1. What types of road Lights are

1Divided by the height of the street lights: high rod street lights, middle rod Lights, street lights, courtyard Lights, lawn Lights.

2Divided by street lights: hot -dip galvanized iron street lights, hot -dip galvanized steel street lights and stainless steel street lights.

3Divided by the street light source: sodium light street lights,ledStreet lamps, energy -saving street lights, new type of Summing street lights.

4Divided by styling: Chinese Lights, antique Lights, Landscape lights, single -arm street lights, arms street lights.

5Divided by power supply: city circuit lamps and Solar street lights and complementary scenery street lights.

There are many types of street lamps. Different lighting technologies are suitable for different needs. The fundamental purpose is to design a high -efficiency electronic energy -saving street light with long life, low power consumption, high power factor, and small current harmonic content.

2. What is good for street lights

The street lighting is generally used for high -pressure sodium lamps,Metal halide lamp is also a common source of street lights.From the perspective of lighting, incandescent lamps are the best, but the light flux is low and the light effect is poor.fluorescent lampThe same is the fluorescent lamp. The light emitting principle depends on the gas electrical ionization to stimulate fluorescent powder to light up. Its color rendering is low, but the light flux and the light effect are much better than the incandescent lamp. The neon Lights are almost no other benefits except for good -looking.Extremely low, you cannot do special lighting Lights; the performance of metal halide lamps is very good, especially its power can be made very much than other lamps; LED lights are highly efficient and energy -saving and environmentally friendly, but there are certain certainty.Technical defects.Therefore, in general, it is more appropriate to use metal halide lamps or LED street lights now.

What is the difference between street lights and Landscape lights

1Different height

The difference between street lights and Landscape lights is mainly reflected in the height. The conventional height of street lights is6-12Mi, there are also some routine heights of some street lights are6-20rice.But the general height of Landscape lights is3-6Mi, this is because Landscape lights are ornamental. You do nt need to do too high. The higher the materials you need, the more expensive the cost.

2Different lighting power

Because the street lights are to provide sufficient illuminance, their lighting power is generally large, generally in250-400WWithin the range, the specific power is considered according to the width of the road, the surrounding trees, the height of the light rod, and whether it affects the surrounding residents.

Landscape lights are relatively small, generally80-150WIt may also be smaller, because the landscape lamp has a basic lighting effect. Its biggest effect is to provide strong ornamental. Its light source power can reflect the overall shape of the lamp.Too bright.

3Different applications

street lights are generally used in the main roads, secondary roads, urban squares, communities and other places in cities or villages. lighting needs are generally relatively large.

Landscape lights are generally installed in independent areas, such as parks, gardens, high -end communities, commercial pedestrian streets and leisure squares. Landscape lights are also used in many tourist attractions.

4Different functions

The main role of road Lights is lighting, which must be able to provide pedestrians and vehicles with better lighting.But Landscape lights only need basic lighting. The most important thing is viewing, which is used to decorate the surrounding environment and create an atmosphere.

The shape of the street lights is not so diverse, and there are generally several types.But the Landscape lights have a lot of shapes, very casual and unrestrained.It can be customized according to the surrounding environment and special reasons.

one,Landscape Bright ProjectWhat problems exist

1. The overall planning is lagging, no planning or no planning engineering facilities construction, and the phenomenon of disorderly and uncontrolled cities makes the city light up.

2. Copy copy and imitate blindly.In the process of night scene lighting, in the process of night scene lighting, regardless of the characteristics of the city's own, historical and cultural characteristics, and their own financial conditions, blindly study the characteristics of light construction in other cities. Simple imitation will inevitably lead to the same as each other.

3. Only grasp the festival and ignore the usual night scene lighting.The night scene lighting of festivals or major political activities is understandable, but the city's night scene lighting is by no means just a few festivals.

4. Ignoring the scenery and safety of the day, some lighting projects are beautiful at night, but at a glance, it is not beautiful and uncoordinated with the surrounding environment during the day, and there are hidden dangers.

2. How to reasonably design the landscape lighting project

1. Do not design a Chinese and unpretentious landscape lighting project, which requires coordination with the local geographical environment and overall style.Paying attention to practicality, while beautiful, can also play a role in guiding landmarks.

2. The planning area of the planned city should not be too large, do not have too much in number, and do not build a large amount of rockery falling projects such as waterfalls and waterfalls, artificial water systems, and other landscape lighting projects. This will waste a large amount of resources and energy. It may exceed the local economic and social development level andFinancial tolerance.

3. Dailyization of landscape lighting projects.Do not open the landscape landscape to light up on the holidays, and return to the bland after the holiday. You must achieve daily unity.

4. A complete lighting project should be a change in spring, summer, autumn and winter, rather than only a few important festivals.

5. Don't blindly light up the streets on the street because you like the beauty of the light, leading to the high light color, destroying the original visual effects of the landscape, and losing the hazy beauty at night.

6. The landscape lighting project needs to achieve the overall lighting design.

3. precautions for Landscape lighting Project

1. Energy -saving

lighting should start from functional needs, decorative Lights should conform to the function of "beauty", reflecting a cultural accomplishment and cultural atmosphere.

2. Avoid disorderly development

Avoid disorderly development and excessive development of landscape lighting.The urban lighting project requires the participation of professionals, and the overall planning and design.The brightening project of the prosperous neighborhood requires scientific planning and strictly implement relevant standards.

3. Combination of urban planning

The combination of night scene lighting and urban planning, formulating the overall planning development of urban lighting according to the characteristics of the city, has made the entire city's night lighting focus outstanding and distinctive.On the one hand, it is necessary to strengthen the light environment management and divide the light environment function; on the other hand, it is necessary to run strictly in accordance with the standard design standards, which is the "low -carbon" road for urban lighting.

1. How high the landscape lamp is generally

The Landscape light must choose the appropriate light column height to ensure uniform lighting.The height of the landscape lamp is related to the purpose. The general Landscape light is about 3 meters. The space of a large number of people is generally about 4 to 6 meters.

Second, how much is the landscape lamp spacing appropriate

1. Light lawn Lights on all sides. Generally, the 18W energy -saving Tube light source is used. It is suitable for various garden gardens, sidewalks and trail lighting. It provides pedestrian night lighting. The lighting time is usually 18: 00 ~ 6: 00.The distance between the commonly used lamps is 6 ~ 8 meters, and there is no clear specification from the roadside, but it is generally designed between 0.2 and 1.5 meters.

2. One -way outlet light lawn Lights are used in wider roads and use 26W energy -saving pipes or 35W gold halide lighting sources.The distance between the commonly used lamps is 8 ~ 10 meters, and the generally designed between 0.5 and 2.0 meters.

3. Garden Lights generally use 70W gold halide lighting sources. It is suitable for activity gardens, wide sidewalks, and lane lane lighting in the community. The distance between the lamps is usually 10 ~ 15 meters.It can also be evenly arranged in the center of the courtyard according to the number of lamp design without being restrained by the roadside distance.

4. Other Landscape lights, generally choose from the project style, the preferences of the owner, or the non -standard design. The distance from the roadside is generally between 1.0 and 2.0 meters.

5. The street lights of high light rods are used with 150W gold halogen lighting sources. The distance between the lamp is usually 15-20 meters. Generally, it is set in the road isolation Belt. The distance from the roadside should be determined in conjunction with the width of the road isolation Belt.

6. In addition, some special lamps, such as aluminum cast lampstrangle, explosion -proof glass lamps, surface -shaped landscape style lamps, etc., often set up directly on the edge of the garden road, corner of garden roads, small trails, light dead corners, etc.What distance is left to the roadside.

1. What are the qualifications for the construction of the landscape lighting project?

The construction of landscape lighting project requires the qualifications for the professional contracting of urban and road lighting engineering.Projects include: functional lighting of roads and streets; functional lighting in residential areas; functional lighting of Outdoor public space; landscape lighting of structures and buildings; landscape lighting of parks, public green spaces, residential areas; landscape lighting of scenic spots, famous monuments;lighting intelligent centralized monitoring management system; lighting supply system project.

The qualifications for the professional contracting of urban and road lighting engineering are divided into first, second, and third Levels.Qualifications have certain requirements for corporate assets, main personnel, and corporate engineering performance, and the scope of contracting corresponding to different qualification Levels is different.First -level qualificationThe construction of various cities and road lighting can be undertaken.Secondary qualificationThe construction of cities and road lighting projects with a single contract of not more than 12 million yuan can be undertaken.Three -level qualificationThe construction of cities and road lighting projects with a single contract of not more than 6 million yuan can be undertaken.

2. Contents of the construction plan of landscape lighting project

1. The design drawings of the lighting project are explained and explained. For things that do not understand and understand, you should communicate more and coordinate, or make a step -by -step drawing.Essence

2. Make a detailed construction material list, labor type, and Tool list, etc. according to the amount of lighting projects, and create a good reference for the Smooth construction.

3. Materials classify the name, model specifications, and quantity of the lighting equipment required for the lighting project, and the use of the use of the required materials must be marked, and the required materials must be guaranteed.It may be in place to save time.

4. Implement the planning of the construction progress plan of the lighting project. The progress sheet is based on the period of lighting the project, and the workload of the project project, work content, and when the project is completed through scientific and effective arrangements to achieve reasonable allocation of manpower and material resources.Financial resources, the construction task is reached in accordance with the time of acceptance, the schedule of the progress plan also refers to the construction process and the intersection scope of the work that may occur.

5. On -site survey of lighting engineering projects, determine the stacking location of the entrance materials, and the temporary erection of water and electricity facilities, and need to understand the situation of other adjacent construction units, so as not to cause other unpleasantness in the construction, to understand it in a timely manner, and understand it in a timely manner.Communicate and solve it to ensure the Smooth progress of the construction of the lighting project.And when checking the project, compare whether the construction drawing is deviated, so as to make early, solve it early, change early, and early construction.In addition, it is necessary to understand the transportation, material and Tool suppliers around the project, to prevent the urgent need to ignite when there is a shortage of Tool materials.

6. The materials are organized in order to determine the number of materials, the entry time, and delivery time. For the stacking of the materials, it must be organized and cannot be placed arbitrarily to avoid affecting the integrity of the material.The secondary movement occurs the phenomenon of misalignment materials. Due to the particularity of the lighting equipment, it is necessary to choose a relatively high and dry place to avoid damage to the equipment due to rain and snow. The material needs to be used in accordance with the use.It is far from flammable and explosive, and it is necessary to be equipped with fire equipment.That is, the materials used can be placed directly on the working surface to reduce the handling. The tools and materials should be placed separately to prevent damage to the lighting equipment.Register and quantity registration of classification materials to prepare for inspection.

7. Temporary hydropower can be set up, try to use the original line as much as possible, and must comply with relevant provisions and specifications of temporary lines.

8. The personnel divide the layout, divide responsibilities, responsibilities, choose technical, responsible, and experienced personnel to act as the person in charge of the work.This is a good way to avoid the problem of managers who manage everything, and can take out the energy to better coordinate and supervise the progress of the entire lighting project and other affairs.

9. property and personnel insurance at the construction site of the project construction site to avoid unnecessary losses and disputes to the company due to fire, stolen, and injuries.

1. What is a ground lamp

The land buried lamps are widely used in the field of technology lighting in my country. Because it is buried on the ground for people's lighting, it is named for land buried lamps. Voltage: 12V-220V, power: 1-36W, protection level: IP6.5, control method: Internal control, external control, DMX512 control can be available; there are two types: ordinary light sources and LED light sources in light sources. The high -power LED light source and small power LED light source are generally monochrome. , LED light sources have seven colors, and the colors are more colorful.Land buried lamps are widely used in squares, restaurants, private villas, gardens, conference rooms, exhibition halls, community environment beautification, stage bars, shopping malls, parking sculptures, tourist attractions and other places.

2. How to install the LED floor lamp

1, Preparation before installation

1) Prepare parts and need tools.

2) The power must be cut off before installation.

3) First dig the embedded hole according to the outer diameter size of the embedded parts, and then fix it with concrete.

4)The main line diameter must be greater than the line diameter of the lamp.

2, installation process

1) After the embedded parts are fixed, connect the input wire of the buried lamp with the external wires, and the phase lines, zero lines, and ground wires are connected and waterproof.

2) Use screws to fix the lamp component with the embedded parts.

3) Use the screw to fix the noodles on the lamp component.

4) After determining that the above operation is correct, connect the power.

3. installation of buried lamps

1. Before the LED buried Lights are installed, the power must be cut off.This is the first step in the installation of all electrical equipment and the basis for safety operations.

2. Before the LED buried lamp installation, various parts of the lamps should be sorted out.The LED buried lamp is a special landscape LED lamps buried in the ground. Once it is installed, it is troublesome to reinstall it.So you should be ready before installation.

3. Before the LED buried Lights are installed, the shape of the embedded parts should be connected to the size of the embedded parts, and then the embedded parts are fixed with concrete.The embedded parts played the role of the main body and the soil of the LED ground lamp, which can ensure the service life of the LED ground buried lamp.

4. Before the LED buried Lights are installed, a wiring device with an IP67 or IP68 should be used to connect the external power input and the power cord connection of the lamp.In addition, the power cord of LED buried Lights is required to use VDE -certified waterproof power lines to ensure the service life of LED ground buried lamps.