1. home Solar lamps, okay?

Solar Lamp is a new type of environmental lighting lamps. It uses solar energy as its main energy. As people's environmental awareness is strengthened, Solar lamps are used in major fields. Common Solar street lights and Solar courtyard Lights.How about the lamp?

Generally speaking, Solar lighting lamps are also better. On the one hand, its power consumption is relatively low, because it can collect solar energy. If it is rainy weather, it can also be used by the solar energy stored before, or the municipal power function; on the other hand, on the other hand, it can be used;The home Solar Lamp is also relatively safe. Usually, 9V voltage is used to power, and there will be no errors to touch the lamp head and electric shock.

Solar lamps have two types: split type and integrated. Generally, families are more suitable for using integrated Solar lamps. Although the efficiency of solar energy may be less efficient, it is more convenient.

2. How to install Solar lantern hives

The family uses Solar lamps must be installed first. The installation of home Solar lamps is divided into four parts: battery board, battery, controller, and wire. The specific installation method is as follows:

1. Install the panel

Determine the tilt angle of the battery board according to the local latitude and other to ensure that the battery board has sufficient Solar irradiation.After determining the angle, fix the bracket at the position of the Solar light, and fix the battery plate on the bracket.

2. Install the battery

According to the design requirements, dig the box pond well, and put the buried box with the battery into the pool, lead to a wire Tube, and cover the cement board.Before putting the battery in the ground box, you need to determine whether the battery is intact. It is usually recommended to put in the same model and the same specifications and connect the battery in series.The burying boxes need to be used for glue, and the protective Tube is tightly fixed.

3. Install the controller

The controller generally uses a special controller of Solar power supply. When the connection is connected, connect the wiring terminal of the battery on the controller, and then connect the photovoltaic panel wire wire, and finally connect the load terminal.Be sure to pay attention to the battery, photovoltaic battery panel, load,-extremely cannot be connected, otherwise it may cause short circuit.After connecting the line, place the controller in the lamp column and fix it with bolts.

4. Pay the wires

Put the lamp head on the lamp arm, adjust the irradiation angle, and tighten it with the screw.Connect the lamp head line with the Solar panel and tighten the waterproof joint.After receiving it, test whether the Solar Lamp can be used normally, and it can be put into use normally.

1. precautions for the installation of courtyard Lights

1. Pay attention to personal safety when installing

Pay attention to personal safety when installing the courtyard light, do not shock.When you are grounded, you should pay attention to the metal columns and lamps that are close to the naked conductor should be connected with the PEN line.

2. The light source of the garden lamp

The light source of the courtyard light should be installed with a small -power color rendering high -pressure sodium lamp, the golden capacity of the halide lamp, the energy -saving lamp and LED light.

3. The wiring of the garden light

When you are grounded, you need to pay attention to the metal columns and lamps that can be connected to the naked conductor should be connected with the PEN line. At the same time, the ground wire should be set up alone.At the same time, this can ensure that the garden Lights are more secure after installation and avoid safety accidents.

4. installation test of garden Lights

After completing the above installation work, the courtyard light needs to be allowed to be tried and observed whether the brightness of the lamps meet the regulations, and whether the brightness is stable, etc. In addition, the insulation test is required.To ensure the safer installation of the lamp.After completing the installation of the courtyard Lights, it is necessary to check the working status of the courtyard light and the operation of the switch, etc.

2. What problems should be paid to the use of courtyard lamps

Do not hang items and dry clothes on the lamps, otherwise it will easily cause the lamp to damage.

Check whether the brightness of the lamps regularly is normal. If there is a light, the lamps are dark, flashing, etc., the light bulbs should be replaced in time to avoid aging of the lamp.

maintenance of lamps regularly, including water -resistant paint and cleaning inspection light boxes, can extend the service life of the lamp.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

lighting lamp installation method of various lamps for various lamps installation precautions

lighting brand

The installation of lamps in home decoration should be detailed, because it must be used for a long time and cannot be easily damaged, otherwise it will affect family life.Let's take a look at how the lamps should be installed in home decoration.

1. Before installation, the lamps and its accessories should be complete, and there are no defects such as mechanical damage, deformation, paint peeling, and lampshade rupture.

2. According to the installation venue and use of the lamp, the minimum cross section of the wire core of each lamp should meet the requirements of the relevant regulations.

3. When installing electrical lighting devices in the masonry structure, embedded hooks, bolts, screws, expansion bolts, nylon plugs or plastic plugs should be used; wood wedges are strictly prohibited.When the design is irregular, the bearing capacity of the above fixed parts should be matched with the weight of the electrical lighting device.

4. In large risk and special dangerous places, when the height of the lamp is less than 2.4 meters from the ground, a lighting lamps with a rated voltage of 36 volts and below should be used or protective measures are taken.The lamps must not be installed directly on the flammable items; when the surface of the lamp is high -temperature parts*nearly flames, the heat insulation and heat dissipation measures should be taken.In the substation, the high -voltage, low -voltage power distribution equipment and the parent line should not be installed with lamps.The height of the Outdoor installation is not less than 3 meters away from the ground; when it is installed on the wall, the height from the ground should not be less than 2.5 meters.

The wiring requirements of the lamp snail mouth lamp head

1. The wiring should be connected to the terminal of the center contact, and the neutral line should be connected to the terminal of the thread.

2. The insulation shell of the lamp head should not be damaged and leaked.

3. For the light head of the switch, the switching handle should not have a naked metal part.

For ceiling lamps equipped with incandescent bulbs, the light bulbs should not be close to the lampshade; when the distance between the bulb and the insulation platform is less than 5 mm, the heat insulation measures should be taken between the Light bulb and the insulation platform.

The installation requirements of the lamp

1. When the steel pipe is used as a lamp, the inside of the steel pipe should not be less than 10 mm; the thickness of the wall of the steel pipe should not be less than 1.5 mm.

2. The lamp lines of the chain lamp should not be tensile, and the light line should be compiled with the crane.

3. The ends of the soft lines of the soft line chandelier should be used as a protection buckle, and the core wires at both ends should be tin.

4. Lights installed in the same room or place, the heart line deviation should not be greater than 5 mm.

5. The fluorescent lamp and high -pressure mercury lamps and its accessories should be used for use, and the installation location should be convenient for inspection and maintenance.

6. The fixation of the lamp should be firmly available.The screws or bolts for each lamp should not be less than 2; when the diameter of the insulation platform is 75 mm and below, 1 bolt or screw can be used.

Special lighting requirements

Emergency lighting and evacuation instructions used in public places should have obvious signs.Public places without special personnel should be equipped with an automatic energy -saving switch.

Each lamp should be installed on the phase line.The wire of the street light is introduced from the airline, and a waterproof bend should be used at the entrance of the lamp.

36 installation requirements of lighting transformers below

1. There should be short -circuit protection on the side of the power supply. The rated current of the fuse should not be greater than the rated current of the transformer.

2. Any end or CITIC point on the shell, iron heart, and low -voltage side shall be grounded or zero.

lighting requirements fixed on the mobile structure

Its wire should be laid on the inside of the mobile architecture.During the mobile architecture activity, the wire should not be tensile and worn.

When the weight of the chandelier is greater than 3 kg, the embedded hook or bolt should be used; when the soft line chandeliers weigh more than 1 kg, a Hanging chain should be added.

installation requirements of metal halide lamps

1. The installation height of the lamp should be greater than 5 meters. The wire should be connected by the wiring column to the lamp, and the surface of the lamp shall not be available.

2. The lamp Tube must be used with a trigger and a current restricator.

3. A reflective lighting lamps installed on the ground should take protection measures.

installation requirements of decorative lamps embedded in the ceiling

1. The lamp should be fixed on the special framework. The wire should not be close to the lamp case, and there should be a balance in the light box. The frame of the lamp should be close to the ceiling surface.

2. The frame of the rectangular lamp should be parallel to the decoration of the ceiling surface, and its deviation should not be greater than 5 mm.

3. The open lamp lamps of the fluorescent lamp Tube should be arranged neatly, and the interval tablets of the metal or plastic should not be distorted.

The installation requirements of lanterns

The diameter of the diameter of the fixed lanterns shall not be less than the diameter of the lamps and the hook, and shall not be less than 6 mm.For large lanterns, the fixed and suspension device of the crane lamp should be performed by 1.25 times the weight of the lamp.

The glass hood of large lamps installed in large places should take measures to prevent splashing downwards according to design requirements.

installation requirements of neon Lights

1. The lamp Tube should be intact and no damage.

2. The lamp Tube should be fixed for the dedicated insulation bracket, and it must be firmly available.Specialized bracket can be controlled by glass.The minimum distance between the fixed lamp and the surface of the building and the structure should not be less than 20 mm.

3. The length of the lamp for the dedicated transformer for neon Lights shall not exceed the allowable load toxic.

4. The installation location of the neon lamp specialized transformer should be hidden and easy to repair, but it should not be installed in the ceiling, and it should not be touched by non -inspectors.When it is installed, the height should not be less than 3 meters; when it is less than 3 meters, protective measures should be taken; waterproof measures should be taken during Outdoor installation.

5. The secondary wires of neon lamp -specific transformers and the connection between the lamp between the pipes should be used.

6. The distance between the two wires of neon Lights and the surface of the building and structure should not be less than 20 mm.

The installation requirements of chandeliers

For ordinary Hanging wires, if the lighting weight is below 1 kg, it can be lifted directly with a soft guide line and more than 1 kg. If the Hanging chain is lifted, the soft wire should be in the iron chain to prevent the wire from being tensile.

When the soft wire chandelier is buckled in the suspension box and the lamp head.When a sip of the steel pipe as a lamp, the inner diameter of the steel pipe is generally not less than 10 mm.For those who weigh more than 3 kg of lamps, the connection with the ceiling must be hook or bolts that are embedded.Fixed hooks such as fixed steel cannot be less than 6 mm in diameter.

When a fixed large chandelier is hung with a dedicated twist, it should be done: the spiny wheel of the twisted car must have a available locking device; the tensile strength of the twisted steel wire rope should not be less than 10 times the weight of the lanterns.The installation of the lamp must be anti -shock.When the metal shell of the lamp must be grounded, the ground bolt should be connected to the ground network.

When the lamp uses the screw -mouth lamp head, the phase line should be connected to the top of the lamp head, and the screw mouth is connected to the screw.The garden light should be installed with a fuse.Install lamps must be burned.When a variety of lamps are in the flammable structure or installed in a wooden ceiling, fire prevention or heat insulation should be performed around the lamp.Boured tungsten lamps cannot be installed on wooden or other flammable materials.Install lamps to make itself line with the indoor building lines.The side of the rectangular lamp should be parallel to the decoration of the ceiling.When the lamp is installed symmetrically, its vertical and horizontal central axis should be on the same straight line.Multi -mounted opening lamp lamps.The arrangement of the lamp should be neatly arranged.

precautions for installation of lamps

First of all, the most basic requirement of lamp installation is to be firm.

When the bedside lamp, table lamp, mirror front lamp, floor lamp, Wall lamp, etc. are installed in the room, the height is less than 24m and below. The metal shell of the lamp should be reliable to ensure the safety of use.A ground wire should be added at the lamp box during the wiring.

When installing various types of lamps, the installation instructions should be installed according to the requirements of the lamp.In addition, the dark line in the ceiling or wall plate must be protected by flame retardant sleeves.When the lighting weight is greater than 3kg, it should be installed with embedded hooks or directly fixing the sling frame from the roof (the lamps cannot be installed with a Hanging top keel bracket).The wire application hose led to the light head box box is protected to the lamp to prevent the wire from being exposed to the flat top.

When the bathroom and the kitchen are equipped with short -feet lamp heads, the porcelain snail mouth is short.The wiring and phase line (switch line) of the threaded lamp head shall be connected to the central contact terminal, and the zero wire is connected to the threaded terminal.

The most important and basic and most basic in the installation process: the lamp head with switching and other switches. For safety, the opening handle should not have a naked metal part.

maintenance of lamps

lighting must be used at the scheduled voltage and frequency.

All ground lamps must be checked frequently.

Special restrictions and specified lamps are generally used when the ambient temperature is 5-35 C.

The lamps used indoors cannot be moved outdoors.

Electrical, gas, kerosene stoves and other heater or their components or places directly encounter steam should not be used.The lamp cannot exceed the specified lamp.When changing the Lights and disassembling the cover and the fuse, the power must be cut off.

Safety lighting lamps should be checked to ensure that no abnormalities occur.

The accident lamps cannot be used after the Lights are urgently turned on at high temperature gas (140 degrees Celsius), and new lamps should be replaced.

Do not place paper and cloth such as near the Lights or cover the lighting.

There must be no places to repair lamps with dangerous objects such as gas and steam, but should be carried out in general places; when not in progress, safe operation must be guaranteed.

Wipe the lamps with warm water scrubbing or worting soapy water. Do not scrub with gasoline and volatile oil.

The metal part of the lamp cannot be used at will.

The dust behind the lamp should be cleaned with a dry cloth or dumplings.

When abnormal conditions occur during the use of lamps, use it to stop using, cut off the power, and check.

The front light of the mirror is the lamp on the dressing mirror, and the light on the bathroom mirror. Generally, it refers to the lighting fixed on the mirror. The role is to clear the mirror, making it easier for people to look at themselves to see themselves.

Because the mirrors of the bathroom cabinet are installed on the wall, the Lights in our room are installed in the middle of the roof.So when we look in the mirror, our back is facing the light, and our face will look very dim, the color is unknown, which has a great impact on our facial cleanser.With the front light of the mirror, our face will be very clear, so when installing the bathroom mirror, you should install the front light of the mirror.

1. How to install the front Lights of the bathroom cabinet mirror?

The installation height of the front lamp

When decorating a house, you should first consider the approximate location of the bathroom cabinet and mirror, so that we can be sure of the approximate position we reserved, so what is the height?Under normal circumstances, if you install the bathroom cabinet, then the mirrors are on the bathroom cabinet, so the highest position of the mirror is between 1.7 meters and 1.8 meters.Do not exceed 1.8 meters when the front light line.People often put the reserved line at 2 meters. The mirror cannot be closed, which will affect the overall beauty of our room.

precautions for installation of bathroom cabinet mirror

1. Observe that the aluminum part of the front light Tube of the bathroom cabinet mirror has a label one end and defaults to the positive extreme. If the lamp Tube is installed, the power is not bright. Please change the ends of the T5 lamp Tube.If you still do not lighten up, please return.

2. Be sure to distinguish the input and output end of the front light of the bathroom cabinet mirror.

3. bathroom cabinet mirror front lights should pay attention to the waterproof and riot effects when installation. Under the conditions of high temperature and humidity, it should still maintain a high usage rate. At the same timeThe noodle wash basin or toilet should be carefully checked at the same time.

4. When the output line of the welded power supply, you must clear the input cable and the input cable of the switch on both ends of the front lamp rack at the front lamp rack of the bathroom cabinet.

5. Do not use the power to install the front Lights of the bathroom cabinet mirror.

Second, which is the best front light

Depending on the installation location, it can be divided into; the front light of the handwashing, the front light of the bathroom mirror, the front light of the bathroom mirror, etc.

Pay attention to the consistent style in the selection of the front Lights of the mirror.The color, shape, and style of the front lamp must be commensurate with the style of indoor decoration and furniture and echo each other.Selecting the front light of the mirror mainly depends on its light effect, that is, the effect of light reflection after lighting.The front Lights of the mirror should be integrated with the overall style of the bathroom, either quaint, or new rhyme, nostalgic, or avant -garde, or romantic romance, which can be reflected through light and shadow to enjoy the beauty of the Lights.

The color matching of the front lamp

For the lighting of the front of the dressing mirror, the color can be matched according to the style of the bedroom, which is more likely.The front lamp used in the bathroom is generally used with anti -fog mirror front lights.Then the light of the front light of the anti -fog mirror is mostly white or yellow.White belongs to the versatile color. It is most classic with black. It can also be paired with other colors to create different fashion color space.Yellow and elegant, with other bathroom products with the same color system, such as brown bathroom cabinets, pale yellow marble table pots, etc., create an elegant bathroom space.

The space of the front light of the mirror

In addition to its basic local lighting functions and safe use functions, it can also give the entire room's furniture color, matching, and structure matching to play a finishing touch.Either quaint, or new rhyme, nostalgia, avant -garde, rural style, or urban romance.Then each Mirror front light, whether the light is turned off or bright, is a artwork.

Third, the cleaning of the front lamp

1. It is best not to clean it with water. Just wipe it with a dry cloth. If you accidentally touch the water, dry it as much as possible. Do not wipe it with a wet wipe with a wet cloth immediately after the light is turned on.

2. In terms of cleaning, the lampshade of the cloth cannot be flushed. It can be used in a dry cleaner. If it is made of glass, it can be washed with water. Just wipe the skeleton of the lamp.

3. cleaning the front light of the mirror with vinegar is a good way.Pour the amount of the beer bottle cap in the half pot of water. After mixing it, soak the rag in the vinegar water, and the rag that is twisted to wipe the dust on the lamp.Because vinegar has the effect of cleaning and preventing static electricity, the lamps wiped with vinegar are not only bright but not easy to dip the dust.

4. When cleaning the light body, wipe it gently with a soft dry cotton cloth. The movement should be kept from top to bottom. Do not rub it back and forth.When cleaning the lampshade, it is advisable to use clean chicken feathers to prevent the lamp cover or deformation.

1. What is Solar Camping lamp

Solar Camping lights, as the name suggests, are a Solar power supply system, which can use Solar charging Camping lights. Many Camping time now is long. Ordinary Camping lights cannot provide too long battery life.Camping lights can be charged with solar energy, which is very convenient. Not only can it be camped, but this Outdoor light can also be used at night fishing, car maintenance, garage, etc.

Second, the structural principle of Solar Camping lights

1. The structure of Solar Camping lights

Solar Camping lights are composed of Solar battery components, LED lamp sources, Solar controllers, batteries and other parts. The battery components are generally used for polysilicon; LED lamp heads are generally used in ultra -high bright LED light beads;It has light control anti -anti -connection protection; batteries are generally environmentally friendly to maintain lead -acid batteries.Camping lamp shell materials generally use environmentally friendly ABS plastic and PC plastic transparent cover.

2. The principle of Solar Camping lights

When the Solar Camping light system is simple, when the Solar panel is induced to the sun during the day, the light is automatically turned off to enter the charging state. When the night comes, the Solar panel sensor does not reach the sun, and the battery discharge state is automatically entered and the light is turned on.

3. Is Solar Camping light easy to use?

Solar Camping lights are an Outdoor lamp, which are mainly used during Camping. This is a very useful Camping light.

Compared with ordinary Camping lights, Solar Camping lights can be charged using solar energy. The natural light sources of nature are used to reduce the consumption of electricity, energy saving and environmental protection, and can provide longer battery life; many Solar camps also have intelligent control.The brightness of the Camping light can be adjusted automatically according to the natural brightness, which can be said to be very useful.

Of course, Solar Camping lights also have a disadvantage, that is, its price will be higher than ordinary Camping lights.