1. color steel topSunshine
Advantages: The insulation and thermal insulation of color steel plates are better.
Disadvantages: The color steel plate is not transmitted, and the color tone is single.
The Sunshine room of steel and aluminum structure is mainly due to the large sun room abroad. Due to the high strength of the steel and the convenient welding, the steel frame and aluminum welded strip is used.Build a large sun room.In China, because the sun room is a new thing, and the price is higher, in order to reduce costs, steel aluminum composite is (Sunshine house with steel bun aluminum)., Make the sun room durable and more beautiful.
2. Tensor glass top
Advantages: The best permeability is the glass top sun room.
Disadvantages: The permeability of glass is not good for insulation and insulation.
The glass Sunshine room is the skeleton material using high -strength carbon steel welding, strong structure, and introducing advanced foreign spraying technology to keep the paint surface as new and never rust.The glass sun roof provides various special glass roofs such as tempered, glue, and hollow.The surroundings are made of plastic steel, broken bridge aluminum, glass curtain wall and other materials.The cost is 480 yuan/Square meter.Through thermal treatment process, the glass has good mechanical properties. The glass products that have crushed fragments have achieved safety requirements are called tempered glass.glass is a crispy material, which is characterized by large pressure resistance and small resistance, so it is easy to break.The fragments have sharp blade, which can cut the Skin, stab the human body, and cause bleeding accidents.
3. Broken Bridge Aluminum Sunshine room
Advantages: Fill in hollow glass fiber reinforcement in the middle of the skeleton with broken bridge aluminum, good permeability, good thermal insulation.
Disadvantages: higher cost.
The design of the broken bridge aluminum sun room is also very distinctive on the hollow section of the heating aluminum profile components.Use the hollow of aluminum profiles to connect the wind sensor, rainwater sensor and temperature sensor with the external electric sunroof system with the EIB bus technology.The sprout is integrated into one, and automatically opens and close according to the internal and external environment of the sun room to achieve real intelligent control of the real sun room.
4. Degao tile top sun room
Advantages: There are five layers of top insulation, good thermal insulation, good color, and diverse appearance and beautiful appearance.
Disadvantages: The color light is not good enough, and the price is relatively high; it can be designed at the top of the sunroof and tall windows around to help the lighting and ventilation.
There are five layers of Degao -tile Sunshine room: the first layer is Da Gaowi, the second layer is a waterproof layer, the third layer is cement board, the fourth layer is a large core board, the fifth layer is a sauna board; DegaoThe tile Sunshine room is made of plastic steel, broken bridge aluminum, glass curtain wall and other materials.The German Sunshine room is novel in shape, design gorgeous, and constructs safely.
First, let's take a look at the main structure of the sun room.The main structure of the sun room is the vitality of the sun room, which is supported by the greatest power. Therefore, the main structure material cannot be ignored.Generally speaking, the main structure of the Sunshine room should be selected as a load -bearing main material.The main structure of the sun room is divided into Steel Structure Sunshine room, aluminum structure Sunshine room, steel and aluminum structure Sunshine room, and wood structure sun room.
1. Aluminum Square Tube assembly constructing Sunshine room
Usually use aluminum alloy tubes to stitch through rivets or screws, which are poor in terms of strength and wind resistance. Taste long -term movement and static loads will deform, which brings danger to the safety, application and appearance of the sun room.It is used on three sides and small spaces with small area. Large space and independent structures are usually not recommended.
2. Pure Steel Structure Sunshine room
Due to the strong welding function of steel and high strength, it can be planned into a different appearance.In terms of wind pressure and strength, the function is superior, the quotation is moderate, the fluorocarbon paint beautifies, it can create a different appearance, the appropriate space is very different, and the cost of protection is high in the later period.
3. Steel aluminum structure Sunshine room
For the progress of the aesthetic request and the need for protection convenience in the later period, the outer bread aluminum alloy on the basis of the Steel Structure, on the basis of ensuring strength and wind resistance, the appearance and color are five colors due to the use of aluminum alloy, aluminum alloy, aluminum alloyIt can be sprayed with a variety of colors, and it can also be made into wood grain. The aluminum alloy outer jewelry is beautiful and easy to protect. The price is moderate. The foundation of the sun room lies in a strong constructive connection. The Steel Structure plays the primary supporting role.You do nt have to worry about the intensity of the intensity of aluminum alloy raw materials. It can be planned into a variety of appearances. The constructed Sunshine room has been welcomed and used widely.
4. The curtain wall structure Sunshine room
Use the special information of the curtain wall with more than 3mm to create a sun room, the standardized interface and connection method brief introduction
Line circulation and appearance are atmospheric, but the cost is high.
5. Pure wood constructed sun room
The imported well -imported anticorrosive wood is used to create a sun room. The pastoral scenery is close to the eyes, giving people warm and close to nature, but the cost is higher than that of other sun rooms.
The skeleton material of the sun room is welded with high -intensity carbon steel, colorful aluminum -type outer decoration, strong structure, Earthquake resistance and wind and wind.If the glass is used as the top surface material of the sun room, it is best to use a tape glass (safety consideration), and you can also make the tape to dual steel or the top of the top, so that the strength of the glass is better.
Sunshine Roof Material
Since it is a sun room, the panel materials are more transparent in accordance with the needs of the Sunshine room. The best transparency in the existing materials is glass, followed by polycarbonate board. The impact resistance of polycarbonate board is better than glass, Thermal insulation performance is better than glass, but it will turn yellow over time.
The glass roof of the sun room has tempered glass, home glue glass, hollow glass, etc., insulation, heat insulation, and anti -ultraviolet rays.Novel and safe, beautiful and generous.Dual waterproof structure, the curtain wall node process can be kept confidential without leakage.
Of course, you can also use the sunboard to cover the top. The transparency of the sunboard is second only to the glass transmission performance. Its quality is light, and the top surface bearing capacity of the sun room does not need to be considered. The disadvantage is that the sunboard is prone to damage and aging.
If you do not completely consider the light transmission at the top, you can also choose the color steel plate as the top surface material of the sun room.The top surface is generally selected to resist corrugated color steel plates. It has good pressure resistance. It uses the sun room with color steel plates. Several people walk on the top surface. There is no problem at all.
You can choose plastic steel doors and window profiles, broken bridge aluminum doors and window profiles, or color steel wall boards.The surrounding glass can be selected from the ordinary, combined with plastic steel profiles or broken bridge aluminum profiles as skeleton. If it spans greater than 3 meters, the steel pipe can be appropriately added as a column support. The surface is fluoride carbon paint, and the structure stability is better than aluminum alloy.Keep in mind: To open the windows that can flow outside the sun room, you must breathe in the inside.
The surrounding glass can be selected from the ordinary, combined with plastic steel profile or broken bridge aluminum profile as the skeleton, and the span is greater than 3 meters. It can be appropriately added as a supporting steel pipe support. The surface is fluoric carbon paint. The structure stability is better than aluminum alloy.The data has different advantages in sound insulation, energy saving, strength, and quotation. The most suitable doors and windows and supporting hardware system are selected according to the needs.The door and window glass usually uses hollow glass to improve thermal insulation and sound insulation function.In addition, the sun room can also be equipped with electric or manual intelligent sunroof to add the top of the ventilation function of the Sunshine room. It can be equipped with a Shading system with different ways to open and different data.
1. Drachi
Is there a material that can be whatever and infinitely changing, satisfy the childlikeness of our graffiti, and it must be environmentally friendly and easy to operate? These performances can be available.The ground color is a bit like paint, which can be mixed out of infinite possibilities, but more abrasion than paint; it is a bit like cement, but it is easier to operate than cement.There will be no gaps, and harmful bacteria and dust mites will be hidden in nowhere, so environmental protection is more alternative than traditional materials.
2. glass
Each time I step on the glass or glass staircases that are flowing and raised in the hotel, the subconscious is always careful. I am afraid of stepping on the glass because of the excessive force.In fact, these concerns are a bit extra. The glass that can be used on the ground is no problem at all.This kind of glass aisle or the ground, enabling the light to drive straight into, the crystal clear and sunny home environment glass contributed.
3. Mosaic
Mosaic is a premium material, but due to the various problems in terms of quality, many people end up in failure when the ground is paved with mosaic paving.With the development of technology and craftsmanship, mosaics have now changed dramatically in terms of materials and color.The mosaic can well solve the problem of color and art decoration in the decoration process. It can have a large area of solid color, mixed color, puzzle, so that the ground can have the color you want, and even the effect of murals.
4, small stone
A rough look, this is an ordinary Sunshine room, but carefully figured it out and found that the plants of this sun room were planted on the "ground"! Call away the small stones on the ground. Below is the soil.Go down.Because this is not paved with any floor and floor tiles, the ground is a Smooth layer of small stones, so this sun room can even plant trees! There will be no stingy potted plants, and it is only necessary to pour it on the ground if you water it.
1. Seal glass pressure plate
The top of the Sunshine room is highly sealing glass pressure plate. Good sealing guarantees the tightness between the glass and the profile, and the water leakage is prevented.
2. waterproof rubber strip
Aviation -grade Sanyuan ethylene tape has good waterproof performance.
3. Direct tank
The surface of the sun room profile increases the design to prevent "condensed water".
4. Drainage sink baffle
Prevent rainwater from splashing the sun room profile, have a better waterproof effect to achieve secondary waterproof.
1. Candid -top waterproof
waterproof method 1:
Step 1: After installing the sun room;
Step 2: Take 100mm of glass from the glass surface to make the highest point of the tile top and then fold 300mm to make SBS waterproof.
Advantages: 100%without leakage;
Disadvantages: The color of the original roof is changed, and waterproof (waterproof aging) should be re -water for 3 to 5 years.
waterproof method 2:
Step 1: Unveiled a tile from the side of the sun in the sun;
Step 2: Gently kill the mortar layer under the tile. Be careful not to damage the waterproof underwater under the mortar. Special attention should be paid to the construction, and the original waterproof is not less than 200mm wide.
Step 3: From the glass surface (100mm with the glass), the waterproof layer of the tile top is used to put the width of more than 200mm for SBS waterproof (Note: Waterproof material grilled with fire).
Step 4: Try the water from the top of the tile. If you find the water leakage point, repair the water, then try the water until the mortar layer will be supplemented until the mortar layer does not leak.,,
Advantages: restore the color of the original roof;
Disadvantages: difficulty in construction, high cost
2. Drain the wall on both sides
Step 1: Install the glass of sunshine under the sun room frame and waterproof tank;
Step 2: Fold the folded waterproof plate (aluminum alloy or stainless steel plate), and fix it on the wall with a plastic bloating Tube at the highest point of the waterproof plate at the wall (inject glue in the screw hole before fixing)The glue of the wall and waterproof plate should be well hit. The sun -resistant sunrise house is fixed on the secondary beam. The glass is pressed on the waterproof board. When the waterproof board is not long enough, it will be connected.Leakage of water, pay special attention to construction, and completely find the original waterproof of no less than 200mm wide.
Step 3: Try the water from the top of the water.
Note: There will be water leakage in the marble wall. Check whether there is water leakage before installing the sun room.
Advantages: design styles many styles;
Disadvantages: The construction is difficult, the cost is high, and the waterproof plate is prone to leakage, and it must be maintained once a year.
3. Dao Gao tile top waterproof
De Gao Ding waterproof Construction Plan
Leakage point 1:
The nail head of the waterproof wood surface is exposed to spines the SBS waterproof layer and causes water leakage;
Solution:
When a fixed waterproof wooden board, use a 10mm drill bit to lead the horn mouth to sink the screw head or cover a small piece of SBS waterproof on the fixed screw head, and then water the waterproof;
Leakage point 2:
There are interfaces in the sink, and there is no sealing at the side beam that causes water sink water to enter the facade doors and windows to leak water;
Solution:
The sink opposite the interface, especially the beams in the back of the beams, to play well;
Leakage point 3:
waterproof waterproofing in the water sink and the top surface is not sealed, resulting in water from the phenyl board on the sink after the water is full, causing the water leakage in the front of the high top of the German high;
Solution:
Use the L aluminum alloy plate to fix 15 mm in the side beam, seal it with glue, rely on aluminum alloy plates, solid wood plate, benzene plate, waterproof board, and stick SBS waterproof and aluminum alloy baffle to seal them.The interface of the board must be sealed.Block the water outlet under the water tank and test the water.Put asphalt tiles after not leaking.
Leakage point 4:
The poor sealing of the German -top and the outer edge causes water leakage on the side window of the side.
Solution:
Put the benzene board to the inside side of the outer decoration, and the edge of the outer jewelry and the benzene plate are directly soaked and filled. The waterproof plate is paved to the inner side of the outer decoration.Good SBS waterproof, seal with glue between SBS waterproof and outer jewelry, lay asphalt tiles after testing water.
Install precautions:
After the insulation is installed, the waterproof plate is laid on the top. The surrounding and main beams must be fixed to the screws. The bamboo plywood should be flattened without leaving a gap. Fill all gaps with glue to make the first waterproof.
When the waterproof waterproof, the paving from the lowest point, the paving from the bottom up, the latter layer should press the front layer 50mm.When you go to the wall, first play the glue, about 80mm on the wall, and the roof window in the middle should first spread the waterproof on the wooden board of the roof window.
4. waterproof water preservation wall waterproof
Wall -wall waterproof construction plan:
Step 1: The glass roof is cut off at 25cm from the bottom of the beam (32cm to the bottom of the bottom beam of Degao), and the following parts are removed.
Step 2: Use the cutting machine to slot at 50mm (the physical wall inside), 2 cm wide, 2 cm deep, and do SBS waterproof in the groove, then insert a waterproof board in the upper part, use the upper part of the waterproof plate to use it to be resistant to weather.Plastic treatment.Try the water, make sure that the next step is not leaked before the next construction;
Step 3: Install the "San San Water Plate" and do a glue sealing.
Note: If the glass top of the glass top to the thermal insulation layer is used to block the warm -ups in the sun room to block the thermal insulation.The insulation layer is leaking
Advantages: Improve waterproof performance;
5. waterproof waterproof wall waterproof
waterproof waterproof construction plan for insulation coatings:
Step 1: The coating layer at the coating layer of the glass top from the bottom of the beam to 25cm (32cm to the bottom of the bottom beam of Degao) is polished;
Step 2: Use a cutting machine to slot at 50mm up to the upper glass surface (Degao Ding), 2 cm wide, 2 cm deep, do SBS waterproof in the groove, then insert a waterproof board in the upper part.Plastic treatment.Try the water, make sure that the next step is not leaked before construction;
Step 3: Install the "San San Water Plate" and do a glue sealing.
Note: If you are a cultural stone wall, you have to kill the stone.
Reasons for leakage in the sun room
1. Framework construction is not strong
Some irregular sun room production companies cut corners and use non -national standard iron or aluminum pipes. The strength is not enough. The overall frame of the long sun room is deformed, causing the glue to crack and leak water.The sun room is different from the doors and windows, and it is formed by the overall frame structure. If the framework is not firmly affects the service life of the Sunshine room, the top of the sun room is generally glass.As a result, the Sunshine room is slightly deformed.
Therefore, the material selection of the sun room is very important. Don't be cheap. I would rather spend a little more money to use a better framework material, pay attention to the quality of construction, and carefully build the acceptance.
2. The construction of the wall is not fit
Most sunshine rooms are built on the wall. Some are facing walls, and there are many walls, so that it is very easy to leak water at the connection between the wall and the glass.
There are also some walls that have inner lining thermal insulation materials. When making shelves, if the ingredients are not close to the wall, the waterproof is not good, it can easily cause the sun room to "have ten omissions in ten."
Suggestions: After the framework of the sun room is completed, if there is a place to connect with the wall, it is necessary to remove the paint on the original wall, so that the glue and the wall can be firmly connected.It is best to slot on the wall over the covering material after glue, and install the raindrop plate to ensure that the double -layer waterproof is not leaked.
3. waterproof glue failure produces cracks
The brush layer on the wall was exposed to the sun, and the coatings gradually shed and loosened. The gel seams that previously hit the wall and glass connection slowly peel and fall off, and the cracks caused water leakage.The Sunshine room has played a very important role in waterproof waterproof. The overwriting of the top of the sun room frame is connected to the seam.The effect is very poor. It can't help soaking and sunlight of the sun or rain. After a long time, it is prone to aging and cause the sun room.
4. The glass glue used in the sun room is not selected, or it is not hit well
The Sunshine room is composed of frames and hollow glass, broken bridges, aluminum doors and windows. The filling between the between it is glass glue, as well as the brushing layer on the wall under the sun exposure.The glue joints at the glass connection slowly peel and fall off, and finally the cracks caused water leakage.Therefore, the Sunshine room plays a very important role in waterproof. The seams are connected between the top cover of the sun room frame, and the facade doors and windows and frameworks depend on the waterproof treatment of silicone gum.
If the silicone glue used in the sun room is not strong and the quality is poor, the waterproof effect is very poor. It can't help soaking the sun or rainwater.There are many types of adhesives for decoration, including Sunshine room -specific silicone seals, neutral silicone sealant, etc. The quality of the glue is very different.
In order to save money with inferior glue, some people have been cold and hot after the weather, and the natural cracking of the glue is also one of the important reasons for the leakage of the sun room.Infinitive and unqualified materials flow into the market, and they cannot withstand the test of bad weather and heavy objects.
The top of the Sunshine room is generally used in structural glue and weather resistance. In the gap between the top covering, first hit a layer of structural glue, and the fullness is about two -thirds of the gap, and then attached to the Issuance of Time -to -weather glue.Essence
The reason is that the structural glue is highly connected, which can firmly connect the frame and coverage, while the weather resistance and anti -corrosion capacity are strong, and can experience the sun exposure of rain and sun.Remember, do not use ordinary doors and windows and silicone as a top waterproof.
What to do if the sun room leaks water
1. After the framework of the sun room is completed, if there is a place to connect with the wall, you must remove the paint on the original wall, so that the glue and the wall can be firmly connected.Otherwise, after a long time, the coatings of the wall will be pulled off after dried and contracted, causing leakage. This is the most important reason for the leakage of the sun room.It is best to slot on the wall over the covering material after glue, and install the raindrop plate to ensure that the double -layer waterproof is not leaked.
2. The glue in the sun room is also particular about the use of glue.The top of the Sunshine room is generally structural glue and weather resistance. In the gap between the top covering, first hit a layer of structural glue, and the fullness is about two -thirds of the gap, and then attach a heaven -resistant glue for the reason for the reason for the reason.It is a high degree of structural glue connection, which can make the frame and coverage firmly connect together, while the weather resistance and corrosion resistance can be used to go through the sun exposure of rain and the sun.
Between the doors and windows and the frame, it is best to leave a gap of 3-5mm, so that the glue can be glued into the gap between the doors and windows and the frame. This structure is stronger and the waterproof effect is better.On the surface, the time of time will fall off naturally.
3. The sun room room is different from the doors and windows, and it is formed by the overall frame structure. If the framework is not firmly affects the service life of the Sunshine room, the top of the sun room is generally glass.It will cause the sun room to deform slightly as a whole. Therefore, it is recommended that customers not be greedy for cheap, and prefer to spend a little more money to use a better framework material.
4. There are many transparent materials in the sun room, which is also a necessary ingredient for the light transmission of sun room. Now there are tempered glass, tape glass, endurance board, and sunny plate (hollow plate) on the market.The advantages and disadvantages of light transmission materials are different.
5. To do a good job of leaking the sun room, the selection of waterproof glue is important.Generally, the top surface of the sun room color steel plate is specially used in color steel tiles. If it is a glass cover, there are more weather -resistant glue.
1. Install the sun.After the construction of the sun room is completed, a sunny curtain can be installed on the top of the sun room, also known as the ceiling curtain.At present, there are many types of ceiling curtains on the market and different materials. They are mainly divided into two types of automatic and manual. They can combine the actual reality of the sun room and choose the appropriate ceiling curtain.When the ceiling curtain is opened when the sun is fierce, it can effectively resist the direct shot of the sun and avoid direct sunlight to produce high temperature.
2. Put the glass thermal insulation film.Because the insulation film has a deep color reflective substance on the surface, it can reflect the sunlight to achieve the heat insulation effect.Putting the thermal insulation film on the glass can improve the ability of the glass, reduce the permeability of the glass, reflect the sunlight, and achieve the heat insulation function.
3. Install air conditioning equipment.The main function of the sun room is to enjoy the sun and get close to nature, but when the temperature of the sun room is too high, people will feel uncomfortable in it.Therefore, you can choose to install air -conditioning equipment in the sun room, and use the air conditioning equipment to achieve the purpose of reducing the temperature of the sun room.However, the temperature of the sun room through the air conditioner equipment is best to avoid the sunlight, it is best to enjoy the coolness brought by the air conditioner, but also look at the setting sun.
4. Properly open a sunroof.When building a sun room, you can reserve a daily window that can be moved on the roof. Conditions, large sun rooms, can also open some windows around.When the sunlight is exposed to the heat of the sunlight, the hot air can be dispersed by opening the daylights and windows, thereby reducing the temperature in the sun room.
5. Use low -radiated coating glass to build a sun room.Before building a sun room, you can directly select some construction materials with insulation function, such as using low -radiation coating glass.This glass is directly applied to a layer of film, which can directly reflect the sunlight and ensure the indoor lighting.
Do you have a glass house?
The reason why the Sunshine house is made of glass top: I feel that the sun room is not a normal house. In order to save budgets, all glass choose ordinary tempered glass. The temperature changes cause the glass to explode, and even the injury incident, which brings unnecessary trouble to life.
Regret the reason why the Sunshine house is made of glass top: In the summer, it becomes a sauna, the temperature is super high, and people cannot move normally inside. The temperature outside is 30 degrees and the temperature inside is 60 degrees.
These two reasons are indeed fatal. Many people say that the sun room does not make glass tops. Use other materials to make top, such as the rise of German tiles now and Building Materials such as lighting boards.Is that still called Sunshine room?It is more solid to make ordinary brick tile houses directly.
The method of solving the sun room is too hot as follows:
1. You have decided to do the sun room. In order to experience a higher quality life experience, it is recommended that you choose the broken bridge aluminum alloy to ensure the maximum temperature difference between indoor and Outdoor.It will shrink and fail, but it is also much slower than the Steel Structure of the Steel Structure. It will not allow you to enjoy the sauna room in summer.
2. 70%of the materials are sunshine rooms formed by glass. What are the most important things?Of course, the glass is reiterated, and the sun room cannot be used with ordinary tempered glass. Unless you just look at it as a furnishings, even if you do nt use LOW-E glass, you need to use hollow glass. In addition to sound insulation, you can also inspirate and you can also heat up and you can also heat insulation and you can also heat up.Insulation.
3. Finally, the sunroof and sunshade of the sun room. You know the Shading of ordinary brick rooms. In addition to getting the sun room, it needs to shade. Don't think that you have installed air conditioning in the sun room.You have no effect on the central air conditioner. Going up, what are the sun rooms used?Of course, it is a sunroof, so the sunroof of the sun and the sunroof is the accessories that cannot be ignored.
Solve the method of self -explosion of the top glass of the sun room:
It's very simple: Don't be small due to small loss in order to save that money. Ordinary tempered glass and double -layer tempered glass are not much worse, and tensile tape glass should be used.It won't fall down. If you are not assured, you can make three layers of steel glass, which is the so -called three -wave two -pinch glass, which can resist the big hail attack, so what else can you worry about.
Plan
Structural composition: The facade uses a single glass steel window (or double -glass -plastic steel window), and the top surface adopts the color aluminum Square Tube frame combined with 8mm tempered glass (or 5 5 clamping glass, 5 5 single -sided tempered glue mile, 5 5 double double double doubleFacial tempered tie glass), the characteristics of the scheme: high strength, long life, economical and practical, suitable for sun room with not large span.
Second
Structural composition: The facade uses colorful aluminum windows (or frameless balcony window), and the top surface adopts carbon steel Square Tube binding 8mm tempered glass (or 5 5 clamping glass, 5 5 single -sided tempered clamping gumPlating glass).Plan features: high strength and long life, but surface treatment, suitable for all kinds of sun room.
Plan three
Structural composition: The bracket adopts stainless steel Square Tube, the facade uses a fixed glass binding frameless balcony window (can also be used in color aluminum windows), and 8mm tempered glass (or 5 5 clamp glass, 5 5 single -sided tempered tape glass glass, 5 5 Double -sided tempered tape glass).Plan features: high strength, long life, economical and practical, but single color, suitable for all kinds of sun room.
Special Mic 
