1. How long does it take to change the fish hook?

The fish hook is a necessity in our fishing, and it is also a consumable. The quality of the fish hook is very poor and the degree of wear is directly related to our fishing. If the fish hook has a serious wear, it is likely to cause the pole to thorn fish.run fish, so you need to change the Fish hooks from time to time, how often do you change the fish hook?

Generally speaking, the fish hook is used as a consumable. Its replacement does not have a fixed frequency, but it is not changed by feeling. Generally, the standard for changing Fish hooks is mainly to pay attention to three points:

1. The degree of bending of the sub -line

The frequency of changing Fish hooks accounts for the majority. Especially when fishing small fish, the sub -wire is bent, and the frequency of changing Fish hooks is very fast.For example: fishing small fish, some small white strips, catfish, crickets and other fish. After eating hooks, they struggled violently after eating, causing the sub -line to bend, or knotted, so that it cannot be used, because it is very troublesome when the sub -line is bent in the bait.EssenceThe fish hook is small and the bait group is also small. The weight of the bait group is lighter. The bait group cannot make the sub -line vertically on the bottom of the water, causing the hook distance to be too large or too small, thereby reducing the rate of fish. At this time, the fish hook is replaced.

For example, the fish hook of fishing and fishing fish is slowed slowly, because the Fish hooks of fishing fish are thicker, the sub -line strength is large, and the line diameter should not be worn and bent.Generally speaking, the fishhook of fishing fish is rarely replaced except cutting lines or Running fish.

Everyone knows that the fish hook replacement frequency is very fast when fishing. It is not the wear of the fish hook, but the curvature of the sub -wire is relatively large, causing the fish hook to be unavailable.When fishing for small fish, it is normal to replace several sub -lines a day. In this case, the fishhook that is replaced can be collected and reused.

2. The frequency of Fish hooks

The frequency of Fish hooks is also a factor that determines whether it is necessary to replace, because we don't know that a fish hook can catch a few fish and how much fish fishing will wear, so although the fish hook is better, it should not be used for a long time for a long time.

During the use of small Fish hooks, pay more attention to the degree of wear of the fish hook, and change it. After the fish hook of fishing, pay attention to whether the fish hook is deformed after the fish hook. It can be used normally without deformation.(After the small hook and the big fish, or after the small hook is caught in the big fish, try to replace it as much as possible.)

3. The degree of Running fish Hanging bottom

It is inevitable that Running fish and bottoming are inevitable when fishing. We can decide whether to change the fish hook based on the degree of Running fish and the bottom: first look at the fish hook after Running fish, even if a little deformation needs to be replaced.Because after the fish hook is slightly deformed, the strength of the fish hook is reduced a lot. If it does not change the hook, maybe a small fish may cause Running fish.

The bottom is a problem that often encountered in fishing. Even in the familiar fishing position, the bottom is very normal.Because when the fish hook is lying on the bottom, it will hang the stones at the bottom of the water, and the miscellaneous things. After the bottom is hung, try to change the fish hook, because the bottom may make the fish hook deformed or the hook tip becomes blunt.

2. How to maintain the line hook for fishing

The line hook for fishing needs to be replaced from time to time, but if you pay attention to maintenance, you can also extend their service life. After all, it still has a certain impact to replace it with the habitual thread hook.The maintenance of the maintenance of the fishing hook:

1. After the fish hook is used, remove the bait and dry the water in time.Because the river water has a certain degree of pH, it will have corrosion effect on the hook.If there is water residue, it is likely to make the sharp rust rust.

2. Do nt forget whether you are tired every time you fish. All the hooks used on that day are spread all over the ventilation place to dry and dry.

3, often check the Fish hooks one by one. If some hooks are found to have rust points or blunt, use small pieces of fine sandpaper to polish, and it can make it bright and sharp.The hooks that can no longer be used are resolutely eliminated, and it is never a pity.

4. If you do nt need a fish hook for the time being, you can wipe it with a sewing machine or put it in a box with talc powder. You can also find a Square sponge plate to arrange the hook in accordance with the type of the model and tie it on the sponge board in turn.

5. The fishing hook that is not used in time to open the bag can be placed in a small self -sealed bag and squeezed the air in the self -sealed bag with both hands to avoid the fishing hook from oxidizing and rusting in the air.

6. Check out if the fish hook is sharp before use.Be careful when grinding.Only grind in one direction.Oil and stone movement, Fish hooks are not moved.

1. How is the type of fishing hook divided

The hook of fishing is the most important one in the Fishing gear. There is no way to talk about without fishing hooks.There are many types of fishing hooks, and there are two main classification methods:

1. Divide in length and shape

(1) Long handle hook: The length of the fishing handle is about twice the length of the hook tip to the hook curved.It is mainly used for deep water fishing with a depth of more than 7 meters in freshwater and a sea water depth of 50 meters.Long -handed hooks have the characteristics of difficulty deciring.Such as Maru Shi, Sleeve, fox, etc.

(2) Short -handed hook: The length of the fishing handle is about double the length of the hook tip to the hook curved.It is mainly used for shallow water fishing with a depth of less than 2 meters of fresh water and less than 50 meters of sea water.Because the short handle hook handle is short, the hook handle is not easy to expose after installing the bait.Such as Isey, Xiaaji and other hooks.

(3) String hooks: also known as Jane Grace and Ant hook.It tie the fishing hook into a string, so it is named.Generally, 315 fishing hooks are tied to the main line.It is mostly used for flying sea rods. Because each hook is separated from a certain distance, it is at different Levels of water after falling into the water.fishing can be caught in different water layers, which increases the hook rate.Because the hooks are more, the distance is long, and the distance is long. Therefore, it is recommended that you pay special attention when you throw your throwing, so as not to catch the hook to catch your body.

(4) Chaotian hook: Also known as standing hooks and Tuo hooks, it is characterized by the hook pendant.The lead pendant is located on the hook tail of the fishing hook. The shape is oval and there is a groove in the middle. It is used for tie fish wires.After the fishing hook is into the water, under the float of the Fish drifting, the hook tip will rise up, higher than the plane of the bottom of the water, it is not easy to be covered by mud or water plants. It is conducive to the fish bite of the fish.

(5) Triangle anchor hook: centered on the fishing handle, the three fishing hook tips are even out, and the distance between each fishing hook is 120 degrees.This hook is often used to fish all kinds of freshwater fish and the upper layers of water in the water body, and it is also used to Fish Fish fish in the coastal areas.

2. Press the characteristics of the hook type

(1) hook hooks: This hook type has no thorns.The hook is sharp and sharp, the hook is long, the hook is thin, and the hook is light. It is suitable for small fish species that inhale and eat.

(2) Izu hook: This hook type has a pour, the tip of the hook is slightly crooked, the hook handle is long, and the hook is sharp.Suitable for freshwater, suitable for catfish, blackhead fish, etc.

(3) Xiaoyi hook: This hook has a stabbing.The hook is shorter than that of Eatney, the hook body is thicker, and the hook body is slightly arc.The hook rate of fish is high.Suitable for freshwater carp, grass carp, blackhead fish, etc.

(4) Isey hook: This hook is divided into two types: pastory and no piercing.The hook handle is short, the hook body is thick, and the hardness of the fish hook is good.After eating the fish, it is not easy to vomit hooks. The hook rate is higher than the long -handed hook. It is suitable for freshwater fishing to get big fish.Such as: grass carp, big head fish, carp, etc.In tossing fishing, this hook is often used to make an explosive hook.

(5) Thousands of hooks: This hook type has a pour, mostly long handle, the tip of the hook is curved inward, the hook handle is not parallel and tilted outward (commonly known as the "crooked mouth hook").Escape.Suitable for freshwater, a variety of fish, and the most commonly used sea fishing hook.

(6) Tube pays thousands of hooks: The end of this hook hook handle is bent into a round shape, and the hook type is the same as Qian. The fishing line is tied to the hook through the hook handle, and the lines are firmly tied to fish for large fish.It is mostly used for sea fishing fierce fish, and the fish is not easy to escape after eating hooks.

(7) Shin Kong Donggou: This hook type has no thorns, long hooks, sharp hooks, wide hook doors, high fish rates, and the superiority of fast fishing and fast.Suitable for fishy fish species.Such as: catfish, Luo Fei fish, etc.

(8) Improve the new Kanto hook: This hook type is slightly improved on the hook type of Shin Kong. The hook handle is longer than that of Shinsen.

(9) Squid hook: Mostly used for seawater, for squid dedicated, generally dragging fishing, using the fishing method of throwing, dragging, teasing, and swinging.It has a strong temptation and fast fish.The squid hooks on the market can be divided into: hunter shrimp, shimmer shrimp, ups and downs, lead types, etc.

(10) iron board hooks: In deep or offshore fishing and bottom fishing methods, iron plates are used for bait and lead.It has a variety of styles, and its colors are mainly bright.The state in the water can make seafish greatly attractive, and the trigeminal hooks used in it can greatly increase the potential of Fish hooks.Suitable fish groups include large -eyed tuna, Qinggan, Bai Bu, seven o'clock, etc.

(11) Explosive hook: for sea pole fishing method.The design of the transparent rubber Tube above can prevent the hook from being entangled between the hook.Blip the red nylon offline, the six Fish hooks are opened. The spring design in the middle can be more convenient and fast, and the fish species in all directions can be caught, which greatly increases the fish acquisition.It is suitable for throwing fishing in freshwater waters. It can catch larger catfish, grass carp, carp, etc., and can also catch catfish, catfish, or use stinky bait to catch catfish and catfish.

(12) String hooks: In fresh water, it is useful in seawater fishing.It is on the sub -line by five or more Fish hooks.It is divided into two types, one has multiple hooks on the sub -line, one is a sub -line and a branch of multiple hooks.At the bottom, there are lead or bait cages. The sub -lines are long. The fishing hooks tied to the sub -line from deep to shallow to the main line, which can catch fish with different water layers.

(13) Painted bait hook: also known as bionic hook, fake bait hook.It is made of various substances to form bidding bait to hide the fishing hook.It is generally used for sea fishing. It uses methods such as throwing, drag, and teasing to lure the middle and upper fierce fish.

2. Which part of the fishing hook is composed of

There are many types of Fish hooks, but no matter what type of fish hook, the structure is similar. The structure of an ordinary fishhook is usually composed of six parts:

1. hook tail

Also known as the handle head and hook shaft, it is the upper end of the hook handle. Its role is to prevent tied fish wires from slipping off.There are many shapes of the hook tail, including straight flat heads, side flat heads, and round heads. The edges must have a certain backstop.

2. hook handle

Also known as the hook to refer to this section from the handle head to the hook curve, the role of the hook handle is mainly used to tie the sub -line.Different hook hooks are long and short. Generally, when fishing or two fierce fish, it is suitable for choosing a long hook handle, so that the fishing hook can be thorny and easy to pick up the hooks; if it is fishing small fish, small fish fishIf you use a short hook with a short hook, it is not easy to block the mouth.

3. hook bend

It is the part of the bottom of the fish hook. Its role is to hook the fish firmly, it is not easy to decompose, and it will reduce the tension of the fish hook to the entire fish hook to a certain extent.Different hook -shaped hook bends are also very different, such as circular, Square, streamlined, etc. Many fish hook manufacturers will now enhance the tensile strength of the fish hook through the angle of the hook bend and reduce the Running fish.

4. hook tip

This place is used to thorn fish for the first time, and it is also the most sharp place. The good fish hook must be rigid and sharp, and the rusty or bald hook tip will be difficult to pierce the fish mouth throughStab.If the tip of the hook has an inverted thorns, the pheasant is generally 1/3 of the hook tip.

5. hook doors

Also known as the hook mouth, it refers to the distance from the tip to the hook handle. The larger the hook number of the fish hook, the larger the width of the hook door, the relatively better the size of the hook door.Then we have to choose a wider hook door, but if the fish mouth is relatively small, we are the Fish hooks that choose narrow hook doors. When fishing light fish sliding fish, we should also choose a narrow fish with a narrow hook door.hook.

6. hook deep

Also known as the bottom of the hook, it is the height from the tip to the tip to the bottom of the hook. This distance can also share the tension of the fish to the tip of the hook. If this height is too small, it may be easy to run the fish, but if it is too large, it may be too large.If it is, it will cause the phenomenon of the gear, so you must choose the appropriate height according to the fishing target fish.

1. The choice of Fish hooks mainly depends on what aspects

There are many types and sizes of Fish hooks. Many friends do not know how to choose Fish hooks. For novice friends, choosing Fish hooks mainly consider three aspects: three aspects:

1. Target fish

Different Fish hooks are different.For example, the most commonly used cotton hook fishing fish fishing is the most commonly used in fishing hooks. The bean hooks are mainly used by catfish and black fish. The most commonly used fish hook for fish fishing is the pill.The world's fish hook, the most commonly used fish fishing can be a thousand and Fish hooks.

2. fishing scene

fishing is generally divided into two types: wild fishing and commercial fishing ponds. The environment of wild fishing is complicated. I do nt know what fish and multiple fish to catch in the next pole. Therefore, the range of wild fishing hooks is very large.It is recommended that you choose a fishhook with thicker hooks and moderate size. Of course, you can also determine what kind of fish hook you use according to the size of the fish in the wild fishing environment. Choose it according to your own situation.The most reliable.

If the commercial fishing pond fishing, the size and hook type of the fish hook should be more rigorous, because the fish in the fishing ground are all artificially raised, and the body shape, weight, and activity are similar, and the types of fish are basically basically basically.Same.

3, fish love

The main impact of fish feelings is the choice of fish hook size. The size of the fish hook is also very important. It should be matched with the individual size of the target fish.If the fish hook is too large, it will increase the difficulty of fish bite hooks. If the fish hook is too small, it will easily cause Running fish.For example, catfish with less than two below 2, use the Sleeve hooks below 2, fish for 2 to 5 catfish, use 2 ~ 4 Sleeve hooks, fish with catfish above 5 or two, and use 4 ~ 6 Sleeve hooks.

2. What kind of fishing hook is a good fish hook

The importance of Fish hooks in the fishing process is self -evident. Good Fish hooks can reduce a lot of accidents and improve the quality and quantity of fishing. So what kind of fish hook is good?Generally speaking, there are three main requirements for good Fish hooks: strong, tough, and profit.

1. Strond

If the fish hook is not strong enough, it is easy to break during use.Especially when encountering big fish, the fish hook is not strong enough to break or deform, which will cause the big fish to escape.When judging whether the fish hook is strong, we can judge with intuition and feel. Generally speaking, the stronger the hook body, the thicker the hook body. Another way of judgment is to see what the material of this hook isIs there a rusty hook?

2. Toughness: flexible

Without rigidity is not enough to resist external pressure, without flexibility, it is easy to cause rigidity to fold.Any material involved in force cannot ignore the concept of flexibility.Flexibility is the basic attribute of the material. Correspondingly, the fishhook will be tested repeatedly when the fish hook is produced.How much is tough?There is such a test method: fix the hook handle, rotate the tip of the hook.The toughness is the most suitable on the hook of the 90-135 degree angle.

3. Return: sharpness

The more sharp the fish hook, the better its puncture.So, when the fish eats bait, as long as the pole is slightly moved slightly, the fish hook can get on the mouth.The fish hook is not sharp. Only after the test can we know that we can buy a thicker book, which is about five cents to about one dollar.Putting on paper with a hook tip, a layer of stacking a layer of testing. Generally speaking, it is already sharp enough to wear 5 layers of paper. Generally, the big hooks should wear about 8 layers of paper.

1. The tie of the fish hook

Fish hooks are commonly used tools for fishing. They are usually tied with fish lines. There are many ways to tie Fish hooks. The following introduces several commonly used fish hook hook methods:

1. Method 1: Wrap the line to the hook handle, and then slowly wrap it around, leave the head head and tighten them hard.

2. Method 2: Wrap the wires into two coils, then turn one of the coils below the hook handle, then put the other section of the coil above the handle, then tighten it, and then wrap the remaining thread around the line.Out of a coil, wear it out of it, and finally tighten it.

3. Method 3: First walk a section of a line onto the handle, pull the head end of the head to the head of the handle, then wrap the other line to the line, then tighten it, and then tie the end of the end.Essence

4. Method 4: First wrap a section of line under the hook handle, then slowly wrap it, put a end line head from the opposite circle, and then tighten the other line head from the circle.It's okay.

5. Method 5: First, the line of the line is wrapped into the head of the hook handle, so that the line forms a semicircle, then pulls a line head, and tighten it out of the circle to tighten it.

6. Method 6: You need to wrap the line to the hook handle, wrap it around at least one or two times, and then tighten it.

7. Method 7: First fix it with a ruler, wrap a section of line from the bottom of the hook, leave the line head to go out from the circle, and wear the other line head from the opposite circle.Remove it, and finally tightly tightly.

8. Method 8: First, slowly wrap a line on the head of the hook handle, and then select a line head to go out from the circle, and finally tighten it.

9. Method 9: Slowly wrap a section of line from the bottom of the hook handle, put one end line out of the circle, and then wear the other end line from the coil in the opposite direction, and finally tighten it.

10. Method 10: Wrap the line from the middle position of the distance to the hook to the hook, and then tighten it after wound, but leave a small coil, put a end line head into the coil, and finally tighten them hard to tighten it.It's right.

11. Method 11: Select a small section line, tie it to the hook handle, and then wrap the remaining lines onto the handle, all the wraps in the hook handle.

12. Method 12: Wrap a section of line onto the handle, then put the line head into the wrapped coil, and then tighten it.

13. Method 13: Select a section of line and start wrapped from the bottom of the hook, leaving a part of the line header tightened.

14. Method 14: First wrap a section of line into the hook handle, leave a part of the coil temporarily, and finally tighten it slowly.

2. What are the precautions for tie Fish hooks

1. When the hook is tied, there should be a certain line length, and each time the fish hook must be tied to a line head with the same length, so that the tie is very neat to ensure that the child line length is the same.

2. When tie the hook, you must gently walk around (five or six laps) when the hook handle is winding.

3. When tightly, slowly pull the head head, which can minimize wear.

4. This one is very important to avoid many broken line phenomena. When tightening the line, the front of the line is bypassed the hook handle, because the hook handle is tilted backwards.Causes the line.

5. When tied the hook, you should also pay attention to making the hook line on the inside of the hook handle. This is important, but it is easy to ignore. The tie line is on the inside of the hook handle to meet the requirements of the force.fish body; if the hook wire is on the outside of the hook handle, it is not only easy to decompose, but also when the hook hook is stressed, the end of the hook handle is also easy to wear the hook wire to cut the fishing line.

1. How to make a fish hook

The fishhook is a equipment for fishing. It is generally bought directly in the Fishing gear shop. If you are interested, you can also make your own fish hook. You can use a needle, a pins, and a sewing needle.Essence

1. Do not make your own fish hook

It is relatively simple to make a self -made fish hook. Open the safety sales. From the bottom of the needle, pull it open, and a simple fish hook is made.

2. Back needle self -made fish hook

Loose the side of the back -shaped needle, leave a complete ring to facilitate the tied to the fishing line, and fold the one -side side of the complete ring into a reverse hook to make great achievements.The back -shaped needle is easier to transform into a fishhook than a needle, because there is no spring in the middle of the back -shaped needle, and the end is not as sharp as the tip of the needle.

3. Slim clothes DII fish hook

Generally, the sewing needles are made of steel, because the steel contains carbon and has a large hardness. If it is directly bent, it will be easy to break, so we need to put it on the fire at high temperature and burn it.After the sewing needle burns red on the fire, use two tweezers to pinch the needle, and the other can be carefully bent into a hook shape.

4. Homemade Gorge hook

Canyon hook is also known as fish card. The primitive person in the BC was captured by making such Fish hooks. The production method was to find a hard stick or branch, intercept the length of about one knuckle, peel off the bark.The ends of grinding are sharp, and use a knife to make a small groove around the branches (so as to ensure that the line is tied to the hook, and the hook is parallel to the line), wrap the bait in the middle of the hook.

5. How to make stab hook production

Take a section of locusts directly, and then only keep a thorns at the bottom, just flatten the thorns on the other branches. You can save the trouble of processing.The branches are okay.

6. How to make a Bone fish hook

If you can find the Bone of poultry, you can also use a fork Bone to make a fish hook.Be careful to break the "leg" half of the fork's side, and use a knife to draw an inverted with a knife on the "leg" to shorten the half of the "leg". Put a hole in the other end and connect to the fishing line.

2. Can homemade Fish hooks fishing fish?

Compared with the Fish hooks in the Fishing gear shop, the self -made Fish hooks are worse than the degree of sharpness and solidity, but it is not impossible for fishing.Wait, but if these homemade Fish hooks are not done well, they may run out of fish.

Therefore, homemade Fish hooks are mainly played during Outdoor camps. If you really want to fish well, it is recommended to use a special fish hook.