What affects the price of chemical Fertilizers to affect chemical value value -added tax on Compound fertilizer prices

With the approval of the State Council, the Ministry of Finance, the General Administration of Customs, and the State Administration of Taxation issued the "Notice on the Recovery of the Following VAT" (Cai Tax [2015] No. 90), which stipulates that from September 1, 2015, the taxpayer is required to the taxpayerThe sales and imported chemical Fertilizers are uniformly levied VAT at the 13%tax rate.The calm Fertilizer market is no longer calm. This heavy news has become the most concerned topic in the Fertilizer industry.After the recovery of the value -added tax of chemical Fertilizers, what will change the price and market of compound Fertilizers?

Effect on Compound fertilizer prices

Effect on the price of Compound fertilizer raw materials

Taking the Shandong and its surrounding areas as an example, the complete cost of the traditional tobacco -free coal process is about 1,600 yuan (ton price, the same below).There is no "value -added" problem here.However, the complete cost of the aerospace powder gas gas -chemical technology Urea is around 1350 yuan. According to the above assumptions, the value -added tax is about 10 yuan. If it is passed on to the downstream, the price increase is limited.It is understood that more value -added taxes that can be credited by Urea manufacturers, so the recovery of value -added taxes should have a small impact on the current Urea market.

Taking the Hubei region as an example, 55%powder -shaped one ammonium general export price is 2100 yuan, and the full cost is about 1950 yuan. It is necessary to pay a value -added tax of about 20 yuan.Yuan, received a value -added tax of about 26 yuan.According to some dizen ammonium companies, if the profit remains unchanged, it is expected that the price of ammonium phosphate should rise by 50-100 yuan, and the increase will be about three %.Therefore, the recovery of VAT's recovery has little effect on the price of ammonium phosphate.

The most increased cost of Potassium fertilizer and the most impact is Potassium fertilizer. Due to the lack of input deductions, the value -added tax will increase its cost significantly, which will cause the sales price of potassium Fertilizers to increase significantly.The cost per ton of potassium chloride is at least 150-180 yuan/ton.

Impact on the cost of Compound fertilizer:

Recently, raw materials Urea and ammonium phosphate are temporarily in a state of weak operation, and even the price is still falling. Even if Compound fertilizer value -added tax is recovered, the two shall have a large impact on their costs.It is concluded that if the cost of Potassium fertilizer increased by 258 yuan/ton or even more due to the reasons for the recovery of VAT in the later period, the cost of 45%chlorolyl and sulfur -based Compound fertilizer was increased by at least about 64 yuan/ton per ton.Therefore, after September 1st, the quotes of Compound fertilizer may increase, but according to the different situations of each enterprise, the price increase should be different., Large profit, more value -added taxes, and relatively high cost of small enterprise raw materials, small profits, and relatively small value -added tax, but the difference should not be too large.There are also factors that some companies are not optimistic about the market, or limited downstream acceptance, etc., and expressed their concerns that they would increase their own digestion.Therefore, the increase in the quotation of Compound fertilizer after September 1 may determine the price trend of potassium Fertilizers mainly. At the same time, it is necessary to pay close attention to whether the state -deductible policy and the value -added tax in import and export are new.

After the first round of the autumn fat in early August, it can be seen that the enthusiasm of the downstream dealers' payment and picking up the goods is not good, and this year's crops are low, farmers have poor enthusiasm for planting Wheat, and the mood of watching is strong. Before September 1st, September 1stThere are still a lot of market demand space.Once the news of the value -added tax news on August 10 is implemented, all aspects of the Fertilizer industry will be affected. If the price of raw materials is raised, the production cost of Compound fertilizer manufacturers will increase.Once the news is released, this will undoubtedly make the current weakness of the fat market in autumn improve, and the psychological psychology of downstream buying up and not buying and falling will reappear again. At the same time, in mid -to -late August, the demand for Fertilizer preparation in the second round of autumn is released again.The "good market" will come in advance, and in order to avoid the increase in the later period of tax costs, some manufacturers will inevitably introduce some offers such as picking up subsidies to stimulate downstream active pick -ups and strive to minimize corporate Compound fertilizer products and raw materials.Inventory, so before September 1, the peak of Wheat Fertilizer sales will come early.However, before September 1st, the demand for Fertilizer preparation of the downstream Wheat market will basically be met. After September, the market demand has only a small amount of replenishment space.It is very large. It may have a certain degree of impact on the overall price of Compound fertilizer when the fed Fertilizer demand is launched on the occasion of the tail sweeping of the tail cleaning in autumn. At that time, the overall price consolidation will become the main theme of each enterprise.In the long run, it is inevitable that the return of the Fertilizer industry to the market is inevitable. The resumption of value -added tax on the recovery of value -added tax indicates the determination of the government's simplified administration and decentralization of power and regulating the development of the industry with the market.The problem is controlled, and the backward production capacity of small business scale and poor performance will face the elimination situation. The industry leaders with standardized operation and good performance will be favorable in terms of market and resources.Although there are more profits in the short term, in the long run, while the reform brings challenges, opportunities must be with them. Grasping opportunities and innovation optimization in reforms are the foundation of development.

[Calcium, magnesium phosphorus Fertilizer] The role and purpose of calcium magnesium phosphorus Fertilizer chemical calcium, magnesium phosphate Fertilizer

Calcium and magnesium phosphate Fertilizer is a raw material prepared by phosphate and magnesium silicate minerals. It is melted at 1350 ~ 1500 c in electric furnaces, blast furnaces or flat furnaces.After becoming a product.Calcium and magnesium phosphorus Fertilizer, also known as melting magnesium phosphate Fertilizer Fused Calcium-Magnesium Phosphat (Fertilizer), is a silicon aluminate vitreous containing PO4 3-).The main ingredients include CA3 (PO4) 2. Casio3, MGSIO3.It is a variety of Fertilizers. The aqueous solution is alkaline. It can improve the acidic soil. When cultivating large seedlings, it can be used as a base Fertilizer. The plant can slowly absorb the required nutrients.

Calcium, magnesium phosphorus Fertilizer chemical formula

Calcium magnesium phosphate Fertilizer is a mixture, a variety of Fertilizers. The aqueous solution is alkaline and can improve the acidic soil.GB20412-2006 Calcium Magnesium Phosphorus Fertilizer

The role and purpose of calcium magnesium phosphorus Fertilizer

Calcium and magnesium phosphorus Fertilizer is gray-green or gray-brown powder, with a phosphorus content of 12%to 18%. The main component is that it can dissolve citric acid -CA3 (PO4) 2, and also contain elements such as magnesium and small silicon.Magnesium is beneficial to the formation of chlorophyll (the important component of chlorophyll molecules is C55H72O5N4MG and C55H70O6N4mg), and silicon can promote the growth of crop fiber tissue, so that plants have better ability to prevent inverted and pests.When cultivating large seedlings, it is effective as a base Fertilizer, and plants can slowly absorb the required nutrients.

How to apply calcium, magnesium phosphorus Fertilizer

(1) Most suitable for base Fertilizer.After calcium and magnesium phosphorus Fertilizer is applied to the soil, the phosphorus can only be dissolved by weak acids. It must be used through a certain transformation process to be used by crops.Generally, we must combine deep cultivation, and the Fertilizer is evenly applied to the soil to mix it with the soil layer to facilitate soil acid dissolving and the absorption of crops.

(2) High -quality Organic fertilizer mixed with high -quality Organic fertilizer with more than 10 times or more. The prepared Fertilizer can be used as base Fertilizer, planting Fertilizer, or dipped in seedlings.

1. How much is a pound of konjac seeds?

The price of konjac seeds is about4~6A pound around the yuan, but there are differences in different prices such as the quality, variety, origin and market of seeds.In fact, the "seed" of konjac is not the seeds of botanicals. The formation process is very special. The "seeds" of konjac "seeds" with sexual reproduction are a typical non -sex organs -small spherical, seed first and second generationDifferent prices, the price of different places is different, and the price is large.

2. Where can I sell konjac seeds

There are farmers' markets or seed stores.

Konjac is cold, Xin, toxic; can promote blood circulation and stasis, detoxify and swelling, wide intestines and laxatives, phlegm and softness; Indications to lower blood pressure, blood sugar, phlegm nucleus, damage and bleach, stasis, stomach pain, sore throat pain, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gumsSymptoms and other symptoms.In addition, konjac has the effects of calcium supplementation, balanced salt, clean stomach, intestines, detoxification and other effects.

The grape glycosan with the largest content in the konjac has a strong expansion power, and has more than any kind of plant glue.You can fill the gastrointestinal and intestines to eliminate hunger, and because the heat it contains is minimal, it can control weight and achieve the purpose of weight loss and bodybuilding.

Konjac contains a gel -like chemical, which has the magical magic of anti -cancer and cancer.As long as the mature konjac is separated by simply extraction, it is made into a konjac fine powder, and the fine powder is added to the water, and the konjac gel can be produced.After being eaten into the body, this gel can form a translucent film coat, which is attached to the intestinal wall, which hinders various harmful substances, especially the absorption of carcinogens."Anti -Cancer Demon Cloth".

Konjac also contains a natural antibacterialin, which uses konjac fine powder as the main raw material. After making foods with other raw materials, konjac can form antibacterial membranes on the surface of the food, which can prevent bacterial invasion, extend the storage time, and play fresh and anti -bacterial bacteria.effect.

Third, the cultivation of konjac

1Soil: Konjac requires deep soil layers, loose and fertile, and neutral sour sandy loam planting rich in organic matter and humus.pH (pHAlkaliCurefor6.5~7.5GenerallypH5.5~6.5orpH7.5~8Both can grow.

2Humanity: Konjac requires good soil drainage, low groundwater level, and soil water content50~65%The sandy loam, the relative humidity of the air55~70%The annual rainfall is1000~1500Millimeter.

3, Temperature: Mochia fertility requirement for temperature15~25, exceed35growth is suppressed, lower than12The upper part of the ground is naturally poured, and the dormant period can be patient-5, lower than-8The lump of the ground is frozen.

4Light: Konjac is a shade -resistant crop. It is most afraid of light and direct shooting. It requires that the sunshine intensity is weak, the time is short, and the most suitable light intensity developed on the ground is sunlight.1/3The root development requires dark light.

Fourth, how to plant konjac seeds

1Following land fertilization: After the konjac is selected, the land is deeply cultivated once in autumn and winter. When farming, it can be combined with farming home Fertilizer according to the actual situation.1Mi Baogou,15~25centimeter.

2Plant taro selection: Select the seeds of konjac seeds to choose a small and shallow barogy nest, full ball stems, thick top buds, and the upper part of the tuber1The traces of the circle or falling off the roots of the beard, the lower and the bottom surface and the bottom surface, no root, no wrinkles, no scars, no injuries, weight is in300Gramm.

3, Plant taro disinfection: Monaco seeds should be used before sowing1000The agricultural chain -soluble powder of the units of 10,000 units to the water20kilogram(1000ppm)Soaked taro0.5~1Take it out and dry it after hours1~2God, this can reduce the occurrence of diseases.

4planting time: Konjac seeds are generally treated10Cm earthen temperature stable12Sowing only above , according to the climate of various places, it is usually in various places3It is advisable to be from the beginning of the month to late April, and it can be planted before the winter at the latest.

52. Sowing method: When the konjac is planted, the two lines of adjacent rows should be staggered and placed.45In the diagonal gap, the slope is budding upwards, and the taro is the root -shaped stem. The top buds are continuously placed in one direction, and then covered with soil.

Five, the planting management of konjac

1Cover management: After the konjac is broadcast, it should be vigorously collected by various crops, horn, shells, dead leaves and other coverage to meet the standard of "grass can not be made, and the ground is not exposed".2000About a catty,9After the month, pay attention to removing unwroded covers.

2Clear weeds: The root of the konjac roots is shallow. In order to prevent the young and tender root system and underground stems that are developing in the middle of the cultivation, it will affect the normal growth of the plants. You can use manual removal of weeds.On the surface, to prevent pressure from underground root stems.

3Clear ditch to cultivate soil: Konjac is afraid of drought and should not be impregnated. Therefore, the planting fields should be checked in the ground after the rainy season, especially after heavy rain, and drainage water to ensure that the water roads are Smooth.Combined with the Qing ditch, the fine soil inside the ditch is cultivated into the ridge surface.

4Scientific Fertilizer: Monacon topdressing is mainly to apply rotten dung water when leaf exhibition leaves. You can also apply dried pork dung slag to the soil to absorb the roots of the konjac roots between the plants.Following pursuit, Compound fertilizer with insufficient bottom Fertilizer.

Six, the diseased and insect prevention of konjac

1soft rotten

[Symptoms] Affects petioles, ball stems and leaves. After the victim, it tissue black, softened, and emitting a smelly odor, and even the fruits were rotten and inverted.

[Prevention] Strengthen the management of cultivation, regularly cultivate rectification, drainage and ventilation. When choosing seeds, carefully select non -rotten, wound -free taro, and soak the agricultural linolentin solution of appropriate proportion before sowing.

2White silk disease

[Symptoms] Affects the base of the petiole, which will cause damage to the petiole or ball stem.

[Prevention] Strengthen management and timely eliminate stagnant water, do not connect with peanuts, eggplant and soybeans, and use the proportion of Bordeaux liquid to switch to the spray of the petiole and the soil surface when the konjac fluid is switched to the bulb's stem expansion.disinfect.

3Leaf blight

[Symptoms] Harmly leaves, the infection ability of the germs is extremely strong, causing the konjac to wither and die.

[Prevention] The prevention and governance measures of leaf blight are basically the same as soft rot.

4Pest

[Symptoms] The insect pests that affect the growth of konjac are mainly Sweet potato moths, konjac lineworms, and bean moths.

[Prevention and treatment] Remove weeds and dead leaves during winter and spring, use konjac and corn for field sets. It can also use artificial insecticides to remove insect pests, and pay attention to choosing rotten farmhouse Fertilizer when using farmhouse Fertilizer.

[rice species germination] Points of rice seeds soaking germination technology point Points of rice seeds precautions precautions

The main points of rice seed soaking germination technology

rice seeds need to be exposed to planting for 2-3 days before soaking to improve the germination and germination rate of seeds.However, it is not advisable to grow on the cement floor and slate.When soaking, seed disinfection should be performed, and then soaking.rice seeds are soaked in water soaking. If you really need to be soaked in static water, you must be squeezed or changed at least twice a day.Generally, early rice is soaked for more than 48 hours, and medium and late rice must be soaked for more than 36 hours.

After soaking, the buds are mainly grasped, mainly at high temperature (35 C -38 C) breaking the chest, the temperature (25 C -30 C) long buds, low temperature (normal temperature) dry buds to practice buds.The temperature and water of the valley species are adjusted in the method of leaching temperature and covered with closed coverage, and the temperature and humidity are uniform in the inside and outside of the valley piles in the piles, which makes the buds and roots be consistent.The criteria for germination are half a grain of buds and a grain of root.

1,Expose

Select the seeds one week before the routine rice seeds soaking6 to 8 hours, then put the sun -exposed seeds in a dry and cool place to cool the heart to promote the breathing effect and enzyme activity of the seeds, which is conducive to improving the seed germination rate and germination potential;Bacteries attached to the rice shell.However, do not expose the hybrid rice seeds before soaking. After the exposure is seeding, the germination rate is generally reduced by 5%to 10%. The negative impact on the seeds with weak living power is greater.

2,Seeding

Select the seeds with water, remove the floating on the surface, and choose a full rice seeds to cultivate neat and strong seedlings.

3,Promote living water soaking

It is not easy for the planting time, it is best to useThe method of "daily immersion and night dew" is to soak the seeds during the day and remove it at night. It is best to put the seeds in the flowing water for 6 hours when soaking (if there is no flowing water for about 4-6 hours, it will be changed once every 4-6 hours).To eliminate the direct soaking of the old (old) for 48 hours.

Adopting intermittent soaking methods: the best time for conventional early rice soaking33-35 hours, more than 48 hours are not conducive to seed buds and germination rates.(The specific soaking time depends on the temperature and water temperature, and the seeds are used to suck water.seeds have suck water).Miscellaneous early rice should be used to decline, intermittently immersion method, and avoid continuous soaking for a long time.The process of rice soaking in rice is the water absorption process of the seeds. After the seed absorption, the activity of the seed enzymes begins to rise. Under the action of enzyme activity, the embryo starch is gradually dissolved into sugar, releasing the nutrients required for embryo roots, germ and embryo axis.When the rice seeds absorb water to the valley weighing 24%, the embryo begins to spare, saying that it is broken or dew.When the seed absorption reaches 40%, the seeds can germinate normally. At this time, the water absorption is the saturated water absorption of the seeds.When the amount of water absorption is reached, on the one hand, due to the water temperature of the soaking, the higher the temperature within a certain temperature range. The faster the seed absorption, the shorter the water absorption time.On the other hand, it is affected by rice varieties and combination types.Due to the strong activity of hybrid rice water absorption, the soaking time of hybrid rice seeds is shorter than the soaking time of conventional rice seeds.

4,Promote pharmaceutical soaking

It is recommended to use potion soaking, except for coating seeds.Water soakingAfter 6 hours, the bacterial spores attached to the seeds moved, and then the pharmaceutical sterilization was performed.At present, the commonly used potions are 25%fresher 2000-3000 times liquid (that is, 5 kg of 2ml of water, 4-5 kg of planting 4-5 kg) for 6 hours.Or use 500 times strong chlorine essence (2 grams of strong chlorine essence and 1 kg of water) for 6-8 hours, the disinfection solution should be higher than the surface of the seeds (do not change the water during disinfection), and then repeatedly rinse the rice seeds with water repeatedly.Rinse the residue solution.

5.Sprout

At present, many farmers like to put seeds in woven Bags to germinate, and even because the temperature cannot come, the seeds are exposed to the sun, which often causes burning buds.The best and easiest way is to use double -layer, disease -free, and moist sacks to germinate, put a layer of diseaseless straw on the ground, spread a sacks, spread the seeds evenly, and cover the other sack on it.Just pay attention to whether to add water.You can also put a sack or a relatively ventilated woven bag, and you can use straw to keep the insulation.After the valley species is heating, the control temperature is in35-38 C, the temperature should be piled up with too high temperature, and measures should be taken to improve the pile temperature.After about 20 hours, the grain can be exposed.The temperature is normal in mid -to -late May, and the daily immersion and night exposure method can be used to germinate normally without the need to add insulation materials.

6.Refining

Before sowing, spread out the germination of germination at room temperature to refine the budsSowing after 3 to 6 hours.Make valley species adapt to air temperature and improve the seedling rate.

7.Sow

After the grain species is dew, the temperature is adjusted toFrom 25 to 30 C, the temperature can be promoted to the roots. When the buds are half a grain of valley and 1 grain of the roots, the lower fields can be sown.

precautions for rice seed germination

1,Flip it every day when germination1-2 times, the temperature of the seeds is uniform, the temperature of the upper and lower, the temperature is uniform, and the germination is neat.

2,When germination, you must pay attention to temperature changes, prevent and control high temperature burning, exceed40 C seeds lose their germination.

3,seed85%broke the chest, reduced the temperature to 25 C, the buds and root length were controlled within 2 mm, and the plant was spread out.

4,After breaking the chest, proper water replenishment, pay attention to the ventilation and oxygen, you can urge the strong bud.

5.According to their respective production plans, the germination, sowing in a timely manner, and controlling the seedling age in3.5 Leaf age, prevent small seedlings in the early stage, and insert large seedlings in the later stage.

[How to plant lavender seeds] Lavender seed planting method Lavender seed planting time

1. How to plant lavender seeds

1. Container selection

The seeds of the family sowing lavender can be replaced with short small Flower pots or other containers.For example, a yogurt box stabs a few small holes with an awl at the bottom of the box.One -time plastic cups are also available, but because it is transparent, it is best to use black paper paste or put on a paper cup (if the root of the plant is exposed to the sun, it will affect growth, and the soil is prone to green moss).

2. Plant selection

The seeds of lavender are relatively small, and the sprout rate is low. Therefore, the soil for sowing needs to be loose, breathable, high in water, and sufficient disinfection.Earth can be mixed with vermiculite, peat, water moss, perlite, snake wood chips, etc.If possible, configure it yourself.

3. Soak warm water -the key to improving the germination rate of lavender seeds!

The seeds of smoked grass should be soaked in 40 degrees of warm water.After water cooling, continue to soak for 24 hours.This is easy to germinate.

4. Sowing method

Generally, the seeds are slightly larger (such as sailing and sage), and 2 ~ 3 capsules can be broadcast in each container.After germination, the growth of small seedlings leaves a stronger plant.The seeds are small (such as Mariolan), which can be scattered.Stick some seeds with your hands and sprinkle it gently on the soil.Seedlings after germination.Leave 1 to 3 small seedlings as appropriate.

5. Cover the soil

The thickness of the seeds depends on the size of the seeds.Generally 2 to 3 times the diameter of the seeds.Small seed soil should be thinner, and lavender seeds can be covered with thick soil.Some seeds are shining strong and can not be covered with soil (such as bee -bee, Midian).

6. Moisturizing

After sowing, you must pour water.Watering should be watered with a thin prayer.Can't force the seeds to avoid impulse seeds.It is best to use the basin method to use 2/3 pots of water to sit in the pot.Let the bottom holes of the water vessel penetrate long.(The water level in the large pot should not exceed the height of the container's middle soil.) After sowing, cover the plastic wrap on the container, and a few small holes are breathable on the plastic wrap.Put the container in the sun and keep the temperature about 20 degrees.Most seeds can germinate after a week.

Lavender seed planting time

1,seed breeding: Lavender seeds are small, and seedlings should be transplanted.Choose spring in the sowing period, and the warm areas can be every year.3~6Monthly9~11Monthly, the cold area should be4~6Monthly sowing can also be sown in the greenhouse winter.Bud day14~twenty onesky.Subcontracting temperature:18~twenty four.After germination, appropriate light is needed, and the weak light is easy to grow.Due to a long dormant period, seeds should be soaked before sowing12Hours, then use it20-50ppmGibberein soaking2Sowing for hours.Before sowing, flatten the land, pour water through the water. After the underwater seeping, sow the seeds evenly, and then cover a layer of fine soil. The thickness is0.2Cm, cover the grass or plastic film to keep it.Keep15~25, the seedbed is required to be moist, contract10The sky is emerging.If you do not use gibcotin, you can germinate for one month.Below15C needs1~3Gel.Pay attention to water spraying during the seedlings.10It can be transplanted at about centimeters.

2As well asCutting breeding: cuttings are generally carried out in spring and autumn.Cuttings in summer.Cuttings medium available2/3Coarse sand mixed1/3Pattius.Choose a good plant that develops and prosperous, and select a short -rigid and unpaid annual semi -wood branch bud at the top8~10cmTrimchie the spike.The incision of the cuttings should be near the stem, and strive to Smooth it.Bottom2Remove the leaves of the festival, insert water2Cut the soil later in hours, appointment2~3The roots will be on the week.Optional8~10cmThe annual branches are well drained and kept moist.20~twenty fourUnder the condition of bed temperature, the appointment40Take root around the sky.Do not use the top buds that have appeared in the inflorescence, because the blooming branches have aging, and the adverse root will affect the future growth.Cuttings of the ground, make a whole land.After pouring the water, cover the membrane and cut it immediately.deep5~8Centime20~25cmEssencePay attention to improving ground temperature and promote the development of the root system; trim and extend the branches, remove the spikes in time, promote branches, and cultivate strong seedlings.Plants60cm, Line spacing120cmEssenceWater after planting.

3As well asSub -breeding: can be carried out in spring and autumn, use3-4New Year's Plants, in spring3-4Monthly uses the old root to divide, each with bud eyes.

2. Management after germination of lavender seeds

After germination of lavender seeds, the plastic wrap can be removed.The seeds are small, you can wait for the small seedlings to be slightly stronger before taking it away.

Third, lavender upper pot

After the lavender seeds germinate, the seedlings can be put on the pot after 4 ~ 6 real leaves.In the beginning, use a small basin.When the seedlings grow up, change the big pot as appropriate.When you change the basin, you should wait for the soil to change it (because you need to water it after changing the pot. If it is damp, the humid time is too long, and the seedlings are prone to poor growth).Add more than half to the small basin first, and have a certain amount of Fertilizer cultivation soil.In order not to destroy the root system, no need to shake the soil near the root during transplantation.Move it directly into the small pot, and then add the soil to the root.After transplantation, you must pour water and cover it for a few days.Then you can put it in the sun.

Fourth, the daily maintenance management of lavender

Soil -the guarantee of improving the germination rate of lavender seeds

Lavender seeds are suitable for slightly alkaline or neutral sandy soil.The drainage requirements are good. You can use 1/3 of pearls, 1/3 vermiculite, and 1/3 of peat moss.If you are cultivated in the open field, pay attention to the drainage of the soil.

Watering -daily management of lavender planting

Smoral grass does not like the roots that often stay in water.After watering through water, water should be given when the soil is dry, and the surface should be cultivated on the surface.Watering should avoid the sun. Usually in the morning, the water cannot splash on the leaves and flowers, otherwise it is easy to rot and breed diseases.The continuous and humid environment will cause the roots to not breathe enough air breathing and poor growth, and even suddenly the whole plant dies. The reason for the failure of the cultivation of smoked grass is often here.

Light -Lavender Health Guarantee

Lavender is a full -day plant. It requires sufficient sunshine and wet environment. It can give a full -yield environment better, and half -sunlight can also grow.In summer, it should be covered at least 50%of the sun and increases ventilation to reduce the environmental temperature. Although it grows weak, it will not die.In winter, the grass can grow well in the flat ground, and it should be cultivated under the sun.

Temperature -the key to lavender planting

Smoral grass is warm in winter and cool in summer. The growth is suitable for temperature: 15-25 C, which can grow at 5-30 C.Long -term higher than 38-40 top stems and leaves.The temperature is too low below 0 C and starts to sleep, and the low temperature of the seedling-20 -25 when dormant.

Fertilization -Make you planted lavender more robust

Fertilization can be placed in the pot soil as a base Fertilizer, usually once a quarter.

Pruning -Let you get more from lavender

The essential oil content of smoked grass flowers is the most abundant. When used, it is mainly based on flowers or inflorescences. For the convenience of harvesting, some small inflorescences in the early stage may wish to be leveled with large scissors.Some varieties can reach 90 cm in height, and this method also uses this method to make the plants low in promote multiple branches and flowers, and increase gains.After the flowers are pressed, the plant must be trimmed to 2/3 of the original, and the plant type will be stronger and conducive to growth.It is generally in spring when trimming, and trimming in autumn will affect cold tolerance.The last thing to note is not to hurt the wooden part of the murmurry during trimming, so as not to die.