rust.A better knife is a titanium alloy diving knife, light weight, sharp, never rust, but the price is higher.

15. lighting in the water

It is used to spy the dark world in the sea. The greater flashlight and lighting Lights are particularly effective. It is a must -have for diving at night or dark fields.

16. record board in water

Instead of communicating in water, in addition to communicating with gestures, another pipeline is to record the board in the water and write it down as a two -way between staff.

17. Diving computer watch

Diving computers have gradually become standard accessories that have gradually become diving activities.It is mainly used to ensure that divers stay within the depth and time limit.record the diving process, etc.

How much is a Diving equipment?

If it is snorkeling: the face mirror breathing Tube is sufficient, and dozens of RMB to hundreds of dollars can choose.

Deep diving (water diving): diving mirror, respiratory Tube, foot scallion, first -class head, secondary head, buoyancy regulating vest, three -meter table, gas cylinder, Diving clothes, etc., are about 4,000 in domestic. If the brand, the priceIt will be higher.

How to distinguish between Nike shoes

1, watch the routing

The workmanship of the genuine Nike shoes is very detailed. It stipulates that the length of each needle should be average, and there must be no jumping situation. The wiring is neat and well -proportioned, and there will be no phenomenon such as deflection and burrs.If it is inferior Nike or imitation Nike shoes, it is often rough and there are many heads.

2Look at the color

The color of the genuine Nike shoes is bright, and the balance has characteristics.The color of inferior shoes is dark and the color matching is very chaotic.

3, See the material

Really Nike sneakers are particular about materials, and the upper generally uses artificial Skin or super fiberPUAlthough they are not leather, they contain the fiber density higher than that of the leather. Toughness and breathability are better than dermis, and it is not easy to deform.And inferior shoes are often cheap materials.Therefore, the material is more shiny, otherwise it is fake.

4, Pinch with your hands

You can squeeze the surface of the shoes with your hands, or stretch the upper leather to feel whether it is tough and elastic.If it is very tough and elastic, it is true shoes, otherwise.

5, Rub the front foot of the shoes

Wearing real shoes rubbing the ground with the forefoot on the plastic or floor, there will be very loud and concise"Squeak" sound, and fake shoes will not have such a sound in general.

6, See the sign

The sign of the genuine Nike shoes is very clear. There are usually several signs. The price code is clearly marked.There are also detailed signs in the shoes, with shoes origin, size, number, date, etc.And counterfeit shoes usually only1-- 2A simple sign, very simple, detailed information without shoes.

7, Touch in the shoe

Put your hands into the shoes and feel that there are things that can fight with a ball, there are fakes, you can also try it on, feel comfortable, generally fake or imitated due to irregular hoe, or half of all half of all.The code is replaced by the entire code.

8, Look at the bottom

realnikeThe rubber outsole will not be faded. Take the black outsole on the white paper that does not fade back and forth, and will not fade. There will be no traces on the good floor. If it is a real rubber outsole,, Press the bottom with the nails, the real restoration is true, and it is fake that cannot be pressed back.There are some shoes for a long time, and the outsole has vomiting cream (white), if there is a fake or imitation.

Nike shoes true and false disagreement channels

1, To one -to -one comparison

The most scientific method is to compare the shoes in one to one, and it is true.The purchased Nike shoes and Nike are the same as the same model (the same color). If there is no difference, it must be genuine.If there is still a slight difference, it can be further compared.It mainly depends on color schemes, soles, signs, and so on.

2Counter verification method

The online shopping Nike shoes get the authenticity identification in the offline Nike counter.However, Nike launches thousands of models each year. Nike styles purchased and sold for a store are very limited. It is normal for the clerk to understand a certain product.From this point of view, the counter inspection of the counter may not be required100%Visible.

3, Submit to the retailer to identify Nike

Generally, the brand company does not accept the consumer's personalpin appraisal application, and the relevant national departments cannot verify.However, some sales platforms support verification and directly communicate with Nike by the platform to conduct official identification in accordance with the regular process.Nike sneakers products & gt; & gt;