Profile

Tiger Pilan, also known as Huwei orchid, Chitose Lan,It is a perennial herbaceous leaf plant of the Tiandome winter Tiger Tiger.A root -like stems, leaf base, flesh -like lanceolate, hard quality, upright, slightly ditch -shaped at the base; dark green, light green and dark green on both sides;Green; berry diameter is about 7-8 mm.The flowering period is November to December.The height of the plant can reach about 1 meter. The leaves are clustered and standing upright. They have thick and leathery. There are irregular dark green cloud -shaped horizontal lines on both sides, named after tiger tail.There is a horizontal root.Ye Jisheng, often 1 to 2 pieces, also has 3 to 6 clusters, upright, hard quality, flat, but the cultivation of the family often does not bloom, mainly appreciating the leaves.

There are many varieties of tiger tiger orchids, the plant shape and leaf color change have a large change, and the ability to adapt to the environment is strong.The main varieties are Phnom Penh Tiger Olan and Yinmai Huwei orchid.Suitable for decorative study rooms, living rooms, and office places, which can be viewed for a long time.

Native to western Africa and southern Asia, distributed in tropical and India.There are cultivation throughout China.

Nickname

Huwei orchid,Jinlan, Chitose Lan, Huwei Palm, Huangwei or Mother -in -law Tongue

variety

The common cultivation types of my country are also in Phnom Penh Tigeri and Cyllax leaf tiger tail orchids. The former has golden brown edges, and the latter is cylindrical and vertical, which is easy to identifyEssence

1. Phnom Penh Tigerwei orchid

The leaf is 70-80 cm long, and the leaf margin has golden brown trim.

2,Tosho Tiger

Also known as Xiaohulan and Tiger Erlan, the height is only 10 cm, the leaves are short and the wide back overlap, and it is arranged in a lotus seat. The leaves are 7 to 10 cm long, 2.5 to 3 cm wide, dark green on the leaves, and horizontal gray -white tigers.Tattoos.

3. Phnom Penh Tiger Tail Orchid

The leaf margin has golden yellow to milky white side. Sometimes the entire leaves are golden or milky white, only a small part of the central government is green, and other features are the same as those of short leaf tiger tail orchids.

4,Yuanye Tiger Tail orchid

It is also known as the leaf leaf Huwei orchid, the leaf tiger tail orchid, the thousand -year -old orchid, etc. The stems are short or none.3 cm in diameter, dark green on the surface, and horizontal gray -green tiger spots.Specifier, small flowers white or pale pink.

5. Ji Ye Huwei orchid

The plant is radial, with hard leaf, a wide -tone, grooved leaf surface, semi -rounded back, and yellow brown leaf margin.The leaves are dark green, with horizontal light green tiger spots.

In addition, there are silver pulse tiger tail orchids with leaf masks and silver -white vertical stripes; the leaves with wide leaves (also known as fan leaf tiger tail orchids) are also seen in cultivation.

Suitable place

1. Put in the living room

Plants also have five elements, white belonging to gold, green, blue, blue, red, and yellow.The Tiger Pilan is a wood. It is placed in the living room. It can adjust the heart and gastrointestinal health of the family. It also improves the negative character of timid or lack of courage.

2,Placed on the balcony

The balcony is a place where the residential gas is gone, and the plant that can be used for life can be placed.If there are no types of shame outside the balcony, there is no type of shame, and the plant that is prosperous should be planted.Tiger Pilan is an evergreen plant that is prosperous. It is very suitable for grown on the balcony or prosperous position, increasing the wealth at home, wealth and wealth.

3. Put in the bathroom

The leaves of Hiplan can absorb the water vapor in the air for their own moisturizing, which is an ideal choice for toilet and bathroom plants.In addition, Tiger Piran is a plant with shade -resistant and humidity. It can be placed on the sink, close to the mirror, brushing your teeth and washing your face every day, you can see green plants and white sanitary ware.

4,Put on the table

You can place some small leaf -viewing plants on the table. It is particularly suitable for one of the varieties of Tiger Pilan, short tiger tail orchid, which is small and noble. Green makes the family comfortable when eating.The role of summer heat.

5. Place in the office

In addition to being placed at home, Tigerpi is a good choice in office and restaurants.Tiger Pilan is evergreen in the four seasons. It is placed in public. It is green and vibrant, which can bring a good mood and a fortune effect.More importantly, Tiger Pilan can prevent radiation, absorb toxic gases and dust, and let you be in a healthy environment.

Effectiveness and role

1. Medicinal value

Base source of medicinal materials: The leaves of Lily Tiger Tiger orchid or Tiger -tiger Lan in Phnom Penh.

Harvest and storage: It can be harvested throughout the year, washed or dried.

Cool, sour.Indications:Clearing heat and detoxifying, promoting blood circulation and swelling; main colds, lung heat cough, sore swelling, bruises, poisonous snake bite, and hot damage.

2,Viewing value

There are cultivation in all parts of my country for viewing.

Tiger tail orchid's leaves are firm and upright. The leaves have gray and dark tiger -tailed tiger -shaped horizontal stripes with a rigid attitude and peculiar and interesting; there are many varieties, the plant shape and leaf color are large and unique;Strong, it is a tenacious plant with a wide range of cultivation and use, and is a common potted plant at home.Suitable for decorative study rooms, living rooms, bedrooms and other places, which can be appreciated for a long time.

3. Use value

Leaves fiber is tough and can be used for weaving.

4,Purify the air

Huwei orchid is used to purify the air to play a good role.Studies have shown that tiger -tail orchids can absorb some harmful gases in the indoor and can effectively remove harmful objects such as sulfur dioxide, chlorine, ether, ethylene, carbon dioxide, and nitrogen dioxide.

Tigerwei is called a bedroom plant, and even at night it can absorb carbon dioxide and release oxygen.Six -waist tiger tiger orchid can meet a person's oxygen absorption.The use of coconut carbon in the indoor breeding tiger tiger orchids can not only improve people's work efficiency, but also reduce windows to change the window in summer.

Breeding method

illumination

Potted tiger tail orchids are not high in light, as long as there is relatively sufficient light.Tigerci is well grown under sufficient light. Except for the summer, the sun must be avoided, and the sun should be accepted in other seasons. If the indoor light is too dark for a long time, the leaves will be dark and lack of vitality.However, the indoor potted plant must not be moved to the sun suddenly, and it should be adapted in the dark part of the light to prevent the leaves from being burned.If the indoor conditions are not allowed, it can also be placed closer to the sun.

Humidity/watering

Watering should be appropriate, master the principle of naning and not wet.Wipe the dust of the leaves with water to keep the leaves clean and shiny.When a new plant is germinated in the spring of the spring, it should be properly watered to keep the pot soil moist; in the summer high temperature season, the pot soil should also be kept moist; the amount of watering should be controlled after the end of the autumn, and the potting soil is relatively dry to enhance the cold resistance.Watering should be controlled in winter dormancy, the soil should be kept dry, and watering should be avoided into the leaf cluster.When using a plastic basin or other drainage decorative Flower pots, do not accumulate water to avoid rotting and folding the leaves below the blade.

temperature

The tiger -tailed orchid has a strong adaptability. The suitable growth temperature is 20 to 30 C, and the wintering temperature is 10 C.The temperature in winter should not be less than 10 C for a long time, otherwise the plant base will rot, causing the entire plant.

soil

Tiger -tail orchid has strong adaptability, lack of strict requirements on the soil, and more extensive management. The loose sandy soil and humus soil are resistant to drought and barren.Potted plants can be used with 3 parts of fertile garden soil and 1 cog slag, and a small amount of bean cake crumbs or poultry manure are added as base Fertilizer.Growth is very strong, even if it is covered with pots, it does not suppress its growth.In general, it is changed every two years and is carried out in spring.

Fertilize

Tigerwei orchid has low requirements for Fertilizer. For long -term nitrogen fertilizer, the patterns on the leaves will become darker, so Compound fertilizer is generally used.Fertilization should not be excessive.During the growth period, Fertilizer can be applied 1-2 times a month, and the amount of fertilization should be less.It can be used in standards when changing the basin, and the thin liquid Fertilizer is applied 1-2 times a month to ensure that the leaves are lush and thick.You can also bury 3 caves with cooked soybeans evenly in the soil of the pot, 7-10 capsules per hole. Be careful not to contact the root.Stop fertilizing from November to March of the following year.

Frequently problem handling

Breeding method

Tiger tail orchid breeding methods can be propagated and cuttings.

1. Subtraction

The division method is to cut the densely dense leaf cluster into several clusters. Each bush is removed from the leaves, and there must be a rhizome stem and suction bud, which can be planted on the pot.This method is suitable for all varieties of tiger -tailed orchids. It can raise seedlings throughout the year, but it is best in spring and summer.

method:

Take out the plant out of the pot and separate the child and the mother plant with a sharp knife. Try to avoid damage to the root system, so that the cut -off subcutters should be used as much as possible.Pot.

After the sub -plant is separated, placed in the dark place indoors to prevent rain and control watering, so as not to cause the incision to rot. After the new leaves grow out, it can be transferred to normal maintenance.

When the pot is put on the basin, you can sprinkle some fine sand at the root of the plant to survive.Pot soil should choose loose, fertile and transparent sandy cultivation soil.Each pot can be planted for 2-3 plants.

2,Cuttings

The cutting method is suitable for a large number of reproduction, but it is only suitable for the varieties of the leaves and the golden pulse or silver veins. Otherwise, it will disappear the yellow and white marks on the leaves and become the tiger -tailed orchid of ordinary varieties.

method:

Choose a strong and fulfilling blade and cut it into 5-6 cm long. The cut leaves should be placed in a dry and cool place for a few days.1/3 or 1/2, pour water once after inserting.Insert in sand or vermiculite, be careful not to invert.Half of the soil surface, keeping a slight tide, can take root in about a month.In the condition of 15-20 C, the root or root will grow from the base or grow into a new plant in about a month.When the small seedlings grow 2-3 leaves, it can be planted.

In the summer, the cuttings can grow in about January, and then the new buds are germinated from its base.After the new buds grow out of the leaves, the cuttings can be transplanted together.Cuttings in other seasons are relatively long -rooted.As long as the temperature is 15-25 C, you can cut it.For tiger tail orchids that are rotten at the root, if the upper blades are not rotten, you can cut it down for cuttings, and you can also survive.

The varieties of Phnom Penh and spots are used in green seedlings breeding by leaf cutting. The shape of the Phnom Penh and patterns disappears, reducing the value of ornamental. Therefore, these varieties should not be breed with cuttings and can only be reproduced with sections.

Diseases and insect prevention

1. Bacterial soft rot

Symptom

After infection, the leaves change from green to light yellow to gray -yellow. Water immersion soft rot appeared in the stem base near the ground.The rhizome infected, the grassy yellow rot, the root rot and death.The root system was immersed in water and died of black rot.Especially spring, high temperature in summer, rainy rain, typhoon heavy rain weather is more serious.The pathogen is caused by bacteria.

Control method

winter and spring should be kept above 10 C to control watering, and high temperature in summer should be shaded slightly.In spring and autumn, it is strong that phosphorus and Potassium fertilizer should be applied to improve disease resistance.It is best to choose a disease -free or fire burning soil or sterilized after heating.It is found that the diseased leaves should be cut off in time.

In the early stage of the onset, the medical sulfate chainlinin 2000 times liquid, 47%Garrinon's wettable powder 700 times or 30%green suspension 500 times liquid, spray every 5-7 days, spray 2-3 in a row, 2-3 days.Substitute prevention.

2,Sickle spore spot disease

Symptom

Pattore spots are also called leaf spots. The first cycle of leditic spots can be found in the leaves, and the diameter can be expanded to 12 mm.Slightly trapped, light reddish brown, with light yellow edges.The lesions are scattered, all over the leaves, and the center of the spots fall off, forming perforation.Several lesions are blended with each other and cutting the leaves, and the diseased part is dead.The pathogen is the fungus of the semi -aware of the samate shell.High temperature and rainy seasons are prone to disease.

Control method

Reduce soil humidity.At the beginning of the onset, the Bordeaux liquid and 53.8%can be used to kill a 2,000-slicing solution or 47%Garrieron's wettable powder 700 times liquid, spray 2-3 times in a row, and spray it every 5-7 days every 5-7 days.

3. Anthrax

Symptom

The lesions start at the tip of the leaf or leaf edge, brown, and the spots are obvious or unknown. The diseased leaves form small black dots with scattered or arranged rules.The pathogen is a samayal samate fungus, which is called Tigerian spines.Under the condition of high temperature in the south, it is beneficial to the disease, especially from April to June.

Anti -disease method

Cut the leaves and blight leaves in the winter and spring, add phosphorus and Potassium fertilizer, and spray 50%anthrax bustylum wettable powder 800 times liquid in time at the beginning of the onset, or 75%of the Bacteria clear 70%todbin wettable powder (1: 1: 1: 1) 1000 times liquid.

4,Scarlet

Symptom

Adults, nymphs, clusters of tender branches and leaf pests suction juice, make the leaves turn gray -green or yellow, causing the whole plant to wither.

Control method

The best application of the downside during the decentralization of the nymph is the best.Can be used with 40%liquid lotion 500-1000 times liquid or 50%mala-sulfurized emulsion 600-800 times liquid, 80%of 800 times liquid with dumb oil, 25%amine sulfur or insecticidal net or 30%benzide phosphorus, etc.400-600 times liquid, 50%rice-caravan loose stretch oil 1500-2000 times solution.You can also use mineral oil emulsion 0.5%in summer and autumn, with 3%-5%-5%or pine lipids in winter and 18-20 times in summer and 8-10 times in winter.For example, chemical pesticide and mineral oil emulsion have better effects, and also have anti -effects on those who have secreted wax powder or wax shells.The pine lipid agent ratio is pine -alkali 2: Mondre 3: Water 10.

Huwei orchid leaves softened

Light: Tigerwei orchid is a relatively shade -tolerant plant. It can be cultivated in astigmatism, or places where the light is not very strong. If the sun is exposed to sun, it will cause sunburn and softened leaves.

Watering: The tiger -tailed orchid root system is not developed. The too frequent watering can easily lead to hypoxia in the tiger tiger.

Temperature: Tigerwei Lan likes a warm environment, and the temperature is too low. Tigerwei's growth will occur.

Tigerci orchid leaves yellow

Soil humidity plate knot: Tigerwei orchid is more drought -resistant, the root system is a bit fleshy, and the soil ventilation drainage is not good, and it is easy to rot the roots. Once the root is damaged, the leaves must be squeezed.

Lack of sun exposure.Even indoor plants require sunlight, and tiger tail orchids are not fern, and no sufficient light will wither.spring is here, it is recommended to put it in a place with sufficient sunlight.

Huwei orchid leaves withered

Watering, watering once a week, don't be too frequent. Frequent watering can easily make the tiger tail orchids hypoxia.During the growth period, regardless of indoor and Outdoor maintenance, it is not advisable to put it in the shelter and strong sunlight for a long time.During the growth period of Jianye, the growth points are closed and closed, which is dark brown, and the dormant period stretchs. The first raising often believes that it is dry and cut off.After the growth point is destroyed, the growth is terminated.

Huwei orchid leaves are rotten

The soil requirements are not strict, and sandy loam with better drainability.Make sure that the leaves will not rot.It is suitable for growing temperature at 20 to 30 C, and the wintering temperature is 10 C.Pay attention to ventilation.Generally placed in the yin or semi -yin, but it also likes the sun. Only when the light is too strong, the leaf color will become darker and white.Like warm temperature.

precautions

1. Tiger Pilan does not have strict requirements on the soil. The pot soil can be made with rotten soil and 1/3 of the river and sand.It is usually maintained in a well -ventilated place.See dry and wet watering, especially in the seedling stage, it is not advisable to water too much, otherwise it will easily cause rhizome rot or even death.

2. In the summer, you need to move to the north balcony or indoors. There are bright scattered Lights. Spray water on the leaves 1 or 2 times a day to keep the air moist to benefit the green leaves.The peak growth season is performed every 2 to 3 weeks of thin liquid Fertilizer combined with nitrogen and phosphorus.If nitrogen Fertilizers are only applied for a long time, the spots on the leaves will become dim.

3. In the winter, the inner sunlight is sufficient to control the watering, but it still needs to spray warm water on the leaves every 5 to 7 days to keep the leaves clean and prevent dust from being stained.The indoor temperature is not less than 12 C.In the spring every 1 to 2 years, it is combined with a basin in the spring.Due to the upright growth of Tiger Pilan leaf clusters, a Tube pot should be used to show the compact and beautiful plant.

4. Tiger Pilan leaves are straight and like sharp swords.The leaf surface is like a tiger's tail, which is extremely charm. The leaves are thick, the leaves are thin, and the plant shape stands up, like a green samurai.Put at the center of the basin Conference table of large or medium -sized conference rooms at the corners of the study and halls.

Principles of fruit trees pruning

When trimming the fruit tree, the fruit farmers should not be blindly carried out. They should follow the three principles of "trimming the trees, the shape of the branches, the combination of the length, the combination of length, and the combination of light and weight."Among them, "because the tree is trimmed and the branches are made" refers"Combination in length" means that when the fruit trees are trimmed, the factors such as plants and fruits should be considered. The trimming should be discussed from the long process.Mainly, the result of the trimming of the tree is mainly based on growth and results; "mainly light and weight combination" means that when pruning, especially when the young trees are trimmed, the amount of pruning should be reduced to avoid too much trimming too much pruning too much pruning.The phenomenon of plant growth and suppression occurred.

fruit tree trimming technology

Although the trimming of fruit trees is divided into dormant trimming and growth pruning, the purpose of the two pruning is very different (the pruning period is mentioned by the specific purpose of the two), so there is a large difference in the trimming technology.The specifics are as follows:

Trimming during dormancy: short -cutting, recovery, long release, sparse branches, etc.

Trimming during the growth period: buds, carving buds, removing cute, topping, clinging to branches, twisting, pulling branches, removing, and other branches.

Short interception (short shear)

1. What is short -cut

It is a part of the year of the year.

2. Short -cut effect

(1) Promote the growth of branches and expand the crown

The germination and growth of the buds under the short -cutting of the mouth is conducive to expanding the canopy.It is mostly used for the pruning of the central dry and extended branches, the main branches extend the branch, and the side branches extend the branches.

(2) increase the amount of long branches

The short -term sprout rate and branches are significantly increased, which is conducive to increasing the amount of long branches. It can be used for the cultivation of large and medium -sized branches and the adjustment of the branches, and the restoration of the tree.

(3) Short cutting can shorten the axis, shorten the distance of nutrient transportation, and help promote growth and update.

(4) It can enhance the top advantage.

Cut

1. What is shrinking shear

Cut to a part of many years.When the thicker cuts are cut, first cut or short, and then retract when the branches are weak. Such a trimming method composed of two cutting treatment is called shrinkage.

2. The function of shrinkage

The role of resurrecting and changing the growth direction of the branches is conducive to ventilation and light transmission and weakening the mother branches.

The promotion effect of shrinkage -is often used in the renewal of the resulting branches and the weak branches.

The weakening effect of scissors -commonly used for power regulation, control or weakening the auxiliary support branches between backbones.

For example: weak branches shrink cutting

The weakened branches are mostly a single branch extended branch.When shrinking, shrink to the back of the strong branches or can be raised by raising angle.

3. How to apply

The renovation of many years of auxiliary branches is the result branch group. As a result, the branches are renewed and updated, the length of control of the backbone branch, and the size of the crown.

Scrutiny

ScrutinyMeaningTheRemove the branches from the base.

Sparse cutting

1. Reduce branches and improve the light in the crown, which is conducive to promoting results.It is often used to remove competitive branches, upright branches, overlapping branches, cross -branch, etc.

2. Weaken the growth trend of mother branches.It is often used to regulate the balance between the backbone, stronger and more sparse, weak or less sparse.However, if flower buds, result branches, or invalid branches are removed, it will enhance the power of the overall and mother branches.

3. The wound formed on the mother branches can affect the transportation of water and nutritional substances. It can use sparse shear to control the upper branches and the growth of the lower branches to enhance the growth of the lower branches.

Scrutinyofapplication

Shutdles are densely sprouting, strong branches, and dense branches.For Wangshu and Wangzhi, you want it to ease growth and balance the branches.Remove the dead branches, diseases and insect branches, long branches, drooping branches and aging branches.

Long -term

1. What is long -sized

That is, the branches of raw branches will not be trimmed in the year, and the top buds are retained to allow the top buds to make branches.More use for young trees.

2. The role of long release

Proper long release is conducive to alleviating trees and promoting the formation of flower bud differentiation.

3. How to apply

Two upright branches, competition branches, and long branches cannot be released.

The golden mean branches, horizontal branches, and oblique branches can be long.

Tune

(Artificial changes in the growth direction of the branches)

1. What is Qu Zhizhi

Bend or change the annual or perennial branches, change its growth direction, and make full use of the space to promote the results of the tree.

2. The role of song branches

It can change the top advantage, ease the branches, increase the bud, reduce the power of the branches, increase the short to the number, which is conducive to the flowers. At the same time, it can also make full use of the space to make the branches evenly distributed and good light.

3. How to apply

The annual development of branches or perennial auxiliary branches, and branches can be tacitated to promote flowers.

Carving and multi -trail carvings

1. What is engraving and multi -ring carving

The horizontal cutting cortex is used to the wooden part above or below the bud branch, which is called engraving.

The multi -tract carrier is cutting a week on the branches with a knife or cutting ring for a week, and it can significantly increase the germination rate.

2. The role of engraving and multi -tract carvings

Before and after spring germination, carved injuries above the branches can prevent the top of the top nutrients from being transported downward, which can promote buds, branches and growth under the incision.

Wipe buds and sparse shoots

1. What are the scratching and sparse tips

Scratching buds: erase or cut it after germination.

Sparse shoots: For the densely growing annual branches, cut off a few from the base, that is, the dense new shoots are removed.

2. The role of buds

Select the best to go inferior, in addition to dense and leisure, save nutrients, improve light and improve the quality of retaining branches.

Tool and cutting

1. What is topping and cutting tips

Tool: remove the tip of young tenderness.

Cut the tip: also cut off the young shoot

2. The role of topping and cutting tips

(1) Promote the germination of side buds and secondary growth, and increase the amount of branches.

(2) Promoting the formation of flower buds is conducive to early results.

(3) Improve the fruiting rate.If the grape flowering period is top, it can significantly increase the seat fruit rate.

(4) Promote the enrichment of the buds.The new shooting of the new shoots that will stop growing in autumn can promote the buds to be conducive to overwintering.

Twist

1. What is a twist?

When the new shoot is not yet woody, the new shoots on the back, the competitive branches of extended branches at all Levels, and the temporary branches growing in the back, at about 5 cm at the base, gently reverse 180 degrees, so that the wooden and the skinny parts are affected by both the wood and the cigarette parts. Mild damage, but not broken.

2. The role of twisting

Promote the formation of flower buds.

Take the branch ()

1. What is the branch

In the long term of the new shoots, it is bent from the base to the top with the hand, hurting the wooden part, and the sound is not touched.

2. The role of the branches

You can open the angle of the branches, improve the bud rate of the branches, promote the formation of flower buds and medium short branches, and cultivate the results of the result branches.

3,Rotatingapplication

The main objects are more upright branches, competitive branches, auxiliary nursing branches, etc.

Ring peeling

1. What is ring peeling

It is peeling off the branches.

2. The role of ring peeling

The leather part is the main channel for organic substances along the entire plant.Circular stripping is used to temporarily interrupt the upper and lower transportation of organic substances to achieve the role of inhibiting nutrient growth, promoting flower bud differentiation, and improving the fruit rate.

3,Circular peelingprecautions

(1) Circle peeling time

Related to the purpose.Promoting flower bud differentiation should be carried out before flower bud differentiation, and the increase in the fruiting rate should be carried out before and after the flowering period.

(2) The appropriate depth of ring peeling

Cut until the wooden department.Too deep and easy to hurt the wooden parts will severely suppress growth.Seriously causes the ring to divest.It is no effect if it is shallow.

(3) Pay attention to protecting the wounds of the ring peel and prevent the harm of diseases and insect pests.

4. Circle peeling object

Wangshu and prosperous branches are carried out, and the weak trees and branches are not carried out.

Summary of fruit tree Revision

Talking about the fruit trees is very old, there are skills to master the laws.

First of all, use high -tech, keep the trimming time in mind.

In the spring, scratching the buds in summer, and the winter cut in the hat in autumn.

Cut the fruit trees in the four seasons, and it is expected to yield every year.

fruit trees should be trimmed five to see, and the plan is determined after watching.

At first glance, the trees should be appropriate.

Second, look at the variety of fruit trees, and the pruning method should be clear.

Three look at the age of the tree and small, and the trimming should be divided into young and old.

Fourth, look at the trees and weakness, and the weak trees are cut and ease.

Five views of flowers and less flowers, there are skills under the scissors.

The diseased and insects were cut first, and the main branch was the first.

Be careful when you stay, do not move casually.

Qiu went to Da Zhi the most secure and wound healing the safest.

If the main branch is left, there must be conditions, and you must look at it from the direction.

The main branches at all Levels are determined, and they are looking for large and small branches.

The inner hall is to be removed upright, and there is no light without light.

You can say the growth position, the scissors follow your head.

Don't bend the center of the center, always grow in the middle.

The main branches at all Levels are extinguished, and the side branches grow on both sides.

If you want to get a large and high yield, the identification of flower buds is Guan Jian.

The flower bud head is large, and the small pointed head is the leaf bud.

The flower buds are not obese, and the flower bud leaf buds are not like.

As a result, there were three types of branches, long and short and short branches.

Too dense places should be removed, don't cut short branches.

After cutting, take a closer look.

In this way, the trimming is relatively complete, and the low production capacity will change the high yield.

The specific trim is like a housekeeper.

The fruit trees are like a big family, and their children and grandchildren are melting around their knees.

Family rules are strictly associated with fruits, and the rules are chaotic.

As a fruit tree mediation person, mediation disputes.

Zhongan is better than the old ancestor, and his body is very upright.

The waist was weak and deceived, and the head was crooked and the shoulders were obliquely replaced.

Zhong Gan was born with his son, and the boss had three feet away from the ground.

The child is a few generations than the ancestors, and the figure is thinner than the ancestors.

If it is as thick as the ancestor, it will be more sparse.

The son arranged in an orderly manner and rose around the ancestral spiral.

The small pagoda type is a small pagoda.

The distance between the layer is opened, and there is light in the inner hall.

Brother is in the lower brother, and the brother will always give up the brother.

If the brother is bigger than his brother, the consequences must be terrible.

Brother was weak, and his brother was prestigious.

This behavior is terrible and should be removed from the base.

If the space is large, he can also keep him.

Rebelling his grandson.Peel at the base.

The son gave birth to a grandson, and his grandson had to control him even more.

You can't just ride the door or stand on the back of his dad.

Can't run side by side with dad, you can't stay at home.

Before and after, he lives in an orderly manner, and the brothers are orderly.

Living at the top of the top is high, and the body is Slim.

Once you get fat with your dad, you will also be driven away.

As a fruit tree pruning, the long and young are clearly ranked.

Mo regards his son as a grandson, and his brother and brother must divide it.

The grandparents were rowed well, and the trees were graceful with fruits.

If your grandchildren come to chaos, your fruit tree is finished.

The quality of the fruit is not good, so that you can wipe your tears after autumn.

I do nt know what to say, right?

A breeding method of shrimp ridge

1. Soil

Choose good drainage, loose, certain moisturizing, and rich humusearthFor soil, it can be used with humus soil or carbon soil to add an appropriate amount of river sand. It can also be mixed with ordinary garden soil and humus soil.

2. Watering

Shrimp Ridge likes a high -humidity environment. If it is placed indoors, it is not suitable for frequent watering and keeping the soil moist, but water cannot be accumulated.When the shrimp spine blooms from March to May, it is necessary to keep the soil slightly dry. It can be poured in the morning and evening from July to September.

3. Temperature

Shrimp orchids like a warm environment, so in winter, pay attention to the temperature must be maintained above 0 degrees, otherwise there will be a risk of freezing to death.

4. Light

Shrimp orchid likes the sun with sufficient sunshine. In spring, summer, and autumn, it is best to put the shrimp ridge in a Shading place, or put the shrimp orchid into a 50%Shading shadow.In winter, because the light is not so strong, it does not need to shade in the room.

5. Fertilization

Fertilize once a month during the growth period. When the flower stems are pulled out of the leaf cluster, the phosphorus and potassium Fertilizers are applied by 1 to 2 times.From May to August, Fertilizer can be applied every half month, and the concentration does not exceed 0.5 %.

6.Anti -disease

Common pests in shrimp ridges are anthracnose, soft rot, lobe blight, and scale insects. Excessive planting, poor ventilation, water disorders, or mechanical damage are susceptible.Reduce temperature and humidity, work for the final operation of the onset, and isolate and destroy.

precautions for shrimp ridge breeding

1,When maintaining shrimp ridge, it is necessary to trim the damaged parts in time to effectively increase air circulation and avoid the breeding of bacterial insect pests.

2,There are more rain in the rainy season. Do a good job of drainage in the soil to avoid rotting the roots caused by water accumulation.

1. How about Nanzhu Flower stand

Nanzhu Flower stand is a Chinese -style decorative type, and its main materials are wood with high economic value -Nanzhu.The material of Nanzhu is relatively hard, and its toughness is very good, and it is not easy to break the phenomenon.In addition, Nanzhu's environmental protection performance is also well -known, so it is loved by many consumers.Nanzhu flower stands generally need to be formulated after stitching.The Nanzhu Flower stand has the characteristics of difficulty deformation, cracking, and not easy to produce toshworms.

Second, the advantages and disadvantages of Nanzhu Flower stand

advantage:

1. Nanzhu Flower stand itself has natural heat absorption and humidity.Such a nature makes the bamboo Flower stand that can also give people a warm feeling in winter.

2. Nanzhu flower stands need to go through the stitching and setting process. In this process, natural resin is used for glue.This makes Nanzhu flower stands not formaldehyde, which is very healthy.

3. The color of the bamboo Flower stand is relatively well -proportioned, the overall is relatively stable, and it is not easy to deform.

4. Nanzhu Flower stand can also prevent the invasion of the worm.

5. Nanzhu Flower stand gives people a sense of nature as a whole, with a special charm.

shortcoming:

The disadvantages of Nanzhu Flower stand are very small, mainly because it costs a lot of glue.Only by grasping the degree of use of glue can we ensure the beauty of the bamboo Flower stand.In addition, there are relatively few flower stands made of pure bamboo on the market, most of which are combined with bamboo and wood.

Third, the bamboo Flower stand is good or the solid wood Flower frame is good

1. Material

In terms of material, bamboo is the same as solidity, and in the process of processing, the durable wood is solid wood.

2. Late

bambooFlower standThe useful life is generally five to six years. If the solid wood Flower stand takes care of it, it is possible to use it in about ten years.Because the growth cycle of bamboo is generally about five years. For up to six years, there will be various problems with bamboo flower stands, such as insects, wind erosion, water erosion, etc. Compared with solid wood, the resistance of bamboo is weaker.

3, appearance

Although the use of bamboo Flower stand is short, it looks better than solid woodFlower standMore elegant.The ancient literati and pools used Meilan bamboo chrysanthemums as gentlemen. The color of bamboo and texture was not the level that solid wood could reach.

In fact, in combination, the two types of Flower stand are actually cost -effective. The key is to depend on personal preferences.Relatively speaking, solid wood flower stands are more practical.

Pearl Orange,Red fruit thin columns, do not say, the genus of Qiancao family; place of originDistributed in South America, central Taiwan and south, the Philippines, Australia, etc.

Morphology

Pearl orange plants will be said to be Succulent plants by flower buddies. In fact, it is not. Pearl orange and quiltsceae is a herbaceous plant. The scientific name is red fruit thin column grass.Or ovate triangle, about 6 mm long, flowers without stems, top -born, single, small.Nuclear fruit spherical, red when mature, with 2 small cores inside.

Growth environment

Pearl orange is bright and bright, not drought to resist.The soil of cultivation of pearl orange should be loose and breathable.It is placed in a bright half -shaded place (the winds in the south direction are ideal), but the sun should be avoided.Potted pearl orange in summer can be placed outdoors, but it also needs to avoid direct sunlight.The temperature should not be too high.The environmental temperature of winter should not be lower than 8 degrees Celsius.Like cold and cold climate, the farming experience of the garden is the most ideal of 18-24 degrees.Watering should be watered after the surface soil is dry.If the light is insufficient, the stems and leaves are easy to cover the fruit.From the end of spring to the cooked time, it is best to put it in a place where the sun is sufficient and can block the wind and rain.

Distribution

Central and southern Taiwan, the Philippines, Australia, etc.

Cultivation technology

1. Soil selection

Pearl oranges like the soil are moist and avoid waterlogging. The soil ratio is imported by imported peat: perlite: vermiculite = 1: 1: 1 or rot leaf soil: charcoal powder: perlite: clean river sand: rural soil = 1: 0.3: 0.5: 0.5: 1 or rot leaf soil: Pastoral soil: clean river sand = 1: 1: 1 can be paved around to ensure the humidity of air humidity in the small environment. When planting, a small amount of volcanic stones are paved at the bottom to prevent the bottom of the water from the bottom of the water and breathability.insufficient.

2,LightPhoto and temperature

The growth of pearl orange requires a certain degree of light to resist semi -yin, but to avoid strong sunlight directly illuminated.During the breeding process, the plants of pearl orange should be placed under the bright scattered light, especially in summer, to shade, but it cannot be too shade, which will affect flowering and results.

The cold resistance capacity of pearl orange is strong. The suitable temperature for growth is between 10 C and 20 C. It can resist low temperature below -10 C in winter, but the temperature of wintering should be kept above 5 C.

3. Watering and fertilization

Pearl Orange likes a slightly humid growth environment. In summer, the pot soil needs to be kept moist, and it needs to be slightly dry in winter.Watering should be appropriate and ensure that watering should not be poured to the leaves or fruits, so as not to rot the plant.You can use the potting method or spray method.Fertilization should also be moderate, and Fertilizer is required every 1-2 weeks.

4,Breeding method

Division:Take the autumn division as the best period, take out the whole plant, divide it according to the shape of your own needs, gradually separate the root, re -plant it, and pay attention to moisturizing after planting. Due to the damage of the root, use aspirin when planting.The solution (aspirin enteric tablet with a piece of water 500ml): Glucose water (0.1%glucose water) = 1: 1 mix and mix it for mixing soil, mix until the soil is moist and not wet.There is no need to water for 1 to 2 weeks. Spray water once a day once a day. The weak light is maintained for 5 to 7 days, and then gradually replenished the light.

sowing:Pearl oranges can be sowed and reproduced. It is carried out from February to March and can also be divided into division and in August.Take the seeds with cooked fruit, remove the peel, dry it slightly, and then use an appropriate amount of root powder to soak the seedlings, cover it lightly on the surface of the soil, cover the peat 1 mm or laid a thin layer of fresh water moss., Then keep the temperature from 10-15 C for moisturizing and cultivation, and buds can grow in 2 to 3 weeks.

Group training:In recent years, a new method of breeding is selected. It can be cultivated with chemical agents such as medium and agonists. It can be used in large quantities for production. The product shape is relatively uniform, neat, and large breeding.

Bloom

When the pearl orange is blooming, it needs to be artificially pollinated so that the results of pearl orange can be more.

Pest

Sometimes pearl orange is infected with gray mold, and you need to pay attention to controlling the humidity of the growth environment.

precautions for pearl orange breeding

1. Avoid strong light exposure

The growth of pearl orange requires a certain amount of light to resist half yin, but to avoid strong sunlight directly illuminated.During the breeding process, the plants of pearl orange should be placed under the bright scattered light, especially in summer, to shade, but it cannot be too shade, which will affect flowering and results.

2. Pay attention to keep the pot soil properly humid and water with the "Basin Dafa".

Watering the basin method to avoid water falling on the leaves, causing plant rot.Once every 5-8 days, according to the location of the placement, the choice is to see the fruit and the edge leaves when there are wilting, but do not accumulate water.In the case of drying high temperature, you can use the spray of a watering pot to increase the humidity.The pot soil in summer is moist, and it is slightly dry in winter.After the fruit is generated, it is necessary to ensure that there is no water on the plant, otherwise the fruit is prone to rot.

3,Keep light and moderate ventilation

Pearl Orange likes a cold and humid environment, is not drought and high temperature, and avoids strong light exposure.I like bright scattered light, such as insufficient light, leaf and leaves, and loses the value of ornamental.The most suitable growth temperature is 10 ~ 18 C, and the low temperature below -10 C can be resistant in winter, but the temperature of the winter should be kept above 5 C.Pay attention to maintaining long -term ventilation and placed in a place that can block the wind and rain, otherwise it is difficult to appreciate its glamorous fruits.