one, Songbai bonsai production tutorial

1 , Choose the material on the basin

Nature is a very generous and kind mother, so we can see all kinds of pine and cypress in it, but everyone knows that not all pine and cypress can be used to make bonsai, so when making pine cypress bonsai, we will do it.There is a job of selecting materials.This work requires some experience and common sense. Generally, the pine and cypress of the pine and cypress of the ancient and elegant pine are very good.After choosing a pine cypress, you can prepare the pelvis. The shape of the pot is usually determined according to the plant tree shape. It can be a straight, double -dry or oblique dry type, etc.The shape is also possible.

2 , Pruning

After the pine trees are on the basin, it does not mean that the pine and cypress bonsai is ready. A bonsai is very important, so there is another very important thing during this period. This is to trim a tidy posture.In fact, we generally have basic shapes in the original pine trees that were selected at the beginning, so in the process of trimming, we basically do some modifications based on this basic shape. For exampleThere are also parallel branches, etc., and then hang the branches appropriately, so as to enhance the old state of the pine cypress tree trunk, so that the pine cypress tree looks more vicissitudes and wild fun, and the value of ornamental value is naturally high.

3 , Tree species and techniques of cypress bonsai

(1 ) For young trees breeding, such as sowing, cuttings, pressing, etc., can be determined according to the shape and branch of the tree.If the cypress trunk is too straight, it is appropriately tilted when planting to increase the trend of the tree.Depending on the needs of the shape, short or curved, cut off the branches that are not needed, and then tie it with metal silk, and gradually improve the shape.

(2 ) For the cypress trees of the cypress species, according to the different thickness of the branches, the metal wires with different thicknesses are wrapped around it, and they are wrapped around, twisting, and bending.Some people call the "twisting Bone -to -Bone" no matter what shape the cypress bonsai, there must be a few highlights (generally 1 ~ 3 ), And then the shape of other parts should be carried out around a few highlights, just like a big play, there are protagonists and supporting actors, so that the main and secondary of the work can be clear and more ornamental.

(3 ) Sari Gan is the main characteristic of the bonsai shape of cypress trees. It has high difficulty. It is required that the producers have rich knowledge of bonsai and familiar with different types.In order to use the carving and brushing skills of Shengli, the sculpture of God branches.

(4 ) Pay attention to the timing when making relics, so as to 3 ~ 5 Month is suitable, because the liquid flow is active at this time, and the incision is easy to heal. When making a god branch, you should choose more forks, so you can do so beautifully.

Second, the maintenance method of pine and cypress bonsai

1 , maintenance environment

Want to make the pine and cypress bonsai four seasons green,, It takes a lot of thought.Such plants have certain requirements for the growth environment. Everyone needs to place it in places where the sun is sufficient, air circulation and moist.When you place it, you should pay attention to raising the bottom of the basin to facilitate breathable drainage.At high temperature in summer, it must be placed in the shade and windy air, and the sun is exposed.In areas above -5 C, it can be placed outdoors outdoors. It is best to bury the pot into the soil at the back of the yang back to make the branches expose the soil.If it is placed indoors, the temperature must not be higher than 10 C, otherwise it will affect dormant.

2 How to water

Some people lack corresponding knowledge,, It is difficult for them to master the watering of watering ,, Don't pour too much ,, Just pour too little.In order to make the pine and cypress bonsai better, everyone should often observe the dry and wet soil and choose the amount of watering according to the actual situation.At the same time, the amount of watering depends on the different species of tree species, changes in season, and cold weather.Generally speaking, in summer or drought, it is best to pour water once in the morning and evening. Water is poured once a day or every other day in spring and autumn. spring stumps are sprouting. You can also pour water once in the morning and evening.During the rainy season or during rainy days, water does not need to be watered, but also pay attention to drainage.Sandy soil can be watered more, and the viscous soil should be watered less.

3 Fertilization management

If pine cypress looks good, it is not enough to water it just, and everyone should also fertilize it regularly.Of course, you should not apply too much fertilization, which will affect the growth of plants.Everyone should grasp the fertilization content and types when fertilizing, and grasp the fertilization season.Generally speaking, the three elements of plant growth nutrients are nitrogen, phosphorus, and potassium Fertilizers. nitrogen fertilizer can promote the growth of the branches and leaves of the stumps; phosphorus Fertilizer can promote the formation of flowers and fruits; Potassium fertilizer can promote the growth of stems and roots.And it is determined with its growth trend.If you want the stump branches to leave lush leaves, you can apply more nitrogen Fertilizers; if you want to have more flowers in the stump, you can increase the phosphate Fertilizer content; if you want to dry the roots, you can apply more Potassium fertilizer.

4 , Pruning and plastic surgery

When the bonsai was just bought, it was very beautiful. After a period of growth, the original shape would change, which would reduce its ornamental. Therefore, everyone needs to trim plastic surgery, short -cutting, and secret techniques, so as to cut it, so as to cut it, so as to cut it, so as to cut it, so as to cut it, so as to cut it.Keep a beautiful tree position and appropriate proportion.In order to enhance the old state of the trunk and make it more vicissitudes, it can be properly modified to make the trunk to make up for the lack of the lack of the stump.

5 , Regularly turn the basin

In order to make the pine and cypress bonsai be better, everyone has to turn over the basin regularly, but it should not be frequent. turnPot, the number of times and frequencies of the pots should be grasped. Generally speaking, the pot is overturned for a year4 arrive 5 The secondary time is two to three months.Late autumn is also acceptable, but it is not conducive to rooting.When turning the basin, you can remove the soil on the root system, but be careful not to scatter the mud ball at the root, then organize the root system, remove the rotten roots, cut the roots that are too long, and plant according to the technical requirements of the upper basin.

6. Prevention and treatment of diseases and insect pests

Plants have a problem with pests. In order to better maintain the beauty of the bonsai, the diseased and insect prevention work of plants must also be done well.There are not many pests and insect pests in pine cypress,Mainly rust and red star diseases, while insect pests have red spiders that endanger leaves; dry pests, double Sugnicus, should pay attention to prevention and treatment, and can prevent the disease by spraying some Bordeaux liquid.

What are the classification of landscape landscape landscape?

Landscape lampdefinition

Landscape lights are also called decorative lighting, which are both ornamental and lighting.

Landscape lampBrief introduction

Pay attention to the design of trails and courtyard lamps.

The trail and the courtyard Lights are actually a combination of two types of lamps. The garden Lights focus on the landscape, and the trail light focuses on functionality. The two can have separated their own systems separately, but after consideration, the two are combined together and attributed to the conclusionFor trail garden light series.

Landscape lampClassification

There are many classifications of landscape lamps. It can be divided into street lights, ground foot Lights, trails and courtyard Lights, high rod lamps, low -level (lawn) lamps, projection lamps (pan -light, small projection Lights), street light pole decorative Landscape lights, Lights, Lights, lightsSmall lamps, lower Lights, buried Lights, wall lamps, underwater Lights, embedded Lights, fiber optic lighting systems, Solar lamps, etc.

Trail garden lampdesign

In the design of the trail garden light, pay attention to the following problems:

1 , Most of the Lantern Lights of the Trails exist in the form of man -shot lightDifferent from the light -shot light and direct light, it will not produce too much shadow, making the color brighter and darker.However, an important problem that the lamp in the form of light -shot light needs to be solved is that the surface temperature of the luminous body is too high.Judging from the popular trail garden Lights on the market, few products can solve such problems.

2 Calculation of elevation angle and shoulder distance.Calculation of elevation angle and shoulder distanceIt can achieve a good balance between functional and landscape effects. For example, if the design of the elevation angle is considered, it can better reflect the role of the landscape and meet the needs of people in terms of function.

1. Small rockery bonsai production Daquan

1. bonsai selection

In the production of small rockery bonsai, you must first choose the basin. The bonsai is very particular about the combination of the pots and the shelf. The pots are generally purple sand pots, disks, marble disks, stalactites "cloud plates", water grinding stone plates, etc.Most of the shallow plates commonly used in bonsai are rectangular or waist circular. There are four bottoms below. The edges are protruding and multi -edge along the plates to enhance the decoration, white or light blue, and can display the water surface.As for the furnishing pots, the material can be taken on the spot, creating several local characteristics.

2. bonsai design

Before the production of small rockery bonsai, it is necessary to determine which bonsai shape must be determined. According to the concept, the shape of the mountain is initially placed in the sand table.Note: The height and size of the rockery must be coordinated with the size of the shallow pot.

3. bonsai production

(1) Plastic piercing mountain body: first adjust the cement glue, pay attention to the consistency of the glue, and use it with the adjustment.

(2) Stone processing: Mountains that need to be adapted with hammer, chisel, sawing and other tools to process texture and strange shapes.

(3) Adhesive mountains: Painted with cement glue on both sides that need to be bonded to make the mountain stones consolidate into one, try to make the mountain stones not see the traces of the break.The pulp is cleaned.

4. bonsai maintenance

After the production of small rockery bonsai, learn to maintain. The flowers and plants configured in the rockery bonsai are small and delicate. Because the soil has a small water storage, it cannot withstand the exposure of the strong sunlight. It can only see the appropriate sunlight.Therefore, it is necessary to strengthen the shade, especially in the summer, which must be maintained under the shade shed, otherwise, the moss of the flowers and trees will be dry, atrophy, and soil surface.

At the same time, exposure will also make the ornaments on the bonsai lose color, peeling, and break, making the entire bonsai lose the value of ornamental.The Outdoor management of the rockery bonsai should be screened for rains, and it should not be too fierce during watering. Otherwise, it will rush to the pot mud and affect the growth of the plant.

When giving water, it is best to use water spraying or watering methods. This is not only conducive to the growth of plants, flowers and plants, and moss, but also wash off the dust on the surface of the rocks to keep the entire mountain stone fresh and green and vibrant.

Tips: Water can be stored in small rockery bonsai, or it is decorated with pavilions, boat bridges, characters, and other non -structural parts. It is also equipped with trees or small plants. After art processing, Make the beauty of the mountains and rivers are concentrated, reproduced in the pot.

Second, small cement rockery production process

1. Positioning sample: Position samples according to drawings, models and on -site conditions.

2. Buried parts: The cast-in-law uses 70 100 6 embedded parts, with a spacing of 1.5-2.5m buried; the framework of the frame is 70 100 6 embedded parts, and the spacing is 2m buried.Before burial, the rust, oil stains, and paint on the surface of the concrete should be cleaned up. The burial parts should be reinforced firmly before covering, and the specifications, quantity, location and location and location of the embedded parts should be connected to the concrete steel bars.Buried depth should meet the requirements of the design drawing.

3. Something production: The main material is 50 50 5 angle steel. The secondary point is used at 30 30 3 angle steel to apply rust paint for rust treatment.The premium of the plastic stone Square skeleton, the spacing size of the skeleton corner steel is generally controlled: the horizontal spacing is 1.3m, and the vertical spacing is 1.3m.The connection is welded; and then the left and right stackers are performed according to the model to make the rigid shape of the rockery.

4. Steel mesh: The wire mesh used in cement rockery is generally the most suitable mesh and wire diameter of 6mm.After the production of the skeleton is completed, the steel wire mesh is made with 6 round steel. The steel wire mesh is controlled at about 18 18-25 625px. The natural shape of the initial convex and concave is shaped according to the model.

5. Tie wire binding: After the wire mesh is covered with the rockery, the wire with a specification of 3 1/4 (4 meters) is tied to the rockery skeleton firmly.

6. Plasma: Hanging cement mortar to form stone veins and wrinkles. The fibericity can be added to the cement mortar to increase the power of the surface and reduce the crack.The wire is bundled and is completed, and the grassroots plastering is used with concrete mortar, with a thickness of about 1-37.5px; after the first completion, the second placement is performed with a thickness of about 37.5px.After the two layers of plastering of the rockery are completed, the wipes of the mortar inside the rockery in a timely manner are about 25px.The detailed operation steps are as follows:

(1) 1: 1.5 Composite cement mortar is scraped and covered with the steel wire mesh. The thickness is about 1cm. After full, it needs to be maintained for 2 days.

(2) 1: 2 ordinary cement mortar supplementary sewing.

(3) 1: 1.5 ordinary cement mortar plastic fake mountain texture. The artwork uses a variety of craftsmanship and other techniques to make fake mountain texture, which is about 2cm thick.maintenance after completion for 3 days.

(4) 1: 3 ordinary cement mortar repair texture and cracks.

7. Style: According to the model and the material of the mountain stone, the shape of the plastic stone rockery is shaped to shape the stone veins and stripes.The texture, color, texture and surface characteristics of the stone are carved on the surface of the plastic stone.According to the design requirements, the texture and color are mortar with stone powder and color powder with white cement or ordinary Flour according to the appropriate proportion, and treat plastic facial methods such as rough, Smooth, and hair.The shaping of texture, generally speaking, straight lines and stones supplemented by horizontal patterns are more able to express a steep and upright posture; mountain stones that are mainly horizontal and unsuited by straight lines are more expressive and bold.Comprehensive patterns of mountains and stones are more deep and magnificent.In order to enhance the natural and authenticity of mountain stones, in addition to the texture of texture, the natural characteristics of mountains and stones must be made, such as seams, holes, holes, rot, cracks, faults, displacement, etc.Generally speaking, the texture of the texture should be used to summarize the simplified refining; the processing of natural characteristics should be carefully carved with the "gongbi" method.

8. Coloring: According to the position of the plastic mountain stones, choose the appropriate iron oxide pigment for modulation and coloring.When the plastic stone water is not dry, the basic color calls the pigment powder and cement with water and mix well, and sprinkle the stain layer by layer.The coloring steps are as follows:

(1) The closed back color is blocked.

(2) Once color (3 layers).

(3) Two -color replenishment (dark color).

(4) Spray surface oil sealing color.Slightly darker tones are sprinkled slightly in the stone seam holes or the corners. When the plastic stone is 90 % dry, a little green, black or white and other sparse spots are sprinkled on the depression to enhance the three -dimensional and natural sense.

9, noodle oil: noodle oil can maintain the luster of stones to avoid the oxidation and weathering of stone Skin.Common use of maintenance oils include Vaselin, oil wax, light wax, etc., dipped in wax with gauze, and lightly wipe it lightly.

10. Rocket maintenance: Start maintenance after the cement is first condensed. It should be covered with hemp pockets, grass curtains and other materials to avoid direct sunlight and sprinkle water every 2-3 hours.Pay attention to lightly when sprinkled water, and cannot shoot.The maintenance period is not less than half a month. When the temperature is lower than 5 C, sprinkle water should be stopped. Anti -frozen measures, such as covering straw, grass curtains, grass Bags, etc.

Principles of fruit trees pruning

When trimming the fruit tree, the fruit farmers should not be blindly carried out. They should follow the three principles of "trimming the trees, the shape of the branches, the combination of the length, the combination of length, and the combination of light and weight."Among them, "because the tree is trimmed and the branches are made" refers"Combination in length" means that when the fruit trees are trimmed, the factors such as plants and fruits should be considered. The trimming should be discussed from the long process.Mainly, the result of the trimming of the tree is mainly based on growth and results; "mainly light and weight combination" means that when pruning, especially when the young trees are trimmed, the amount of pruning should be reduced to avoid too much trimming too much pruning too much pruning.The phenomenon of plant growth and suppression occurred.

fruit tree trimming technology

Although the trimming of fruit trees is divided into dormant trimming and growth pruning, the purpose of the two pruning is very different (the pruning period is mentioned by the specific purpose of the two), so there is a large difference in the trimming technology.The specifics are as follows:

Trimming during dormancy: short -cutting, recovery, long release, sparse branches, etc.

Trimming during the growth period: buds, carving buds, removing cute, topping, clinging to branches, twisting, pulling branches, removing, and other branches.

Short interception (short shear)

1. What is short -cut

It is a part of the year of the year.

2. Short -cut effect

(1) Promote the growth of branches and expand the crown

The germination and growth of the buds under the short -cutting of the mouth is conducive to expanding the canopy.It is mostly used for the pruning of the central dry and extended branches, the main branches extend the branch, and the side branches extend the branches.

(2) increase the amount of long branches

The short -term sprout rate and branches are significantly increased, which is conducive to increasing the amount of long branches. It can be used for the cultivation of large and medium -sized branches and the adjustment of the branches, and the restoration of the tree.

(3) Short cutting can shorten the axis, shorten the distance of nutrient transportation, and help promote growth and update.

(4) It can enhance the top advantage.

Cut

1. What is shrinking shear

Cut to a part of many years.When the thicker cuts are cut, first cut or short, and then retract when the branches are weak. Such a trimming method composed of two cutting treatment is called shrinkage.

2. The function of shrinkage

The role of resurrecting and changing the growth direction of the branches is conducive to ventilation and light transmission and weakening the mother branches.

The promotion effect of shrinkage -is often used in the renewal of the resulting branches and the weak branches.

The weakening effect of scissors -commonly used for power regulation, control or weakening the auxiliary support branches between backbones.

For example: weak branches shrink cutting

The weakened branches are mostly a single branch extended branch.When shrinking, shrink to the back of the strong branches or can be raised by raising angle.

3. How to apply

The renovation of many years of auxiliary branches is the result branch group. As a result, the branches are renewed and updated, the length of control of the backbone branch, and the size of the crown.

Scrutiny

ScrutinyMeaningTheRemove the branches from the base.

Sparse cutting

1. Reduce branches and improve the light in the crown, which is conducive to promoting results.It is often used to remove competitive branches, upright branches, overlapping branches, cross -branch, etc.

2. Weaken the growth trend of mother branches.It is often used to regulate the balance between the backbone, stronger and more sparse, weak or less sparse.However, if flower buds, result branches, or invalid branches are removed, it will enhance the power of the overall and mother branches.

3. The wound formed on the mother branches can affect the transportation of water and nutritional substances. It can use sparse shear to control the upper branches and the growth of the lower branches to enhance the growth of the lower branches.

Scrutinyofapplication

Shutdles are densely sprouting, strong branches, and dense branches.For Wangshu and Wangzhi, you want it to ease growth and balance the branches.Remove the dead branches, diseases and insect branches, long branches, drooping branches and aging branches.

Long -term

1. What is long -sized

That is, the branches of raw branches will not be trimmed in the year, and the top buds are retained to allow the top buds to make branches.More use for young trees.

2. The role of long release

Proper long release is conducive to alleviating trees and promoting the formation of flower bud differentiation.

3. How to apply

Two upright branches, competition branches, and long branches cannot be released.

The golden mean branches, horizontal branches, and oblique branches can be long.

Tune

(Artificial changes in the growth direction of the branches)

1. What is Qu Zhizhi

Bend or change the annual or perennial branches, change its growth direction, and make full use of the space to promote the results of the tree.

2. The role of song branches

It can change the top advantage, ease the branches, increase the bud, reduce the power of the branches, increase the short to the number, which is conducive to the flowers. At the same time, it can also make full use of the space to make the branches evenly distributed and good light.

3. How to apply

The annual development of branches or perennial auxiliary branches, and branches can be tacitated to promote flowers.

Carving and multi -trail carvings

1. What is engraving and multi -ring carving

The horizontal cutting cortex is used to the wooden part above or below the bud branch, which is called engraving.

The multi -tract carrier is cutting a week on the branches with a knife or cutting ring for a week, and it can significantly increase the germination rate.

2. The role of engraving and multi -tract carvings

Before and after spring germination, carved injuries above the branches can prevent the top of the top nutrients from being transported downward, which can promote buds, branches and growth under the incision.

Wipe buds and sparse shoots

1. What are the scratching and sparse tips

Scratching buds: erase or cut it after germination.

Sparse shoots: For the densely growing annual branches, cut off a few from the base, that is, the dense new shoots are removed.

2. The role of buds

Select the best to go inferior, in addition to dense and leisure, save nutrients, improve light and improve the quality of retaining branches.

Tool and cutting

1. What is topping and cutting tips

Tool: remove the tip of young tenderness.

Cut the tip: also cut off the young shoot

2. The role of topping and cutting tips

(1) Promote the germination of side buds and secondary growth, and increase the amount of branches.

(2) Promoting the formation of flower buds is conducive to early results.

(3) Improve the fruiting rate.If the grape flowering period is top, it can significantly increase the seat fruit rate.

(4) Promote the enrichment of the buds.The new shooting of the new shoots that will stop growing in autumn can promote the buds to be conducive to overwintering.

Twist

1. What is a twist?

When the new shoot is not yet woody, the new shoots on the back, the competitive branches of extended branches at all Levels, and the temporary branches growing in the back, at about 5 cm at the base, gently reverse 180 degrees, so that the wooden and the skinny parts are affected by both the wood and the cigarette parts. Mild damage, but not broken.

2. The role of twisting

Promote the formation of flower buds.

Take the branch ()

1. What is the branch

In the long term of the new shoots, it is bent from the base to the top with the hand, hurting the wooden part, and the sound is not touched.

2. The role of the branches

You can open the angle of the branches, improve the bud rate of the branches, promote the formation of flower buds and medium short branches, and cultivate the results of the result branches.

3,Rotatingapplication

The main objects are more upright branches, competitive branches, auxiliary nursing branches, etc.

Ring peeling

1. What is ring peeling

It is peeling off the branches.

2. The role of ring peeling

The leather part is the main channel for organic substances along the entire plant.Circular stripping is used to temporarily interrupt the upper and lower transportation of organic substances to achieve the role of inhibiting nutrient growth, promoting flower bud differentiation, and improving the fruit rate.

3,Circular peelingprecautions

(1) Circle peeling time

Related to the purpose.Promoting flower bud differentiation should be carried out before flower bud differentiation, and the increase in the fruiting rate should be carried out before and after the flowering period.

(2) The appropriate depth of ring peeling

Cut until the wooden department.Too deep and easy to hurt the wooden parts will severely suppress growth.Seriously causes the ring to divest.It is no effect if it is shallow.

(3) Pay attention to protecting the wounds of the ring peel and prevent the harm of diseases and insect pests.

4. Circle peeling object

Wangshu and prosperous branches are carried out, and the weak trees and branches are not carried out.

Summary of fruit tree Revision

Talking about the fruit trees is very old, there are skills to master the laws.

First of all, use high -tech, keep the trimming time in mind.

In the spring, scratching the buds in summer, and the winter cut in the hat in autumn.

Cut the fruit trees in the four seasons, and it is expected to yield every year.

fruit trees should be trimmed five to see, and the plan is determined after watching.

At first glance, the trees should be appropriate.

Second, look at the variety of fruit trees, and the pruning method should be clear.

Three look at the age of the tree and small, and the trimming should be divided into young and old.

Fourth, look at the trees and weakness, and the weak trees are cut and ease.

Five views of flowers and less flowers, there are skills under the scissors.

The diseased and insects were cut first, and the main branch was the first.

Be careful when you stay, do not move casually.

Qiu went to Da Zhi the most secure and wound healing the safest.

If the main branch is left, there must be conditions, and you must look at it from the direction.

The main branches at all Levels are determined, and they are looking for large and small branches.

The inner hall is to be removed upright, and there is no light without light.

You can say the growth position, the scissors follow your head.

Don't bend the center of the center, always grow in the middle.

The main branches at all Levels are extinguished, and the side branches grow on both sides.

If you want to get a large and high yield, the identification of flower buds is Guan Jian.

The flower bud head is large, and the small pointed head is the leaf bud.

The flower buds are not obese, and the flower bud leaf buds are not like.

As a result, there were three types of branches, long and short and short branches.

Too dense places should be removed, don't cut short branches.

After cutting, take a closer look.

In this way, the trimming is relatively complete, and the low production capacity will change the high yield.

The specific trim is like a housekeeper.

The fruit trees are like a big family, and their children and grandchildren are melting around their knees.

Family rules are strictly associated with fruits, and the rules are chaotic.

As a fruit tree mediation person, mediation disputes.

Zhongan is better than the old ancestor, and his body is very upright.

The waist was weak and deceived, and the head was crooked and the shoulders were obliquely replaced.

Zhong Gan was born with his son, and the boss had three feet away from the ground.

The child is a few generations than the ancestors, and the figure is thinner than the ancestors.

If it is as thick as the ancestor, it will be more sparse.

The son arranged in an orderly manner and rose around the ancestral spiral.

The small pagoda type is a small pagoda.

The distance between the layer is opened, and there is light in the inner hall.

Brother is in the lower brother, and the brother will always give up the brother.

If the brother is bigger than his brother, the consequences must be terrible.

Brother was weak, and his brother was prestigious.

This behavior is terrible and should be removed from the base.

If the space is large, he can also keep him.

Rebelling his grandson.Peel at the base.

The son gave birth to a grandson, and his grandson had to control him even more.

You can't just ride the door or stand on the back of his dad.

Can't run side by side with dad, you can't stay at home.

Before and after, he lives in an orderly manner, and the brothers are orderly.

Living at the top of the top is high, and the body is Slim.

Once you get fat with your dad, you will also be driven away.

As a fruit tree pruning, the long and young are clearly ranked.

Mo regards his son as a grandson, and his brother and brother must divide it.

The grandparents were rowed well, and the trees were graceful with fruits.

If your grandchildren come to chaos, your fruit tree is finished.

The quality of the fruit is not good, so that you can wipe your tears after autumn.

I do nt know what to say, right?

[Villa courtyard design] Villa courtyard design effect map appreciate villa courtyard design cases

Under the shelter of the big tree, the courtyard of this villa is extremely quiet, the green grass, the fresh natural floral fragrance overflows the entire courtyard.The soft cushion and the rainbow pillow, the joyful colors set the owner's amateur life leisurely and romantic.Inviting friends to gather here on a leisure weekend will definitely allow everyone to spend a happy holiday.

The advantage of the sea view villa is that it meets the desire of many people facing the sea, and through its beautiful scenery, it gives a nervous life.Therefore, of course, its courtyard has become the most comfortable life and entertainment space. It blows a soft sea breeze and feels the comfortable life brought by the soft beach.

The simplicity of the rural villas makes people forget the years, there is the most traditional and natural life atmosphere, and feel this original natural life.There are no flourishes in the prosperous metropolis, and more are quiet and quiet rural stories.

The rattan sofa chair and the white soft cushion are designed to design this small balcony into a quiet leisure area.It has sufficient light, the most natural soil, breathing fresh air, and feeling the simplicity of this simplicity with nature, which is so comfortable and comfortable.