1. Dry

There is only one main trunk in the bonsai trees, and the backbone attitude is basically upright or slightly bent, that is, those with the so -called straight apartment are called straight drying.The best performance of the straight bonsai trees requires the best performance of the roots must be a thick roots that are stretched around in all directions, making the trees look solemn and stable, and there is a momentum of the sky.The branches are stretched around, with rich Levels and powerful branches.The branches should be at about 1/3 or 2/3 of the trunk, and branches should not be produced. Do not have too many branches and leaves to avoid blocking the main trunk.Let the main trunk be exposed to show the standing and vigorousness of the pot trees.The Flower pots should be shallow, and the planting location depends on the shape of the tree. Note that there should be an asymmetric balance between the trees.If the crown is a waist triangle, the planting location is livable after the livability; the crown is slightly not waiting for the border triangle, and the planting location should be slightly biased on the short side of the triangle.

The bonsai of straight -drying trees should be made into high -shaped "straight" pictures, and the branches should be short.The tree species that are suitable for showing straight works include black pine, five -pin pine, money pine, Mizuki, ginkgo, elm tree and so on.Most of these materials are taken from forest farm, and some are dug from mountains.

Gardening Knowledge Lecture Hall & GT; & GT;

Two.

The dried bonsai trees require a certain degree of bending changes, but there should be no more songs, and one or two bending is enough.Avoid repeating too much monotonous, otherwise there will be traces of artificial work.Qu Gui is living, and the changes in the main lines are rigid, rigid and soft, and the lines are both Smooth and straightforward.

The changes of the sang materials of Shan Cai are unpredictable, vigorous and natural, and are very valuable, but there are also unsatisfactory line changes. Pay attention to the choice.

The artificially cultivated dry material must be slightly oblique during planting, so that the roots of the other side can be cultivated into a thick strong root and semi -exposed to the soil surface.The feeling of coordination.This is the main ornamental part of the Qugan trees bonsai, which must be attached very important.

For the main base of the backbone, you can shorten it by cutting, so that the main trunks can choose the development direction separately.In the future, you can also use the method of cutting and tie to cultivate the main trunk until the requirements of the bonsai beauty.

Cyllaria is the most typical curv -style bonsai material.Others such as pine trees and some miscellaneous trees are also suitable for composing dry bonsai.

3. Candid -drying

The trunk of the trees in nature is caused by factors such as wind blowing or mountain landslides, landslides and other factors.Therefore, the changes in the tilt of the trees are also very complicated, but one thing is that its main lines are not a straight line, but various deformations in the shape of "S".This attitude of tilting the trunk in nature is reflected in the bonsai of the trees, and we call it oblique dry type.The trunk of the oblique bonsai material must have various deformations of the "S" shape.If the main trunk is leaning, there should be thick roots on the left side, and the main stem tips turn upwards, which is like the oblique dry bonsai material that has been inclined for many years.If the trunk is tilted and the main lines are straight, there is a lack of charm and does not conform to the laws of nature.Because there are no strong winds in the world, and trees always continue to grow up.

The main point of making oblique dry trees bonsai is how to make the trees focus without losing their focus.The methods are: the role of the rough roots in the opposite direction, the role of branches in the opposite direction, and the tilt -tilt big branches, giving people a sense of support.

In order to strengthen the tilt of the pot trees and make the composition active, it is advisable to use a round shallow basin, a Square shallow basin or a semi -height round basin to make the tilt trunk or branches out of the pot.

Pine cypress trees and some miscellaneous trees are suitable for oblique dry bonsai materials.

4. Cliff style

On the cliffs of nature, some trees are often growing in various attitudes, and the thrilling and lush is still lush.The trees of this attitude are reflected in the bonsai.

Cliff types generally include semi -suspension, full suspension and upside down.

Half -suspension: The whole plant of the bonsai is out of the basin, and the sky is born, but the tree body is not lower than the pot surface.It may be the trunk crossing, or it may be thicker and thicker because the trunk is short, so as to get the momentum.

Full suspension: The whole plant of the bonsai is out of the basin, and it stretches down and the branches are across.

Inside the inverted type: The whole plant of the bonsai is out of the basin, the exposed trunk is Hanging vertically, and the branches are still horizontal.

The production of cliff -type bonsai focuses on the selection of materials, and requires a certain curvature change at the base of the material of the material, so that the trunk or big branches can cross or sag.Although the cliff -like bonsai is attractive, it must not be considered according to the conditions of the material.

Cliff -type bonsai was planted in the past to set up the momentum formed by the decline of trees from a height.Now use half -high Square pots or round pots to plant, and then use a few heights to cause cliff momentum when the exhibition is arranged.The advantage of it is that it can improve the cultivation and management of trees because the high -dry Tube is too deep; it can make scenery, pots, and shelves in view of viewing, and show vividly, so that the picture is transparent and coordinated.

5. Double dry

The double -dry trees bonsai appears in the form of two trees in the form, which reflects the artistic beauty of humility, echoing, denseness, and reality between the two trees.realm.

The production of double -dry bonsai must pay attention to the following points.

Two materials for selected materials must be divided into the main and secondary.The main tree is tall, and the second tree should be shorter.

The posture is mainly based on the main tree. The changes in the backbone of the second tree should be generally similar to or close to the posture of the main tree's main trunk to form a certain tacit understanding.If the gesture of the two trees has different changes in the posture, it is difficult to produce the beauty of coordination, and it should be avoided.

There must be two trees in planting.Whoever depends on the specific situation.When planting, the main base of the two trees should be approached, and the roots of the tree should be basically consistent, and they must not be their own.The angle of the stretching direction of the two trees should not be too large, generally ideal within 45 angle.If it is too large, the trunk of the two trees may lose their echoes and hope.

The branches and strips are relatively complicated by the two -dry branches and adjustments. The two trees should be treated as a unified overall treatment to achieve the overall balance, stability, reality and coordination, and orderly.

The large branches of the two trees should be stretched outward, and the coarse branches should be cut off between the double stems to avoid cross -branches and the main trunks.The branches between the double stems should be filled by the branches on the front and the rear side to avoid straight and straight, so as to be the most natural.

In addition, the branches of the main tree should be high.

Double -drying can also be two different tree species, but the best cooperation is still a tree species.

The double -drying type is the co -planting of two trees. It can also be merged into a double -dry form, collectively referred to as double -dry type.Because from the perspective of styling, their trunk processing is the same as branches.A double -drying may be the original, and it is divided into two due to external forces.The height, thickness, straightness, and hiding changes of the two main trunks meet the performance requirements of bonsai art.Sari is also a heavenly success, and it is slightly decorated with rot.God branches are indispensable, but artificially.The two water lines are wide and the outside of the dry, which is the most ideal.The crown is closely combined by two crowns, and its power is unified.The whole tree is suitable for static, compact structure, and the beauty of stability, quietness, unity, and harmony.

1. Which of the Camping carts and buying a vegetable folding car is better

1. folding shopping carts, I feel that children and women like more.It is usually 75L or 50L. It feels like a tie box, but it is just Square. The color is bright. Some can also pull upstairs. You can also sit on the cover.Save space.

2. Camping cart, a small car that can be folded in a portable four -wheeled four -wheeled.It is about 100cm long and 50cm wide. You can also bring a slightly short table board. It is very convenient and generally handle.These small carts are full of universal wheels, and there are brakes and bearings, which are really various options.It is really convenient to see the car out of the Park. You can put a bunch of things in the car, full of piles, and a child and a bunch of things on the car. The most car. See three children sitting on it.It's too convenient.

Each has its own characteristics, and you can choose according to your needs.

2. What types of Camping carts

The previous article has briefly learned about which Camping cart and a folding car. If you are interested in Camping carts, let's go and see which types of Camping carts are!

Camping trains can be divided into two categories: folding on both sides and folding on all sides.

1. Fold on both sides:Expand the front and rear ends. The opening and closing is more convenient, but the volume is large and cannot stand after the folding. It needs to be stored in the gap.

2,folding four sides:Expand it to the surroundings, more complicated opening and closing, and you need to bundle it with other accessories after storing, and the volume is smaller after folding.

1. Can heaven umbrella sunscreen?

Under normal circumstances, ordinary heaven umbrellas can also be sunscreen, but its Sun protection effect is not very good.The role of heaven umbrellas is mainly to cover rain and snow, because umbrellas are mostly made of oil paper, oil cloth or plastic cloth, and its fabric can also cover part of the ultraviolet rays, which can be used for sunscreen in a weaker environment.

However, it is not recommended to use ordinary umbrellas to sunscreen if it is summer, because the Sun protection effect of ordinary umbrellas is not ideal, and the sunlight in summer is very strong, and the ultraviolet rays are also very strong. The umbrella cannot protect our Skin at all.Very inappropriate.

summer sunscreen is best to choose a professional paradise. The Solar umbrella is a kind of umbrella that is mainly used to cover the direct irradiation of Solar light. It has a layer of anti -ultraviolet coating on its surface, which can well cover ultraviolet rays and prevent ultraviolet rays from causing Skin to the Skin to the Skin.Harm.It is best to choose a sun umbrella, and the defense effect is the best.

Second, can heaven and umbrella as a sunscreen umbrella?

Paradise and rainy umbrellas have sunscreen effects and can be used as sunscreen umbrellas.There are many paradise umbrellas on the Internet that are folded, and it is convenient to use when going out.Both the rain or sunlight can be used.Yellow Umbrella is a physical sunscreen in sunscreen measures. The main function is sunscreen, anti -ultraviolet rays, and protecting Skin health.At present, the UPF value of the paradise umbrella in the market is generally between 30 and 40, and only the UPF of some products is 50.When the ultraviolet rays are relatively strong, select the heavenly umbrella with low light transmission and high UPF value, which can play a good sunscreen.Paradise Umbrella brand Products & GT; & GT;

1. Dimension measurement skills of radiator hook

Under normal circumstances, heating designers will calculate the height and width of the hedles based on the thermal demand, placement position, room orientation, decoration style and the heat dissipation of each piece of radiator.

1. If there are rooms with floor -to -ceiling windows and large bay windows, short heating slices should be installed under the window, which can effectively use space, facilitate the heat dissipation and heat circulation of the heating film, and complete the heating of the whole house.Judging from the response of good and comfortable heating users, most people now use the heating height of 1500mm and 1600mm such as the living room and bedroom, and in the bathroom, a dedicated bathroom airbuilding is used.

2. Although the radiator can be customized at will, the size of the Heating tablets can be freely selected according to the needs, how to choose the heating piece of professional heating engineers to avoid any design that affects the normal heat dissipation performance, so as not to be installed and used in the heating film.It brings danger to family property and personal safety.

2. How to install the radiator hook

1. Determine the linked drilling position in accordance with the actual position of the radiator.

2. Drill the hook position in the installation. If you install the M8 expansion bolt, use 10.5 drills to drill about 100mm deep. If it is a plastic expansion throller, use 8 drill bites and 85mm deep.

3. If you want to use the ground, you should first drill the hole with 6 drill bits on the floor, and then use a plastic expansion thrush to fix the ground to the floor, and then use the expansion thrush to fix the hook on the wall.

1. What facilities and equipment do hydroponic vegetables need

The cultivation and planting of hydroponic vegetables are usually carried out in the greenhouse.In order to ensure the normal and healthy growth of vegetables, light adjustment facilities, ventilation facilities, and temperature and humidity adjustment facilities must be provided in the greenhouse greenhouse.Anti -insects are also hung in summer to prevent insect pests.

The composition of hydroponic facilities and equipment is composed of nutritional solution grooves, seedling equipment, cultivation pools and cultivation plates, liquid adding systems, drainage systems, circular systems, etc.

1. Nutritional tank

Nutritional solution grooves are used to store nutrients. Generally, bricks and cement are made into water sinks.The specific width of the nutritional groove can be flexibly designed according to the greenhouse terrain.

2. seedling equipment

The seedling equipment is used to sow and seedlings, consisting of seedlings and breeding matrix.The seedlings are mostly made of plastic with flat bottoms without leakage. The plate is 60 cm, 30 cm wide, and 3 cm high.The breeding matrix can choose a sponge block or a degradable rock wool block with a large porosity.

3. Cultivation pool and cultivation board

The cultivation pool is the main site of vegetable growth and the main part of hydroponic facilities.vegetables are planted on the cultivation board and placed in the cultivation pool.The root of the vegetables obtains moisture, nutrients, and oxygen from the nutrient solution in the pool, thereby meeting the physiological needs of normal growth.

The cultivation pool is generally made of cement, and its shape and size are different depending on the types of different vegetables. The cultivation ponds for cultivation of leafy dishes are generally large, up to 100 meters long, up to tens of meters wide, and the specific size will be.Depending on the area of the greenhouse.The cultivation pool of fruit dishes is generally smaller, with a length of 3 meters and a width of 1.5 meters.Both cultivation pools are rectangular, and the pool depth requires 30 cm.In addition, the cultivation pond also has ditch types and pipeline types, but these two cultivation pools are mostly used for small -scale production and viewing purposes.

The cultivation board is also known as the implant plate. It is used to fix the root of vegetables to prevent dust invasion, cover the light of light, and prevent the algae from generating and maintaining the temperature of the nutrient solution in the pool.The cultivation board is generally made of polystyrazene board. According to the types of vegetables and the needs of different growth periods, their specifications and sizes are also different. Generally, they are 80 to 100 cm, 50 to 70 cm wide, and 3 cm thick.The planted pores with a diameter of 3 cm are divided into 288 pores, 99 -hole boards, 72 -hole boards, 24 -hole boards, 18 -hole boards, 6 -hole boards, etc. according to the hole distance.

4. Add liquid, drainage system and nutritional fluid circulation system

The governance of hydroponic facilities is generally pumped into the cultivation pool by the pump.The pool is kept 5 to 8 cm deep water Levels, and the facilities that cultivate the pond adding liquid are composed of iron or plastic -made liquid addresses and plastic -made liquid support.

The nutrient solution was pulled out of the pump from the nutritional groove, and the liquid coefficient and the liquid branch Tube entered the cultivation pond, which was absorbed by the root of the vegetables.The nutrient solution higher than the ductal is flowing back to the nutritional groove through the drainage groove to complete a cycle.

2. Homemade hydroponic vegetable planting equipment

Materials: PVC water pipe diameter 110 series, diameter 75 series, 50 series diameter, 110 rpm 75 supplement core, 75 ride 50 supplement core, 110 corners

Bend, 50 corner bend, PVC glue, a bucket or water tank above 30L, a submersible pump (over 2.5 meters), silicone Tube, throat hoop, throat,, throat,, throat,

Timing plug.

tools: saw, electric diamond, open -hole, tape measure, marking pen

Production process:

1. The place where the hydroponic pipeline is placed must be sufficient, and it is best to facing south.Observe the light situation and place hydroponic pipelines in places suitable for planting.There are many forms of hydroponic equipment, including newspaper shelves and box hydroponic devices. Although the structure is different, the principle is that the root system of plants extends into the water to absorb nutrient solution.The root of the plant in the system.Some special plants, such as: the roots of water spinach and green dill are not high in the oxygen content in the nutrient solution, and can also be cultivated by static water.But in general, the flowing nutrients are better, suitable for most vegetables and plants.

2. You can find a lot of hydroponic equipment on Taobao and choose the appropriate direct order.But if you want a set of hydroponic systems that are suitable for your own, you can only DIY.Measure the size and calculate the length of the PVC pipeline you need to purchase the material.It is recommended to use a PVC Tube with a diameter of 110mm. In addition to planting vegetables with leafy vegetables, it can also be used to plant eggplant vegetables such as Pepper, tomato, okra, and strawberries.Even in the 110 pipes, the developed fruits and fruits of Cucumber and loofah have succeeded.The pipelines with a diameter of 75mm are only suitable for planting leafy vegetables, such as lettuce, cabbage, spinach, coriander, etc.

3. When designing, pay attention to the 110 pipes and finally convert it into a 50 Tube with two times. The planting pipes are connected with a 50 -sized Tube.This is to retain a certain depth nutrient solution in the planting pipe, so that the root system of the plant is always soaked in the nutrient solution.If you use only one time to make the core from 110 to 75 sizes, it will only be less nutrients staying in the pipeline. When the root system of the plant is underdeveloped in the early stage, it may not be a liquid surface.The entire hydroponic pipeline should form a circular system.The submersible pump in the bucket pumps the nutrient solution to the water inlet, and the overflowing port will circulate a circle of nutrients and then flow back to the bucket.When designing, it is necessary to consider factors such as the direction of the water flow, the level of the level, the flow, and the low -level pipelines overflowing.4. Measted the size of the pipeline, and after the material is good, use an electric drill and add a hole to drill the pores of the planting basket on the pipe.The size of the opening device is determined according to the size of the planting basket.The previous spacing of each planting hole is 20cm, which can meet the growth requirements of most vegetables.You can adjust the hole distance to 10cm, so that a lot of space can be saved during the seedling period. After the vegetables grow up, the middle vegetable seedlings will be kept at a reasonable distance.5. Pipes and accessories that are meticulous with the size of the size are bonded with PVC glue. Pay attention to as much glue as much as possible to avoid leakage.After sticking to it, you can test the water 24 hours. Observe whether the water flow is normal, and whether there is water leakage and overflow.If the design is reasonable and the construction is carefully, there should not be too much problems in testing water.

6. After the water test is successful, you can add a timer to the power supply of the submersible pump.Because plants do not need too much oxygen at night, they can be set to work for the diving pump from 7 am to 7 days in the evening. After 7 o'clock in the evening, it can be circulated once a hour and a cycle for 10 minutes.