Articles in Tags flower gardening

Antlers Begonia, nicknamed smoked chrysanthemum, Fanxing family, antlers and begonia are perennial flesh -quality shrubs, leaf pink green, high fleshy, bases are combined with three edges, and the whole plant is tightly drooping.flowering.

Native to southwestern Africa, China has introduced cultivation.Pleasant warm and dry environment.Drought resistance, afraid of high temperature and humidity.Require loose sandy soil land.The best temperature for winter maintenance should not be lower than 15 C.It is easy to reproduce, generally cuttings.Its leaf -shaped leaf color is more beautiful, colorful, and high ornamental value.

Morphology

Multi-pulp meat shrubs, 25-35 cm height, old branches gray-brown, woody, tender and greenIn color, the branch has a section.

Leaves and each other are alive, and 2 leaves are located in the base.The leaves are half -moon -shaped, triangular, pink green to gray -green; the leaf end is narrow, the apex is sharp, the leaf tip is slightly pink, the leaf back has keel -like protrusions, and the side buds to the leaf axis extend.The leaf length is 2.5-3.5 cm, and the width is 0.3-0.4 cm.

The flowers are large, the top, with short stalks, single or several times, the stems of the flower are 3.5-4.5 cm.The petals are white and the stamens are yellow.The meat quality, the majority of the seeds.winter flowering.

Growth environment

Antlers Begonia is warm and dry and the sun is sufficient, not cold -resistant, drought -resistant, and afraid of high temperatures. Pay attention to Shading in summer, otherwise it is easy to wrinkle on the surface.The temperature in winter is best not less than 15 C.It is suitable to grow in sandy loam soil with good drainage, loose, and breathable.

Distribution

Located in southwestern South Africa, the population is distributed from southern Namibia to the northeast of Ritter Feld.China has been introduced and cultivated in various places.

Breeding method

Cuttings: The best in spring and autumn.Choose a chargeReal and mature stem nodes, cut into small segments of 8-10 cm.In the micro-tide sand bed, the room temperature is kept at 21-25 C.After cutting, 15-20 is rooted, and the front leaves of the hair will have severe wrinkles, which is normal.After 3 cm in length, potted pots can be moved.The growth rate of the group is accelerated.

Sowing: In the spring of April to May, the indoor basin was used to broadcast, and the temperature of the germination room was 20-24 C.The roots of the seedlings are fine and shallow. Watering needs to be cautious. It is best to spray the watering pot.Keep moist and cool, move seedlings after one month.

Cultivation technology

Soil: It is better to breed the soil for the soil of the antlers.

Environment: Antlers Begonia should be kept in a sunny environment.

Watering: Antlers Begonia does not need to keep the soil humid for a long time, and keep the soil dry. Therefore, watering should be moderate. This kind of drought is resistant to drought and dies, but it is easy to rot because of accumulating water.

Pests and insects: When the potting of the antlers Begonia is too much humid, the root causes are often occurred, and the 3% Dan particles can be used for prevention and treatment.Pests are harmful to garaphs, and 55%killing pine emulsion oil 1500 times liquid to kill.

illumination:If the antlers and begonia burst, it must be shade in summer, because its growth does not require a strong light, and the appropriate Shading treatment can avoid slow plant growth. At the same time, it can grow in a breathable position to grow.Quick and lush.

temperature:Antlers Begonia's temperature requirements are relatively high. Generally, in an environment of about 20 degrees, it can grow healthily and thrive. If the temperature is too high in summer, the antlers and begonia will stop growing.In winter, when the temperature is lower than 15 degrees, it will also affect its growth. This will affect the chance of the plant explosion and the phenomenon of frostbite the plants.

Four seasons maintenance

spring: Change the pots in spring every spring, and trim the whole plant. Add fertile peat soil or corrupt leaf soil andThe mixed soil composed of coarse sand can be sprayed a little.In the spring growth period, it is based on keeping the pot soil.

summer: Antlers Begonia is half -dormant in summer, which can be kept in semi -yin and keeping the pot soil is not too dry.However, if direct radiation is adopted, the direct -to -leaves will occur or even burns. Because the steaming effect is too strong, the blade cracks or produces wrinkles.It is recommended to place scattered semi -yin in summer.The sunshine time is reduced to 2 hours a day, while the number of watering times is reduced.

autumn: Antlers Begonia started to grow after autumn, fertilizing once every half a month.

winter: Antlers Begonia grows in winter and leaves.When the room temperature is kept at 15-20 C in winter, flowering continues.After 2-3 years, the potted plants need to be re-updated.

Main value

Antlers and begonia plants are often clustered, and they are often used in potted plants or Hanging in Europe and the United States.Potted plants.The green and thick leaves extend outward, with a good sense of Hanging.planting with other varieties of succulents can also play a very good embellishment.When the flowering season blooms, the golden and bright flowers add a lot of color to the potted plants, Hanging it indoors, which is more vibrant and highlights the festive atmosphere.Because of its simple maintenance, easy reproduction, and strong habits, it is also used to lay out succulent plant theme parks. It is an excellent ornamental flower variety.

What should I do if my horn begins is wrinkled

Antlers Begonia is a kind of succulent plant that likes water. Wiring of antlers and begonias is likely to be a reasons for the lack of water.When the antlers are wrinkled, you need to water the antlers and begins in time, and you need to pour it through, and then put the antlers and begins in a well -ventilated place.It is necessary to water it when the pot of the antlers and begins should be watered when it is dry. When watering, try to avoid pouring on the antlers' bells of the antlers.

In the summer, the antlers and begonia will enter the semi -dormant period. Watering should be controlled. The suitable watering time is in the evening.By the time of the growth period of the antlers and begonias, the frowning of the antlers and begonia has not improved, and it is necessary to consider whether the root of the antlers and begonia must have a problem, and the antlers can be dug out of the soil.

What should I do if the antlers Begonia

Antlers Begonia is long, usually lack of light, light light, and more watering.The antlers Begonia has no way to change it back, but you can wait until the growth period of the antlers and begonia -spring and autumn. After cutting the top of the antlers and begonia, dry the wound and cutting.Note that in the future breeding, in the three seasons of spring, autumn, and winter, there must be sufficient light for the antlers and begonia. If the light is limited, you can properly control the watering.

precautions for Antlee Begonia

1. If the antlers Begonia is potted, it requires that its pot soil needs drainage and ventilation.The soil humus cannot be too much, and the general soil is fine.The size of the pot is determined by the length of the roots.

2. Antlers Begonia do not like moist or dry. Generally, it is recommended to water the cement soil without drying or watering. To maintain a certain humidity in summer, you can pour more water on the leaves.

3. The growth of antlers Begonia is generally recommended to use the light. In summer, because the temperature is too high, it is recommended to place them in a shade to keep the soil.spring and autumn grow strong, so you can make appropriate light,

4. In the growing period, the antlers Begonia is generally recommended to fertilize in spring and autumn. The Fertilizer is thin Fertilizer.

5. The temperature for the growth of antlers Begonia is recommended to be around 20 degrees Celsius. If it is lower than 15 degrees Celsius and it will not grow, but it will stop growing or even wrinkles.And try to place it in a cool place in summer.

[Polynuts and immortal birds] How to raise succulent birds with unbelievable birds in wide leaves

Living habits of succulent unbeatable birds

Broad -leaf non -dead birds are like light and water, especially when the number of watering times in the summer should be reduced to prevent rotten roots.

The sun is full of warm and humid environment, which is more resistant and cold -resistant. It is suitable for growing in acidic soils with good drainage.Drought resistance.Frequent fertile sandy loam with good drainage.The growth temperature is 13 to 19 C, and the temperature in winter is 7-10 C.

The cultivation skills of succulent undead bird

Broad -leaf undead bird has strong adaptability and extensive cultivation management.3 parts of rotten leaf soil and 1 mixed cooperation substrate can be used in potted plants.The new seedlings of the newly pot must be topped in time to promote branches; for the older plants, the stems are semi -woody, off their feet, and do not stand up. The ornamental value is reduced.

Broad-leaf immortal birds usually have to water and then pour it. Fertilization does not need to be too diligent, otherwise it will cause prosperity and may cause plant rot. It can be applied 1-2 times a month in the growth season.summer should be shaded slightly, and there should be sufficient light in other seasons, otherwise the color of the leaves will disappear.After the autumn is cold, watering should be reduced. After the room temperature is entered in winter, it can be overwinter as long as the room temperature is kept above 0 C.But the pot soil home is slightly moist.

The broad -leaved birds are slightly watered during the long term, keeping the pot soil moist, but cannot accumulate water.The temperature of autumn and winter decreases, and watering should be reduced.Blossom in winter and strictly control watering, but don't forget to water.Fertilize once a month during the growth period.When the stems and leaves grow too high, we should get rid of the plant shape and promote the many branches.Update the pots in spring every spring to maintain a beautiful plant state.

The method of breeding of succulent birds

Broad -leaf immortal birds are commonly used for cuttings, indefinite buds and sowing.

1. Cuttings

Broad-leaf immortal bird cuttings are the best in May to June. Put strong blades on the sand bed and stick tightly with sand to keep the humidity.One week after insertion, small plants can be made from the lack of leaf margins.After it grows, cut into the pot.

Put the branches, cut the top branches at 8-10 cm long, insert a sand bed after drying, start rooting after 1 week, and can be potted after 2 weeks.It is easier to breed the buds, and the growth of the leaf margin can be directly pelvised.

2. Unexpected buds

There are many small buds on the large leaves of the undead bird. Remove the large uncertain buds on the leaves, sprinkle on the farming soil, spray appropriately, and the cool ventilation will basically grow up. It can be carried out throughout the year.

3. Sowing

The seeds are small, and the soil is not covered after sowing, about 12-15 days, and the germination rate is very high.

4. Diseases and insect prevention

Broad -leaf immortal birds mainly have gray mold and white powder disease. It can be sprayed with 1000 times liquid of 70%methacotobettus wettable powder.For the harm of the sental insects and aphids, it can be sprayed with 40%liquid lotus oil.

Brief introduction to the fleshy bird

Undead birds, also known as flowers butterflies, take root.Sedow Koga blue dish.Native to Africa.

Undead bird, perennial meat quality herbal.As the name suggests, it has a strong vitality, and it can survive all places with soil.Its leaf long spindle -shaped, thick meat, raw, dark green with beautiful brown lines, especially the chic leaves are jagged, and the buds will grow on the side of the teeth, just like the two sides of the leaves are neatly stopped neatly.The two rows of small "butterflies" are interesting. These uncertain buds are easy to fall off, and they will grow into new seedlings on the soil. Once they are planted, they can breed themselves.In winter, red bell -shaped flowers, umbrella -shaped inflorescences, flowers have a long life.

Undead birds have strong habits, easy to plant, are not strict with the cultivation soil, and potted containers are relatively casual.Several seedlings are planted in small Flower pots to create tropical coconut landscapes.Immortal birds are full of sunlight, warm and humid growth environment, and are more suitable for planting outdoors. In winter, it can resist low temperature at low temperature in the short -term freezing point, severe freezing and snowy days. It should be moved to the room immediately.If it is placed in the room for too long, the plants will be weak and weak, poor growth, and affect the ornamental effect.

The spots of the immortal bird-the immortal bird brocade, the stems and leaves are all pink halo, and the seedlings born of the leaves are even more bright and charming, but because most of the seedlings lack chlorophyll, once they leave the mother plant, they cannot grow into a new ones.Plants.Breeding ability is not good.

The similar varieties of the undead bird are "Jin Die". The leaves are slender and round -like. The surface of the leaves is green with purple brown spots, and the stems are thin.EssenceOpen orange -red bell flowers in winter."Undead birds" of Polymony Observation

The maintenance experience of not dead birds

The genus of Meridiaca blue vegetables is also called the rooting roots and the immortal bird (there are many varieties of undead birds). As the name suggests, it is not easy to die.Big leaves are not dead birds are perennial meat -quality herbaceous plants.Stems stand upright, cylindrical, Smooth hairless, hollow.The leaves are raw, the leaves are rod -shaped, and the tip of the leaves has irregular jaggedness. The director of the gap has a small plant -like sprout.The inflorescence is cone -shaped, the corolla bell, rolled slightly outward, the flower is pink, and a small amount of drooping will be upward. The flowering period is from December to April.Like warm, humid environment, requires sufficient sunlight, good ventilation, and cold tolerance. It cannot be lower than minus 2 degrees in winter. It is best to keep 0 degrees or more. This temperature is relatively large.The small buds and tiny seedlings of the rod leaf falling birds can bear minus 5 degrees under the dry pot soil and will not freeze to death.It may be related to the moisture carried by their blades.

After experiments in the sun room, large plants below zero will frostbite, and the leaves are frozen -shaped. After the sun comes out, the leaves will slowly turn white and wither.Undead birds do not require much requirements for the soil, breathable, and ordinary vegetable garden soil can be raised very well, not as difficult to raise.Breeding can be cut with cuttings, or the larger uncertain buds on the leaves can be removed. It can be sprinkled on the farming soil. Spray appropriately. The cool and ventilated will basically grow up.The more light the light, the more beautiful the plant, and the compact leaves.Bange leafless bird is very resistant, and it will not die without giving water for 1 month.

Multi -fleshy non -dead bird breeding method

Undead bird is an alias of the plants of the Sedotae plant rods. The rooting is a succulent plant in Jingtian family. There are very many varieties, but the breeding methods are basically the same.Undead birds like warm, humid, sufficient sunshine, and good ventilation. It is best to keep the temperature above 2 degrees in winter, and it can be safe and winter.The small bud seedlings that have been rooted on the ground can also survive when the pot soil is dry. It may be related to their own leaves that are rich in moisture.It is not cold -resistant to landing. Large plants below zero will be frostbite, and the leaves are frozen and frozen. After the sun comes out, it will become white and withered.The rooting root has no requirements for the soil. As long as it is ventilated and breathable, the soil in the general vegetable garden can also be kept well.The reproduction method of undead bird is cuttings. Take the larger uncertain bud from the leaves and sprinkle it on the farming soil.

The landing root is a succulent plant in the family. There are many varieties, but the breeding methods are basically the same.Undead birds like warm, humid, sufficient sunshine, and good ventilation. It is best to keep the temperature above 2 C in winter, and it can be safe and winter.

Roots: The small bud seedlings falling on the body can also survive when the pot soil is dry, which may be related to their own leaves rich in moisture.It is not cold -resistant to landing. Large plants below 0 C will be frostbite, and the leaves are frozen and frozen. After the sun comes out, it will become white and withered.

The rooting root has no requirements for the soil. As long as it is ventilated and breathable, the soil in the general vegetable garden can also be kept well.The breeding method of undead birds is cuttings. The large uncertain buds are removed from the leaves, and it can be sprinkled on the farming soil. Proper spray is performed, and it will grow up when placed in a cool vent.The more feet the light grows, the better the growth of the plants, and the compact leaves.Undead bird is very resistant to drought, and it will not die without watering for a month.

Profile

Pocket coconut, also known as Xiuli bamboo coconut, Pocket bamboo, Dwarf coconut, Dwarf Brown, living room Brown, Happy Brown, Pocket coconut sunflower, and Pocket Brown.Palm family bamboo brown is an evergreen small shrub, and the potted height generally does not exceed 1 meter.Its stems are upright and have irregular patterns.

Native to northern Mexico and Guatemala, with about 120 species of plants, mainly distributed in tropical regions in China.Its sex is high temperature, high humidity and semi -yin environment.The appropriate growth temperature is 20-30 C, 13 C enter the dormant state, and the wintering temperature is 10 C.Its plant is short, and its Latin name "Elegans" means beautiful.Because the plant type resembles a tropical coconut tree, the shape is small and exquisite, and the beautiful view is unique, so it is named Po Zhen coconut.Coupled with its yin resistance, it is very suitable for small and medium -sized potted plants.

Nickname

Beautiful bamboo festivals, pocket bamboo, dwarf coconut, short brown, living room brown, happy brown, pocket coconut sunflower, pocket brown.

Morphology

Evergreen small shrubs generally do not exceed 1 meter.Its stems are upright, regardless of branches, dark green, with irregular patterns.The leaves are generally born on the top of the branches, feather -like cracks, lanceolates, each other, dark green, and shiny.14 ~ 22 cm long, 2 ~ 3 cm wide, and the bases of the two feathers at the top are often combined with fishtails, tender leaves green, old leaf dark green, and shiny on the surface, such as wax products.Earlings of the meat are axillary, yellow flowers, small spherical, male and female, and the male inflorescences are slightly upright.Flower spring.

Suitable place

Usually, we will use pocket coconut to decorate the living room, conference room, bar counter, study and other places in some places. It can make the indoor look more tropical characteristics and atmosphere.

Effectiveness and role

Green viewing

Pocket coconut plants are small and exquisite, beautiful in shape, elegant attitude, thick green and bright leaves, flat leaves, adult plants are like umbrellas, dignified and dignified, simple and beautiful, bright leaves, jade and crystalline, giving people sincerity, simple, full of vitalityThe sense of view has high ornamental value.

Family decoration

The pocket coconut is sexually resistant, so it is very suitable for small and medium -sized potted plants in the room. The desktop of the case is set. It is a treasure on the stage. It is also appropriate to suspend the room to decorate the space, which can add a tropical atmosphere and charm of the indoor.The corner of the room or on the coffee table can add a breath of business indoors, so that the room shows a charming tropical scenery.

Purify the air

Pocket coconut is the smallest coconut plant. It looks like a tropical coconut tree with a small shape and is small and unique. It presents an unique tropical style in the room.There is a certain sterilization function, high steaming effect, which is conducive to increasing indoor negative ion concentration, and can also increase the humidity of the room, which is beneficial to our Skin and appeal.Because pocket coconut can improve indoor air quality, it is called the "high -efficiency air purifier" in creatures, which is very suitable for placing indoors or newly repaired rooms.

Breeding method

illumination

The pocket coconut is half -shade, and the leaf color will be yellow under the strong sunlight; if it is placed in the lack of light for a long time, the plant will become thinner.So it is best to place the window in the window.

Humidity/watering

Pocket coconuts are like water. During the growth period, keep the soil moist. When the dormant period, wait for two -thirds of the pot soil to dry.In addition, if the coconut coconut is highly high, if it is too dry, the tip of the leaf will become brown.Therefore, during drying, it is necessary to take measures such as regular water spraying to the leaves to improve the air humidity around the plant.

temperature

The coconut coconut is warm, the growth temperature is 18-24 degrees Celsius, and 13 degrees Celsius enters the sleep.It is best not to be less than 10 degrees Celsius in winter.

soil

Puts of coconut potted plants can generally be made with rotten soil peat soil plus 1/4 river sand and a small amount of basic Fertilizer.It is best to plant with good drainage, loose and fertile loam.

Fertilize

Pocket coconuts do not have high requirements for Fertilizers. Generally, the liquid Fertilizer is applied 1-2 times a month in the growth season, and it is slightly fertilized or not fertilized in the end of autumn and winter.Change the basin every 2-3 years in spring.

Soilless cultivation

Cultivation of pocket coconutless coconut without soil -free cultivation is the method of using inorganic Fertilizer solution, that is, the method of cultivation of nutrient solution.Pocket coconuts like to cover the environment, and should not be placed near the south window. It should be placed on the window sills of the north, east, and west, or is equivalent to it.The leaf color is thick green in the darker part, and the leaf color is yellowish green when the light is direct.Too much strong light can produce coke leaves and dark spots.The optimal growth temperature is between 20 and 30 C, entering dormancy at 13 C, and not lower than 10 C in winter.

Master the principle of wetness and wetness.To reduce the amount of water in winter, it is best to pour in cold water.Make clean in summerrainwater.Frequent water spray water on the leaves and the surrounding ground to maintain higher air humidity.

Nutrition solution:

1. Configuring nutrient solution should use salt that is easy to dissolve.

2. Mineral nutrition elements should be controlled within 4 .Control the amount of trace elements.

3. Timely determine the pH value of the nutrient solution to keep the plants need acid and alkali.

4. The types of various elements in the nutritional solution are different with different plants and different growth conditions.

5. Pocket coconut is called desk coconut.If it is equipped with a pure and elegant container, it looks more beautiful.Select the ceramic or glass container with porous or side holes on the bottom, and it should be suitable for the size of the plant.First spread the clean large grains or medium grains as a fixed substrate, about 2 to 3cm thick, and then put the plant in the Flower pot.Try to let the root system be unfolded around, and then fill the clean pottery, 3 to 5cm from the basin edge.Note that the roots must be cleaned during the growth period.Remove the old roots, open the roots, and place the center of the Flower pot.After transplantation, you should inject the preparation of diluted nutrients until 1/5 of the height of the container.

Frequently problem handling

Breeding method

1. Sowing method

After flowering from April to May, artificial pollination can be available, and the fruit will take half a year to mature.Make a seedbed with a wooden box, and the specifications are moderate.The matrix is mixed with 3 parts of corrupt leaves, 2 parts of mountain mud, 2 parts of humus soil, and 3 parts of sand soil.Before the broadcast, it was soaked in warm water from 35 to 40 C for 36 hours. After the seeds were fully absorbed and expanded, the soil was covered with 1.5cm. The water was sprayed with a fine pore waterwatpot. The wooden box was covered with transparent glass in a warm place.After sowing, keep the soil moist, the temperature of the seedbed is controlled between 22 and 25 C, and the seeds germinate after 30 to 40 days.When the seedlings grow 2 to 3 genuine leaves, they can bring the group to the pot.The potting soil is mainly loose, well -drained, and fertile humus soil. Pot potassium, nitrogen, and phosphorus as the base Fertilizer, including 60%, 15%of potassium, 25%of phosphorus.Mao and Fertilizer, etc., and sprinkle a small amount of fuzan and dried smoke chips to prevent insect pests.

2,Division method

There are many coconut seedlings in the coconut seedlings and should be divided in time.Mostly before the growth of plants in the late winter and early spring.Use grass charcoal and perlite mixed matrix, and use a plastic Flower pot with a caliber from 1, 5 cm to 20 cm.The soil -free potted pocket coconut coconut that is more than one year is combined with a basin in the spring and is planted in the Flower pots with the above mixed matrix. Each plant is 3 to 4 plants.

Prevention and treatment of pests and insect pests

1. Yellow leaf disease

Light is too strong: Pocket coconut is like half yin conditions. When light is too strong, the leaves will fade or yellow, losing the value of ornamental;

Solution: Maintain the coconut coconut in a place with sufficient astigmatism, which can provide sufficient light growth, and it will not cause the yellowing problem of the leaves brought by light.

Too little watering: The coconut coconut is moist and requires sufficient water.

Solution: Frequent watering and keeping the pot soil moist. When the air is dry in summer and autumn, it often sprays water at the plant to improve the air humidity of the environment.

Excessive Fertilizer: Pocket coconut requires low requirements for Fertilizers.

Solution: Pocket coconut grows 1-2 times a month for liquid Fertilizer per month.

Disease invasion: High -temperature seasonal coconut coconuts are easily infected by root rot. Disease infection will cause pocket coconut leaves to start yellow and wither, causing plant death in severe cases;

Solution: Pay attention to the ventilation and soil breathability of pocket coconut growth environment. Todin and Bacteria clear can be sprayed during the disease.

2. Black spot

High temperature, humidity, and poor ventilation are prone to dark spots, especially when growing in April to November. We must pay attention to prevention. Once the leaf tip is found, it is necessary to spray 50%of Tapin or 50%Bacteria 800 to 1000 times in time.The prevention and control of the liquid, while ensuring that the indoor is ventilated and breathable, and appropriately appropriately applied phosphorus and potassium Fertilizers, such as plant ash, and promoting the production of plants to grow better and strong.The soil should be drained well, not to be dried, not to be wet, and the pot soil should be kept moist during the growth period to facilitate plant growth and improve disease resistance.

3. Major pests: Sicatin insects

Dry air and poor ventilation can cause the harm of the grabulworm. It can spray the drugs such as phosphorus, music, and enemy cachines to prevent control.

The cause and treatment of yellow leaves

Long -term lack of water

The growth rate of pocket coconuts is extremely fast, so its growth process requires sufficient water to supply, otherwise the water is insufficient, and the pot soil is too dry to cause the leaves to yellow.

Solution

The growth of pocket coconuts needs to be accompanied by frequent watering to keep the pot soil moist, so as to ensure the healthy growth and development of the plant.

Too strong light

The coconut coconut is semi -humid and half -shade. Therefore, places with too strong light are not suitable for the growth of pocket coconuts. The strong irradiation of the sun will make the pocket coconut lighten or yellow, losing the original glorious and viewing value.

Solution

Put the pocket coconut in places with sufficient daily scattered light for maintenance. This is not only conducive to the growth of plants.

The air is dry

Humidity is also an important element of pocket coconut growth. Low humidity can cause leaves to wither.

Solution

To maintain a suitable air humidity, the air humidity must be high. Sprinkle water around the potted plants to prevent the humidity from decreased and ensure the normal growth and development of the plant.

Insufficient light

Pocket coconuts often grow in cold environments. Therefore, placing it in a stronger place will make the leaves yellow and cause death.

Solution

Daily maintenance needs to place pocket coconuts in a place where the growth light is not strong, so that it will meet the growth needs of pocket coconuts.

Improper fertilization

The growth and development of pocket coconuts need to meet all the nutrients they need, so they need to fertilize it in time, but fertilization should not be too frequent.

Solution

The time for fertilization can be stretched relative, and the degree of fertilization should be appropriate.

diseases and insect pests

High temperature in summer can cause pocket coconut infection with diseases and insect pests, which will cause the leaf yellowing phenomenon, which will cause the plant to wither and die.

Solution

During the growth of pocket coconuts, we should pay attention to maintaining the ventilation of the environment and the breathability of the soil. If the disease is found and the outbreak, it can be sprayed with Bacteria Clear and Tabin for prevention and treatment.

precautions

1. Pocket coconut sex is a shaded environment. Therefore, it should be placed in the north window, near the east windows or other bright scattered Lights in the indoor training.The leaves are scorched and the leaves are yellow.On the contrary, if it is placed in the dark part for a long time, the leaf color will fade and lose the luster.

2. The most suitable temperature for pocket coconuts is 20-30 C, and the indoor temperature in winter is between 12 and 14 C, and the minimum temperature cannot be lower than 10 C.

3. To keep the surrounding air humidity, the coconut coconut is often sprayed with water to increase the air humidity.

4. Pot soil of pocket coconuts cannot be used for acidic soil, and a small amount of clay should be added.

5. Pocket coconut breeding needs to be changed once every 3 years.

6. Pocket coconut seedlings can be applied 3 to 4 thin liquid Fertilizers in the spring.

  1. 1
  2. ...
  3. 25
  4. 26
  5. 27
  6. 28