1. What are the raw materials for mechanical charcoal

Mechanism charcoal, aliasing mechanism charcoal, artificial charcoal, recycled charcoal, smoke -free cleaning charcoal, is a charcoal rod -shaped material squeezed by wood squeezing materials. Internationally, it is publicly regarded as green and environmentally friendly products.The density of mechanism charcoal is close to coal, which is more than three times that of ordinary charcoal, and smokeless when burning. It is mostly used for barbecue charcoal. Industry can also be used in the production of mi -molized charcoal and steel smelting or serving as boiler supplementary fuels.

The raw materials of the mechanism of charcoal have a wide range of raw materials, and the rice shells, peanuts, cotton shells, corn cores, corn stalks, sorghum stalks, bean stalks, sawdust, wood chips, granular shells, coconut shells, and coconut shells can be used to produce mechanism charcoal., Shave, bamboo dandruff, and rice shell are relatively good production materials.

2. How can the mechanical charcoal be ignited quickly

Mechanical charcoal ignition takes a certain time. If you master the correct method, you can shorten the time. The ignition method of the mechanism of charcoal is:

1. Flexible solid fuel block

Although liquid alcohol and gasoline fire quickly, it is not safe and the cost is relatively high, and the solid fuel block is much more convenient. Generally, it can be purchased from outdoor products, barbecue restaurants or sales of charcoal.You can buy online.By fire with solid fuel blocks, pay attention to ventilation. First, smash some small pieces of mechanism charcoal, and then find some small wooden sticks to put it into a shelf, put the mechanism charcoal, and wait for the wooden blocks to be flickered after the wooden block is completely burned.

2. Blind charcoal

The fire charcoal is specially used for fire, which is particularly easy to burn, but the disadvantage is that it is large, it is easy to stain the hand, and the price is not cheap, and the practicality is not very strong.

3. Wooden block fire

Just find some pine blocks and bamboo sticks, split into small pieces and stack it, leave a little gap, then lit the wooden blocks below, and put a few mechanism charcoal.It should be noted that artificial synthetic materials such as plywood should be used to avoid harm of chemical release.

4, point charcoal stove

It is specially used to give the mechanism for charcoal and round charcoal. The carbon method is to ignite the liquefied gas.

Reminder: Don't forget to prepare a bucket of water or fire extinguisher when igniting to avoid accidents.

Third, the mechanism of charcoal and fruit charcoal is better

1. fruit charcoal

fruit charcoal is the fuel that has been burned, distilled and other processes after the logging of the log, and the common fruit charcoal on the market has apple wood and litchi wood. The advantage is that it is easy to ignite.Taste, the taste of baked is particularly fragrant.

2. Mechanical charcoal

Mechanical charcoal is a charcoal made of charcoal machine. Because the carbon content of the mechanism is high, the density is large, and it belongs to waste use. Therefore, compared with the fruit charcoal, the mechanism charcoal is higher temperature, combustion -resistant, and environmental protection.The disadvantage is that the ignition point is high, it is difficult to ignite, and it is easy to fire.

In general, these two types of charcoal have their own advantages and disadvantages. When barbecue, you can choose according to the grilled ingredients: if you bake things are vegetables, you need to brush a lot of oil, then Maigoo Xiaobian recommends that you use fruit with fruit.charcoal, because the temperature of fruit charcoal is lower, the oil droplets are not easy to get angry; if it is baked, it is recommended to use mechanism charcoal, such as roasted whole sheep, because the mechanism of charcoal is high -temperature flame -resistant, and the efficiency is higher.

How to raise potted plum blossoms

1. Select pot & amp; change pots

Potted plums are commonly used in pots with a diameter of 20-25 cm.After the Potted flowers, the pot is replaced. The pot is changed to remove the plum pile on a sunny day to remove the soil, cut off the long roots, dry roots, and rotten roots.

2. Soil selection

Plum potted plants can be mixed with fertile garden soil, corrupt leaf soil and coarse sand mixed soil, plus a small amount of Bone powder.

2. Change the pot and change the soil

Potted plum blossoms need to be turned over for two to three years. The soil can maintain soil fertility, which is conducive to the growth of plums.When changing the pot soil, you need to change a larger container for maintenance. Do not harm the root of the plant. The soil changing can be mixed with rural soil and rot leaf soil according to a certain proportion, which can promote flowering.

3. Reasonable watering

plum blossoms like to grow in warm and humid soils. Watering frequently should be frequently. spring and autumn can be watered every two to three days. The temperature in summer is relatively high. The steaming effect will cause too much water loss.Once, when the temperature is too high, it is necessary to spray water to cool down, and wait for the soil to dry in winter before pouring.

4. Reasonable fertilization

Plums require sufficient nutrients, but each fertilization should not be too much, otherwise the root system will be burned. When the growth is strong, they need to be pursued every half a month.Organic fertilizer can make plum blossoms waiting for sufficient nutrients, and the flowering period can promote plum blossoms.

5. Reasonable trimming

Plum Flower pot plants need to be trimmed frequently to control the size of the plant. If there are branches that grow too high during trimming, we must topical and avoid the high plant type., Avoid nutrients, can also make the space structure reasonable, increase light transmission, and make plum blossoms more branches.When each branch grows to 25 cm, the top part can be removed. It can be trimmed at least once a year. You can also cut the cliff, dry type, and so on through your own hobbies.

Plum bonsai Style

1.

1. Dry type: The bonsai trunk is irregularly bent. Do not bend too large or symmetrical. The purpose of pursuing nature is the purpose.

2, oblique drying type: sparse shadow oblique side, plum blossom oblique dry type.The tilted and dry plum bonsai is easy to make, as long as it is placed when planting.

3. Lie dry type: thin branches and jade leaves, plum blossom trunks are close to the pot surface, heading on the head, looking back, elegant and beautiful, beautiful attitude.

4. Cliff type: Cliff -shaped plum bonsai, when cultivating small trees, press down the trunk, put into the basin and make a cliff shape.The cliff -like plum bonsai has an elegant charm and is loved by ancient and modern people.

5. Dynamic branches: Generally made from Zhenmei plum blossoms.Its branches are naturally drooping and elegant.The plum blossoms can be obtained through ordinary plum blossoms.Making bonsai with plum branches can be supplemented by Panzha, which increases its drooping range to make it more elegant.

PS: The dryness of the plum bonsai can be achieved by cutting and leather with knife.When carving or tilting Skin, it is not suitable for completing the entire trunk at one time.It should be operated on one side from top to bottom to keep the trunk upward water transmission line.The operation line can be changed, such as spiral or entanglement.After the wound scars, do the same on the other side.If you feel that the vicissitudes are not enough, you can repeat the operation many times.

Two, root

The roots of the tree should be sagged from the root and wrapped with each other.Lugen can show the ancient elegance and fragrance of plum trees in various forms.The lust -rooted plums are mainly hung on the surface of the Flower pot like an eagle claw.When the plum pile is placed on the pot, it can only be formed by tied its parallel root into an inclined form and cultivate them.

Three, branches

The shape of plum bonsai branches mainly depends on pruning.plum blossom pruning is mainly performed after the flowers are withered.The trimming is mainly done by cutting, sparse branches, contraction, buds, and heartbroken.

1. Trip: It is part of the penetration of the potted plum blossoms in one year.Generally speaking, the new plum branches are cut lightly.For adult branches, it should be briefly short.Depending on the shape of the shape, the length of the branches to be retained and the budding direction should be kept.The short part is 1/3 of the cuts, and the shorter part is 2/3 of the cut branch.

2. Comb branches

Mainly cut off the dense branches.First, the dead branches, pest branches, cross branches and overlapping branches are cleaned up.increase plant ventilation and light transmission, and promote their healthy growth.

3. contraction

Generally speaking, branches of more than 2 years have been cut short to achieve younger.This pruning method is widely used in plum pruning technology, and it is also an important measure for plant shapes and trees.The trimming time is generally selected in the late spring and early summer.

4, scratch bud

This is well understood. Wipe off the new roots, dry buds, and axillary buds in time. At the same time, pay attention to retaining the direction of the buds to prevent the new sprouts from germinating cross branches, raw branches, overlapping branches and branches, which affects the beauty of plum bonsai.

5. Tool

The main purpose is to inhibit the growth and shortening of the side branch.When the bonsai grows 2-4 new leaves, the time of control is controlled.Stepping plum blossoms can stimulate the side branches to sprout and increase flowering.

1. How long can tennis shoes usually wear

Because the tennis courts are mostly hard ground venues, the ground is relatively rough, though tennis shoes are more resistant and wear -resistant, they are still very easy to wear.It is normal for people who often play tennis. It is normal to wear a pair of tennis shoes from February to June. It is not that the service life of tennis shoes that often play is generally about one year to a year and a half.

Observing your own soles of the shoe can also judge what problems when playing. For example, the soles of tennis shoes are usually worn from the toe.The pace of tennis is based on the toe gripping ground, and is preparing to move and hit the ball.When moving in real time, there is also a situation where the heel is needed first, but in the end, it is necessary to kick the ball (front foot) to complete the hit.If the soles of tennis shoes are worn from the heels, it shows that the basic footwork and force are still stable.Some people's soles are worn from the toes of the right foot.This is caused by gathels to the left leg when serving, and the right foot toe finally kick the ground when the right foot is hit.Because of the powerful grip (kicking), the soles will be worn from this part, and the soles of professional players are the same.

2. Under what circumstances do tennis shoes need to be replaced

The detachment, wrapping and supporting indicators of tennis shoes are limited to exercise time and exercise strength.After the length and strength of the design accumulate, even if the sneakers are not very obvious, their various properties will be discounted.The following situations need to be replaced with tennis shoes:

1. Look at the sole:If the heels of tennis shoes have obvious arcs and the soles or signs are blurred, they should not hesitate to replace it.

2. Look at the shape of the shoes:If the tip of the shoe of tennis shoes is tilted up too much, or the heels collapse from the inside, it should also be replaced.

3. Look at the physical response:If you wear a pair of tennis shoes for a while, you feel that the ankle joint, knee joint, or waist is a little uncomfortable or even painful, which means that these shoes are not suitable for you, and if a pair of shoes have become twisted with your feet,This should be replaced.

1. The name of the name of the bikini Swimsuit

On the hot summer, people like to surf, swim, and cool off the beach.Wearing a sexy bikini Swimsuit beauty is one of the particularly attractive landscapes.So why is a bikini Swimsuit called a bikini Swimsuit?What is the source of the name of the bikini Swimsuit?

The name of the bikini is derived from the bikini Islands of the Marshall Islands in the Magniculia region of the Pacific.bikini Island, located at 11 35 'north latitude, 165 25' east longitude, is a nuclear bomb experimental base in the United States.From 1946 to 1958, the United States conducted a total of 67 explosions of the original bullets and hydrogen bombs in the Marshall Islands. The largest one was on bikini Island.Designer Louis Reald believes that the bold design and appearance in 1946, its influence is tantamount to a nuclear explosion, so it is named "bikini Swimsuit"!

Second, the development history of bikini Swimsuit

As early as 1400 BC, the "bikini" for girls and upper and lower underwear for girls had already appeared.Evidence can be found in the Greek tomb or at that time.

Around 1890, European swimming enthusiasts needed to change the Swimsuit in the locker room on the wheels.The ladies sew the edge of the Swimsuit to prevent clothes from shrinking upwards, revealing their thighs.

The prototype of modern bikini began in 1907.At that time, Australian swimmer Annette Kellerman was arrested on Boston Beach for wearing a "bold" bikini Swimsuit.

In the 1920s, there was one public management measure in the United States at the time that women were prohibited from wearing a 6 -inch Swimsuit with a knee of 6 inches.In 1922, Chicago, USA, a policeman arrested a girl wearing a Swimsuit in a public place.The United States implemented a Swimsuit ban at the time. In addition to the swimming area, women were prohibited from exposing their bodies.

In the 1940s, the war system at that time stimulated the development of Swimsuit. The US government ordered manufacturers to minimize the use of textiles as much as possible, resulting in the naked belly of the girls' clothes.American fashion stores began to sell swimwear.

On July 18, 1946, the bikini designed by French designer Louis Reald to protect the breasts through a bra. The back was almost naked except the rope band.Legs.It has a simple structure, small and exquisite, and the cloth used is less than 30 inches. It can be put into a match box with a ball.The swimming is selected with fabrics printed with newspaper content sections.Because the atomic bomb conducted the first global test explosion on the bikini Island of the Pacific Marshall Islands, the Swimsuit was named a bikini.Put on a bikini under the public.

In the 1950s, bikini was accused by many European media in order to destroy the aesthetic standards for clothing design. Many national governments issued relevant laws and regulations. women are strictly forbidden to wear bikinis in public.

In the early 1960s, the bikini girl appeared on the cover of the American erotic magazine "Playboy" and "sports Pictorial".When in 1962, when the bikini was beaten into the "Cold Palace", Hollywood movie star Marilyn Monroe appeared on various fashion magazines in the movie screens and art photos of bikini.As a result, bikini's status in the fashion industry has a real turn.In the same year, in the 007 series of film "Dr. Nuo", the Swiss actor Usula Andose wore a homemade white bikini from the Lakes of the Caribbean Sea.

In 1964, designer Rudy designed a top -LessSuit without a bra to vent his lust under the pressure of high industrialized society.In the same year, the designer Corner launched a Swimsuit with fishing nets to cover up the front chest and waist. Special materials symbolize the designer's pursuit of nature and freedom.

From 1970 to 1980, no structured bikini came out.The so -called non -structured is that there is almost nothing except the lower body.The emergence of this bikini means swimming without wearing a shirt.

In 1992, Corch discovered that breast enhancement was about to be re -popular, so immediately developed an inflatable Topsecret. This is a bikini with tiny inflatable plugs hidden in the bra. women can use it to use it to use it to use it to use itThe chest is straight and plump.

In 1995, as high -tech materials entered the fashion industry, the design of bikinis became richer. Combined with the retro style, a new and gorgeous bikini appeared, such as bikini with a rhinite.

The evolution of bikinis has not stopped.With the change of the times and the innovation of designers, the style and material of bikini are constantly changing.Today, bikini has become a classic item in the fashion industry, with a variety of styles and colors to choose from.

Although the origin of bikini is related to nuclear bombs, it has come out of that dark era and has become a symbol of beauty and confidence.Regardless of your body shape and age, bikini can show you your beauty and charm.

1. What is the price of the Architecture Chongka clothes?

The priced price of the Architecture birds in the flagship store is generally around 4500-7000 yuan. The Architecture's jacket uses the most advanced materials and technologies, such as Gore-TEX, Event, etc., ensuring the best windproof, waterproof and breathable performance.These high -quality materials are the key to ensuring the performance of the jacket, and also increase the cost of the product.

In addition, as a high -end Outdoor brand, the positioning and professionalism of the Archeopus attracted specific consumer groups.brand premium and association with high -end brands make their products relatively high.

Second, the males of the bird's punching clothes, okay?

With its excellent functional and fashionable design, the males of the Ariter Bird quickly emerged in the fields of mountaineering, climbing and skiing.Athletes wearing the athletes of the Archeopus showed well in various harsh environments and won a good reputation for the brand.In addition, the males of the bird also have a high degree of breathability and warmth, comfortable and durable, and become one of the essential equipment for global Outdoor enthusiasts.

In addition to functionality, the males of the bird birds are also known for fashionable design.From the earliest hooded styles to the current colors, patterns and accessories, the malesbirds are continuously innovated in design to meet the individual needs of different consumers.The brand's iconic yellow and black have become a symbol of fashion and strength, so that wearers can show their own style in both cities and wilderness.

Generally speaking, the males of the bird's punching clothes are relatively good. It continues to launch new jackets, improve materials and craftsmanship, and push Outdoor clothing industry to a new height.Supreme Bird's Chongtong Products & GT; & GT;

Arc'Teryx

Amafen sports products Trading (Shanghai) Co., Ltd.

• Origin: Canada
• Registered capital: $ 2.5 million

The Armaotor Bird, founded in Vancouver, British Columbia, Canada in 1989. The production of some affiliated products was moved to New Zealand, Vietnam and China.Rock climbing, Hiking and other activities.Its headquarters, design studio, and the main production lines in Vancouver.Due to its almost crazy pursuit of new craftsmanship and new technologies, in just ten years, it has grown into a recognized Outdoor brand in North America and even the world, and has good products in the field of clothing and backpacks.Its products are mainly involved in Hiking, climbing and ice and snow sports.The malesbird is known for its enthusiasm for design, craftsmanship and performance.Unique manufacturing process creates credible ... more& gt;