The difference between the double -layer Tent and a single Tent

1. Different manufacturing process

Single -layer Tent production process is relatively simple.

The double -layer Tent adds a layer of breathable internal account on the basis of the design of a single -layer Tent.waterproof and windproof, breathable internal accounts; the heat emitted by the human body will be condensed on the inner wall of the external account through the inner account, and then follows the inner wall of the external account to slide to the gap between the outer Tent and the inner account.sleeping bag.

2. Different volume operations

Single -layer tents are lightweight, small in size, small area, and easy to build.

The double -layer Tent is large, and there is a lot of space to occupy it. It covers a large area and is tedious.

3. Different use environment

Single -layer tents are mainly used for summer Camping activities such as Park leisure and beach leisure. Generally, it is not outdoors overnight, and the price is relatively cheap.

Double tents are generally used for Outdoor wild camps overnight. Because of the light weight, it is also used for snow mountain climbing, but it is necessary to use high -tech Functional fabrics and auxiliary materials, which are more expensive.

4. How to choose

Because in a cool season, the heat excluded by the human body will be condensed in the inner wall of the Tent under the influence of the air outside the Tent.Internal accounts are connected, and the heat emitted by the human body can pass through the inner accounts, and the water droplets that are condensed in the outer Tent can be flowing on the ground.Therefore, the general environmental temperature is more suitable for using a single -layer Tent when it is 5 C. When the ambient temperature is lower than 5 C, because the inner wall of the Tent will be cooked, it is best to use a double -layer Tent or a three -layer Tent.

The advantages of double -layer tents

Everyone knows the place where the Tent provides people when it is camped. Everyone knows that the temperature at night will be reduced, so the first Tent can keep it warm.Because of the temperature difference between day and night, the humidity at night will be very heavy, and the Tent should prevent moisture from being soaked.Especially in the mountains and forests, the fog is particularly heavy in the morning and evening, and the water vapor outside the Tent is severely condensed. If the fabric cannot be waterproof, small water droplets will be leaked in the Tent, and the environment is cold and wet, which cannot provide people with good rest places.

Because of the two requirements for tents above, single -layer tents cannot adapt to Camping.Although the single -layer Tent is also made of thick and waterproof Oxford cloth, there is only one layer. It cannot be kept warm and waterproof. It can not be adapted to rain.The double -layer tents are different. Its design is divided into two layers of external accounts and internal accounts. There is a space separated between the two layers.The external accounts block the wind and rain, and keep the internal account warm and dry. Whether it is raining or snowing, it can give travelers a peaceful place.In addition, the external accounts and internal accounts of the double Tent can be used separately. When the sun is large during the day, it can be opened alone, which becomes a gazehop.

How to put it in a double -layer Tent

1. Before building a Tent, you must first choose the right camp. Generally, you choose to stay away from the river.

2. First take out the Tent's foreign account and internal account when setting up. You can first set up an internal account, or you can set up the foreign account and then get into the internal account.Put one of them on the ground according to your own habits.

3. After the inner account is paved, remove the nail Bags, poles and other accessories.First handle the Tent pole, connect the Tent rods one by one, and the connection should be tightly tightened to make two long rods of equal length.

4. The pipelines of the Tent bolt on the internal account will pass the two long rods through the relative two pipes.Two long rods should be worn at the same time. The long rod will be arched up because of the Tent structure, and the Tent will be opened as a result.This process requires at least two people. It will be more convenient to operate by four people.When wearing a pipeline, wear the corner of the Tent to the bottom corner, do not wear a loop.The Tent supports the two ends of the long rod to the ring at the bottom of the corner, and the entire inner account will be fixed.

5. After the internal account is done, you can hang the foreign account. The method is to open the external account and cover it on the inner account.The windproof rope is designed on the external account. After pulling the rope straight, it is fixed with the windproof hook. One can strengthen the stability of the Tent, and the wind will not overturn the Tent.The two layers of tents are more powerful and warm and humidifying.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How to put on a normal Tent

1. First choose the camp. After considering the wind direction and terrain, choose a flat land and lay the inner account of the Tent on the ground (usually the inner account, but there are also some to support the external account firstThe principle is the layer of the Tent), and the nail Bags, poles and other accessories wrapped with tents are put aside first.

2. Take out the folding Tent pole, turn it over, straighten each section, and connect into a long pole.

3. Put the long fiber rod into the barracks (also known as the pipe) of the Tent.There are a few rods to be worn at the same time.

4. Insert one of the fiber rod into the corporate cave or on the bottom of the Tent (some tents are used with a needle ring, each has its own benefits), and then to the other end (the corner), hold the rod in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent with one hand, hold the Tent with one hand, hold the Tent in one hand, hold the Tent with one hand, and hold the Tent in one hand.The bottom angle, slowly arched the rod, supported the Tent, and then inserted the rod into the corporate eyes or needle ring.

5. In the end, it is a foreign account, open the foreign account, and the internal account.

6. There are some ropes on the external account, which is used to strengthen the Tent. It can generally not be pulled without any wind. It is best to pull it up. It also uses the nails. Several ropes are pulled evenly.

Different types of Tent construction methods

1. Triangular Tent

(1) Put the Tent in the ground, flatten the ground and nail the ground along the bottom.

(2) Smash the two branches from the Tent, put it on the isolation Tube, and then put it into the crossbar.

(3) The Tent coat is covered and the pull of the jacket is stretched to stretch all the outside.

(4) Way the rainproof hood into the support of the rod, put it on the wind resistance line, and complete.

Note: There is a space between the inner and outer Tent of the triangular double Tent. This space should be maintained. Do not make the inner and outer layers "stick" together. This space can prevent rain and warmth.

2. Ding -shaped Tent

(1) Put the Tent to the ground, nail the four corners (some are hexagonal) ground nails.

(2) The two groups (the hexagonal dome is three groups) of the Pepper rods. If the rod is a loose part, you need to connect it according to the instructions group.

(3) Put the puff rod into the custard of the Tent, and insert one end of the two groups into the pores. The other end of the two sets of rods is stretched hard at the same time.

(4) Speaking of tents shaking and forming can be placed on the ground.A jacket or a small rain cover with a jacket is completed.

Tips for building tents

1. Try to set up tents on a hard and flat ground, and do not camp on the river bank and dry river bed.

2. The Tent is selected in the sandy land, grassland, or rocky land.

3. At least there must be grooves. Do not take it next to the streams and rivers. It will not be too cold at night.

4. The Tent surface is best to see the early morning sunshine from south or southeast. Try not to be on the ridge or mountain top.

5. The number of tents is counted before the Tent was built.

5. In order to prevent insects from entering, a circle of kerosene can be sprinkled around the Tent.

What are the precautions for taking a Tent?

1. The entrance of the Tent should be carried on the wind, and the Tent should stay away from the hillside with rolling stones.

2. To avoid the Tent flooded when it rains, a drainage ditch should be dug directly below the top of the Tent.

3. Press the four corners of the Tent.Keep air circulation in the Tent, and cook in the Tent to prevent fire.

4. Before going to bed in the evening, check whether all the flames are extinguished, and whether the Tent is fixed and strong.

5. The Tent should be built in order: First build a public Tent.First set up a cooking Tent at the downwind of the camp, build a stove, boil a pot of water, and then build a warehouse Tent and their respective Camping tents to store public equipment in order.When the Tent of the entire camp is built, the boiled water has been opened, and you can drink and start cooking immediately.

6. Build a wild toilet: Choose a little lower at the downwind of the camp and stay away from the river (at least 20 meters).It is best to dig a rectangular pit with a width of about 30 cm, about 50 cm long, and about half a meter deep, and put some stone and fir leaves.Surround plastic cloth or packaging box on three sides, fix it, and the opening side should be back.Prepare some sandy soils and a handle of iron and a cardboard.After the stool, use some sand to bury the excrement and sanitary paper, and cover the pits with a board to eliminate the odor.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How to put it in the camel Tent

1. First move all the items in the Tent, and then unlock the four spring buckles from the Square Tube eyes so that the Square Tube can move;

2. Two people stand relative and stand on the vertical folding of the canopy bracket to ensure that when they are working hard, the top canal bracket can be folded;

3. Then each person holds the two brackets of the Tent in both hands, push the bracket in the direction of the opponent, and fold the Tent bracket;

4. After folding to a certain degree, you can remove the Tent fabric and place it on the ground;

5. Dry the dirt and water stains on the surface of the tarpaulin, and then fold them and put them in a dry place.

6. Finally, remove the top of the canopy, collect the brackets of the four feet, and push the inner Tube, so that the Tent is put away.

How to collect the camel brand automatic Tent

Step 1: Lift it with a solution, that is, the head of the Tent is lifted to lift the fixed head, unbutton the security buckle on the bracket, and fold the Tent.

Step 2: Press and one fold, that is, hold the bracket with both hands and press the bracket to reduce the Tent, and fold the four corners of the bracket inward in order. After the folding, the Tent is stored.

precautions for Camel Tent storage

1. In addition to cleaning the dust and attachment in time after use, the Tent should also wipe the water and gas on both sides of the fabric.This is very important.If it is stored without completely dry, it is easy to make the fabric mildew and adhesion.Affects the life of the Tent.

2. After the Tent is completely dry and folded, try not to put other items on the Tent, so as not to cause permanent fatigue at the bending of the waterproof rubber material to produce dehydration.

3. Take out the Tent to cool out the Tent regularly (avoid direct sunlight) for a long time and reorganize before folding and storage. This advantage is that it can prevent the mildew and adhesion of the Tent fabric, which can make the Tent bend the waterproof waterproofPressure strips will not produce permanent fatigue and extend the overall service life of the Tent.

Camel Tent recommended & gt; & gt;

2. After spreading it, use both hands to lift the Tent up

Step 2: One shake and press, immediately shake the Tent and let it open, and then press the head of the top Tent, and the Tent will hold up.

3. The jittering Tent is easily supported and adjusted

4. Press the Tent account pole down and fix it down

Step 3: One tie and one tie, that is, nails, tie the wind rope, and the Tent is built.

5. Adjust the size of the Tent and nail

6. Tie and pull the wind and wind rope (after seeing), fixed and stable

Second, the storage of automatic tents

Step 1: Lift it with a solution, that is, the head of the Tent is lifted to lift the fixed head, unbutton the security buckle on the bracket, and fold the Tent.

1. First raise the head of the pole up and lift the fixing

2. Ding the bracket safely and unlock it, and fold gently inward

3. storage: Unlock outward, unlock the vacancies when there is a vacancy

4. Unlock the eight security buckles on the bracket rod (two in one pole)

Step 2: Press and one fold, that is, hold the bracket with both hands and press the bracket to reduce the Tent, and fold the four corners of the bracket inward in order. After the folding, the Tent is stored.

5. Press and hold the sides of the bracket pole, press down inward and down, shrink the Tent

6. Fold the four corners of the bracket inward

7. Fold the four corners of the bracket inward and move closer to the center of the bracket

8. After folding, the Tent is closer to the center of the bracket, and the storage is good

3. How to press the schematic diagram of the Tent stent

In fact, the construction of the automatic Tent largely depends on how to use the bracket correctly. When the Tent is built, the bracket is pressed down and kept pressing to the end.

When storing the Tent, the bracket is lifted up, and the Tent is lifted together.

Today, automatic tents are widely used in family gatherings, friends outings, self -driving Camping, Picnic leisure, etc.To some extent, automatic building tents is not just a Tent, but also an advanced attitude towards life. A comfortable lifestyle. Take your automatic Tent to enjoy life outdoors!

What is the Decathlon Tent?

Decathlon comes from France. It is a retailer of sporting goods. It was founded by Michelle Leelec in 1976. The first store opened in the small village near Lille, France.In 2003, Decathlon entered China, and has now spread hundreds of home malls in 46 cities across the country.Provides the support of chain sports supplies and even the full sports industry chain, and has a wealth of its own brand product lines. According to different sports categories, it is divided into 20 different name brands.For beginners and professional movers, Decathlon can provide sportswear, equipment, and various creative sports products. The control model controlled by the entire industry chain makes its products highly cost -effective.In December 2018, the World brand Laboratory released the "2018 World top 500 Fortune 500" list, and Decathlon ranked 484th.From entry -level to sports products, Decathlon's own brand, that is, "passion brand", such as Quechua Outdoor mountain sports brand, B'TWIN bicycle sports brand, KIPSTA team sports brand, NABAIJI swimming brand, etc., Uses, design, explanation, and win love.

What are the categories of Decathlon tents?

1. Use in summer

It belongs to a single layer, which is quite ventilated. It is a kind of rhizon and a layer of nylon. It is quite ventilated and is a low -altitude Camping. It can resist light rain.The screen network, the bottom layer is nylon cloth, with external accounts, and the color will not make the inside too sunny and unbearable.

2. Three seasons use

Refers to the Tent used in the non -snow period, it is different from the camp column, which can resist strong wind and slight snow. Most tents have breathable nylon internal accounts and good waterproof foreign accounts.The layer is a gauze. The moisture inside the Tent can be revealed, and the account door is large. Such tents are suitable for three days to one week. It is best to open the camp terrain with forests or no excessive exposure.

3. Four seasons use

The material of the Tent is relatively hard, which can support snow and strong winds. The two -door types are easy to enter and exit camps in bad weather. The design of such Tent designs considers the problem of equipment and placement in the snow period and whether the internal and external account space is sufficient to cook.The snowstorm is snowing.

4. Use of high mountains

Most of the alpine airflows are quite vigorous. The pillars of the Tent must support and resist the bad weather. The Tent design must be suitable for the needs of climbing or Hiking, and the comfort is easily carried.

How to look at the quality of the Decathlon Tent

1. Look at the waterproof performance of the fabric. Generally, it is good to exceed 2000 water pressure.

2. Look at the waterproof sticker of the Tent. If the entire Tent has waterproof stickers, it will not leak water.

3. Look at the bracket of the Tent, the aluminum alloy bracket is strong and durable, and it will be more convenient when taking the Tent. The Tent of the glass fiber rod is heavier. When wearing a Tent, there will be a stuttering phenomenon.

4. Looking at the material of the Tent, the general Tent can meet the daily Camping requirements with 190T polyester cloth. However, some black -hearted brands use 180T or lower -level fabrics to impersonate 190T fabrics.

5. Looking at the workmanship of the Tent, is the sewing thread distance of 1cm? There are 3 stitches in the sewing thread, and whether the details are open and the bottom corner of the Tent is double -layer reinforcement.

6. Look at the buckle and zipper. Is the fastener or not? Or ynsybs, whether the zipper is YKK or 3F. It is best to use a rope at the tie's head. Do not use an iron piece.

What tents are good for Camping?

1. For example, Camping in the Park is just leisure and relaxation. What requires a sunshine and a Picnic cushion.

2. In the Camping place, it takes night, then prepare tents, moisture -proof pads, Sleeping bags, lamps, etc. with a certain rainproof effect.

3. If it is self -driving, in the countryside or camp, it requires large inflatable tents, inflatable sleeping mats, Sleeping bags, lamps, Camping boilers, portable dining tables, etc.

Decathlon Tent recommendation & gt; & gt;