What is the difference between Chinese kitchen knife and western -style kitchen knife

Chinese kitchen knife

There are many classifications of Chinese kitchen knives: sliced knives, mulberry knives, cultural martial arts knives, machetes, peeling knives, leather knives, chopped knives, Bone knives, pork knives, and roasted swords, various types, not less than Western kitchen knives.However, they are almost the same, and it is normal for many people to distinguish.

The advantages of Chinese kitchen knife are obvious. Cutting knives, as the name suggests, can be cut or cut.If you can only have a knife, it must be this knife.

At the same time, there are many shortcomings.Chinese -style kitchen knives are heavier than Western kitchen knives, and girls are working hard.The blade is wide, and you can't see the ingredients to be cut, and it is easy to scratch your hands.

If it is a knife that is cut and cut, the blade mouth is large and the sharpness is reduced.

Western kitchen knife

Western -style knives are widely classified: sliced knives, chef knives, cattle knives, three virtue knives, boneless knife, peeling knife, bread knifeNympho

The concept of special swords has been circulating in the West and Japan for a long time, so their knives have various types.

For novices, it will be easier to master with a western knife. The blade is narrow, and the ingredients can be seen. It is not easy to cut it.The weight of the knife is also appropriate, and the slices and cut vegetables are easy to use.Especially the tip of the chef knife and the cutting knife, the small and fine ingredients are 100 times more flexible than the kitchen knife.

However, the Western knife may not be completed for the Chinese cuisine that needs to be used by Chinese knife workers.For example, the beef balls of Chaozhou, the beef ball made of chef machine grinding meat, are not the same as the Chaoshan hand -to -beer beef ball.

Second, which is the best Chinese kitchen knife and western -style kitchen knife

Traditional Chinese big kitchen knives tend to walk around the world.However, the knife is relatively high. Like young people entering the kitchen, in fact, Chinese kitchen knives are not very friendly to them.Of course, if you have been cooking for many years, the knife workers can do it, and it is not difficult to use any knife.

Many young families now choose to be as follows; a Bone cutting knife, a three virtue knife, and a peeled knife.

A machete, dry and rough, handle fish heads, chicken, ducks and geese, and ribs; a three -moral knife, cutting meat slices and vegetables; a Bone -to -knife, using meat; a peeled knife, specifically handling fruits.

The sliced skeleton has been cut, the division of labor is also clear, and the old people are comfortable to use.

Third, why is the Chinese -style kitchen knife and Western kitchen knife different

Chinese and Western demand for knives is different, resulting in such a big difference in kitchen knives.

Chinese food has a basic skill, called cut pier, also called knife.The Square knife is easy to force down, and the western food is to cut everything and paint, or fry.

The advantage of Chinese kitchen knife is that a large knife body is easier to hold back the knife body with a finger joint and retreat with cutting vegetables to cut out finely well -proportioned vegetables or other foods.

The pointed kitchen knife commonly used in the West is more handy when dealing with meat. You may wish to experience the feeling of cutting potatoes and cabbage with a pointed kitchen knife and handling the elbow with a big kitchen knifeIt is not very comfortable, but can do it.

Therefore, they are used to their own suitable forms.

1. How to buy sports and leisure pants

sports and leisure pants are pants that combine exercise and casual elements, which were originally suitable for sports occasions.This kind of pants usually have good hygroscopic breathability, fast dryness and elasticity, suitable for wearing in various sports.With the pursuit of comfort and fashion, sports and leisure pants have gradually become one of the choices for daily leisure.So how to buy sports Casual pants?

1. There are many types of sports Casual pants, and the style is also varied, which can be selected by your subjective feelings.

2. If you choose a straight type, because he keeps consistent from top to bottom, it will not be tight and comfortable to wear.However, girls with thick legs are not recommended.

3. The other is the type of upper and lower Xiaotu. This is like the previous flared pants, which highlights more shapes.

4. There is another type of tight -fitting. Compared with others, the performance of improving exercise will be stronger.Some people often wear in the gym.

5. In addition, you can also choose according to the length of sports Casual pants.

6. In the end, you can also choose decorative sports Casual pants. Now young people like independent different pants, which can meet this need.

2. Where to buy sports and leisure pants

1. physical store:It is a traditional way to go to physical stores. You can try it on in person, feel the fabrics and versions, and choose the style and size that suits you.Both brand stores and large shopping malls are where you can consider.

2. Official website:Many brands have their own official websites. You can choose your favorite sports Casual pants on the website, and choose to buy online payment or payment.

3. E -commerce platform:On the e -commerce platform, many sellers of sports and Casual pants can be found.You can browse the products of different sellers on the platform, compare the price and evaluation, and choose the right seller to buy.

4. Social media platform:Some social media platforms will have some micro -business or social media celebrities for sports products. You can buy them by paying attention to these accounts during live broadcasting.

planting method of Artificial lawn

one,Sowing method

Most lawn can be sowed or sowed in spring or sowing seedlings in late autumn.When a lawn is established in large areas, sowing machines can be sowed, and small area sowing is used in small areas.After sowing, use a rake to rake each other, and then suppress it with a wooden cricket.After the granular seeds are planted, the straw should be covered.The sowing method requires skilled sowing technology to ensure uniform planting.In addition, management is more expensive.

Second, paving method

Although this method can quickly build a lawn, the process is too complex and the investment is large.

three,Stem

Forcetic straw species, such as Dogs, Carpet grass, fine leaves, creek cuts, bull grass, etc., can be reproduced with stems.It is best to do it when the grass Skin is germinated in early spring, or it can be carried out in the rainy season.First cut the stubs from the lawn floor and cut it on the shade of the shade5--8In a small section of centimeters, there must be a section on each paragraph, otherwise the new root cannot be germinated.Then broadcast or sprinkle.

Broadcasting: In a flat location, open shallow grooves with a small pick, pour foot water, and use the water to seep2-- 3The strip is a bouquet of the ditch, and the soil is covered on it1Centimeter, line spacing20Cm, spray water every day in the future1Second, after the new bud is unearthed, spray water.

Sprinkle: first pour the ground through the water through the water, seep the water, and then sprinkle the cut stems on the soil surface and cover it up.1Cm thick thin soil.

Four,Roots

This method is suitable for plants without stems and most of the grass species, such as sheep -bearded grass, velvet, etc.Time is best in early spring or rainy season.Shake off the soil after placing the root of the densely dense place, remove the weeds, cut off part of the whisker, so as to2-- 3The seedlings are a pinch, tear it open, and then planted or planted according to a certain plant distance.Follow the soil, cover the thickness of the soil2It is advisable to be about centimeters.Gently compacted after covering the soil, and fully irrigated.Before the new leaf germination, spray water every day1-- 2Second, to prevent the soil plate and crack.

Under normal circumstances, the method of planting turf is simple and easy to save funds.

What is the planting step of Artificial lawn

Step 1: finely neatly

The lawn has high requirements for soil conditions, and the land is required to be very flat before laying.

1Filling back to the soil is full and slightly higher than the design elevation. Generally, the height difference is3~5Within centimeters.

2, clean up the venue30cmAll small stones and other objects within the depth.

3If the grass design with terrain, be sure to ensure Smooth and full terrain.

Step 2: Soil improvement (sand spreads)

1, Sprinkle suction and humus soil, river sand, etc. to improve the soil

2, Roll the soil behind the river and sand with the wooden strips

In order to ensure the follow -up growth of the lawn, you can also sprinkle some compound Fertilizers appropriately. At the same time, the bottom Fertilizer should be applied to the entire land. Conditional regions can be applied to rotten Organic fertilizer, and chemical Fertilizers can be used.5Grace, potassium chlorine5gram

Step 3: Lawstins

1Before planting, the soil layer will be flattened

2When planting, it should be used to keep the lines, keep the lawn's flat, tidy, and uniform

Note that there are no gaps in the garbri babes. Generally, the specifications that are best selected are300*300mm

Step 4: crushing

1Generally, three crushing is required to ensure that the sand soil layer is fully contact with the turf

2There are many ways to crush: If the area of the turf is large, the drum can be used. If the area is average, it can make a roller, and the manpower can be pulled.If it is sporadic grassland, you can make the workers try hard with iron.

Step 5: Watering

1If there are large grasslands such as parks and golf grasslands, the automatic spray irrigation system is generally installed. Just open it immediately after the grass laid laid laid.

2If artificially irrigation, be sure to pay attention to the first watering, and consider the settlement of the soil, sand, and turf with sand.

Step 6: Daily Pruning

Generally, the grasslands just paved do not need to be grass, because after crushing and watering, the grass is tight.Need to pass10Began to get grass around the sky.If you encounter sporadic weeds, you need to clean up in time.

Step 7: Makes insulation measures

In winter to promote the germination of the lawn, the lawn can be used to keep the lawn with non -woven fabric (breathable insulation).The film is used to keep the insulation without good breathability, and it should be removed regularly.

How to plant a beautiful lawn for lawn seeds

First, clean up all weeds in the planting area, previous grass, and other debris.

The chemical treatment method is: spray glyphosate to kill all plants in the area (if necessary).These toxins (glyphosate) may have a long -lasting effect on the soil.Properly flip the soil, so that the soil and weeds can be loose, which is conducive to collecting these weeds.If you have time, you can let the land idle for a week and water the land appropriately.This is a good way, because after this time, the weeds under the ground unearthed, so that you can remove them before planting the lawn.

Second, let the soil fully contact the air and soften it.

You can use hoe, plow or shovel to turn the soil. What tools are used depending on the size of the land.Before planting the lawn, you can pile up the soil (so that the soil can be improved).

three,Since the weeds on this land have been cleared and the soil has been turned over, the next thing to do is to make appropriate grades.

This can ensure that there is a certain small slope between the lawn and the infrastructure of the house, at least every10foot(3Mi) Reserve1inch(2.5The height of cm).

Fourth, when turning the soil, a large amount of weed seeds will be turned to the surface of the soil, and these seeds will germinate and compete with the newly planted grass.

Watering the soil before sowing (weekly1-2Times), and then spray the pesticide again, remove all weeds, so that no other plants will compete with new grass.

Fifth, apply small seedlings and sprinkle lime.

Fertilize the grass according to the guidance (control ratio) on the Fertilizer packaging.It may be a good way to use the Fertilizer, because it can ensure the accuracy of fertilization.Lime is prepared for acidic soil (acidic soil is widely distributed in the northeast region).Especially when there is an evergreen tree or shrub in the planting area, you can conclude that these soils are acidic soil.If you really want to determine the nature of the soil, you can get the soil sample to the local cooperative office to test it.If you have improved the soil and the soil is good, then you don't need to sprinkle import Fertilizer.

6. Type the soil as much as possible.

planting lawns on soft soil is not a good idea.You can use hand ramming or other things to rectify the soil. What tools are used depends on the size of the land area.If you fall down a lot of soil, then you are better to layered them and fight them.actually,13-15The soil with deep centimeters is not thick.If you want your lawn to grow all year round, then you must pay attention to these things.When rammed soil, using water rollers is not a good way. If necessary, it is best to use the rammer.

Seven, the surface of the land needs to be rough.

Use the dumplings to make the soil surface slightly rough.You need to leave some gaps to take root.

Eight, sowing.

Use an appropriate seeding machine and sow according to the proposed proportion prompting on the seed packaging bag.It's not good to sow too many seedsThe this will not make the lawn grow faster. On the contrary, this will cause the lawn to be crowded, which will cause the grass to suffocate and die.

Nine, make sure the seeds and soil are fully contact.

At this time, you can use water rollers to stuff the seeds into the hole (loose place) of the soil surface.Or, you can also use garden .Don't worry that most seeds will be exposed to the air because it is a good thing.

Ten, sprinkle peat soil or Fertilizer.

The peat soil or Fertilizer can be used as the protective layer of the seeds, and the other is to be used as a cover.If you want to spread a thin layer of coverage for the seeds, then use some container to make these things.You only need to bury the seeds into the soil until you can't see them.Too much peat soil will not hurt the seeds, but this is a waste.You only need to sprinkle a thin layer (until you can't see the soil).This step is very time -consuming, but this is very important.The coverage can play an important role in maintaining soil moisture. Do not water all the times a day (if you are lucky, you can once a day).If you don't buy toxic Fertilizers, fertilization can improve the soil, so that the soil becomes fertile.

Eleven, watering.

When watering for the first time, be sure to pour it thoroughly (ensuring that each area can be poured), which is very important.But don't pour too much water (don't make the floods).You have to water constantly, a small amount.After dampness (contact with water), the peat soil will show dark brown.The most important thing is not to leave any stagnant water.At the same time, the peat soil and soil must be fully absorbed, that is, at the beginning, you have to pour sufficient water.

12. Make sure to keep watering in the planting area.

Another advantage of peat soil is that through the color changes of peat soil, you can easily know when you need to water.When the peat soil becomes dry, its color will become light brown again, so you can knowIt is water.After watering, the peat soil will become wet, and its color will become dark brown.Ideally, the color of peat soil should always be dark brown (in other words, peat soil is wet).But the more practical approach is to pour water once before going to work, and then pour the water once after going home from get off work.If the peat soil does not dry, then you don't have to rush to water!Anyway, the color of peat soil is the signal indicator of watering.

13. Don't postpone the time of pruning the lawn for the first time.

The delayed trimming lawn will cause greater damage to the lawn.Once the new lawn reaches a trimming height or slightly exceeds this height, then you have to perform the first pruning.Generally speaking, the trimming height is probably6arrive8inch(15-20centimeter).Perhaps, when the first trimming time comes, your lawn still looks fragile.But the appearance is deceived.Just start your grass cutting machine on the lawn, don't worry about it crushing your lawn, because the grass is very flexible!If you let the lawn grow too long, then when you trim, they will be pressed down, and then the grass is cut off.So don't be afraid, as long as the grass is long enough, you have to risk cutting it off.

How to jump on the platform to Ski

1. slide

Slip is to form a faster initial speed at the jump end to extend the flight distance in the air.When entering the tilt of the sliding road, the Ski players should be squat as much as possible, and the upper body is tilted into a streamlined posture, and it is necessary to roughly parallel with the Ski field to minimize the air resistance.

2. Take off

What is the jumping method of skiing?Take off is the key to the entire platform skiing project. The quality of the starting movement determines the athlete's performance.Because the fastest speed of the slide can reach more than 30 meters per second, the best time to master jumping is the main standard for measuring the level of the athletes.The method of taking off the jumping force is different from the high or long jump. To be precise, it is not a jump but a movement of two legs.Athletes quickly slipped along the sliding road. Generally, when the tip of the snowboard reached the ends of the table, the upper body stretched forward.

3. Flying in the air

Athletes can only achieve their ideal results only by maintaining bold, calm, stable and good at controlling the snowboard air. At this time, the athlete's upper body should be fully stretched, the upper body and the lower limbs are slightly twisted, the two snowboard parallel and the same as they are with the lower limbs.The soles of the feet are on the sharp corner, the upper body and the snowboard are basically parallel, and the arms are sticked straight on both sides of the body.

4, landing

After skating, jumping, and air flight, and finally completing the correct successful landing action, the whole set of movements are consistent. In one go, Ski players can get high scores.When landing, it should be elastic and stable. Both feet are separated from the bow and arrow steps, and the body weight falls on both feet.Body balance.After landing, keep a balanced posture smoothly to the ending area, and all movements are completed.

What are the platforms for skiing competitions

1. Ordinary Taiwanese men's single

Starting from the qualification competition, the top 15 players in the ski resort do not need to participate in the qualification competition and advance to the final.The remaining players must compete for 35 finals in the qualification competition.There are two jumps in the finals. The first 50 people participated in the first jump. The best 35 people participated in the second jump.The order of the second jump is carried out from low to high according to the first jump.

2. Men's single person

What are the competitions for skiing?The rules of the Men's single -player competition are the same as ordinary Taiwanese men, but it is carried out on the big stage.Most of the Ski World Cups are carried out on the large stage. Only one or two stations in a season are carried out on ordinary platforms.

3. Men's group

In this game, each team has four players.The game is divided into two rounds. In the first round, each team jumped one person first, and then each team jumped the second person, and then the third person in each team, the fourth person.The four players of each team have a total score of scores.Only the top eight teams can participate in the second round. The order of the second round of the game is the same as that of single -player games. According to low to high according to the performance of skiing, the team with the highest total score in the end win.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[bamboo vine furniture] How to maintain the advantages and disadvantages of bamboo vine furniture

bamboo and rattan furniture is one of the oldest furniture varieties in the world. The production is very sophisticated. It needs to be painted by light, light oil, and even paint color, making the finished product look firm and durable.What are the advantages and disadvantages of bamboo rattan furniture?Let's understand the advantages and disadvantages of bamboo and vine furniture as well as the maintenance skills of bamboo and vine furniture with Xiaobian!

1. Advantages of bamboo rattan furniture

1. The bamboo in bamboo and vine furniture has its unique natural pattern. The texture is clearly visible. It can always give people a rustic and elegant and fresh.

2. bamboo and vine furniture also knows the function of absorbing ultraviolet rays by few people, making the eyes more comfortable and preventing myopia.bamboo also has sound insulation effects to make the home more peaceful.

3. bamboo rattan furniture has no chemical pollution, pure environmentally friendly furniture, strong heat absorption ability, and maintains the natural green of bamboo.bamboo and vine furniture maintains the unique texture of bamboo.bamboo and vine furniture uses special glue, environmentally friendly green, and will not be harmful to the human body.

4. bamboo furniture adopts natural bamboo. It is a natural environmental protection of bamboo furniture made of bamboo furniture made of bamboo furniture.

5. bamboo and vine furniture has the effects of moisture absorption, natural breathable, and soothing.If you use vine -made furniture as many as possible in the bedroom in summer, it will be of great benefit to summer avoidance and sleep.bamboo vine furniture is warm in winter and cool in summer, and it is why consumers are rushing.

6. The design of bamboo and vine furniture is biased towards classical styles and most of them are frame structures. The assembly structure is added on the basis of the frame structure. Therefore, the framework is the skeleton of vine furniture.The framework of bamboo and vine furniture simply presents the appearance of the furniture, and it also simply expresses the force part. The reasonable or not of the frame structure directly affects the beauty, stability and strength of the furniture.The rationalization of bamboo rattan furniture is also one of the highlights of bamboo rattan furniture.

2. Disadvantages of bamboo and rattan furniture

bamboo and rattan furniture can effectively prevent insects and mildew and mildew.Although there are many advantages of bamboo furniture, bamboo furniture in the market still does not respond well.As a result, this reaction is derived from people's misunderstandings about current bamboo furniture. Consumers generally believe that bamboo furniture has not been treated with any anticorrosiveness, anti -mothing, etc., and it is prone to mothing and cracking.

Third, bamboo rattan furniture maintenance skills

1. Salt and pollution and elasticity

If the bamboo vine furniture has been used for a long time, it is best to scrub it with salt water.

2. Pay attention to insects

bamboo and vine furniture is easy to grow insects. Pay attention to insects.Worm -proof and insecticidal can be soaked with 0.5%to 3%bleaching powder solution.Spray mosquito -killing agents with commercially available mosquitoes and sprinkle insects with boiling water.bamboo furniture can also expose insects in the sun.After treatment, apply a layer of paint inside and outside the bamboo and rattan furniture, and apply it again every 2 to 3 years.

3. Pay attention to deformation

bamboo and vine furniture can adsorb a certain amount of water, but if you adsorb excessive water, it will become soft, the structure is loose, and the plane is drooping.Therefore, when bamboo and vine furniture is moist, be careful not to let its weaving shapes look sampled, so that after drying, it will shrink to its original size.

4. Brush the dust and go to dirt

clean vine furniture is not troublesome, and you can cultivate your body slowly.Use a soft brush of the hair to remove the dust from the inside to the outside.If the stain is too heavy, it can be erased with a detergent. Vegetable oil and soap are the best cleaner for cleaning rattan furniture.Finally wipe it again.If it is a white vine chair, you need to apply a little vinegar to neutralize the detergent to prevent color degeneration.Dip the sulfur with a brush with a brush and brush the vine chair, and you can also remove the dirt.

5. Relax should be processed immediately

When the bamboo and vine furniture finds that there are loose and cracking, it is necessary to immediately be tied to the connection to make the falling parts recover in time. Otherwise, it will be loosened and cracking with other places. The chair will be scrapped after being tied up and it is best to apply a layer of paint.

6. Prevent heating

bamboo rattan furniture furniture is most avoided next to the heating. The bonding site will be dry and weakened due to heating. Do not place it next to the heating pipe to avoid deformation due to heating.Avoid direct sunlight to prevent the fading and drying of the vine material.In addition, high -temperature hair dryers, electric iron, etc. should also be avoided directly on top.