What should I do if I can't suck the suction shelf

1. Dip water

The main reason that causes the suction shelf is often on the plane. When there is dust on the wall or mirror surface, it will cause air leakage to the inside of the suction cup.Impurities exist.At this time, you can dip it in water, or use hot water to soften the suction cup and stick it. Remember to slowly press out from the middle to the surroundings to drive out the air, but be careful not to blame the suction cup and deform.

2. Put the egg white

Separate the egg white in the egg from the egg yolk and apply the egg white to the inside of the suction cup with a cotton swab. Remember to be uniform, and only a thin layer is enough.After going up, the egg white is completely killed. It takes almost 12 hours to work. At this time, the suction cup is firmly fixed on the wall, and it will not fall off anymore.The principle is that the egg white contains glue, which can help the suction cups better adhesive and the contact surface, and the glue fills the gap and squeeze the air, so the suction cup will firmly suck on the wall.

3.

Use toothpaste to replace the egg white can also have the same effect. Squeeze out an appropriate amount of toothpaste and apply it on the back of the suction cup, and then stick to the corresponding position. When the toothpaste is almost combined with the hookThe effect of water and soapy water is much better.

4. Wipe it with alcohol

A large part of the suction cup folded is that the position of the paste is not handled clean. Wipe it with alcohol and remove the dust, so that the paste will be firm.

How to install the suction shelf

1. It is best to install the wall with a Smooth plane;

2. Dry the wall with a dry cloth;

3. Press the suction cup to the wall from the middle to the surroundings;

4. Then wait for a while before use.

How to remove the suction shelf

1. If the glue is hard (such as AB glue), it can be heated with a hair dryer with a hot air. After softening, use the knife to remove it.

2. If the glue is soft, cut it directly with the artist knife.

3. If the glue is relatively thin and there is no thickness, you can use the fish wire to be removed. Use a wet rag (rough) to add a cleaning agent a few more times.

[kitchen Multifunctional Set] What are the classified kitchen racks in the kitchen?

What are the categories of the kitchen multifunctional shelf?

The kitchen multifunctional shelf is divided into two types, one is wall -mounted, and wall -Hanging multi -functional racks are hung on the kitchen wall, which can save our space more.You only need to put it simply to complete our goal of storage.This mode must be careful to dry it when we put the tableware. If our tableware is still wet, it will cause our kitchen utensils to rust or cause our area to water.

There is also a flat type. This type of kitchen utensils are still casual.Where is the right place, it can be placed and where it is very convenient, and it does not need to be installed. It is loved by many consumers.In the process of using this type of multifunctional stand, be sure to wipe it a few times to make it cleans a few times.

How to buy the kitchen multifunctional shelf

1. Look at the material

Whether the material of the rack can not rot or deformed rust in a humid environment. Carbon steel is cheaper than stainless steel, but it is usually higher than stainless steel, but it will rust.The anticorrosive performance of stainless steel is better, the surface is Smooth, the use time is long, but the strength of stainless steel is low, and the price is expensive.

2. watch net film

Nets pay more attention to the bearing gravity. Generally, each floor of the kitchen can bear 30-50kg each floor, but the standards of various manufacturers are different.High -quality mesh can see the precise welding process, the mesh pattern is more dense, it is not easy to be bent, and more items can be placed.The inferior mesh has no way to meet the requirements of the load. The density is large and can only put some small items.

3. Look at the connection

The connection of the Kitchen rack can adjust the layer height of the mesh. The unique design can be freely moved at any time, and the ordinary shelf fixed structure design cannot be adjusted, and more items cannot be placed.

4. Look at the wall

High -quality kitchen -stitched rack Tube walls are generally more than 0.8mm, and it is not easy to deform, and the load is also guaranteed.The inferior Tube wall is only about 0.4mm. If it exceeds the maximum load, it is easy to bend and deform.

5. Look at non -slip glue pads

It is best to have anti -slip glue pads in the Kitchen rack, and it can be adjusted according to the ground to facilitate the use of uneven ground. It uses good material for rubber, which is more abrasion -resistant and non -slip to make the kitchen shelves more firm.

[bathroom glass Set Film] How to clean the glass shelf in the bathroom glass?

Is the bathroom glass stand?

The bathroom is a place where it is often dealt with with water. The environment is relatively humid. The bathroom racks should be in a humid environment for a long time. Therefore, when choosing the material of the rackMaterial.Because the bathroom is much greater than other space humidity, if it is a metal material, it is easy to rust, and the rusty shelf is indeed very sad to use.The glass rack is a good choice.

General glass racks are made of tempered glass.Not only is styling and simple, but also easy to clean, but be careful to avoid strong impact on the glass surface.glass setting the rack is precise workmanship, complete quality.Metal electroplating, consolidating durable, not easy to rust, strong bearing capacity.The transparent and bright, highlighting the fashionable beauty.The glass shelf uses high -quality metal plating. The design is well -behaved, cumbersome, clean and beautiful, can promote air circulation, reduce dust accumulation, and open design, making the storage at a glance.

The glass shelf has a variety of functions in one body. It can be used not only in the bathroom, but also can be used as a kitchen shelf/fruit stand/vegetable frame.Its advantage.

How to clean the glass rack

1. Wipe the rack with water and dry it with a soft cotton cloth. Do not use any grinding cleaning agent, cloth or paper towels, and any acidic cleaning agent, brighter abrasive or cleaner or soap, wipe the surface of the rack surface on the surface of the rack surfaceEssence

2. Because the long -term residues of chromium -plated surfaces such as various kinds of wash and shower gels are usually used to degenerate the surface of the shelf and directly affect the surface quality.Please clean the surface of the rack once at least once a week, and it is best to use a neutral cleaner.

3. For the difficulty of removing dirt, surface dirt film and stains, please use mild liquid cleaner, colorless glass cleaning solution or polish liquid without wear, and then use water to clean the rack and use it with waterSoft cotton wipe dry.

4. You can use cotton wet cloth with toothpaste and soap, wipe it gently, and then wash it with water.

5. You can use wax oil with strong decontamination capacity and apply it on a clean white cotton cloth to completely clean the entire product. The cycle is generally 3 months, which can extend the life of the rack.Remember that every time you clean, you must dry the water stains, otherwise water stain dirt may appear on the surface of the pendant.

CD frame classification

1. CD frame is divided by material

It can be divided into three common types: plastic CD frame, wooden CD frame, and metal CD stand.Materials for audiovisual racks are generally wood and metals (with iron, aluminum alloy, etc.), especially the most materials of iron, generally can be seen in audiovisual stores and supermarkets.

The audiovisual rack with iron as the material is divided into plate -type audiovisual racks and mesh audiovisual racks:

Plate -type audiovisual rack: Generally consisting of pillars, layers, left brackets, right brackets, and separated strips. There are main frames, attachments, single -sided, and double -sides.

Net audiovisual rack: Generally consisting of pillars and layers, fixing with screws; structural is simpler than plate audiovisual racks, no differences in main and attached frames, and can not be extended infinitely between the frames. ThereforeThe low audiovisual rack.

2. CD frame according to the type of use

It can be divided into two types of land with CD frames and cases for CDs.The CD rack is placed on the ground, like a CD frame like a cabinet shape; the CD rack is used on the desktop with a CD frame.

How to choose a CD frame

1. Select according to the placement position

If you place it on the corner and the ground, you can choose to use the CD frame; if you place it on the desktop, you can choose the CD frame of the case.

2. Select according to the number of CDs

The size of the CD frame is large and small, and the appropriate size should be selected according to the quantity when purchasing.

How to make a self -made CD frame

Material preparation:

Old hard paper shells (carton), steel needle, cutting knife, ruler, pen.

step:

1. Take 11 centimeters on the left and right in the middle of the hard paper shell (or carton), draw the line with a pen, and then leave the white on the top, draw the top line, and pay attention to the number of single numbers.

2. Use the paper knife to cut the paper shell along the horizontal line, and then turn the paper shell to pultry the line.

3. Push the horizontal grid from the front extended line every other.

4. Put the four corners of the upcoming homemade CD rack with steel needles, then put on the rubber band to fix it. Finally, you can dress appropriately. This can be completed by a homemade CD frame that can be installed before and after.

Reminder: Generally, the length and width of the CD box are 12 cm. When the CD frame is made, the width must be slightly wider than that of the CD box.

[Filem Stocks installation] What are the precautions for the installation of shelves for the installation of the shelves of the shelf?

What is the installation step of the shelf?

1. Preparation Tool

What are the installation steps for shelves now?Xiaobian first introduced the installation steps of the shelf storage shelf is a preparation Tool to allow everyone to face the problem calmly.So, do you know what the tools you need to prepare in this shelves are prepared in the installation steps?During the installation of the shelf, there are very few types of tools that need to be used, but one or two of them are not tools that ordinary families will use.In the installation steps of the shelf, the tools you need to prepare are wrenches, pliers, and electric diamonds.

2. Planning

The installation steps of the shelf are planned, which is one of the very important steps.There are many places for the installation of the shelves. You can operate the specific requirements of your home, such as installing it in the kitchen. Then, everyone must pay attention to its height and distance from the distance from them.It will increase your troubles in the process of cooking.During the installation of the shelf, everyone should pay attention to the size planned on the wall, and punch a punching according to the specific parts of the product. It is best to use things to mark it.

3. Observe the wall

What are the installation steps for shelves now?Xiaobian will introduce the installation steps of the shelf in the shelf is to observe the wall.Everyone may ask, what is the relationship between this wall and shelves installation?Everyone knows that in some people's homes, in their own decoration, the entire space may be planned again, and some hollow walls will be used. Such walls, the nailing power is very bad, so that their plants can not be placed.Therefore, everyone must check their walls during the installation process and install the shelf to install it on the solid wall.

4. Specific operation

The next shelf is installed to put your own products, one time, according to the relevant drawings, punching on the planned wall, and then fixing it with a nail.If everyone still wants to install the shelf to install the side of the hollow wall, everyone should first add the hollow of this wall to make it more nail, and then install it according to the relevant product drawings.Finally, the installation steps for the shelves that everyone needed to fix their products and fall from the air.

5. Summary

What are the installation steps for shelves now?Steps for the installation of the shelf, I will introduce it here. I believe that everyone can learn a lot of this step through this information and information.In fact, the installation of the shelf is still very simple. As long as everyone can be careful, then you can install any places you want to install in your home.If you still have questions about the installation steps of the shelves, it doesn't matter. As long as you can always focus on this website, you can know it very detailed.

precautions for the installation of shelves

1. Check out its model carefully before installing. It is better to check its size and overall number. Finally, check whether the surface is damaged. If so, you can apply for replacement.

2. The use of shelves is relatively flexible. It is clearly determined to be installed. If the indoor space is relatively large, you can be a bookshelf. If the indoor space is small, you can place some cosmetics or gadgets.

3. Pay attention to the problem of the material and installation of the shelves. The load -bearing capacity of the shelf is limited, and the overweight items cannot be placed. During the construction, the embedded parts should be made in advance according to use.