one,Conference table positionArrange principles

1. The principle of respect on the left, that is, the left is top and right, so you must distinguish the left and right.

2. The face door is the above principle, which means that if the meeting table is facing the door, the position of the highest leadership should be to sit on the front.

3. The center is the above principle. It is necessary to ensure that the position of the highest level leader is in the middle position.

4. Based on the right principle, when the order is arranged in order, the higher level leaders are on the right.

5. The front row is the above principle. Like the conference room in the form of the hall, there are many participants, and the high -level position should be in the front row.

2. How to arrange the location of the Conference table

According to the traditional habits of the Chinese, generally follow the principles of "left -handed, middle, upper, front".

Single arrangement method is: when the number of leaders is strange, the leader No. 1 is in the middle, No. 2 leaders are on the left side of No. 1, No. 3 on the right, and others are arranged according to one left and right.When the number of leaders is occasional, the leaders of No. 1 and 2 are in the middle. The leaders No. 1 are ranked left in the middle of the center, and the right side of the No. 2 is still arranged in order to be arranged in order.If there are two rows of the podium, generally follow the principle of "the front, the back".

3. Conference tables for different shapes

1. Formula meeting

At the Square table meeting, pay special attention to the arrangement of the seats.If there is only one leader, then he usually sits on the short side of this rectangular short side, or a more position.That is to say, based on the door of the conference room as the benchmark point, it is the position of the guest on the inside.If you are attending a meeting from both the master and guests, you usually take them on both sides. The owner is sitting on the right side of the Conference table, and the guests are sitting on the left side of the Conference table.

2. Round table meeting

Another is to avoid this primary and second arrangement as much as possible, and the round table is the round table meeting.At the round table meeting, you don't need to stick to so many etiquette. Mainly remember that the door is used as the benchmark point. The positioning is the main seat.

How to prevent frozen frozen winter

1. Temperature Guide

In winter, the most important thing for succulent is the temperature. Master it well. Succulent plants can not only overwinter, but also become obese.

First of all, the flower friends should pay attention to the Outdoor temperature below 5 C, and take the succulent into the indoor or balcony; when the Outdoor temperature of the large area is lower than 10 C, the lotus palm, silver wave brocade, black mage, Xiong Tongzi, etc.Succulent plants should be quickly returned to the room.

In addition, the minimum temperature of the indoor environment is higher than 0 C, and the flesh can be safe to pass the winter; if the minimum temperature can be kept above 10 C, the Succulent plants will grow normally, and the flower buds can still add a little diluted organic nutrients that are diluted 500 times when they can dilute the organic nutrition of 500 times.Liquid is poured in fleshy to improve cold resistance.

Master these points to make your Succulent plants go smoothly!

Watering Guide

In winter, watering for succulents is the key to the state of succulent. If it is a relatively small succulent seedlings, then there will be more moisture it. It can be frequently watered to keep the soil a certain humidity.And try to put them in a warmer place, grow in a more stable environment.And the large Succulent plants will have much stronger resistance. Watering must be less, and it is not a problem to water or even a drop of water for a month.

Master these points to make your Succulent plants go smoothly!

Third, water spray guide

In addition to normal watering, it is important to spray water appropriately according to the weather.Because winter is also the most beautiful when Succulent plants need to seize this opportunity.It is generally recommended to spray water in the fleshy when it is sunny. After entering the winter, keep the air a certain humidity. With the temperature difference, the fleshy color will be faster.

Master these points to make your Succulent plants go smoothly!

Fourth, light guide

Light is too important for winter meat. As long as the flower friends have sunlight, they can take a few hours for a few hours.Even if you take the fleshy all day in winter, as long as there is the sun, it is okay.You will find that the fleshy of the sun is called a beautiful color.

Master these points to make your Succulent plants go smoothly!

Five, fertilization guide

In winter, many fleshy plants do not need to fertilize, but for the "winter species" and "intermediate species" that are still growing, they need to supplement certain liquid Fertilizer. flowers can use the organic nutrients fermented by pure plants at noon, the organic nutrition fermented with pure plants fermented with pure plants fermented.The liquid is 500 times the water, and the flesh is poured to supplement the nutrition to the succulent to grow obese.

[The role of the knee pads] What are the characteristics of the knee pads?

The knee pad refers to a piece of fabric for protecting people's knees. In modern sports, the knee pads are widely used.The knee is an extremely important part in exercise, but also a relatively fragile and easy -to -injury part. It is also an extremely painful and slow recovery when injured. Even individual people will have a faint pain when it rains.Almost all sporting goods stores can buy "knee pads" of thick felt materials that can be reduced and avoid injuries to a certain extent. In winter, it can also play a role in cold protection, and the price is not expensive.This is not recommended by "knee pads" as a must -have, but it is also the fact that all sports activities are widely used.

What are the effects of knee pads

There are three points of knee pads, one is braking, the other is insulation, and the third is health care.It s not much to say. The knee part is often easy to be cold. Many knee joint diseases are related to the cold knee. Especially on the mountain, the mountain wind is very cold and very hard.It is very hot, and the knee is not hot because there is no muscle exercise. When people feel that the leg heat dissipation is very comfortable, the knee is actually cold. At this time, if it is wearing a knee pad, the insulation effect of the knee pads can reflect the insulation effect of the knee pads.It's right.

Mainly talk about the braking effect of knee pads.The knee joint is the place where the upper and lower leg bones are intersecting. There are half -moon boards in the middle. There is a Bone in front. The Bone is stretched by two muscles. It is very easy to slide before the legs of the legs.The influence is not strenuous, so the Bone can move normally in the knee.Because the mountaineering movement puts too much pressure on the knee, coupled with the severe exercise in the mountain climbing, it is easy to make the Bone be removed from the original part, causing the disease of the knee joint.The knee pad can fix the Bone in a relatively stable position to ensure that it is not easily injured.The above is the mild braking effect of the knee pads when the knee joint is not injured. After the knee joint is injured, the use of severe braking knee pads can reduce the bending of the knee, and maintain it from the thigh to the calf on a straight line to reduce the knee joint.Bending, thereby protecting the knee joint no longer aggravate the condition.

Let's talk about the health effect of the knee pads, which is better to understand. Under the premise of the premise of the traditional knee pads, the long -infrared negative ion energy layer is added to the production material of the new far infrared negative ion knee pads, which can cause the knee to cause the kneeThe resonance of subcutaneous biomolecules will cause deep tissue to heat up, play a role in promoting blood circulation, improving microcirculation, and relaxing the activity. It has long adhered to knee diseases such as arthritis and rheumatism.

Select two kinds of knee pads for different functions.One is the kind of thick in Outdoor shops. There is a large hole in front of it that can expose the knee. Generally, it is bundled, and then a fixed knee pads are fixed.This kind of knee pads can make the knee not be easily bent, and the thighs and legs are always on the knee on the knee. Therefore, it is very suitable for the severe "braking" after the knee injury.Language to protect the knee.The other is the knee -knee cooker put on the knee. It has a certain elasticity. After bringing it, the knee can still be free to move, but it can obviously feel that the Bone is gently tightened a bit. This kind of mild braking is brakingThe knee pad can be used for the protection of the knee in normal exercise, and this kind of knee pad breathe is very good. Usually it will not feel that it is not convenient. ThereforeKneeling.

What are the characteristics of the knee pad?

Knitting fabrics adopt a high -elastable 1: 1 episode of the tissue tissue structure of the rib Tattoo pad. While the Rubaus cotton blended yarn is woven, the elastic yarn of the rubbing rubber band is more elastic, more elastic, more comfortable to wear, more comfortable to wearEssenceThe structural design is reasonable, integrates health and comfort, and has a significant effect on knee rheumatism, arthritis, pain, swelling, numbness, not flexible, and tormented.Auxiliary role.It is especially suitable for the needs of the elderly, athletes, and other people with leg diseases.It can improve the blood microcirculation of the joints, promote blood circulation and blood stasis, dissipate analgesia, promote inflammation absorption, and repair the repair of joint tissues, improve the activity of the corresponding joints, and to the corresponding parts of arthritis, joint water, varicose veins, and vascular tunnels on the corresponding partsIt has obvious symptoms such as inflammatory and rheumatoid arthritis.And it is different from the various magnetic health products sold in the market. There is no magnetic hard block in the product, comfortable to wear, and convenient washing.

The bundled open -knee pad this bundled open -knot knee is made of the world's advanced protective materials. The design is reasonable. Special thickening and strengthening treatment is performed at the open hole to better protect the knee to avoid horizontal displacement.The improved magic sticky allows users to adjust the looseness arbitrarily.Bringing it when climbing can effectively prevent the damage to the knee joint.

Shading coefficient is good or good

The smaller the sunshade coefficient, the better the performance of the sunlight to the indoor radiation.As the state's requirements for building energy conservation are getting higher and higher, as far as the requirements of building glass are concerned, the most important is the Shading (sung) coefficient SC (or SE) and the heat transfer coefficient K value (or U value).The hid coefficient of ordinary glass is about 0.9, so the glass should be processed on the surface, such as thermal reflex glass, low -radiation glass, etc., thereby reducing the shade coefficient.

glass shade coefficient concept description

1. The shade coefficient includes not only the sunlight (300nm-2500nm spectrum) penetrating the glass into the room, but also the energy of the secondary heat transfer of the glass.EssenceThe glass of the glass will absorb the energy of some sunlight, and its own temperature rises. At this time, the glass will be transferred to the room for the second time through radiation and convection.If there is a piece of tea -colored glass, the direct transmission ratio is 50%, and the total transmission ratio of the Solar light is 63%. So 13%of the amount of the glass is the secondary radiation after the glass absorption.

3. The value of the solar energy of the standard 3mm white glass is called the direction ratio, and the value of my country is 0.889, and the international is 0.87. It seems that this difference is not very large, but when it is involved in foreign construction projects involved There should be consensus.Example Calculate the shade coefficient SC = solar energy thermal coefficient (SHGC)/route ratio.When the SHGC is 0.818, the domestic calculation value is 0.92, while the overseas calculation results are 0.94.

3. The sunshade coefficient detects the full spectral energy of the Solar radiation, including ultraviolet light, visible light and near -infrared light in the 300nm ~ 2500nm band. These light shots can produce calories when entering the room.The smaller the sunshade coefficient, the less sunlight entering the room, the smaller the calories that can produce.Low shade coefficient does not directly mean that the visible light transmission rate is also low, because when maintaining the visible light transmission rate, reducing the transmission of near infrared can also reduce the shade coefficient.

4. The shade coefficient is a proportional value of a 3nm transparent glass, which does not mean that the sunlight of the sample glass is always transmitted.For example, when the shade coefficient of the glass is 0.5, it cannot be considered that this piece of glass can enable 50%of Solar radiation heat to enter the room. It should be understood that the Solar calories that the glass can pass through is 50%of the standard 3nm white glass.When the sunshade coefficient of the glass is 1, it means that the total direction ratio of the sunlight of this sample is equal to the standard 3nm white glass.When the shade coefficient is 0, it means that the sample cannot be directly passed through the Solar light through the sun, nor can it be transferred to the solar energy.

5. The heat controlled by the shade coefficient is not the same as the heat control of the heat transfer coefficient. The latter refers to the heat transfer caused by the temperature difference. The former is mainly aimed at Solar radiation.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

[Sea fishing bait formula] What bait is the best way to make sea fishing bait in sea fishing

What bait is the best for sea fishing

Sea fishing bait is rich in types, which can be divided into five categories: cyclic insects, shellfish, crustaceans, fish and plants.

1. Sea crickets, red sea bugs, blue sea insects, and sand silkworms of cyclic insects are used to fish sea bass, black snapper, Haruki, sand shuttle, sea bream, black hair, river fish, mullet, sea eel, yellow chicken fish, yellow chicken fish, yellow chicken fish, yellow chicken fish, yellow chicken fishetc;

2. Shells of clams, light vegetables, snails, rattan pots, permanent sections, stone robberies, oysters, etc., are used to fish stones, black snapper, peeling fish, river fish tun, eagle feathers, etc.

3. HP, crab, shrimp, lobster, sea cockroaches, Antarctic shrimp, etc. are used to catch Jiaji fish, sea bass, black bream, yellow chicken fish, black hair, river fish, red seas, seaEels, breakers, stone Dogs, grouper, and so on;

4. fish autumn knife, bitter Taipa, green scales, small rolls, bomb fish, etc. are used to fish black bream, stone Dogs, Chunzi, mullet, crane, , Jiaji fish, sea eel, stone, stone, stone, stone, stone, stone, stone, stone, stone, stone, stone, stone, stone, stone, stoneSatta fish, leucorrhea fish and so on;

5. Plants, seaweed, seafood, sea cabbage, and antlers, used to fish black hair, white hair, stinky fish, inverted fishing and other fish.

silk silkworms are the most popular of many bait. Salmon silkworms are mainly divided into red and green silkworms.

Red silkworms are thick and flat, have good meat toughness, strong hooks, and are not easy to rot.It is the most suitable for fishing for fishing; the price of green silkworms is relatively cheap, its body is soft, and the fish likes to peck, but it is easy to rot.

Generally, bait shops are sold in sand silkworms. silk silkworms have strong vitality, moderate size, and can survive for a long time after being hooked.The edible shrimp sold in the market is generally too big to make bait, but small shrimp (such as red rice shrimp) can also be bought for bait.Small shrimp are used for fish fishing and other fish species; prawns are usually used to fish large grouper and sea bass.Dead shrimp is the cheapest and most suitable for amateur enthusiasts.

Sometimes, sea fishing enthusiasts make the fishing fish bait, but they are not as attractive as raw shrimp and sand silkworms.It is most suitable for fishing crabs with fish, because crabs love to eat fish.If you catch up with the season of fishing mackerel, the small fish is an excellent bait.In addition, snails and sea cockroaches can be caught by the seaside. These are superior bait, which is attractive, and the body is juicy and tough and resistant to fish bites.

Sea bait production method

The main ingredients of this kind of sea fishing bait are chick feed and shrimp oil.Chicken feed can be bought in the flower and bird market or bird food restaurants across the country, and the price of each category is ranging from 2 to 8 yuan.Its main composition is powder made of rice, Wheat, or corn, and Bone meal, fish powder, and various vitamins and trace element additives are mixed in proportion.We only need to buy chick feed per kilogram of 3 yuan.Shrimp oil, also known as fish dew, is unique to Fuzhou. It is loved by Fuzhou people at home and abroad. It is a water dosage type.The fermented liquid is made of a fishy smell.Foreigners are generally difficult to accept, but the older generation of Fuzhou people cannot smell the smell of shrimp oil.500 milliliters of bottled shrimp oil are only 2 to 4 yuan. We make sea fishing bait, and ordinary shrimp oil can be used.When self -made, buy chick feed in the basin and pour shrimp oil. The amount of shrimp oil is based on the slight more than all chicks.Add a little height of sorghum tune wine. After mixing well, put it into a plastic bag and seal and ferment for 1 to 2 days as the base bait.The effect of fishy smell and adhesive, it is advisable to disperse 5 to 10 minutes after the bait group falls to the bottom.

Some fishermen who are particular will also be mixed with seafish internal organs, pork, and shrimp (small shrimp caught from the sea), blood clots, etc.Sea fish's internal organs can be collected to the market in the market a few days before fishing. There is no need to spend additional money, marinate with refined salt, and cut into small segments and mix into the basic bait when used., blood clots and other things can buy price reduction products before the big supermarket daily.I bought a pupa once, only 0.5 yuan per 500 grams, which is very affordable. Glimmeter can be used as auxiliary materials.