1. What are the differences between mechanism charcoal and charcoal

Two types of charcoal are divided into two types, one is the rustic charcoal, that is, the traditional charcoal, which is obtained by the burning of wood; the other is mechanical charcoal, which is squeezed and processed by wood fragmentation. So what is the difference between them?

1. What is charcoal

charcoal is not completely burned by wood or wooden raw materials, or heat solutions under the condition of isolation of air. The remaining dark brown or black porous solid fuels are the immeasurable non -pure carbon that keeps the original structure of the wood and the impure carbon in the hole.

2. What is mechanism charcoal

Mechanical carbon is a charcoal rod -shaped material made of wood fragmentation and squeezed processing. It is a charcoal made of machine.

3. The difference between mechanical charcoal and charcoal

(1) Different sources of raw materials: Mechanisms are mainly one or more or more by the mechanism of charcoal, carbon, Peanut shell, cotton shell, corn stalks, sorghum stalks, Beans stalks, sawdust, wood chips, granular shells, coconut shells, etc.Materials.Traditional charcoal is fired from wood, and it is commonly used.

(2) Different production principles: Mechanical charcoal is a carbon rod that contains wood containing wood, placed in the machine, which is an artificially synthetic fuel stick.charcoal is made of wood directly after carbonizing wood.

(3) Different combustion process: The mechanism charcoal is compressed by a variety of materials, so it is slow to burn, which means that its combustion time is long, but its burning value is low, and the heat generated is not very large.The charcoal composition is relatively single, the burning value is very large, and the heat generates a lot, but its burning speed is fast, and the continuous combustion time is not as long as the mechanism is charcoal.

2. Which of the mechanical charcoal and charcoal is better

Traditional charcoal is gradually banned because the traditional charcoal needs to cut off the high temperature of trees and pollutes. Most of the charcoal on the market is now the mechanism charcoal. Compared with the mechanism of charcoal and charcoal, the advantages are mainly:

1. More environmentally friendly

Do not cut down trees, use wood products waste to produce, become waste into treasure, and do not destroy the ecological environment.

2. High energy

Mechanical charcoal fixed charcoal content is about 80%, the heat value is 7500-8000kcal/kg, while the fixed carbon content of charcoal is low, and the thermal value is about 6500kcal/kg.

3. clean and hygienic

Mechanism charcoal -free and charcoal -free head, burning without sparks, during the burning period, the ash naturally falls without floating, 3%or 6%of the gray portion or 6%is less ash and flammable.

4. It is more convenient to use

Mechanism has a unified length and size, and the hollow or solid structure is more reasonable, which is conducive to burning and use.

5. The water content is lower

The moisture content of mechanism charcoal is about 5 %, which is lower than ordinary charcoal, and the combustion performance is better.

In summary, mechanism charcoal is better than ordinary charcoal in terms of performance and environmental protection.

1. Mechanical charcoal production process process

Mechanical charcoal is a charcoal produced with charcoal machines. The process of producing charcoal in charcoal production machine equipment is divided into four steps:

1. Broken

Prepare the raw materials of charcoal and put them in the crusher. The crushing quality and quality are an important step in the quality of the manufacture of charcoal. After repeated testing and experiments by the engineer, the raw material of the charcoal machine is crushed to 3 mm of 3 mm.The following can be better formed. If it cannot be fully crushed, it is recommended to use 2 crushed or 3 crushing.

2. Dry

After the crushing machine is crushed, the raw material is transferred to the dryer, and the dryer dry these particles, so that the material can reach a certain degree of drying.Generally, only the prerequisite for producing a good quality charcoal between 6%and 12%of the water content is between 6%and 12%.

3. Make stick

After crushing and drying, it has entered the key steps of charcoal manufacturing. This step is generally used to complete the rod machine. The raw materials with a certain degree of drying are suppressed into a rod through high temperature.

4. Carbonization

The products obtained by making rods are generally called salary rods. It is not the charcoal of the finished product. The charcoal of the finished mechanism must be treated by charcoalization. It is only the mechanism charcoal after cooling.

2. How to produce good mechanism charcoal

A good mechanism is charcoal, high carbon content, beautiful appearance and firming, high hardness, and high burning temperature, but it is not so easy to produce high -quality mechanisms.In terms of aspect:

1. The raw materials are critical

The production of charcoal is the most important. Although the raw materials of mechanism charcoal are widely sources, those who can truly produce high -quality mechanism charcoal are still wooden raw materials.

2. The charcoal machine is good

The charcoal machine is one of the key elements of high -quality mechanism charcoal. It includes crushing machines, dryers, rod machines and charcoal furnaces. The quality of these machines and equipment directly affects the quality of the finished mechanism charcoal.

3. Carbon technology learning

With good machines, good raw materials, there must be good carbonization technology. Only by using the appropriate carbonization technology to burn good charcoal because of the aptitude. It should be noted that the machines and technologies used by different charcoal raw materials are notThe same.