1. What is the reason why the off -wild open camp lamp is not on?

When using Camping lights in the wild, sometimes the Camping light is not on. There may be many reasons, such as:

1. The Camping light is out of power and needs to be charged.

2. Poor contact with field Camping lights, and line failures, you need to check whether there is a problem with the wiring.

3. The LED bulb of the Camping light is burned, and new bulbs are replaced.

4. Outdoor open camp Lights are damaged due to breaking or water. This failure maintenance is more troublesome, and it is usually necessary to contact the merchant to repairs.

Generally, the Camping lights are not on. The main reason is the above reasons. Find the problem, and then the corresponding maintenance.

2. What to do if the Camping light cannot be charged

The Camping light is not on. Generally, if it is not a failure, the main reason is that it is out of power. After all, the Camping is in the wild, and there is no power supply to the Camping light to power in time.Sometimes the user's external power supply is charged with the Camping light, but found that it is not charged. What is going on?

Generally speaking, if the field Camping light is not charged, it is either a battery fails or the Camping light line is faulty; if the charging Camping light can be charged batteries, if there is a failure or failure, replace the battery, just replace the battery, just replace the battery.; If there is a problem with the Camping light line that causes the failure to charge, you need to check the line.(Note: Circuit inspection and maintenance is more troublesome. It is recommended that friends who do not have electricity knowledge do not rashly repair it by themselves)

3. Is the Camping light easy to break?

Camping lights are used during Outdoor Camping. The Outdoor environment is relatively harsh. Ordinary lamps cannot meet the needs of the use. Camping lights are designed for Camping. The shell materials are light and solid.It is not easy to break.

However, pay attention to using Camping lights. Do not keep the Camping lights all the time. Do not let the Camping light soak in water to avoid often bump or fall when the Camping lights are often bumped or falling. This will make the Camping lights longer life.

1. Troubleshooting device fault characteristics

Failure 1: After installation, the headlights work normally, but the instrument Taiwan big light fault alarm Lights are on

This is a very common failure. It may be because the pyrine lamp and the stabilizer are not matched. You should choose the same voltage of the pyrine lamps and stabilizers.

Failure 2: After installation, the Light bulb has a flashing flashes or often off or the left and right Lights.

Most of these causes of failure are line problems, which may be caused by the stability device's start -up current.At this time, the working current of the headlight line needs to be checked normally.

When the stabilizer squeaks in the work, this is the sound of the transformer work inside the stabilizer. This situation is normal.However, the sound is too loud, and the cover can be heard outside, it means that there is still a quality problem in the transformer. Please rest assured that this will not affect the use. If it is serious, replace the stabilizer.

2. Method of determining whether the stabilizer is damaged

1. When the lamp is not bright, twist the Light bulb to replace the new Light bulb. If the new Light bulb is on, it is the problem of the bulb; if it is not bright, there is a problem with the stabilizer.

2. Check the interface of the stabilizer line beam. If the socket has a loose or a problem with the line, the stabilizer will fail; if the plug is normal, it is the problem of the stabilizer.

3. How to detect good or bad on the airlight lamp

1. Bullet test

(1) Different way

a. Whether the electrodes of the two ends of the light ball have a serious loss.

b. Whether the ceramic Tube has broken and broken.

c. Whether the visual wire wire is broken.

d. Whether the visual lamp Tube is broken and damaged.

e. Whether the lamp Tube column is broken and broken.

f. Whether the visual lamp is loosened or not.

g. Whether the base is loosened and falling off.

h. Whether the Light bulb power line has a loose and falling off.

i. Whether the light ball has cracks or rupture.

(2) Test method

a. Take a good Ballast as the benchmark for testing HID Lights.

b. Prepare a power supplyer and adjust its voltage to 13.20V as the test benchmark voltage.

c. Pick up all wiring first and turn on the power supply to test whether the Light bulb will light.

d. If the power is turned on and cannot light up the HID light, it means that HID is damaged.

2. Stability device test

(1) Different way

a. Whether the visual power line group is destroyed or damaged.

b. Whether there is a destruction or damage to the visual control line group.

c. Whether the high -voltage line group is destroyed or damaged.

d. Whether the high -pressure box line group is damaged or damaged and leaked.

e. Whether the body of the stabilizer is destroyed or damaged and leaked.

(2) Test method

a. Take a good HID light as the benchmark for testing Ballast.

b. Prepare a power supplyer and adjust its voltage to 13.20V as the test benchmark voltage.

c. Pick up all wiring first and turn on the power supply to test whether the Light bulb will light.

d. If the power is turned on and cannot light up the HID light, it means that Ballast is damaged.

e. If you turn on the power to light up the HID light, it means that Ballast can light up, but you need to check how much its power input current is to determine whether the function of the stabilizer is normal.

The determination benchmark is as follows:

Normal input current range between 3A-5A.

Greater than 5A indicates that the work efficiency of the stabilizer is reduced, resulting in increased consumption power and decreased reliability.

Smaller than 3A indicates that the work efficiency of the stabilizer and the decrease in reliability may cause the Lights to light up.

1. What is a Camping light

Camping lights, also known as camp lamps, Tent lamps, and wild Camping lights, are lighting equipment for Camping enthusiasts to provide night lighting functions. It is also one of the necessary camping equipment for overnight Camping. In the camp, it can provide us with a stable light source, Convenient for leisure and cooking in the camp.

Second, the Camping light is good or the battery is better

With more and more people Camping, the current Outdoor camps have developed various Camping lights. Camping lights can be divided into charging Camping lights and battery Camping lights according to different energy sources, so which type of Camping light is betterWoolen cloth?

1. The advantages and disadvantages of charging Camping lights

The advantages of charging Camping lights are energy saving and environmental protection, and do not have to worry about power problems. The current charging Camping lights can be charged, power charging, Solar board charging, etc., which can be charged anytime, anywhere, which is more convenient;The premise is fully charged, otherwise it is more troublesome for temporary charging.

2. The advantages and disadvantages of battery Camping lights

The advantages of battery -type Camping lights are mainly to replace the battery used at any time without worrying about the problem of battery life; however, it also has a disadvantage, that is, it is necessary to bring additional batteries to increase the burden on camping equipment.

Generally, when choosing Camping lights, you can choose the appropriate type according to your needs. If the Camping time is not long, the charging Camping light that is charged in advance is better; if it is a wild Camping or Camping time for a long time, you can consider it.Use a battery Camping light.

Third, can the charging model Camping light change the battery?

The Camping light originated from the military Lights on the battlefield in the past. With the development of the Camping economy, Camping lights are becoming more and more popular. Traditional Camping lights are generally battery types. It is only necessary to replace dry batteries. Now many open camp Lights are charged.So can the charging Camping light be changed?

Generally speaking, the charging model also has a battery in it, but the battery can be used, not an ordinary dry battery. If you want to replace the battery, you need to change the same type of battery. Ordinary dry batteries cannot be used unless there is any.The same type of dry battery.

1. Can the wild Camping lights be replaced with a Light bulb?

Camping lights play an important role when Camping in the wild. Many of the Camping lights now are LED electric Lights and use LED bulbs. If the light bulbs are not bright enough or bad, you need to replace the bulbs. Can the wild Camping light be replaced?

Generally speaking, the bulb of the Camping light can be replaced. If the bulb is not on, or it suddenly burns, you can remove the wild Camping light, remove the bad light bubble inside, and re -change the new one.However, when you go to Camping, you will not bring an additional Light bulb, so you usually replace it after returning home.

2. How to change the Light bulb in Camping lights

The Camping lights are generally LED bulbs. The replacement method is similar to the ordinary LED bulb replacement method. The specific method steps are as follows:

1. Before changing the bulb, we must first disconnect the switch of the wild Camping lamp to avoid the risk of electric shock. Then safely remove the Camping light, wipe the dust of the dew luminous light with a clean dried Pozi, and then put the lampshade on the outside.Take it down.

2. After taking off the lampshade, if you find that the bulb has been black, it means that the bulb has been broken. It is likely that the filament is burned. You need to buy a installation again and select the LED bulb with the same specifications.

3. Next, remove the original Light bulb. Generally, according to the structure inside, the deck of the fixed LED Light bulb is opened, and then the bulb is taken out. In fact, the installation of the Light bulb is generally equivalent to inlaid in it.As long as you find the source of the bubbles inlaid and pull it off, it is not difficult to operate.

4. Press the new Light bulb and pour it back to install again.That is, the newly bought Light bulb is fixed with a scavenger, and the other end is connected to the power supply. After installation, see where it is not installed, especially the side of the power supply.

5. After the installation is completed, install the lampshade, turn on the switch to try, and just light up.

1. What is the flashing light?

Blasting Lights, also known as the frequent flashing light, use electronic means (such as programming single -chip microcomputer IC, etc.) to make the light source flickering slowly or quickly to play a warning.The flashing light has been used on the police car before, rarely used in the people. This kind of policeburstThe flashing Lights belong to the controlled items.It is now widely used in entertainment venues, road traffic, advertising brightening, vehicle ships, public security police and other fields.Although the state has no mandatory requirements for the installation of flashing Lights, it cannot be used in the state or city.

2. What are the uses of flashing Lights?

1. Basic role

The role of flashing is to remind and warn. For example, if you have an emergency, you need to attract the attention of others. You can explode, so others will notice you.For a simple example, it is at night when you stop the car on a high -speed car. It is happening at night. You can explode the car after the flash warning. Of course, you cannot shoot the driver's cab.During the fire, he was trapped in the house and flickered to remind people outside to save himself.Flashing can also cause dizziness. There is a certain self -rescue function. There are not many opportunities for daily use. It is useful at critical moments.

2. Modified family

With some low -frequency flashing small power decorationburstFlash lamps appear in the car supplies market, and many lovers who love modification willburstThe flashing Lights are one of the essential weapons for the car -loving modification.

3. Daily necessities

There are many LED pocket -shaped flashlights on the market, which is very suitable for enthusiasts who like wild activities.The shell of metal alloys has the function of strong light, work light, and flashes. LED is energy saving, environmental protection, long life, and convenient to use, and the continuous lighting of this flashlight is very long.It reaches 8 hours, and the work light is 19 hours, and the brightness of the work is also very bright.