1. What are the types of Outdoor dew Tent lamps?

There are many camping equipment that need to be used during Outdoor Camping. The Tent lamp is one of them. When the Camping, the Tent lamp mainly provides a lighting function. In addition, it can also have a certain effect of creating an atmosphere. Therefore, it is also called the open camp atmosphere light.There are many types of Tent lamps, mainly in the following:

1. Steam lamp

After the steam lamp is installed with kerosene or paraffin oil, then cheer up in the oil pot in the base, so that it can cause a certain pressure, turn the kerosene into a vapor, and spray it on the hot gauze cover to emit white light.Generally, the lamp head of the steam lamp is a gauze made of ramie fibers or asbestos on the mouth of the lamp. There is also a hood like a straw hat brim in the upper part. The lightness of the lighting is both extensive and bright.

The disadvantage of the steam lamp is mainly the glass lamp cover is easily broken during transportation. At the same time, the flame will produce a lot of heat when burning, and it will be easy to burn if it is accidentally touched.

2, kerosene lamp

coal oil lamps are Camping lights used in the military camp in the past. It is also a relatively retro camping equipment. The brightness is low and about 30 lumens. Generally, the atmosphere effect is played. Every 300 ml of fuel can keep it on for about 20 hours.

If the kerosene lamp is used as a Tent lamp, the advantage is that there is a more atmosphere. The disadvantage is that the brightness is low and the cost is high.

3. LED light

Compared with the first two types of lamps, LED lights are commonly used Camping lights commonly used in modern Camping. Although LED lights are not the longest in battery life, it is much easier to get started than steam lamps and kerosene lamps.The appearance design can also be changed diverse, and it is more suitable for Hanging at an atmosphere light, which can be stored through charging and battery.

4. Candle lamp

Candle lamp is a less common Camping light. It has a burning period of about 50 hours. It can be used or suspended. The core cup can be replaced. It also feels a romantic feeling when it is used outdoors.

2. Which one is better for Outdoor Tent lamps

In the above Tent Lights, which Tent light is better, it is actually no conclusion. After all, different types of Outdoor Tent lamps have their own benefits:

The atmosphere of the oil lamp is good, but the use of additional oil is needed to be used. The storage is not convenient and the operation is relatively complicated.Steam lamp operations are more convenient than oil lamps and have a good atmosphere, but the required gas tanks are dangerous and explosive items, which are dangerous.LED lights are easy to use, simple operation, and strong practicality, so they use more. Of course, if possible, you can also prepare several Camping lights. LED lights make Tent lamps, steam lamps and kerosene lamps for Camping atmosphere Lights.It is also very good.

3. Multiple Camping lights matching suggestions

1. The main lamp source is recommended to use the LED white light or more light lighting and oil lamps and oil lamps.

2. You can prepare more headlights or flashlight overnight, as well as endurance items required for lamps, such as batteries, kerosene, gas tanks, etc. need to be prepared in advance.

3. The Camping atmosphere light can be used for decoration for LED lamps and skewers.

4. Add lamp racks according to the camp environment. When there are many mosquitoes in summer, yellow light Lights can be hung on the height of the lamp rack to stay away from the Tent to attract mosquitoes.

1. What is a single -arm street light

There is only one light pole of the general lighting street light. On the top of the light rod, a branch arm is equipped with a lamp head to provide public lighting. We call this street lamp as a single -arm street lamp, also known as single -arm light.Single -arm Lights are divided into ordinary sodium lamps, single -arm street lights, energy -saving lamp single -arm street lights, pyrine single -arm street lights and LED single -arm street lights.

Single -arm Lights are the most common type in road Lights. There is only one arm. The pole body uses Q235 low -carbon high -quality steel bending welding at one time. The weld is Smooth and Smooth.The appearance is beautiful, simple and Smooth, and is usually installed on both sides of the river, slope, or wider road surface to play a role in lighting road conditions and guiding safe driving.

2. What is the lamp of both arm street lights

Both arm lamps are derivative lamps of single -arm street lights, that is, two branches on the top of the light pole, two lamp heads are installed, and the roads on both sides are illuminated.

The two branches of the arms have a certain symmetry, which is more abundant than the shape of a single -arm light. Generally, it is installed on a multi -away green Belt or a road section with special lighting requirements.energy.

What is the difference between one -arm street lamp and binocular street lights

1. Different shapes

The main difference between single -arm street lights and arms street lights is the shape. Single -arm street lights are one arm, and the top of the light rod of the arms street lights has two branches, and it is symmetrical.The street lights are more beautiful.

2. Different installation environment

Single -arm street lights are suitable for wider roads such as residential areas, rural roads, factories, parks, etc., and both arm street lights are mostly used on the two -way roads on the road and some special lighting road sections that need to take into account both sides of road lighting at the same time.Essence

3. Different costs

Single -arm street lights only need to install one branches and one lamp head. The installation cost is definitely lower than the arms street lights. However, in terms of use, the arms street lights can take into account the roads on both sides with only one light pole.Installed on both sides, generally, the arms are more energy -saving and environmentally friendly.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. What are the guard lighting Lights

The lighting source should adopt various high -efficiency energy -saving fluorescent Lights and incandescent lamps.It should also meet the requirements of lighting places, color rendering, and anti -glare.

2. How to set guard lighting

1. The air defense basement should have normal lighting and emergency lighting at the normal and wartime lighting. Usually lighting should also have duty lighting, and transitional lighting should be set at the entrance.

2. The light -defense basement of the Pingli war should be determined according to the following requirements:

1. The illumination of normal lighting should be determined by referring to the illustration standard of similar ground building.It is necessary to adhere to work with high visual requirements for a long time, which can appropriately improve the degree of illumination standards.

2. Lantern and its layout should be coordinated with the function and building decoration;

3. lighting or emergency lighting that can be controlled alone in normal lighting should be used in normal lighting.

3. The transition illumination of the air defense basement should adopt a natural light transition. When the natural transition cannot meet the requirements, artificial lighting transitions should be used.The transitional lighting should meet the needs of people in and out of the basement in sunny, cloudy days, and night personnel.The current of each lighting single -phase branch should not exceed 16A.

4. Two AC220V10A single -phase three -hole splash -proof sockets should be provided with a cleaning room and inspection room.

5. At 1.5m from the ground near the sampling point of each filter absorber in the filtration room, 1 AC220V10A single -phase three -hole socket should be set.

6. Medical ambulance engineering, professional team members covering part, and first -class personnel covering the anti -communication duty room shall be set up in the AC380V16A three -phase and four -hole sockets, one circuit breaker, and 7 AC220V10A single -phase three -hole sockets.

7. Anti -ization communication room of the second -class personnel should be set in the AC380V16A three -phase and four -hole socket, one circuit breaker, and 5 AC220V10A single -phase three -hole sockets.

8. The anti -chemical equipment storage room should be set with 1 AC220V10A single -phase three -hole socket.

9. The selection of lamps should be selected with a lighter line Hanging or chain chandeliers and bayonet lamp heads.When the indoor net height is low or the usual needs are used to choose the ceiling light, the defense drop protection network should be added during the war.

10. The lighting of the passage, entrances, and public rooms and room lighting should be powered by different circuits.

11. The lighting power circuit from the protective area to the non -protective area. When a power circuit is shared in the protective area and the non -protective area lamps, a short -circuit protection device should be set on the inside of the protective closed door and the inside of the linked Battle.The lamps in non -protective areas are set up separately.

12. At the time of war, the main entrance and exit of the closed door to the channel lighting power supply from the ground to the ground should be supplied by the human electrical anti -power source cabinet within the protective unit. It is not advisable to use the power system power supply.

[Gong Lantern] What is the palace lamp?

What is the palace lamp

The palace lantern began in the Eastern Han Dynasty and flourished in the Sui and Tang dynasties. It has a strong local characteristics. The palace lamp as the name suggests is the lamp used in the palace.It is famous for its graceful and luxurious and full court.Due to the long -term palace, in addition to lighting, it is also equipped with fine and complicated decorations to show the wealth and luxury of the emperor.The orthodox palace lamp is in star anise, hexagonal, and four -corner. The contents of the drawing screens on each side are mostly dragons and phoenixes, Fushou Yannian, auspicious Ruyi, and so on.

Palace lantern practice

Skeleton

The relatively simple shape of the paper lanterns is cube or cylindrical body. It is best to use the bending bamboo branches or bamboo Skin to form a frame.If it is not easy to find, the slender hard cardboard and the bamboo sticks for barbecue can also be lacking strong and flexible, but it is also a very good decoration in the room.

Make a lamp body

Buy a few pieces of white, red ordinary rice paper or sprinkled gold rice paper in the four treasure shops of the Wenfang, which is cut into the length and width that conforms to the lantern skeleton, and you can design the pattern on your own.Calligraphy, painting, and paper -cutting can all show their style on the small lanterns.After being good, you can also use the narrow strip paper upper and lower edges, which look more elegant, very much like ancient palace lamps.If you are not good at calligraphy and calligraphy, there is a simple way for reference.Use a piece of paper to draw the words you want on the post, and then overlap this thin paper and dark red rice paper together, and dig the handwriting with a single -edged blade.Remove the thin paper, and the hollowed handwriting appeared on the red propaganda paper.Use white rice paper to make the lamp body, the red mission paper pastes inside, the candlelight or light is mapped from the hollowed out, the effect is quite beautiful.

Make light source

If you put it indoors, you only need to light a ordinary candle in the lantern; if you want to carry it out, it is best to use a Light bulb and battery to make a simple circuit.

[Reserve location of the front light wire of the mirror] Why should I install the lens front light front light wire reserved location?