1. How to use an inflatable mattress

The types of mattresses are diverse. The inflatable mattress is also a kind of Mattress. It has strong flexibility and elasticity. Pay attention to the method:

1. The initial use of inflatable mattresses

(1) Spread the air cushion.

(2) Open the gas mouth and automatically expand the air cushion bed.Turn off the gas mouth, fold the air cushion bed repeatedly, then press it a few times, and then open the valve to let the air cushion bed automatically expand, so that it completely restores elasticity and shape.

2, inflatable mattress gas stitching method

(1) Open the air cushion and open the gas mouth, the air cushion bed will automatically begin to swell.

(2) Regulate air pressure and adjust its comfort.

Note: If you keep it in a rolled state for a long time (not recommended), please use your mouth to blow a few timesLet it restore elasticity.

3. Method of exhaust Mattress exhaust

(1) Open the breath, roll up from the other end of the air mouth, and press the air.

(2) Turn off the gas mouth, roll the air cushion bed from the other end, and open the air mouth to discharge the residual air again.

(3) Finally, close the valve and save it at any time.

Note: When carrying, please put in the bag to avoid scratches.

4. Method of inflatable mattress custody method

Spread the air cushion, open the gas mouth, and store it in a cool and dry place (for example: placed on the bottom of the bed or behind the sofa, etc.), because the sponge of the air cushion bed has a memory shape, which can quickly swell into the most commonly used shape.

2. What are the precautions for the use of inflatable mattresses?

1. After the air bed is purchased, it can be inflated immediately after the first time it is charged (it is best 12 hours) to use it, because a buffer process is required at the tape and sewing of the air bed;Try not to get angry.

[folding bed maintenance] clean maintenance of folding bedfolding bed cleaning skills

1. If the folding bed is stained with stains, it can be wiped with fresh milk to make it more shiny and soft.

2. folding bed accidentally dipped in oil stains. You can wipe it with warm soapy water first, and then wipe it with a rubber.

3. If the folding bed is stained with a round bead pen oil, it is best to wipe it off with a rubber.

4. If you do not sprinkle beer, soda, and coffee on the bed, you can dry it with warm water first, and then wipe it with water.

5. If the folding bed is stuck to the gum, you can use the ice cubes to solidify and remove it.

6. If the folding bed accidentally dipped the cream, you can first suck it with a dry cloth, and then wipe it with a little cleaner.

7. Please avoid placing the folding bed in direct sunlight and humidity;

8. Do not use alcohol to clean stains to prevent products from being aging.

How to identify the quality of folding beds?

Step/Method

1. Evaluate whether the folding bed/lunch break is firm and whether the bed foot will shake left and right.

2. Evaluate the workmanship of the folding bed/lunch break. There are rough scratches on the surface.

3. Evaluate whether the folding bed/lunch bed is convenient.

4. Look at elasticity.Lie down in person and turn around a few times. The good spring will not be moved or uneven, and it can immediately restore the original shape.

5. Look at stability.You can use both hands to shake and shake the product back, left and right, and sway, and the framework is firmly explained.

6. Pay attention to the quality of the bag.If you buy the leather, you can use the tip of your two fingertips to pull one place and pull it up. The feel is powerful.

7. Look at the craftsmanship.If it is a folding bed of the steel frame structure, it is necessary to pay attention to the Smooth and gap at the welding. The coating looks uniform and soft, and the surface of the steel pipes treated with plastic spraying process is high, more abrasion, and more shiny.And if the paint is used, the surface of the steel pipe is more likely to produce scratches and cause it to oxidize and rust, and there is no gloss.

[Production of folding bed] How to make the folding bed on the wall of the folding bed

For those who go to school or work in the metropolis, the most distressed is the small space for living.Especially in the first -tier cities, not only the rents are expensive, but the room space rented is very small, and there is no place to put Xi Mengsi in a row.Therefore, today I shared the production of this folding bed. When you need to use it, you can just turn down the bedboard. It is quite convenient to lift and lean on the wall when not in use.

How to make a folding bed on the wall

1. Main materials

Founded wood, wooden board, hand saw, hammer, wood screw, coarse sandpaper, pencil, etc.

2. Production steps

Today, the tutorial is the production of folding single beds. The size is based on the actual situation of your own. The conventional size is 80*180, 80*190 and 90*200cm. Generally, you can customize your appropriate size.EssenceHere we designed 80*180cm, with a bed height of 30cm.So how to make a folding bed?It is not difficult for a carpentry enthusiast or a carpenter. Let's take a closer look at the production method.

1. Nail -made bed frame

First cut the two Square woods of two and two 180cm with a hand saw, and use a wooden screw (or iron nail) to nail a 80*180cm folding bed framework.Then the 2.5cm position on the inside of the frame is added with a 75cm horizontal crotch (pictured), and a 165cm vertical gear is added in the middle.Finally, a few bedboards are nailed, so the simple frame of the bed is done first.

2. Make bed and feet

The height of the bed is about 28cm, which can be adjusted according to your needs.Four beds, which are divided into two inner beds and two outer bed feet.First of all, we make the inner bed feet, first saw two Square wood materials of 2.5*7cm in length of 26.5cm, and then insert one end into the middle of the two horizontal crotch under the bedside.swing.Then nail a 1.5cm wooden board on the lower end of the bed to play a role in a natural fixed inner bed.

Then start making the outer bed foot, and first saw the two 2.5*7cm Square wooden materials with two 28cm length, insert one end into the crotch gap of the bedside head, and then fix it with a screw.Finally, add a piece of wooden blocks on the outside of the outer bed (pictured). When used, hold the wooden block freely and start the folding bed.

3. Debugging the bed

After the frame of the folding bed is made, you can start adjusting the details, put the folding bed in the specified position, first adjust the four beds to open up and down, and whether the size of the placement position is appropriate.Let all activity components be opened freely, so that even children can put away or put down the folding bed without worrying about holding hands.

4. Laying the bedboard

The bedboard is paved with 1.5cm thick wooden boards. First, the remaining gap is paved with wooden boards. You can use wood screws or small iron nails to fix the crotch of the bed.The paved bedboard should be flat and tight. After paving the bedboard, it should be polished with coarse sandpaper. Of course, it is best to use a polishing machine, so that the efficiency will be improved a lot.

5. Complete

Of course, today's DIY folding bed is also suitable for many small units. It can be made more exquisitely in the production and selection of materials.In fact, as long as you are willing to move your brain, you can improve the spatial utilization rate.

How to buy in the lunch break

1. Look at the company environment

On the one hand, the company's environment refers to whether the space of office venues is loose and room temperature.Due to the narrow channels of people in the general grid room, there may be people walking around during a break. In addition, the stored space is limited, which is more suitable for small and easy -to -resolve marching beds; if there is a loose space, simple wooden beds and sponge folding bedsThey are all good choices; try not to choose thick pads and unpopular ones in the south, otherwise it will be too hot when the season when the air conditioner is turned on.On the other hand, it is necessary to consider whether the corporate culture is rigorous or relatively loose. Whether the style of the folding bed is matched with the environment.If there is a very rigorous administrative director, you are not considering what kind of folding bed is suitable for you, but whether you can pave the lunch break.

2. Look at the size

The general folding bed is between 180 and 195cm, with a width of only 50cm, and 120cm wide.Different people should choose according to their own conditions. The bed is too narrow and comfortable.It is recommended to choose a bed with a width of about 70cm. Such beds are suitable for most people.

3. See if you can disassemble and wash

The folding bed is generally placed in the corner and the bottom of the table. It is easy to stain the dust to breed bacteria. Whether it is convenient to clean it is a factor that needs to be considered.Most of the canvas beds are unpopular. Generally, it is matched with dust cover, but if it is often used, it must be too troublesome to set the dust cover every time.Of course, if you change it in half a year or the season, it doesn't matter.There are also some demolished mattresses that are different materials on both sides, which are convenient for different seasons.

4. Look at the details

The folding bed should consider the stability of the bracket and the breathability and warmth of the cushion.The supporting frames are divided into steel pipes and round pipes. Generally, the Square Tube will be relatively stable, and the horizontal supporting rods will be better. It is also necessary to pay attention to whether it is easy to roll over.The advantage of canvas mattresses is that the breathability is good, but the back of the winter will be cold, and the aging resistance is not as good as Teslins. It is not recommended to buy it if lying down.If there is a thick pad with filling, consider the softness and hardness, and don't choose too soft.

What should I pay attention to when choosing a folding bed

1. Pay attention to the shape and material of the folding bed. There are many beds and materials, but you should also pay special attention to choose according to your own needs. For example, the elderly, children are not suitable for the folding of folding and frozen horn first.bed.

2. Pay attention to the softness and hardness of the folding bed. The spine of a person is composed of a section of the vertebral Bone, which can be bent and can be stretched.If the bed is too soft and the body sinks hard when sleeping, it will cause the spine to be too curved, causing the waist muscles to stretch, and there will be uneven phenomena.If the bed is too hard to sleep, it is uncomfortable and difficult to fall asleep.

3. The folding bed of the steel frame structure needs to be paid attention to whether the welding area is Smooth and there is no gap.If it is a paint technology, it depends on whether the surface of the steel pipe is prone to scratches and whether it is easy to oxidize and rust.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;