1. Method of duck palm wood

1. Light: Duck palm wood should accept 4 to 5 light hours a day, and indoor maintenance is placed in places with scattered light or semi -yin.It cannot be in an environment with too strong light for a long time, and scorching spots will appear on the leaves, and even the leaves will become yellow.In winter, it can be maintained at all sun.If you grow in an too cool environment, the leaves will become yellow.

2. Soil: Duck palm wood cannot grow in the alkaline soil that is sticky. I like loose, breathable, fertile micro -acid sandy soil. The method of soil can be mixed with 5 pieces of peat soil and 3 parts of rotten soil.A small amount of cake Fertilizer is added as base Fertilizer.

3. Fertilizer: Duck palm wood Fertilizer is mainly in the growth period of April to September. It is applied to thin Fertilizer once a month. Fertilizers choose Compound fertilizer or cake Fertilizer of nitrogen, phosphorus, potassium.However, it cannot be used too much, which will cause the spots of flower and leaf duck to disappear green; during the dormant period, it must be stopped, otherwise the root system cannot absorb Fertilizer and cause damage and affect the healthy development of the plant.

4. Watering: Duck palm wood is moist and drought, so it is better to raise.When the soil is found to be dry, you need to water the water immediately, so be careful not to water too much.spring and autumn, water 1 or 2 times a week.It is hot in summer, and it is usually poured once a day to keep the soil slightly wet.winter grows slowly, poured water once every 5 to 7 days.Spray the water fog on the leaves regularly to increase the air humidity and make the leaves green and bright.

5. Pruning: Duck palm wood during the seedling stage can be trimmed off as long as the dense branches and leaves and the cluttered branches and leaves are trimmed; pruning during the germination period in spring, the main topics are carried out.Inhibit the height of the plant type, and promote the germination of the new buds of the side branches; according to the growth of the plant, the dense and cluttered branches and leaves will be cut in time to avoid affecting photosynthesis and breathing growth.

2. precautions for breeding of duck palm wood

1. When the summer light is too strong, it is necessary to keep it in a ventilated and cool place to avoid strong light exposure.

2. During the winter maintenance, the temperature is controlled in an environment with above 5 C.If the temperature is lower than 0 C, frostbite will occur.

3. Pay attention to opening the window frequently to keep the indoor air circulation, which is conducive to the strong growth of the plant, and it can also avoid the occurrence of pests and insect pests.

Third, cuttings of duck palm wood

1. It is recommended that you choose the two -year -old duck palm wood, choose a strong growing branch for cuttings, first cut it with scissors, and keep the obtained branches at the top leaves.

2. DuckPalmPut the wooden strip in the plastic bottle loaded with water for soaking. Pay attention to soaking in a cool vent and ventilated place. You can also put a little root powder in the plastic bottle, which helps take root as soon as possible.

3. After more than a month of soaking, the duckPalmWood usually takes root. At this time, you can carefully plant the branches of germination of germination into the Flower pot. After a while, the duckPalmMu will grow new leaves, which means that the cuttings are successful.

Fourth, the cuttings of duck palm wood are more appropriate

When the duck palm wood is cutting and breeding, it is best to keep the temperature at 15-25 C, so cuttings are best in spring in spring, and the south can be carried out in April.Cutting should avoid cool summer and severe winter. These two extreme seasons are not suitable for the growth of branches.When cutting, pay attention that the matrix should be clean enough, and there must be no eggs in it.

1. Method of Niuxianggui Breeding Method

1. Soil sour

Sun Xianggui is suitable for growing a little bit of acidic soil.The fertileness of rotten soil and peat soil is very suitable.You can also be mixed with perlite or fine sand.

2. Watering in moderation

Ri Xiang Gui watering should be moderate, and the soil is the best in a slightly humid state.spring and autumn, watering once every 2 to 3 days, watering once every 1 to 2 days in summer, and watering in winter once every 3 to 4 days.Especially when the root water is just planted, the first time I need itWater, then watering a small amount.Excessive or wetting can affect the growth of the plant.

3. Passionate light

The sun incense and Guiyang must be more common in order to make it grow more vigorously, and the fragrance will be stronger.The temperature control is best at 15-30 C. When the temperature is low in winter, it must be taken to keep warm to make it flowers.

4. Keep humidity

Sun Xianggui also likes a gentle growth environment. The humidity should be kept about 80%. It is dry in summer and autumn. In order to keep the humidity, you need to spray water and watering at the leaves.winter is very cold, do not spray water, so as not to cause the root of the sun in the sun in the pyramid.

Second, Niuxianggui's breeding precautions

1. Timely trimming

Sun Xianggui must be trimmed in time. Their growth period is very long. The long branches and leaves, the weakness and the yellow branches and leaves must be cut in time.In this way, the nutrition of the plant can be fully guaranteed.And in the just -planted Rimi Gui, you must cut some tender branches. After the tender shoots are germinated, you should also cut it in time.

2. Diligence and thin fat

Sunframe osmanthus period is too long, so it needs enough nutrients to ensure its nutrition.Phosphorus and Potassium fertilizer is the most suitable Fertilizer for Japanese cinnamon. It can provide sufficient nutrients in Nikko Cinnaba to keep the flowers continuously.The Fertilizer is the most suitable for Fertilizer in August in autumn. The average is 10 to 20 days on average. It is best to apply Fertilizer once a flowering period.

3. Change the basin every year

Ri Xianggui needs to change the pots every year, otherwise the long -term flowering will cause the soil to miss the nutrition.It is best to change pots from 2 to March each spring, and autumn is the best in September to October.Be sure to keep a part of the original soil, add new Nutritional soil, then pour water, and then let it grow normally.

Third, the diseased and insect protection

1. The most common pests in Nikkei are leaf blight and anthracnose.Both of these diseases can be removed with bacteria.In addition to the multi -bacterial clearing, the Tapin Pinotrane 800 can also be sick after being diluted.

2. Most of the pests are shell worms or red spiders. After 1000 times the water is diluted, spray can be sprayed to remove insects soon.

Dragon boat flower breeding method

1 , Potted soil

Dragon boat flower is an instruction plant for acidic soil, so you need to choose a slightly acidic humus loam for cultivation. 2: 1: 1 The proportion is mixed and disinfected. The soil requires loose and well drainage.

2 , Light and temperature

Dragon boat flowers are happy, but avoid strong light.In the spring and autumn seasons, it should be placed in the place where the back wind is facing the sun. In summer, it needs to be shaded. In winter, the dragon boat flowers can be fully accepted.Dragon boat flowers are warm and warm, and it must be maintained in the winter room 12-18 between.In the spring of the Qingming season, the dragon boat can be placed outdoors, and the temperature in the autumn is lower than 15 Timely put the dragon boat into the room in time.

3 , Watering and fertilization

Dragon boat flowers like to moisturize the environment, but they are afraid of accumulating water.spring and autumn seasons every seasons 3 It is best to pour water permeability once. Water in the morning and evening in the summer and evening. At the same time, in order to maintain higher humidity, the leaf surface of the dragon boat flowers should often be sprayed in summer.Dragon boat flowers are like fat, but avoid thick Fertilizer and raw Fertilizer. In the growing period, it can apply rotten Organic fertilizer every half month.

4 Pelvic change

Dragon boat flower average 2 Change the basin once a year, the best time to change the basin is 5 At the beginning of the month.Some old roots should be removed appropriately when changing the pot.

5 , Prevention and treatment of pests and insect pests

The common diseases of dragon boat flowers include leaf spots, anthracnose and coal dirt.Essence

6. Breeding

The breeding method of dragon boat flowers is best to use cuttings. This method is easy to survive, and it is quickly flowering.Cuttings should be selected every year 3 As well as 4 The month is performed, and the two -year -old and lone branches are the best. After cutting 35 The dragon boat flowers around the sky will take root, 60 After day, you can move the seedlings.

How to trim the dragon boat flower

1, Cut off the weak and dense branches before the spring sprouts, and leave the branches born of the year3 Short -cutting left and right.New buds grow up with new shoots to grow 10 A pick -up at the left and right, retain the two bud points of the base, and promote the growing branches. When the branches grow to the seven leaves, they will be picked again to promote the split split sprout and speed up it.Flowing process.

2, The inflorescence of the dragon boat flower generally grows the top of the branches. After the first flower, you need to cut off the residual flowers in time to avoid the consumption of nutrients from continuing the residual flowers. In addition, it is necessary to apply phosphorus and Potassium fertilizer to promote the flowers of the plant again.

3, The branches that have been opened in the summer and autumn of that year must be short -cut, and only the base needs to be retained. 3 Just the sprout eyes, the length of the base pile is 10 The most suitable cm is the most suitable.

precautions for dragon boat flowers breeding

1 In the rainy season in summer, pay attention to drainage in time to prevent the roots of water.

2 When breeding of dragon boat flowers, pay attention to keeping the environment ventilation. Poor ventilation is easy to grow aphids and shell worms.

3 Dragon boat flowers should pay attention to thermal insulation when wintering, which is lower than long for a long time 0 At the time, frost damage is prone to.winter winter should be kept 10 The above, and give sufficient light.

4 Pay attention to the prevention and treatment of diseased and insect pests. The common diseases of dragon boat flowers include leaf spots, anthracnose, and shell worms. It should be mainly based on prevention, maintain the environment of the environment, and use it.

1. The breeding method of Dragon Steel iron

1. Soil

Dragon Face Tie likes to penetrate and has strong ventilated sandy loam soil. It is the best acidic soil.Generally, you can choose loose, breathable, and well drainage soil.It can be prepared by 1: 1: 1: 1: 1: 1, which can effectively ensure the water permeability and breathability of the soil, which is also beneficial to the growth of the plant root system.Adding to river sand and coconut bran can prevent soil knots.

2. Watering

When watering, irrigate from the upper part of the plant to keep the soil moist and increase the humidity of the air.Each spring and autumn are important periods. Watering once every 4 days, watering every 1 to 2 days in summer, and spraying water on the leaves to keep the humidity and reduce the temperature.

3. Fertilization

The amount of fertilization of the dragon beard should not be too large, usually fertilizing once every half a month.However, please be careful not to use too thick Fertilizer or Fertilizer.Sometimes because of too thick, the roots are burned.

4. Light

Dragon must be ironed and shade -resistant, and is cultivated by the window with a strong sunlight.When the sun is particularly sufficient in summer, the sun is appropriate.At this time, it is best to be between 40%and 50%.

5. Temperature

The long temperature of the dragon beard is 18 C to 30 C. If it is Outdoor, it will be moved indoors immediately in the rainy season or autumn.Unstable temperature changes will cause the dragon's tree to die.Conservation in the north, there is heating in the winter, as far as possible as much as possible from heating, so as not to bake dry leaves.

6. Pest disease

The main seedling period of the dragon beard iron is leaf spots or anthracnose. At this time, we can use special drugs for spraying, spray it every 7 days to 10 days.Can be effectively controlled.

2. precautions for the breeding of Dragon Steel

1. Dragon beard iron indoor farming should be ventilated frequently, the yellow leaves of the dragon beard tree, and the growth is sluggish.Therefore, the indoor cultivation must pay attention to ventilation.

2. The roots of the dragon beard are developed and growing fast. Generally, it is changed to pelvis once every 2-3 years.When changing the Flower pot, pour the garden soil and change the new soil.After changing the basin, water it and move it to the cool and ventilated place for 5-7 days to apply it normally.

3. The longer the main branch of the dragon beard, the higher and the higher, and it may be long. At this time, the top will be cut off. Do not worry about damage to it, hit a top, from the incision, you will be separated from the incision.With a few branches, it seems that the plant type is more vigorous and full.

Third, the breeding method of dragon beard iron

The breeding of the dragon iron is generally cuttings and trimming. It is carried out from April to August each year and can be carried out throughout the year.

1. Pile -type cuttings: Fold the leaves directly 1/2-2/3 of the leaves by hand, insert it directly into the clean river sand, and then water it to avoid strong light temporarily.

2. The whole plant is inserted: cut the leaves for short cutting, cutting in a clean river sand and then watering.After that, the air humidity remains at about 70%, and new plants will grow after 1 month.

1. Common varieties of potted vegetables

1. fruits of fruits: color sweet peppers, dwarf tomatoes, cherry tomatoes, hard fruit tomatoes, ornamental eggplant, small Pepper, pocket watermelon and various pumpkin, melon, zucchini, yellow okra and fragrant eggplant.

2. color vegetables: beet, various lettuce, purple -back sunflower, perilla, purple sunflower and flower leaf feathers cabbage and so on.

3. Green -leaf health vegetables: lettuce, vine seven, land Skin, Beijing water vegetables, cabbage, Laler, leaf wolfberry and jaoslum.

4. Rhizome vegetables: fennel, cherry radish, fruit salamander, Wujing, miniature radish, etc.

2. planting conditions for potted vegetables

planting pots should be carried out in the place, and the wind -proof nets should be seal strictly.Have micro -spray or tap water watering facilities.To choose a suitable Flower pot, you can choose a plastic Flower pot, mud tile pot or wooden basin. The particularly precious varieties can also be used in purple sand pots and color glaze ceramic pots. Potted chives can be used in foam boxes.

The substrate used must be cleaned and completely disinfected.Comprehensive nutrition and disease -free pests.Generally, carbon, vermiculite, perlite, mushroom waste, and clean river sand are used for matrix.Try not to use Chemical Fertilizer, more Organic fertilizer such as mochi, Peanut cakes, etc., and Organic fertilizer can also be used with fermented bacteria and rotten cow and sheep manure as the main raw material.Some microorganisms, such as nitrogen fixation and phosphorus -decomposed root tumor, photosynthesis, and phosphorus -soluble bacteria, can promote the full use of nutrients through these beneficial bacteria activities.The use of chemical pesticides is not allowed to use biological pesticides to prevent diseases and insect pests.Flower and wood planting enterprises top ten & gt; & gt;

Third, the planting technology of potted vegetables

1. Reasonably choose the Flower pot.According to the characteristics of vegetables, choose enough Flower pots required for the development of the root system, such as the developed root system, and large Flower pots are required.

2. Arrange the appropriate sowing period.According to the length of the birth period and consumer demand, the planted planting period can be arranged, so that the planting varieties can be sold on the holidays and tourist peak season.

3. join the whole branches in time.Potted vegetables not only require good growth, but also beautiful and artistic. Dwarf crops should be printed in time to remove yellow leaves. Tomatoes, fruits and fruits should be used to use bamboo or steel bars into various shapes to make them grow.Slutherapy management must be carried out, and the side branches must be removed. To a certain extent, it is necessary to go to the top to suppress nutrient growth, reduce nutrient consumption, and promote results.

4. Fertilizer and water management.Tasteless Organic fertilizer, watering and controlling water in a timely manner to make its root system developed, strong and strong.Potted vegetables have limited nutrition and must be poured diligently.