Profile

iron wire fern, a family of Phoenix Fern, has a perennial herb, 0.1-0.6 meters high.Because its stems are slender and color -like, they are named iron wire fern.iron fern is a common indoor greening plant and can also be used as an indicator of calcium soil.Because of its fear of dryness and strong light, it must be placed in a place without direct sunlight for maintenance.

There are about 200 kinds of iron wire fern, which is a famous ornamental ferns.There are about 30 species in my country.The main ornamental species include whip leaf iron wire fern, Tuanyu iron wire fern, fan leaf iron wire fern, palm leaf iron wire fern, gray -back iron wire fern, white -back iron wire fern, etc.Railway fern native tropical and subtropicals, widely distributed around the world.It is widely set in Taiwan, Fujian, Guangdong, Guangxi, Hunan, Hubei and other places.Sex is warm and humid and semi -yin environment,Often born inAltitude 100-2800 metersflowIt is more common on the limestone or the bottom of the limestone cave and on the wall of the limestone cave beside the water stream.Avoid strong light.The suitable temperature temperature is 18 25 .

Nickname

Filtic grass, girl's hair, iron wire, water pig hair soil

variety

1. Fan blade iron wire fern

The leaves are the wide ovate that is not neat, and the palm -like branches of the palm -shaped branches are 2 to 3 times.Fan blade iron line fern likes the sun with sufficient sunlight, suitable for growing in acidic red and yellow soil.

2,Whip iron wire fern

Also known as Gang Mao iron wire fern, leaf -shaped lanceolate, about 10-25 cm long, the top is extended into a whip -shaped, rooting at the ground.The whip iron wire fern was born under the forest or valley stone seams of 100-1200m altitude.

3. Wedge leaf iron wire fern

The leaves are triangular, with feather -like split, and the cracks are diamond or long.Wedgeflower wire fern is often born on the limestone beside the flowing water stream or the bottom of the limestone cave and the wall of dripping rocks, and the altitude is 100-2800 meters.

4,Ruffled iron wire fern

The lotus leaf iron line fern is a relatively rare variety. Due to the destruction of nature by human production activities, the environment that it depends on the survival no longer exists.Because the ruffled iron wire fern is a better medicinal material, excessively excavated, making it on the edge of the extinction, and the amount of cultivation is small.

Morphology

The plant height is 15-40 cm.Ye Yuansheng or near life, the veins are more forks, and the edges are directly on the edge, both of which are obvious on both sides.The leaf veins are available to the two digo bifurcation, and the edges are directly on the edge, both sides are obvious.After the leaves are dried, the grass is thin, grass -green or brown -green, and both sides are not hairless. The leaf shafts, each back of the feather shaft and the small feather handle are the same color as the petiole, and often twists and turns from left and right.The rhizomes are long and horizontal, and the brown lanceolate is densely sideways.

The handle is 5-20 cm long, about 1 mm thick, slender, shiny, luster, the base is the same scales as the root stems, Smooth upward, ovate triangle, 10-25 cm long, 8-16 cm wide, 8-16 cm wide, Polymark, wedge-shaped base, most of the middle part of the middle is two feathers, and the middle and above are a strange number of feathers.Large, 4.5-9 cm long, 2.5-4 cm wide, long round ovate, round blunt head, once (two less) strange numbers, 2-4 pairs of late small feathers on the side, alternate, obliquely upward upwards, 6-15 mm apart, the size is equal or the base is slightly larger, the symmetrical or asymmetrical oblique fan-shaped or nearly oblique Square, the length is 1.2-2 cm, the width is 1-1.5 cm, the upper edge is round, with 2-4 2-4Shallow or deep crack into strip -shaped cracks, the apex of the infertile fissure, the small jagged or corrosive small teeth with a wide triangle, which can cultivate the cracks.There are small tooth-like teeth on the side, which are full on both sides.It is often larger than the side-raybal tablets under it, with a handle of 1 cm; the second pair of feathers are 2.5-5 cm away from the base, and each pair is the same as a pair of feathers at the base and gradually becomes smaller.

3-10 pieces per feather tablets per feathering, bleled from the upper edge of the last small feather tablets that can be nurtured; the flocks cover the long shape and the kidney form a round kidney shape.Membrane quality, fullness, staying.The spores are covered with coarse particles, which are often preserved after treatment.

Suitable place

Xiyin, strong adaptability, easy cultivation, suitable for indoor potted viewing.Small potted plants can be placed on the head of the case and coffee table; large potted plants can be used to arrange the window sills, aisles or living rooms of the shade room.iron fern leaves are also good cutting materials and dried flower materials.

Effectiveness and role

Viewing value

The stems and leaves of the iron wire fern are very beautiful. It is suitable for planting in rockery or gardens. It can also be made into potted plants on the balcony or window sill and in the corridor to watch.Cut the flowers for humans to place them at will.

Purify the air

The iron wire fern can purify the indoor air, absorb the harmful gases to the human body, and place it in the bedroom that is conducive to relaxation and improve sleep quality.According to research, iron wire fern can absorb 20 micrograms of formaldehyde per hour. Some people call it the most effective biological "purifier".Therefore, those who deal with paint and paint all day, or like smoking, can put a few pots of iron wire fern at home to absorb the harmful gases, and can also absorb the dickyne and toluene released by the computer and printers.

Medicinal effect

Don't look at the iron wire fern is just a pile of useless leaves. It can have antiprobium, active, relieve heat, stop bleeding, and give birth muscle.Topical treatment of bruises, fractures and bleeding, internal treatment to treat rheumatism and Bone pain, numb hands and feet, urinary tract infection, etc., have a good effect on influenza, cough, burns, snake bite, and snake bite.

Breeding method

illumination

Although the iron wire fern is a yin -ray plant, it requires a certain amount of light in the growth season.During the indoor maintenance, it is best to put it on the east or north, and its light level is ideal.

Seeping shade in the summer at noon, appropriate light in the morning and evening, and too strong light will make the iron line fern leaves zoom.If it is cultivated on the Outdoor balcony, shaded shades at noon at noon in the four seasons, so as not to burn yellow.

Humidity/watering

The iron wire fern likes a warm and semi -overcast environment. Pour water once a day during the growth period. It is hotter in summer. Pour water once every morning and evening. At the same time, sprinkle water around the leaf surface and the pots of pots to improve the humidity of the air and keep the leaves green.If there is no one in the family, you can put the Flower pot on a humid sand table, make up for the water, and water it once every 2 to 3 days.

When the temperature in the end of autumn, winter and early spring is low, the pot soil should be moist, so that the surface of the pot soil can not be dried.

temperature

The temperature of the iron wire fern is 15-20 C, and the temperature in winter can not be kept green without less than 5 C.In midsummer, if the temperature is too high, you need to spray the plant every day to increase the air humidity and cool down.

soil

iron wire fern likes loose and fertile lime soil. Families can be used: garden soil, leaf soil and sand, and mixes according to the ratio of 4: 5: 1.If you want to grow well, you can sprinkle lime powder in the pot soil to increase calcium.

Fertilize

iron wire fern is fed, but the demand for Fertilizers is not large.spring, summer and autumn are for its growth season, and apply thin liquid Fertilizer once every 30 days.Sulfur sulfur sulfur solution can be poured 2 to 3 times per month.Pay attention to proper calcium Fertilizer, so that the growth of iron wire fern will be better.summer temperature is high, minimize fertilization.The temperature of autumn gradually decreased, and in mid -October, the fat gradually stopped.

Pay attention to fertilizing, apply a thin -mouth watering pot to slowly apply along the pot. Do not let the Fertilizer stick on the leaves, otherwise it will easily burn the blades and affect the ornamental effect.

Frequently problem handling

Way of breeding

1. Substitute breeding

iron wire fern is usually breed in divisions, so as to maintain the nature of the parent.Generally, when the basin is changed in April of the following year, the size of the plant can be divided into or one in three to cultivate depending on the size of the mother plant.In addition, once the mature spores are scattered in the humid soil, it will also develop into a seedling. When it grows up, it will become a new plant.

It is available in the four seasons in the room, but it is generally carried out in early spring.Take the mother plant out of the pot, cut off the roots, so that each piece with part of the rhizomes and blades, and then plant them in small pots.The mixed soil is covered around the rhizomes, and the new plants can be obtained in the wet environment after irrigation.

2,Spore breeding

Put the peat and fine sand with the matrix in the oven high -temperature disinfection to kill germs and weed seeds.Then, put the disinfected soil in a shallow pot.Cut the leaves with mature spores, concentrate spores and sprinkle them in a shallow basin evenly, do not need to cover the soil, cover the glass slices on it, soak the water from the bottom of the pot, keep the pot soil moist, and place it in the semi -yin environment at 20 ~ 25 C.In the following, the spores of about 1 month can germinate into the original leaf body, and it can be divided into planting after full pot.Note that 1 to 2 days before the planting should be moved to the glass on the pot to breathe, so as not to cause plant rot or pests.In addition, spores are prone to spores in warm and damp environments.

Fast growth, change the basin every spring, add a small amount of brick dandruff and wood ash powder with rotten soil.During the growth period, it is necessary to water and spray water.After fertilizing once every half a month, you can choose Huiyou 15-15-30 pot flower Fertilizer.When fertilizing, the Fertilizer should not tarnish the leaves.Avoid strong light in summer, so as not to cause the leaves of the leaf margin and move to indoor maintenance in winter.

Fertilizer management

The iron wire fern is wet, and the peak growth season should be fully watered. In addition to maintaining the wet hole of the pot soil, pay attention to the high air humidity, and sprinkle water around the plant when the air is dry.Especially in summer, water is poured 1-2 times a day.

Water is wet and wet when the pot soil is wet, which can easily make the leaves yellow.Apply 2-3 thin liquid Fertilizers 2-3 times a month. Do not stick to the leaves when fertilizing, so as not to cause rotten leaves. Out of the calcium habits of iron wire fern, the pot soil should be added with an appropriate amount of lime and broken eggshell.It will be better.Reduce watering in winter and stop fertilization.

Diseases and insect prevention

There are mainly leaf blight hazards. In the early stage of the onset, spraying Bordeaux was sprayed 1 to 2 to prevent control.Pests have garaphs, and can be sprayed with 1500 times liquid of 50%malaxylum phosphorus, or 2.5%semramlly.

Leaves brown coke

The brown coke is the most prone to iron line fern leaves, which is often encountered in cultivation.The iron line fern was originally born in the wet wall seam or stone surface, which is the most dampness.Due to the strong light in summer, if the iron wire fern is not placed in a shade environment, it cannot grow normally.The direct sunlight will quickly steam the water of the leaves, and the water has not been used to absorb the water. Some of the cells of the leaves have been dehydrated, and the green will gradually fade, so that the focus will appear.

Rescue measures:

It must be cultivated immediately.

Cut the scorched leaves and spray water in time on the leaves and the surrounding ground.

Take care of it and try to avoid being stimulated by strong light again.

Black leaves

Due to improper maintenance of iron wire fern, the leaves are often dark.The reasons and prevention measures:

The temperature in winter is low, and the frost damage of late cream or early cream.The iron line fern has a warm and humid climate, which is not cold -resistant. The suitable growth temperature is 15 ~ 24 C. If the temperature room temperature is above 10 C or more, the leaves can be kept green.

Too shadow, no sunlight for a long time.The iron wire fern is afraid of the heat and cannot be exposed in the sun, but it cannot be shaded. It is best to put it under the Outdoor shade and tree in summer, or move outdoors at night, and move back to the room during the day.winter should be fully seen.

summer climate is sweltering and poor ventilation.Raise air humidity and strengthen ventilation.

Fat and water problem.The iron line fern is rich in humus, which requires sufficient fertility.Can be added to the cultivation soil to add charcoal powder and brick dandruff to improve the permeable water permeability of the pot soil. The pot soil should be wet.

precautions

1. Rizhao: Although it seems that the indoor light is not too dark, the general indoor light is still slightly darker for the iron wire fern, so it is best to place it in a bright place in the room.

2,Temperature: iron wire fern likes cold climate. The growth temperature is between 15 C and 25 C. The temperature of the leaves cannot be lower than 7 C, otherwise it may have frostbite the leaves.

3. Moisture: iron wire fern is very like a high -humidity environment, so in the three seasons of spring, summer and autumn, should be watered 4 to 5 times a day.

4,Fertilization: Fertilization is necessary for iron wire fern, but grasping the principle of "a small amount of more", and use 1000 to 2000 times the diluted solution with flower treasures.

In addition, if you want to raise iron wire fern in your family, you should still do the following:

The iron wire fern likes warm and humid and half -cold environment, and hate the direct sunlight.

Fern plants grow in a humid environment. For iron wire fern, naturally, it is no exception.

You need to change the basin once a year, while trimming the dry leaves and old roots.

Recommended reading

[Interior Observation Plants] What are the common indoor leaves?Different habits of indoor leaves, different maintenance

[Green Luo] Green Luo's breeding methods and precautions for Green Luo Conservation Knowledge Collection

[Wenzhu] How can we raise the method and precautions for the cultivation method and precautions of Wenzhu to grow more vigorously

[Tiger Pilan] How to raise Tiger Pi Lan's breeding method and precautions

[Rich bamboo] How to raise wealthy bamboo breeding methods and precautions for wealth bamboo

[Queen Yin Queen] How to raise the Yin Queen's breeding method and precautions

[Guangdong Wannian] How to raise a breeding method and precautions for Guangdong Wannianqing in Guangdong Wannian

[Ivyevang] How to raise Ivy's breeding method and precautions for Ivyevo

[Spidering orchids] The breeding method and precautions of spidering orchids in chirling orchids

[Turtle bamboo] How to raise a turtle back bamboo breeding method and precautions for Turtles back bamboo

Pocket coconut How to raise pocket coconutsThe breeding method and precautions of pocket coconut coconut

How to prevent frozen frozen winter

1. Temperature Guide

In winter, the most important thing for succulent is the temperature. Master it well. Succulent plants can not only overwinter, but also become obese.

First of all, the flower friends should pay attention to the Outdoor temperature below 5 C, and take the succulent into the indoor or balcony; when the Outdoor temperature of the large area is lower than 10 C, the lotus palm, silver wave brocade, black mage, Xiong Tongzi, etc.Succulent plants should be quickly returned to the room.

In addition, the minimum temperature of the indoor environment is higher than 0 C, and the flesh can be safe to pass the winter; if the minimum temperature can be kept above 10 C, the Succulent plants will grow normally, and the flower buds can still add a little diluted organic nutrients that are diluted 500 times when they can dilute the organic nutrition of 500 times.Liquid is poured in fleshy to improve cold resistance.

Master these points to make your Succulent plants go smoothly!

Watering Guide

In winter, watering for succulents is the key to the state of succulent. If it is a relatively small succulent seedlings, then there will be more moisture it. It can be frequently watered to keep the soil a certain humidity.And try to put them in a warmer place, grow in a more stable environment.And the large Succulent plants will have much stronger resistance. Watering must be less, and it is not a problem to water or even a drop of water for a month.

Master these points to make your Succulent plants go smoothly!

Third, water spray guide

In addition to normal watering, it is important to spray water appropriately according to the weather.Because winter is also the most beautiful when Succulent plants need to seize this opportunity.It is generally recommended to spray water in the fleshy when it is sunny. After entering the winter, keep the air a certain humidity. With the temperature difference, the fleshy color will be faster.

Master these points to make your Succulent plants go smoothly!

Fourth, light guide

Light is too important for winter meat. As long as the flower friends have sunlight, they can take a few hours for a few hours.Even if you take the fleshy all day in winter, as long as there is the sun, it is okay.You will find that the fleshy of the sun is called a beautiful color.

Master these points to make your Succulent plants go smoothly!

Five, fertilization guide

In winter, many fleshy plants do not need to fertilize, but for the "winter species" and "intermediate species" that are still growing, they need to supplement certain liquid Fertilizer. flowers can use the organic nutrients fermented by pure plants at noon, the organic nutrition fermented with pure plants fermented with pure plants fermented.The liquid is 500 times the water, and the flesh is poured to supplement the nutrition to the succulent to grow obese.

1. Burning pot

The plain pot is a mud tile pot. It is the most commonly used plant container. It can be divided into two types: red and gray pots.There are various specifications, the smallest diameter is about 10 cm, generally 14_33 cm, and the larger is 39 59 cm.The water and exhaust drainage performance of the plain pot is good, which is conducive to plant growth. It is widely used in the cultivation of seedlings and the cultivation of seedlings.This kind of Flower pot is not enough. It is rough. When cultivating finished seedlings, you should try to use a small pot as much as possible so that you can place it in a slightly larger pot when displaying decoration indoors to make up for the shortcomings.

2. Zisha pot

Various flowers and plants are engraved on the purple sand basin, with a variety of styles, harmonious colors, simple and elegant, and antique beauty. It is more suitable for small leaf species for small leaf species on the indoor countertop.The disadvantage of this basin is that the water permeability of the water is slightly worse, and the appropriate species must be selected when used.

3. Plastic basin

Plastic pots are one of the commonly used plant containers for indoor leaf -viewing plants. They can be divided into hard plastic pots and soft -holding plastic basins.Hard plastic basins are generally small in size, light and beautiful, colorful, and are mostly used for viewing and cultivation, but their ventilation is poor and not conducive to growth. Therefore, it is not suitable for long -term planting.It is only used, and it must be loose, ventilated and drained multi -porous substrates with good ventilation and drainage performance.The soft plastic basin is only used for the nursery of indoor leaf -viewing plants, and is generally not used for ornamental cultivation.Can plastic Flower pots raise flowers & gt; & gt;

4, glaze basin

The glaze pot is strong and gorgeous, but the drainage ventilation performance is poor.It is often used as a pelvan, which can also be used directly to cultivate large leaf -viewing plants, but it must be equipped with loose porosity matrix, otherwise the plant growth is poor.

5. Wooden basin

The wooden basin is used to cultivate large leaf -viewing plants and can also be used to cultivate some fleshy.Its specifications can be determined according to actual needs.This kind of inside and outside of the pot can paint different colors to improve the service life and coordinate with the color of the plant.It has a light scenery, good breathability, strong water and Fertilizer, low cost, and low cost. It is suitable for planting of various flowers. In addition, it can also be determined and processed according to the shape, size and cultivation of flowers according to the shape, size and cultivation of flowers.This pot is easily rotted by the erosion of water, Fertilizer, and microorganisms, and has a short service life.

6. Cement basin

Cement Flower pot is usedCementPlaced it.It is simple, with different shapes, and moderate weight, but it is suitable for garden and balcony greening.

7. glass basin

The glass flower is not breathable and cannot be watered.The glass is transparent and you can see the internal moisture.In summer, the glass flower must be placed in a cool place.Put the water layer with a glass flower, you can use pottery grains or large light stones. This individual is casual.The glass flower is suitable for leaf insertion.

8.Porcelain basin

Porcelain pots are fired with porcelain soil, which is the best in the ceramic basin.It is bright in color, beautiful in appearance, and many varieties of color, but it has poor breathability and water seepage. It is difficult to master the wet and wetness of the pot soil with this pot.It is best not to plant flowers directly, only suitable for flowers for flowers.

precautions

In addition, there are all kinds of materials for decorative materials, such as glass tanks, vine products, stainless steel clads, etc. This type of pot is beautiful and generous, which can add a gorgeous and colorful atmosphere.But for display, not cultivation.

Miscellaneous wood bonsai type

Miscellaneous wood is all -encompassing, and it can be divided into five categories according to the ornamental nature.

1 , Observation: Strange shape, good -looking elegant and elegant pairs of sections of aslene (Hubei Jingshan Specialty), Jiulixiang, Rongshu, Chinan

2 , Observation: The leaf color is beautiful.

3 Watching flowers: flowers are overflowing, flowers and trees are peculiar, the most common and most favorite bonsai types such as plum blossoms, Ziwei, azalea, camellia, June snow, safflower beef, gardenia, and gardenia.

4 fruit: There are flowers and fruits, the fruit is good -looking or even diet.

5 , Guanjo: Graceline, entangled like gold and silver flowers, ivy, wisteria.

Making of mixed wood attached stone bonsai

1. Selection of stones

In fact, there is no special requirement for the choice of stone.If you don't have any materials on hand, you can just make a cobblestone and pave the road.It is recommended to jade rough, that is, the waste of the gambling stone; you can choose the traditional strange stone; commonly used British stones, stalactites, sandstones, turtle stones, yellow wax stones, pine stones, pine stones, Shoushan stone, etc.Stones can be legally processed by cutting, carving and cement adhesion.

Second, the choice of tree species

There is nothing to use in the tree species of miscellaneous wood bonsai, there are not many requirements.

Three or three styles

1. Tree roots holding stone: Take the old pile with a long root system and a beautiful posture. According to the characteristics and creative intentions of the selected stone, follow the texture of the stone in the stone gap, and then wrap it with a fine iron wire, fill in the stone cracks, fill in the stone seamEnter the mud, and the stone is planted together to maintain it in the deep basin.In the future, according to the growth situation, the mud is gradually cut off, the wire is removed, the iron wire is removed, the roots are revealed, and the fine roots that affect the aesthetics are trimmed, and then the excess soil is removed with water to plant it in a shallow basin.Of course, the seams on the stone can not be natural, allowing fraud to cheat.

2. The trunk embedded stones: open the surface of the stone according to the shape of the trunk, and then stuff the trunk in. After a period of time, the trunk is perfectly filled with the stone groove, and then slowly rolled on the surface. It is also very good.EssenceThe most ideal state is to make tree stones.

3. Stone planting bonsai: The stone planting bonsai should be said to be the ultimate of the stone bonsai. There is no Flower pot or soil.It is said that its production method has been lost, but it is not difficult to think about it. It is worthwhile to wear a text. When I do it next time, I will pass the process.

The stone with the stone bonsai is one side, and it is the other side of the stone. The stone is shaped according to the normal bonsai, but the shape of the stone must be considered to make the overall coordination and perfectly blend.

The biggest taboo of the attached stone bonsai is the detachment of the tree and stone. Whether it is root or a trunk, the place to be attached should be tight and cannot be suspended.

How to maintain the mixed wood bonsai

1. Daily maintenance

In simple terms, it is nothing more than frozen, winding, watering, fertilizing, insect -proof, combing branches, and adjusting light.

1. The anti -freezing problem is not prominent in the south. Most of the tree species are outdoors outdoors.It should be noted that many people like to move the bonsai back to the room to watch in winter. During the reactoring, the sun is not in the sun. For most of the plants that like the sun, the tree gas will be damaged.It is reminded that when the spring flowers are swollen outdoors, especially be careful not to move it.Adaptive exercise should be performed step by step. First, ventilate in the room first, then choose the temperature suitable for sunny days, exercise in a short time, and then move back to the room at night.In addition, the room temperature is too high and harmful. If the plant cannot be dormant or wakes up early, it also affects the tree gas.

In summer, pay attention not to store in the air -conditioned room for a long time, otherwise it is easy to cause the tree to weaken, because it is a life body.In the middle and lower reaches of the Yangtze River, it is often found that the trimmed branches have no teeth without teeth within 3-5 cm, and the covering damage is available.

2. The problem of avoidance of wind is simple, that is, when it is stored outdoors, try to store it at the sun -shelter as much as possible.Pay special attention to the changing pots in early spring. The wind is easy to cause water, and the water spraying measures for plants can be taken to slow down. However, it should be noted that the water is only sprayed on the plant, and the soil should not be too wet.

3. Watering problems, water is required during the life cycle of the plant.It is best to soak; when the Outdoor wintering cold current comes, water should be poured in advance, which is of great benefit to improving the cold ability of the plant.

4. Fertilize the problem of fertilization, grasp the principle of "thin Fertilizer, eat less meals", and those who are weak in tree qi must not be "fierce medicine". The key is to pay attention to the dilution rate of Fertilizer.It is best to use fermented organic Fertilizers to effectively reduce the potting of the pot soil.Many people have poor maintenance, Gain is too "hard work", and fertilization is too frequent.

5. Preventing diseases and insect pests, occupy an important position in maintenance.Pay special attention to oily secretions and other plants such as elm tree and other plants, which affects the photosynthetic effects and find that late consequences are unimaginable.Add the leaves when killing the leaf surface in daily pesticides, and the effect is very good.The key to medication is to prevent early. After the spring, you can spray pest.The weaker the growing plant, the weak the resistance.Fortunately, there are often less insect pests. Even if there are insect pests, they are often worms who eat leaves, which are controllable.Only the pests of the pests of the tree juice are even more terrible. If you find how much it is not timely, you need to pay more attention.

6, combing branches, the denseness of the branches affects the ventilation and light, and it is easy to die with weak branches.Plants are either leafy or healthy. The top of the crown should be taken appropriately to increase light to benefit growth.

Second, turn the pot and change the soilPlants shrinking branches is mostly caused by malnutrition. Changing the soil is an important way to improve the growth conditions of plant growth.It is also difficult to work to change the pot to work, but it is necessary.There are not many middle skills, the key is the trimming of the roots and the use of soil.There are still something else in the bonsai and cultivation in the cultivation.Miscellaneous water control is not feasible, and the Fertilizer is controlled.Some people in the formation bonsai are practicing less soil, and the custody of the pot is slowed down.I think that the soil still needs to be replaced, but the root beard can be trimmed appropriately. The life of the plant will not affect it. Of course, you cannot "just care about the whole camel, regardless of the camel's alive."In practice, fine soil can be used for molding bonsai. It should be used to use coarse granules for raising bonsai, which is more beneficial to the growth of the root system.The soil of the pot must be dry. It is best to go through the sun, otherwise the soil transmission is worse after changing the pot.Flower pots should also be washed and disinfected (dried) to reduce eggs.The trimming of the tree roots is an important part of the pot.

Third, styling

The shape of the shape is the place of bonsai art, which has always been valued.The key is to control the pruning frequency.Usually miscellaneous wood bonsai is trimmed at least twice a year.It can be cut in early summer and germinated like spring; the second time in the early autumn, it will germinate again, and the leaves born will generally not fall in winter.

How to grow eggs and trees

1. Time

The fruits of eggs will naturally crack when they are mature. At this time, the seeds need to be taken out. After planting, the planting time can be sowed. The planting time is generally in spring or summer.At this time, the temperature is higher, the plant grows fast, and it is very easy to take root.If in autumn and winter, low temperature will inhibit the root of the seeds.

2. Gun budding

In order to increase the sprout rate of eggs and flower seeds, the seeds need to be germinated before sowing.Soak the seeds into the water, take it out for 8 hours and put it on the wet paper towels. Regular water spraying water to keep the paper towel moist, usually sowing after one or two days.In addition, it can be soaked with potassium permanganate solution, which can also have the effect of disinfection.

3. Potted soil

If you want to make eggs grow well, you must prepare a suitable growth soil. Usually mixed with peat soil and perlite. The proportion of the two is 3: 2.At the same time, it also has a certain water retention ability, which can create a moist environment and help seeds germinate.

4. Sowing

Sprinkle the seeds of egg flowers on the surface of the soil, cover a layer of fine soil, and then water it appropriately to keep the soil moist and pay attention to avoiding light.The temperature should be controlled between 18-24 C. Generally, it usually takes germination 8-12 days in spring, and it only takes about 5 days in summer.When the seedlings grow into a certain height, transplant can be transplanted.

Egg flower breeding methods and precautions

1. Soil

Egg flowers should be used with loose and fertile, drainage and breathability of sandy soil with high humus and humus content. It can be mixed with rotten soil, garden soil and sediment.Growth and development.

2. Watering

Egg flower likes a moist environment, has a certain drought tolerance, and is afraid of waterlogging. Therefore, watering of egg flowers must follow the principles of drying and wetness and watering.Pour water once every 1 to 2 days in spring and autumn; the amount of watering each time in summer is appropriately increased. When it encounters rainy or cloudy days, reducing watering appropriately, draining water in time, and preventing rotten roots;run.

3. Light

Egg flowers are strong -positive flowers. The more sunshine, the more lush growth, and the blooming aroma; except for a week after the pot is changed, it will be placed in the sun in the rest of the time.Plant leaves cause dryness.

4, temperature

In late October, the plant should be moved near the indoor south window to pay attention to ventilation and light; pay attention to the ambient temperature during winter maintenance, and it can be transplanted indoors for maintenance to ensure that the indoor temperature is at 10 C, the temperature is low, and it will be lower.As a result, the plant is fallen in advance.

5. Fertilization

From June-November is the peak season of eggs, and the rotten liquid Fertilizer is applied to egg flowers every 10 days, and the concentration is controlled at about 15%.Pay attention to the growth of the plant during flowering, apply Fertilizer in time after flowering, and supplement the nutrients consumed during flowering.