1. What are the raw materials for mechanical charcoal

Mechanism charcoal, aliasing mechanism charcoal, artificial charcoal, recycled charcoal, smoke -free cleaning charcoal, is a charcoal rod -shaped material squeezed by wood squeezing materials. Internationally, it is publicly regarded as green and environmentally friendly products.The density of mechanism charcoal is close to coal, which is more than three times that of ordinary charcoal, and smokeless when burning. It is mostly used for barbecue charcoal. Industry can also be used in the production of mi -molized charcoal and steel smelting or serving as boiler supplementary fuels.

The raw materials of the mechanism of charcoal have a wide range of raw materials, and the rice shells, peanuts, cotton shells, corn cores, corn stalks, sorghum stalks, bean stalks, sawdust, wood chips, granular shells, coconut shells, and coconut shells can be used to produce mechanism charcoal., Shave, bamboo dandruff, and rice shell are relatively good production materials.

2. How can the mechanical charcoal be ignited quickly

Mechanical charcoal ignition takes a certain time. If you master the correct method, you can shorten the time. The ignition method of the mechanism of charcoal is:

1. Flexible solid fuel block

Although liquid alcohol and gasoline fire quickly, it is not safe and the cost is relatively high, and the solid fuel block is much more convenient. Generally, it can be purchased from outdoor products, barbecue restaurants or sales of charcoal.You can buy online.By fire with solid fuel blocks, pay attention to ventilation. First, smash some small pieces of mechanism charcoal, and then find some small wooden sticks to put it into a shelf, put the mechanism charcoal, and wait for the wooden blocks to be flickered after the wooden block is completely burned.

2. Blind charcoal

The fire charcoal is specially used for fire, which is particularly easy to burn, but the disadvantage is that it is large, it is easy to stain the hand, and the price is not cheap, and the practicality is not very strong.

3. Wooden block fire

Just find some pine blocks and bamboo sticks, split into small pieces and stack it, leave a little gap, then lit the wooden blocks below, and put a few mechanism charcoal.It should be noted that artificial synthetic materials such as plywood should be used to avoid harm of chemical release.

4, point charcoal stove

It is specially used to give the mechanism for charcoal and round charcoal. The carbon method is to ignite the liquefied gas.

Reminder: Don't forget to prepare a bucket of water or fire extinguisher when igniting to avoid accidents.

Third, the mechanism of charcoal and fruit charcoal is better

1. fruit charcoal

fruit charcoal is the fuel that has been burned, distilled and other processes after the logging of the log, and the common fruit charcoal on the market has apple wood and litchi wood. The advantage is that it is easy to ignite.Taste, the taste of baked is particularly fragrant.

2. Mechanical charcoal

Mechanical charcoal is a charcoal made of charcoal machine. Because the carbon content of the mechanism is high, the density is large, and it belongs to waste use. Therefore, compared with the fruit charcoal, the mechanism charcoal is higher temperature, combustion -resistant, and environmental protection.The disadvantage is that the ignition point is high, it is difficult to ignite, and it is easy to fire.

In general, these two types of charcoal have their own advantages and disadvantages. When barbecue, you can choose according to the grilled ingredients: if you bake things are vegetables, you need to brush a lot of oil, then Maigoo Xiaobian recommends that you use fruit with fruit.charcoal, because the temperature of fruit charcoal is lower, the oil droplets are not easy to get angry; if it is baked, it is recommended to use mechanism charcoal, such as roasted whole sheep, because the mechanism of charcoal is high -temperature flame -resistant, and the efficiency is higher.

Introduction to the card furnace

Card furnace refers to non -fixed home kitchenware, hotel supplies, and Outdoor leisure supplies that can also be heated by fuel that can also be used in gases such as butthlate as the main gas and liquefied gas.Card furnace is also called a portable butanal stove; a portable Barbecue oven is a kind of kitchenware that has just been raised in recent years. It is mostly used for home Outdoor leisure and hotel supplies.According to the shape, it is mainly divided into monocular, double eyes, mini and ultra -thin and single -and -single card stuck furnaces.

DeckIt is also called portable butanal furnace; it refers to non -fixed cooking kitchen utensils that use fuel and liquefied gas as the main gas and liquefied gas as the main gas, liquefied gas, etc., and are mostly used for home Outdoor leisure and hotel supplies.

Card furnace historical development

(1) Starting stage (2002-2003Years): The product structure is simple, the function is single

Before the twentieth century, the development of China's card -type furnace industry was rarely developed. The popularity of Outdoor leisure of domestic citizens was very low. Few people would think of a kitchenware that is convenient for carrying Outdoor or non -fixed and easy to carry.until2002Years2003In the past two years, there were only one or two companies in China developed the card -type furnace.And the product structure is simple and single.In addition, the consciousness of domestic Outdoor leisure has not yet emerged, so the development is average.

(2) Development stage (2003-2009Years): Duration and reliability increased significantly

2003After the year, with the continuous enhancement of national leisure consciousness, the market economy of the card furnace has risen, and various card furnaces in foreign countries have entered China.The product quality and appearance of the card furnace have changed, and the variety and functions of the product are constantly changing.During this period, the panel, combustion system, and ignition device also improved.The panel material has cold plate spraying, the burner has an aluminum stove, a copper furnace head, plating or zinc spraying on the surface, the regulator has a rotor valve and the screw valve.The durability and reliability of the gas stove has improved.

(3) Breakthrough stage (2009Year-2012Year): There are many varieties and complete styles

2009After the year, the Chinese card furnace industry has entered a stage of rapid development.The introduction of foreign advanced card furnace development and manufacturing technology has brought breakthroughs in China's card -type furnace industry.There are increased varieties, enhanced measures, novel materials, and improvement in safety, function and performance.In terms of production quality and reliability, level of process, automation and intelligence, the advanced nature of performance indicators, energy saving and environmental protection, and safe use.The regulator of the card furnace basically eliminated the screw valve.The safety of the rotor valve card -type furnace, the exquisite and exquisite appearance of the appearance, the heat -resistant furnace shell and pot frame, the piezoelectric ceramic ignition tens of thousands of times, the perfect printing process is the mainstream of the current card furnace market consumption

In recent years, my country's card -type furnace industry has developed rapidly. It has already owned several Chinese brand card -type furnaces that have been recognized by the state, as well as several foreign companies such as veins, rock valleys, and Shenqi. Domestic enterprises.

Card furnace classification

There are many categories of card furnaces, basically single -eye, two eyes; single, dual -use; ordinary, ultra -thin, mini types of these categories

Single -eye, two eyes

From the classification, we can see that this type of classification is mainly distinguished by the number of burning eyes of the card furnace. Some of the market only have monocidal and two eyes.Different and Burning eyes

Single -purpose, duplex

The distinction of dual -use use is that the inlet device on the regulator is different. Single -use card furnace is only applicable to installing butane gas cylinders for applications. Dual -use card furnaces are available for single -purpose functions.Family -based liquefied gas burning.

Ordinary type, ultra -thin, mini

This category is a category of appearance volume. It can be seen literally that the ultra -thin type is the low height of the shell, the mini type is smaller, and the normal type is a card -type furnace on the market.

Card furnace working principle

When the card -type furnace is working, the buttane gas enters the regulator from the butanane gas cylinder, and the regulator is adjusted (the user is adjusted by the knob) into the furnace head, and the air is mixed with a part of the air (this part of the air is called one at one time.Air), these hybrid gases are sprayed out of the fire holes of the fireware to ignite the flames at the same time to form a flame (the air required when burning is called secondary air).Essence

Card furnace ignition method

There are two types of ignition of gas stoves: electronic pulse ignition and piezoelectric ceramic ignition.

Card furnaces are mostly used for voltage ceramics. The biggest advantage is that no battery is required.However, the success rate of ignition is related to the environmental humidity, and it is not easy to order when the humidity is high.In addition, when igniting, you need to hold the switch to get angry, without electronic pulse ignition.Of course, the success rate and ignition of voltage ceramic ignition also depends on the quality of the magnetic needle. Good magnetic needles can ignite tens of thousands of times or even more. Generally, the magnetic needle with poor quality may only be ordered.

Is the card -type furnace safe?

Most of the card furnaces on the market now use the pressure sensing of the valve body and the gas cylinder through the regulating valve, and the corresponding movements of the explosion -proof rod in the regulating valve through the increase in pressure.Without the adjustment of the explosion -proof device of the regulating valve, it may cause an explosion due to the high pressure in the gas cylinder and the regulating valve. When there is a safety device, the pressure is too high.The hidden dangers caused by touching the entry of the gas cylinder lever or cutting off the import and export of the gas source to stop the pressure from continuing to rise.

As long as you can use it correctly, the card furnace is absolutely safe.The country has no prohibition of use of a card furnace.

When dining, consumers should try not to operate the portable heating furnace without authorization.At the same time, if the gas in the stuck furnace gas is not used up, it is not safe to discard it at will.It is recommended that users can use the card -type furnace to turn on the switch, do not ignite, and discharge the gas in the gas tank before processing.The general card -type furnace gas is equipped with butane. Although there is no clear regulation for the useful life, it is recommended to2to3Used during the year, it is not used for too long, it is not recommended to use it.

Forbidden to use a portable stove on an induction cooker, do not put it on a table equipped with an induction cooker, because high temperature may cause a portable gas cylinder to break.

The tank of the Gas furnace gas tank is thin. When it encounters pressure or hard objects, it is prone to damage and cause air leakage.Once the leaked gas encounters an open fire, it will explode and cause damage to the user.

The card -type furnace of the general brand is built into a safe explosion -proof device to prevent the air tank from dislocation device. Boil hot pot. The barbecue is absolutely first -class. Instead of indoor, Outdoor must be handy. In fact, it is not too different from the cooking of home gas stoves.The stove is more convenient.

It is safe if it is used normally. It is recommended that you choose a big brand furnace when buying.I am afraid that the card -type furnace explosion is actually a misunderstanding. As long as the operation is correct, it is absolutely safe, otherwise it is not even more unsafe with such a large gas tank at home.

Causes of Card furnace Explosion

1. The tank of the gas stove gas tank is thinner. When it encounters pressure or hard objects, it is prone to damage and cause air leakage.Once the leaked gas encounters an open fire, it will explode and cause damage to the user.

2. In the case of the heat source, it is prone to expansion and cause explosion, so you must stay away from the heat source.

3. Due to the high pressure in the gas cylinder and regulating valve, it explodes.

4. High temperature may cause a portable gas cylinder to break.

Card furnace purchase matters

1, Choose the choice of location

Buying a card -type furnace should be purchased from offices, large shopping malls and sales companies in professional stores, large shopping malls, and sales companies. Do not want to buy it for convenient or cheap price at the stalls or shops, let alone buy "three -none" products.Do not forget to ask for regular invoices after purchasing, and save warranty vouchers and invoices, otherwise the quality problem users are helpless.

2, Look at the packaging, look at the appearance

The packaging of the card -type furnace reflects the quality of the product to a certain extent.The qualified deck furnace should be neatly packed, exquisite printing, and complete logo.

Open the packaging, the appearance of the card -type furnace should be beautiful and generous, and there is no collision everywhere in the body.The overall structure of the card -type furnace should be stable and reliable. The stove surface should be Smooth and flat, without obvious warning, and the installation of the components must be firm and reliable, and there must be no loosening phenomenon.

The parts and components are finely machined, the connection part is firm and reliable, the pot bracket should be stable and firm, the components of the inferior card -type furnace are rough, and some even have obvious air holes and sand eye on the airway system. This not only affects the normal use of the cooker and is easyCauses personal injury accidents.Because the production enterprises of inferior card -type furnaces are rough, cutting corners, and original rough assembly process, the stove parts are loose, the parts do not cooperate, the valves or knobs are not flexible, the stove's strength is not enough, the stove surface deformation is severe, the stove is warpedQu and other.

4On -site ignition test

When buying a card -type furnace, not only depends on the quality of the appearance and other processing, but also the ignition test.If there is no test fire in the store, try the fire in time after buying home. If it is not easy to use, it should be returned in time.When trying the fire, the electric ignition device should be flexible and reliable, and the ignition continuously10S times, at least there should be8Two times, the flame should be here4The whole fire eye was spread in the second, and there was no degeneration.The blue flames appeared, the inner and outer cone in the flame was clear, no fire, no dead fire, and basically no yellow fire.The ignition and extinguishing noise of the flame should be small.Otherwise, the burning of gas is insufficient, and carbon monoxide exceeds the standard, which harms human health.

5The amount of weight

The stove is weighted by hand, and the products that meet the standards have sufficient weight due to the use of high -quality materials.Instead of material, inferior stoves are lighter due to thin material.

Card furnace fault treatment

After a period of use, the flame becomes smaller due to external factors such as the dust of the weather, and sometimes it cannot be hit. So after encountering these problems, consumers must not blindly disassemble the machine.We made a detailed answer. If you encounter problems in the use of stuck furnaces, let's pay attention:

What measures should be taken to use card fire hours?

The normal flame of the card furnace is light blue, the flame in the flame is clear, and the height is about60mmThere are slight noise and strong firepower.If the flame appears small, the reasons and exclusion methods are as follows:

1) The burner fire cover fire hole was blocked by the dirt, which hindered the mixed gas outflow of the burner and cleaned the fire holes.

2) The nozzle was blocked, and the nozzle was unscrewed and cleaned up.

3), The intake inlet and nozzle of the regulator are blocked by the rust, which hinders the gas outflow in the bottle and replace the qualified pressure regulator.

4), The copper Tube is blocked by the flat -faced gas, the copper pipe is raised or replaced by the copper Tube.

5) In addition, the gas is about to be used, and the valve is not all open. You should also pay attention to it. You can take corresponding measures to solve it.

Is it normal for a red fire to appear in the card furnace?Why does the card furnace flush?

The red fire in the card furnace is mainly caused by the following reasons:

1), Gas reasons: When the water in the burning gas is more water or too much impurities, it will make the flame color red fire.

2) Dust cause: When there is dust or stir -fry in the house, the water and oil and gas volume in the air increases.

3), Wind gate reasons: When the wind door is not well adjusted, this may also occur.

4) Booth rack reason: Since the surface of the bracket shelf is red at high temperature heating color, because the special materials of enamel will find that the flame is red around the pot frame, which is the color of the metal ion at high temperature.

Therefore, the occurrence of red fire when burning is not a problem with the stove, but because of the above reasons, it will not affect normal use, nor will it cause harm to people's health.

What should I do when the card -type furnace can't fight the fire?

If you can't get angry when you encounter an gas stove, you should check in the following procedure:

First of all, check whether the gas source switch is in a state of opening. If it is in a state of opening, then, check whether the copper pipe connecting the copper pipe is flat or bending.Pick up the bracket rack and see if the fire nozzle is fired:

1)If you do not take a fire, see if the discharge needle is discharged

A,If the discharge needle does not discharge, it means that the discharge needle faults should be replaced.

BIf the discharge needle is discharged, it means that there is a part of the air path to block or the valve body failure, and the valve body should be replaced.

2)If the fire is fired

A,If it can be burned normally, it means that the position of the igniter is high, and the user should gently press the ignition machine to press a few times, and then put it on the pot frame.

BIf the flame is too weak, the flame is too weak to reach the head of the furnace, the gas pressure is too low, it may be that the gas cylinder is about to use or the regulating valve adjustment function is abnormalEssence

CIf the fire is rolled, and the flame can reach the cover, but it does not have the fire, indicating that it is the obstruction of the valve body, and the user uses fine iron wire to clear the nozzle.

The function of smokeless barbecue car

Baked, fried, scalded, and iron plate burning function in one body, can be combined arbitrarily.

principle of smokeless barbecue car

The oil -containing flue gas passes through the high -voltage electric field, adding a DC negative voltage of 12kV to the high -voltage discharge cable in the electric halo area.Free electronic negative ions, negative ions are attached to the particles in the flue gas, so that the greasy particles in the flue gas are charged, and then the negative particles flow to the anode plate of the dust area.

In the dusty area, the positive and negative electrode plates are arranged alternately, and there is a uniform electric field between the electrode plates. After the negative particles enter the electric field, the action of the Curon is flowing and attached to the anode plate.In addition, the harmful gases in the smoke can be broken down by the ozone in the electric field, remove the odor, and the harmful gases are also removed.The removal rate of the oil -free barbecue car oil fume is more than 91%, and the clean air is discharged through the export export.

After entering the purifier of the oil fume, the large particle oil is filtered by the mechanical filtering principle; the filtered oil fossil enters the non -blind area of the plasma state.When passing through the non -blind area, the electrical, decomposed, and loaded; the gas -shaped charged particles were adsorbed on the electrode plate when passing through the high and low voltage electric field.

When the organic matter is purifier in the oil mist, the chemical reactions are broken down due to the strong oxidation effect of ozone. In addition, the trace amount of ozone sterilizes the excreted gas.Therefore, changing equipment has good oil removal, smoke, flavor, and sterilization.

Features of smokeless barbecue car

1. The furnace body is made of unique infrared smokeless barbecue burner. Its burner is a honeycomb, which can filter all gas flavor and make the barbecue tender.

2. According to the characteristics of the food, the size of the firepower can be freely adjusted to ensure that all kinds of food can achieve the best roasting effect. At the same time, the disadvantages of traditional charcoal grilling are very easy to bake food.above.

3. The furnace body adopts the design of heat storage and insulation. The heat no longer distributed outside the furnace body. The operator does not have to endure smoke and fire, and it is more simple, convenient, and flexible to operate.

Disclaimer: The above is derived from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. Introduction to Turkish barbecue

When I arrived in Trkiye, I saw the real Turkish barbecue, and I realized that it was so poor to know about Turkish barbecue in China.The spectacular barbecue column and overflowing aroma are full of streets, lanes, shopping malls, restaurants, stations, playgrounds, and residential areas. It has become a beautiful landscape on the streets of Europe and the United States.The endless and popular scenes are amazing and lingering.

In any restaurant in Trkiye, pick up their menu, you can see at least 5 barbecue.AdanakeBap, Siskebap, Doner .... It can really be said to be dizzying.

Second, Turkish barbecue historical origin

Turkish barbecue fast food originated from the ancient Turkish empire court barbecue banquet, which was later passed on to the folk. Because of its easy production method, fast, and delicious taste, the entire Middle East was extended.Formed a complete and simple franchise operation system, it has now become one of the mainstream foods of leisure and fast food throughout the streets.The spectacular barbecue column and overflowing aroma are full of streets, malls, restaurants, stations, playgrounds, and residential areas. It has become a beautiful landscape on the streets of Europe and the United States.The endless and popular scenes are amazing and lingering.

three,Turkish barbecue machineCharacteristic

Full stainless steel shell and deceleration motor combination, which is designed with advanced technology.Overall adopts a horizontal drawer structure, mainly composed of barbecue boxes, electric heating pipes, power wiring boxes, and barbecue racks.The oven is automatically rotated to roast the meat skewers through the heat of the electric heating pipe and the micro motor installed on the barbecue rack. The bakery is used to make the roasted meat skewers uniform, delicious, mature fast, and avoid it at the same time.The environmental pollution improves the degree of hygiene.This product is simple and low in cost.

Fourth, Turkish barbecue machine classification

1. Gas type

The gas -type Turkish barbecue machine is a new type of DC battery dual -use Turkish barbecue machine.

2. Electricity

Electric heating Turkish barbecue machine is the introduction of development and production of luxurious infrared intelligent electronics. Electric heating Turkish barbecue machine absorbs advanced foreign technology. It uses high -temperature infrared light and thermal temperature to be uniform, strong penetrating, and has the effect of sterilization and disinfection.Naturally scent and fishy smell.And with arc glass door display effect, clean, generous.

5. How much is the Turkish barbecue machine

The 1588-2000 ranges, and the actual price of the dealer or the mall shall prevail.

6. Turkish barbecue formula

1. Lamb

Old soy sauce, salt, cooking wine, chicken essence, egg whites, onions, ginger, sugar, tender meat starch flooded, baked until it cooked according to the taste and Pepper powder.

2. Beef

Old sauce, salt, cooking wine, chicken essence, egg whites, onions, minced sauce, sugar, curry powder, black Pepper powder, tender meat starch flooded, grilled until cooked, but as cumin and Pepper powder like mutton, or it can alsoSwipe barbecue sauce.

3. Chicken wings

Old soy sauce, salt, cooking wine, chicken essence, peppercorns, ginger, curry powder, black Pepper, tender meat starch, sugar flooded stains, grilled oil while roasting until 7-8 mature, brush with honey, continue to bake, wait for itBake into golden yellow, brush the barbecue sauce, just.Honey makes the chicken wings golden, and the outer coke is tender.

seven,TrkiyeGrilled meattype

barbecue: The steaming noodle cakes, the roasted meat, refreshing lettuce, and crispy bean sprouts that exudes a strong aroma are tightly wrapped in it.The aroma of the stock is sprayed in the mouth,

Barberburga: Sweet -fragrant hamburger cake clip is fat and thin, spoiled meat and lettuce leaves, and apply special sauce. I do nt know how many times delicious it is better than KFC's burgers!

Telle barbecue: Crispy and tender roast meat, refreshing lettuce and shredded onion, and fresh seasoning, of course, the taste is good, a box of full -scale let you enjoy it beautifully!

Disclaimer: The above is derived from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

How to ignite barbecue charcoal

1.BBQ disposable grill charcoal

This BBQ disposable Barbecue oven is designed for families that are not often barbecue or outskirts out of the outing. They use less flammable charcoal density, that is, molded charcoal, because these charcoal has added a split component before leaving the factory.Therefore, it is very easy to ignite. It can ignite charcoal with ordinary matches. However, because the charcoal is soft, the temperature is low when roasted, and the burning time is short. It is suitable for baking some chicken wings, chicken legs, vegetables.

2. Ordinary barbecue charcoal

barbecue charcoal is a common variety of barbecue charcoal. The farmers' markets in various places can be bought. They belong to large roads. Because the raw materials of fruct charcoal are more complicated, there are many varieties such as apple charcoal, pear charcoal, and dates.Not the same. In general, the most difficult to ignite is jujube charcoal. Apple charcoal and pear charcoal are similar, and they are better ignited. You can put it in a barbecue in the barbecue and put the fruit charcoal to the fruit charcoal to the fruit charcoal to the fruit charcoal toBurning paper can be ignited. If the fire is small, use a fan to fan, but some fruit charcoal people add water, which is not easy to ignite.

3. barbecue mechanism charcoal

Due to the high density and high hardness of the mechanism, the characteristics of long combustion time and regular appearance are now widely used in the barbecue industry. Of course, the mass of the mechanism of charcoal is uneven, and the good quality mechanism is a sawdust wood residue. The quality is not good. The quality is not good.The mechanical charcoal raw material is Peanut shell, straw, etc., so it feels very different to ignite. For the pure sawdust mechanism that is not well ignited, it is necessary to use the fire charcoal to help. What is the fire carbon?The fire carbon list lists a variety, which is actually the BBQ barbecue charcoal mentioned earlier. Because it adds flammable ingredients, it can be ignited first, and then put the mechanical charcoal on the burning BBQ barbecue charcoal.Ordinary fruct charcoal can be used as a fire charcoal, and the charcoal can be ignited on the lit carbon.

4. barbecue white charcoal, steel charcoal, carbon charcoal

Whether it is white charcoal, chrysanthemum charcoal, or toast charcoal, because of its hard material and high ignition point, it is difficult to directly ignite. This requires some auxiliary tools, such as this kind of Korean manufacturing when lit chrysanthemum charcoal and toast charcoal.The charcoal igniter, the bottle below is the fuel (methane) on the top of the flame nozzle. After igniting the effect, the effect is like electric welding cutting. It can quickly ignite the charcoal. If there is no carbon merchant, you can also pour some lighter oil on the charcoal merchant, it will be easy to igniteOf course, you can also use the fire charcoal to ignite the white charcoal, and the effect is also good. If you have a gas stove in the kitchen, you can also put the white charcoal block in the gas furnace and then use the iron clip into the Barbecue oven.