Articles in Tags Chongtong

On April 1, 2024, the new version of "outdoor sports Clothing charge" was officially implemented (GB-T 32614-2023).Compared with the old standards that have been implemented in 2017, the new national standard of charge has improved the requirements of indexes such as humidity, abrasion resistance, and color fastness, and added or clarified indicators such as safety, color difference, and static water pressure.

In terms of the dampness performance of the charge, the new national standard has improved the requirements: For the level I jacket, the moisture transparency rate is 5000 before washing and the 4000 after washing to the before and after washing. 3000, after washing 20000 increased to 4000 before and after cleaning.In terms of abrasion resistance of charge fabrics, the new national standard has also adjusted the outer material from the old standard upper and lower installation 10000 times to the upper installation 10000 times and the lower installation 15,000 times.The opponent's ability to maintain color after sun exposure, the new national standard increases the light -resistant dark color indicator in half, and increases from level 3 to 3-4.

In order to promote the green and environmental protection of the product, the new standard also added the detection of related fabrics that claim to use fluoride -free finishing products to ensure the safety of the related products.The new standard has increased the requirements for color differences on the problem of "severe coloring after cleaning", and the color difference after washing is 4.In addition, the new standard also stipulates that children's clothing should comply with the requirements of national compulsory standards "Safety and Technical Specifications for Infants and Children's Textile Products", which comprehensively improves the safety of children's products.

Types of skiing clothing

1. Double -board conjoined body: The benefits of traditional Ski clothing are to make the clothes in the snow and design, but the action is not convenient. It has been eliminated. At present, it is almost very small and has been replaced by the division.

2. Double -board split body: It contains cotton or other warm layers, similar to the design of mountain jackets, beautiful styles.

3. Single plate split: Generally, a single -layer design, which increases the warm layer in front, the back layer is breathable, and the clothes are hypertrophy.

4. tights: Special warm layers, the best sweat effects, the competition is dedicated.

Types of assault jackets

1. Ultra -light fashion type: use in the city;

2. Short -distance windy raincoat: Hiking Camping within 2 days;

3. Long -distance heavy jacket: more than 3 days of mountain climbing below 4000 meters or less;

4 or more than 5 days, climbing more than 4000 meters above sea level, and the temperature-20 standard is cold-resistant.

The difference between skiing and jackets

jacketIt is our common name for multifunctional Outdoor coats.It is the standard equipment of each enthusiast of each Outdoor activity, and is the first protective layer on the surface of the body. From the perspective of function and positioning, it can clearly understand its performance from its name: one shows that it uses positioning positioningThe importance of the top shows that it has a powerful function in clothing performance.However, for the majority of primary Outdoor enthusiasts, there are not many people who can really fully understand what is assault clothes.In most cases, everyone is called charge coats with hoodes and fabrics with gel coatings and windy Raincoats with anti -wear Oxford cloth.In fact, there are misunderstandings here. Most Outdoor enthusiasts do not have the superior performance of real functional clothing.Many of these so -called jackets are mostly ski clothes used in double -board Ski sports.Many people are actually not very clear about what functions they use, let alone punching clothes andSkiperThe specific differences between them, although in low -intensity outdoor activities, the requirements for clothing performance do not highlight their differences.

1. Weight

Compared with skiing clothes, the jacket is lighter and simpler.The jackets are taking lightweight lines. The mature use of thermal stickers and the widespread application of a large number of new technical fabrics has reduced the unnecessary weight as a whole.Ski clothing emphasizes the waterproof (wind) and warmth of clothing functions.Therefore, the fabric requirements are relatively high, and more materials will be used to improve these performance indicators, such as thicker lining, more fabric pressure glue coating.Therefore, the appearance of skiing is more complicated and relatively heavy.

2. Wind -resistant face protection

The collar part of the jacket is generally simple to design, and basically uses soft materials to protect the mouth at most.Ski clothing is more complicated. Generally, the wind protection face with windproof face on the hood of the Ski clothing is that the face Skin is frostbite when the Skin is caused by cold wind during the skiing process.

3. Cus and trousers

Simply put, the jacket and pants are simple, skiing and pants are complicated.Strictly speaking, the jacket has only one cuff, which is simple and clear.In order to prevent the irrigation of the cuffs from the cuffs, the Ski clothing is generally more complicated. Some styles are designed in the cuffs into two openings, similar to the style of dew finger gloves.Different, the Ski pants basically have two layers of anti -snow design in the pants mouth, and the Assault pants can be used to solve the requirements of snow and lightweight because it can be used.EssenceJudging from the current products on the market, only the submachine pants used above the snow line have complex pants mouth devices, and the design of popularity and submachine pants used under snow lines is very simple and convenient.

4. Pocket

Based on the simple requirements of the jacket, its pockets are generally very small. Some styles of pocket sealing only use nylon buckle, which is not only simple and convenient, but does not affect the overall weight of the clothing.For Ski suits, you don't need to be so embarrassed, in order to allow skiper to store skiing mirrors, gloves, mobile phones and other personal products.There are many pockets arranged in the Ski suits, and the opening is very large, which is convenient for skiers to use gloves to pick them up. The opening at the opening is basically used to prevent the loss of items during strenuous exercise.It needs to be extraordinary: there are many small pockets for skiing clothes. The materials are soft to store mobile phones and Ski mirrors; the transparent texture is to store Ski time cards.These details are designed by the clothing designer to take into account the actual needs of the user.

5. Heating zipper

Most of the charge clothes are designed with a cooling zipper. It can make users adjust the temperature in the clothing at any time according to the actual use.For high -end jackets, zippers usually use YKK products with waterproof function.Due to the characteristics of skiing, the zipper is generally designed around the chest and the front of the upper limbs.In the same way as the charge, high -end products of skiwear also use waterproof zippers.

6. Wind -proof (snow) skirt

The windproof (snow) skirt is designed to prevent irrigation and the snow from the lower part of the clothing after falling.It is basically a necessary design for Ski suits.However, for the jacket, it is a dispensable design. From the perspective of the lightweight development trend of the jacket, the windproof (snow) skirt must be one of the choices abandoned by the concept of lightweight;Look, I have never used it in outdoor activities.Instead, I feel very cumbersome, not only to increase the weight of clothing, but also has no necessary use value.At present, there is only a structure in the design of the old punch jacket. Therefore, this has become one of the main signs of the difference between two kinds of clothing.

7, wear -resistant layer

Due to the extraordinaryness of skiing, many Ski pants will be designed with thick wear -resistant fabrics on joints or body friction. Although it will cause the overall weight of the clothing, it will extend the clothing life.The Assault pants are different. Generally, except for the pants designed for the harsh conditions (such as the use of mountaineering activities above the snow line), basically only simply wear anti -wear treatment in the easiest damage.The differences between the two in this regard are also based on product design and positioning.

The difference between skiing and down jackets

The difference between down jackets and skiwear is on weight. The down jackets should be lighter, and the weight of the skiwear will be heavier. If you want to experience the light effect, you can choose a down jacket. If you like more casual matchingweight.

It is also more important that many down jackets are mainly innovative in style and color patterns. Due to the limitation of down the fabric, the fabric will be relatively fixed, and the Ski clothing may be better in windproof and waterproof effects.

How to buy Ski suits

tip1: Don't be too tight

When choosing skiing clothes, you must not choose too small or too tight clothing, which will limit the gliding action.For beginners, wearing skiing clothes is convenient than skiing clothes.If there is no skiing suit, a elastic long -cotton knee -clear -woven knees and a wide wrist guard with a pair of scarfs can also prevent snow.

tip2: Avoid all white

From the perspective of color, it is best to choose the eye -catching color that can form a large red, orange, blue, or colorful color matching with white. First, it provides eye -catching signs for other skirs to avoid the occurrence of collision accidents;The second is to add charming charm to this sport. A beautiful and fit professional Ski Service allows you to highlight the beautiful curve of your body when you experience the happy sports of nature.It is best not to wear all white skiwear.

TIP3: Open a large zipper

The opening of the skiwear is dominated by large zippers, so that it can be convenient to operate when wearing gloves.There must be several convenient pockets for skiing clothes to put some commonly used Ski supplies into the door into it for easy use.Because you often need to sort out skiing equipment and hold the snow stick to glide, the ski gloves should be wide, and the five fingers should be separated.The gloves should be long, it is best to cover the cuffs. If there is a loose band, it can effectively prevent the entry of snow.

TIP4: It is best to be a non -cotton system with underwear

When choosing a personal underwear, it is best not to use a cotton product. You can wear a nylon vest with a net eye, and then put a elastic cotton vest on the outside. This way, the sweat excreted from the body will be adsorbed on the elastic vest through the nylon vest.It will not produce a cold feeling.If economic conditions permit, you can also choose a lingerie made of silk materials. It does not absorb water. The outer layer is cotton products. The sweat can be adsorbed on cotton products. The effect is very good.

TIPS5: Ski clothing materials are very important

Because most of the ski resorts in my country are inland, it belongs to cold, dry climate, low temperature, strong wind, and hard snow. Therefore, the outer ingredients of the Ski clothing should be used for tearing, tear -resistant, windproof, and windproof. The surface is windproof. The treated nylon or tear -resistant cloth material is better.Given that most of the ropeways in my country's ski resort are not closed, and the air temperature is low, the inner warm material of the skiwear should be selected from the heating material with better warmth or DuPont cotton in order to Ski people when riding the ropeway for skiper Provide a good heating condition.

[Character fabric] What kind of assault clothing fabric?

Which fabric is good?

Choose the charge fabric

Everyone knows that good charge fabrics can not only reflect the overall design and novel styles, but also fully consider the external environment and occasions wearing.Let s teach you the 5 techniques of the screening and purchase of the fabrics of the jacket:

1. Because the jacket must be completely waterproof, the seam must be used to prevent the pins from leaking with hot pressure strips. Carefully see if the rubber bar in the clothes is flat and whether there is a bubble.The seams of the car are all crushed with waterproof rubber strips, ensuring excellent waterproof characteristics.

2. Whether the hem of the clothes has a windproof skirt or not, if there is no windproof skirt, you can tighten the clothes, and the drawing rope at the hem to prevent the snow from being poured into the body from the hem in a harsh environment.

3. Whether there is a breathable zipper under the armpit of the clothes.Not all assault jackets will have this design. There are ventilated zippers under the armpits, which is very useful in harsh environments or in large amounts of exercise.

4. Whether the tightening method of the cuffs is appropriate?The magic sticker design at the cuffs can be adjusted and loose at will according to different body types.

5. Whether the hat can cover the wind and rain well, whether the activity of the back head is free.If you use activities such as ice climbing and snow mountain climbing, you must also consider the activities after wearing a helmet.It is fully considered that the comfort of the wearer and the convenience during exercise can be removed from the three -dimensional design of the unloading hat and have multiple adjustable functions.

Selection and use of fabrics during the production process -physical properties.

1. Strong scrape: It can produce a stable modeling effect. The stiff fabric has a physical expansion, and it has no extra pleats and accumulation to make clothes. The design of A and H in the design is the most appropriate.To judge the stiffness of the fabric, you can simply put a small piece of fabric on the edge of the table to let it hang down naturally. The jacket made of the fabric in the red line will be more stylish

2. Feeling: It is comfortable to feel. It is not recommended to be too hard and too astringent. Especially the products sold in the mall, the customer's taste of customers consume is high.In terms of feel, nylon fabrics are better than polyester fabrics.Everyone's feel is different. The training feel is to touch more, touch the fabric of the famous factory, and touch the fabric of the first -line charge brand.

3. Anti -wrinkle: Punching sleeves and backs are frequent with tables and chairs, and the fabric is required to have high anti -wrinkle resistance.Rub the fabric samples hard, and then Smooth it. Look at the degree of wrinkles disappearing. The fabrics without wrinkles or a small amount of wrinkles have good anti -wrinkles.In addition, listen to the sound when rubbing, do not have rustling fabrics, because when wearing the clothes made by the fabric, you can hear you from 10 meters away.

4. The relationship between yarn and density: Now the punching clothes are pursuing lightweight, and the fabrics with thin, gauze chips, and high density are required;Wrinkles; good fabrics are mechanical indicators such as the feel, stiffness and anti -wrinkle resistance of the fabric by increasing the number of F numbers as much as possible, appropriately increased the twist, and increase the density.Therefore, when picking the fabric, you must go to the F number and twist data as much as possible.(F is the number of single gauze roots. The larger the single veil, the finer, the better the flexibility of the yarn, the better the feel will feel)

5. Organization/pattern/flower color: Chunya Textiles, Tatson, polyester tower, grid, and diagonal lines are commonly used classic fabrics, flat but enduring; pay attention to use small bistanic fabrics, and make good designs with good taste.Teacher to choose, people have their own good, tastes not representing the candidates of the public, they are easy to fall into the custom, and they will be reduced to street goods by accident.With buds, novel things can be available to attract consumers' attention, but to control the proportion appropriately, Jobs's realm is simplicity.

6. Thick thin: thin spring and summer, thick autumn and winter; don't affect the effect of glue pressure, thickness cannot make the clothes too bulky; the number of scrapers of the waterproof coating has a lot of impact on the thickness of the fabrics;Essence

7. elasticity: Properly use elastic fabrics on the back of the elbow, which can be a gimmick of ergonomics in the whole point, but if you use elastic fabrics for whole clothes, it depends on whether you can sell it.), Especially the fabric with spandex; the mechanical bullet is easy to collapse after washing; the elastic modulus should not be too small (the minimum power of the deformation of the fabric), otherwise it is easy to wrinkle when pressing the glue;Below temperature water

8. color saturation: It is relatively fresh and positive. In contrast, there will be a feeling of bright eyes.The saturation is very related to the hardness of dyes and water quality. Clariant's dye and auxiliary performance is very good. It is specified for some first -line varieties. South Korea and Taiwan's water quality helps color saturation (industry legend).color has great influence on attracting customers into the store and purchasing.If the clothing is combined, pay attention to the water -washing and sticky color of the first and second colors. The polyester materials are easy to stick to each other.

The production process of the jacket

1. Types of coating and film: The feel of the finished fabric is basically a film & gt; wet coating & gt;However, it is not environmentally friendly; 2.5L and 3L fabrics are currently from famous factories, otherwise it is easy to produce quality problems, and the rubber strip is responsible for matching the fabric factory.The problem of water washing rate in the middle and noodles caused the fabric to wrinkle; which test method must be specified in waterproof and breathable parameters, and it is strictly tested. In addition, it is best to do aging testing. Many new domestic in China have a lot of new domestic tests.The imitation coating has cracked turtle after washing the water many times, and the functions are lost.

2. ingredients: Tear and feel nylon are better than polyester. There is a good factory polyester fabric; recently, there are leisure brands with waterproof and breathable trench coats with all cotton tables;Sticky color.

3. The thickness of the yarn branch: In the case of the unchanged D also, the number of F numbers is required to increase the furniture of the fabrics, such as the same thickness wire rope, which will definitely be soft in the fine steel wire inside.

4. After finishing: The surface cloth is easy to dip the dust (especially the black); the natural luster of the chemical fiber is very low, and it should be treated as much as possible;Affect water washing rate, etc.