1. What are the benefits of electric scissors to pruning fruit trees

Electric branches and scissors are a kind of efficient, ecological, safe electric branches and scissors. They can cut fruit branches such as apple branches, grape branches, mulberry branches.Good helper for production.The advantages of electric scissors are mainly:

1. More efficiency

Electric scissors are powered by electricity. Its pruning efficiency is 2 to 3 times that of traditional hand -cutting efficiency, and electric scissors can also be trimmed in both directions. It is more suitable for trimming or shape than ordinary scissors.And in the past, it was unbearable to use manual scissors to trim fruit branches for a long time and arms, while electric scissors would not have this situation.

2. Good durability

The supporting structure of the electric scissors is simple, the operation is stable, the failure rate is low, the blade cutting capacity and life are high, and it can be used for a long time under normal use and regular adjustment.

3. High pruning quality

The performance of electric scissors is stable, and the quality can meet the requirements of Gardening. Under the correct operation, the flatness of the fluff surface is better than manual trimming, and there is basically no leakage.Compared with manual scissors, the fruit branches that are trimmed by electric scissors are closer to the natural growth state. The canned crown surface is larger. The trimmed surface is neat and beautiful, and the buds and leaves are sprouting and sprouting.

4. Good safety protection

Electric scissors have a good safety protection function. The blade follows the wrench. When the stuck is stuck, the circuit self -inspection process will start motor monitoring, and protect the motor without burning.The protection function of both sides of the motor (DC -free motor) is controlled by Hall chip switch.Rewarding the trigger position will open the cuttings and then close.The stress of the battery over loading is overheated and over -discharged and the discharge will be maintained by the protection of the circuit board.

2. What should be paid attention to when the use of electric pruning is trimming

With the development of technology, electric pruning has become an indispensable Tool for garden operations. Electric branches and scissors are not only more laborious when the method is wrong, but also may affect the service life of electric pruning.Pay attention to some matters:

1. When using electric pruning trimming and accessories, we must comply with the instructions and use methods of use. At the same time, the working environment and the work they want to complete should be considered. The use of electric pruning and trimming as a operation that does not meet the requirements may cause danger.

2. Electric pruning pruning requires professional training to use, so that the unfamiliar electric pruning trim or those who do not understand the use instructions are very dangerous to use without training.

3. Do not cut the branches of the working range of the scissors. Do not cut too hard things such as metal, stone and other non -plant materials. Do not clamp the Tool with tiger clamps. If scissors are worn or damaged, please replace the scissors.

4. Electric branches should be kept clean before and after use. After use, use clean cloth to clean electric branches, batteries and chargers, and use soft brushes or dry cloths to clean the dust on the scissors head. Do not use it. Do not use it.Any corrosive or solvents cleaner.

5. Use the equipment correctly according to the instructions of the use. Do not use electric branches, batteries, and chargers. Do not use electric branches, batteries, and chargers in any liquid.

6. Make sure that the switch is closed when adjusting, replacing attachments or storing electric branches, and avoids the risk of electric branches and cutting unexpectedly.

7. The idle electric pruning is trimmed in the blade closure and stored outside the child.

8. After use, the dirt should be removed first, and then the dirt should be removed first, and then the lubricating oil or oil is lubricated on the contact part, so that the blade is in a normal maintenance state. This can reduce the resistance and extend the life of the blade.

1. What is the structure of electric scissors

Electric scissors are used as the power of the motor, and the handheld electric Tool that drives the work head through the transmission mechanism to drive the cut operation. The specific part is composed of the following parts:

1. battery: Most of the electric scissors are lithium batteries. They have large capacity and light quality. They are usually equipped with 1.5m long power cords, chargers and backpacks. The power cord cannot be cut off.There is also a battery with electric scissors on the handle, which is usually small.

2. blade: There are two types of dynamic blades and fixed blade. The quality of the blade is directly related to the pruning effect and pruning efficiency. Pay attention to the material, workmanship, and service life of the blade.

3. Body head: Not all electric scissors have a knife head. Generally, 3 cm electric cutting has a knife head, and 4 cm electric scissors have no knife head.

4. Extend rod: It can be used to trim higher branches and leaves. The length of the lengthened rod is generally 1.3-1.9 meters.

5. Others: Including lubricating oil, rubber skid cover, etc. These tools can make electric scissors more convenient and smoother.

2. What is the working principle of electric scissors

Electric scissors take electricity as the source. When working, the controller switch starts and starts with a brushless motor. Drives the eccentric axis-connecting mechanism through the reduction box, so that the knife rod is driven by the head of the knife head.Do not move on the blade to complete the pruning of the branches.

3. How to use electric branches and scissors

Electric pruning trimming is used for cutting and trimming and trimming, and trimming, picking, etc. of fruit branches below 30mm. The use of simple and convenient use, good pruning quality, and the use of electric pruning trimming is:

1. Open the special Backpack and put the electric pruning and battery in the corresponding storage package.

2. Put the electric branches and pruning and connect the power supply through the Backpack and connect to the battery, and wear a Backpack (put the scissors power cord into the specified fixed buckle of the strap to prevent it from cutting to the wire)

3. Take out the electric branches and trimming, turn on the battery power switch, and will make a "drop" sound, which represents the normal power supply of the battery.

4. Continuously and quickly deduct the trigger 2 to 3 times, and the blade will be opened automatically.

5. Before work, pull the trigger to make the blade aircraft run several times. Listen to whether there is no sound or too fast and too slow, and start working after normal.

6. The opening size of the blade: Press the trigger, and when you hear the two "Didi" sounds, the trigger will be released immediately, and the size of the blade will automatically convert.

7. After the trim is trimmed, long press the trigger, hear the three sounds of "Didi", release the trigger, automatically close the blade, and then turn off the battery power switch to collect it.

Note: During the long -term use of the machine, the grip heat is normal; the blade of the scissors needs to be maintained regularly. When the branches are completed or needed to replace the blade, the blade is opened to add lubricating oil between the blade.