1. What battery is used for Solar street lights

Solar street lights are environmentally friendly street lights that use solar energy to power on street lights. Generally, solar energy is a crystalline silicon Solar cell power supply. The battery stores electrical energy. There are four commonly used batteries:

1. Lead -acid battery

The pole plate of the lead -acid battery is composed of lead and lead, and the electrolyte is a hydraulic solution of sulfuric acid.Its main advantage is that the voltage is stable and the price is cheap; the disadvantage is that it is lower than energy (that is, electrical energy stored per kilogram of battery), so the volume is relatively large, the service life is about 300-500 deep cycles, and the daily maintenance is frequent.The industry is still used in large quantities.

2. Collagen battery

Collagen battery is actually a upgraded maintenance version of lead -acid batteries. It is replaced with colloidal electrolytes to replace sulfate electrolytes. It has improved in terms of safety, power storage capacity, discharge performance and service life.Some are even higher than the ternary lithium battery.It can be used within the temperature range of -40 C-65 C, especially the low temperature performance is good, suitable for high-cold regions in the north.Seismic resistance is good and can be used safely in various harsh environments.The service life is about doubled than the ordinary lead -acid battery.

3. Tricss lithium battery

Higher, small, fast charging, high price.The number of deep cycles of ternary lithium batteries is about 500-800 times, and the life span is about 1 times longer than the lead-acid battery, and the temperature range is -15 C -45 C.However, the disadvantage is that it is not stable. The ternary lithium battery of the unqualified manufacturer may explode or fire when the temperature is over -charging or the temperature is too high.

4. Lithium iron phosphate battery

Higher, small, fast charging, long service life, good stability, and of course the highest price.The number of deep-loop charging is about 1500-2000 times, and the service life is long, which can generally reach 8-10 years. The stability is strong, the use temperature range is wide, and it can be used at -40 C-70 C.

2. How much is the battery of Solar street lights

The battery voltage of Solar street lights is generally between 12 volts and 24 volts, and it is a DC voltage.The related component configuration of Solar street lights is:

1. 24VLED: Choose LED lighting, LED lights have long service life, soft light, and reasonable price. It can be adjusted during the scarce time of night pedestrians, which is conducive to power saving, which can reduce the configuration of the battery board and save costs.About 80-105LM per tile, light failure is less than year 5%.

2, 12V battery (string 24V): Choose lead acid to maintain the battery, moderate price and stable performance.

3. 12V battery board (string 24V): The conversion rate is more than 15%single crystal positive film.

4, 24V controller: MCT charging method, briefing function.

1. What is the landscape lamp

The Landscape light is an indispensable part of modern landscape. It not only has high ornamentality itself, but also emphasizes the coordination and unity of the landscape of art lamps, the historical culture of the scenic area, and the surrounding environment.Landscape lights use different shapes, different light and brightness to create landscapes.For example, the red light lantern -shaped Landscape light brings a festive atmosphere to the Square, and the green coconut lanterns set up a tropical style at the edge of the pond.Landscape lights are suitable for landscape places such as squares, residential areas, and public green spaces.

two,Landscape lighting LanternWhat are the

1. Large -scale scene lamp:The height is 4-8 meters, and it can be used as a sculpture during the day. The dual effect of lighting and lighting at night is available to set off the people's space atmosphere.

2. Landscape street lights: Generally, the height is 6-12 meters. The height of the street lights needs to be coordinated with the road width during specific operation.

3. Garden Lights: 2.5-4 meters in height, rich in style, mainly used in residential areas and some scenic spots.

4. Lawsticks: The height is 0.5-0.8 meters, which is a decorative lamps. It has the function of auxiliary lighting for some areas with low lighting.

5. Buried lamp (buried lamp):There are also rounds in appearance, mainly buried on the ground, used to decorate or indicate the use of lighting, and some are used to wash walls or trees. Its applications have considerable flexibility.

6. Tree lamp: It is installed around the trees, and there are few lamps dedicated to this. Buried Lights and Lights can achieve this effect.

7.Underwater lightTheGenerally installed in the aquarium environment such as pools, Fountains, swimming pools, etc., you can provide special underwater lighting effects for these places.Underwater Lights can use a variety of colors and light sources to combine different lighting effects.At the same time, underwater Lights can also help people better observe creatures and plants in water, and enhance the fun and attractiveness of the aquarium.

8. Step lamp (side Wall lamp): The first is used for the steps of the staircase, and the small -scale part of the lighting makes people see steps and roads, which also set off the effect of the steps.

9. Wall lamp:The lighting equipment installed on the outer wall of the building can not only provide lighting for the building, but also play a role in decorating. In cultural sites, historical buildings, and high -end commercial blocks, Wall lights are widely used.

10. Vote the light: As the name suggests, the light is projected to a specific part, highlighting the key lighting,It is usually used in building lighting, Square lighting and sculpture lighting.

11. Public light: The light is scattered and attributed to the sources of the face.

12. Linear light: The power of the light source is not very large. It is often used in groups to outline large strip -shaped light.

1. The role of lawn Lights

1. lighting night

In the courtyard, in some public places, after using the lawn Lights, it can increase a little brightness at night, thereby showing the effect of litting nights.For people who walk at night, don't be afraid of dark paint night, walking is smoother, and it also plays a certain safety performance.

2. Decoration city

The light of the lawn Lights is softer and the colors are more diverse. Now with the continuous follow -up of design, people's needs are continuously improved. The current design has more shapes and the shape is ideal.In the evening, it is also very beautiful and generous, giving people aesthetics.The lawn Lights add a lot of safety and beauty for the most unique design and softest Lights to the green space landscapes throughout the city, and its installation process is very simple, easy to install, good decoration effect, usually used in parks, garden villasWaiting for the lawn, of course, modern commercial streets, pedestrian streets, parking lots and squares will be installed with a lawn light if there is a green Belt.

3. Anti -theft effect

Now there are Solar lawn Lights. It has a lot of use. It is a kind of lamps that make full use of solar energy. When used, it does not need to consume electricity. The efficiency is relatively high. This product uses solar energy.need AC power supply solves the contradiction between the product's insufficient brightness and the strong light time, which greatly improves its utilization efficiency.This Solar lawn light also has the function of automatic alarm, which can play a more ideal role of anti -thief and protect people's life and property safety.

Second, the main characteristics of lawn Lights

1 High brightness: now the new type of Solar lawn light can be adopted 140LM / wled Light source, more than conventional solar energy led Lawn lamp 50 %,

2 , High -quality and high reliability: The lawn Lights have high quality requirements. Manufacturers must choose advanced equipment, good materials to ensure quality, and check the materials for full inspection, grasp the quality of each production process, inspection of finished products, shipments, shipmentsInspection, strictly follow ISO The requirements of the quality management system are fully quality management.

3 Long life: the overall life of the lawn light 20 For more than years, the high -light glass layer pressure process is adopted. The design life of each accessories is consistent. The unique energy -saving design, the battery life is longer than the conventional technology 2 3 Times.

4 , Energy -saving: If it is a Solar lawn light, the generally used foot power crystal silicon Solar battery components are used as the power generation system for lamps. 3-5 In the evening, no other energy supply is required.

5 Automatic control: The lighting and extinguish of the Solar lawn light uses Solar light induction control, that is, the light control function, and at the same time, there is a energy -saving mode. In the case of less pedestrians at night, the output power of the light source is automatically reduced to save power.

6 High safety: Solar lawn Lights are low -pressure products, using DC 4V or 6V power supply, safe and harmless, effectively protect children, pedestrians and animals.

7 The lamp body adopts high -strength structural design, with high waterproof, wind resistance, and high external force.

8 Ease of installation: independent power supply, no need to set up or embedded power transmission lines, simple construction, low construction costEssence

3. What is the height of lawn Lights generally

Different specifications such as 600mm, 800 mm, and 1000 mm of lawn Lights can be customized according to actual needs. Any specifications can be made.The main materials of lawn Lights are equal steel pipes, heterosexual steel pipes, aluminum pipes, cast aluminum lawn Lights, aluminum alloy lawn Lights.Common diameters include 60, 76, 89, 100, 114, 140, 165. Depending on the height and the place used, the selected material thickness is divided into: wall thickness 2.5, wall thickness 3.0, wall thickness 3.5.Lawsticks usually use 36W or 70W golden halide lamp sodium lamps, and the layout spacing is generally 6 to 10 meters.

1. Outdoor landscape lighting design plan

1. The night scene lighting of the building

The night scene lighting of the building is the most commonly used are pan -light lighting, contour lighting, internal light lighting, etc.

The pan -light lighting of the building facade is to directly illuminate the facade of the building with a certain angle of light (pan -light) light from a certain angle of design and reshape the night image of the building.Its effect can not only show the whole picture of the building, but also can effectively express the shape of the building's shape, three -dimensional sense, stone material and material texture, and even decorative details.

Pan -light lighting is not simply reproducing the daytime image of the building, but using the means of light, color, and shadow of light lighting to reshape the building a more moving, pretty, and magnificent image at night.

The building contour is clearly outlined the outline of the building with wire light sources (string Lights, neon Lights, beauty light resistance, lighting pipes, LED light bars, general glowing fiber, etc.).Ending the edge of the building with narrow beam light can also outline the contour.

Internal lighting lighting is to use the indoor light or device to transmit light from the inside of the building to form the exquisite night scene lighting effect.

2. The night scene lighting of the Square

The shape and area of the Square are neither fixed and stylish. Setting lighting must seize the premise of satisfying functional lighting. According to the inherent characteristics of the Square, the function of the Square is fully played.

In first, the landscape lighting of the Square must first unify the landscape lighting of the buildings around the Square with the lighting of the Square. It is necessary to coordinate the lighting of the roads around the Square and the Square, and unify the inherent culture.

Square lighting is mainly: Fountain, Square ground and logo, tree array, underground shopping malls or subways, and environmental lighting composition of green spaces and flower gardens.

3. The night scene lighting of the bridge

Most of the modern bridges are modern steel cable -catching bridges with double tower cable and single tower cable.The shape of the cable bridge is characterized by pulling.The lighting of the bridge will focus on highlighting this characteristic. With different lamps and unique artistic methods, a huge harp stands on the river and river.

In order to set off the overall effect of the festive atmosphere of the bridge, along the road on both sides of the bridge, one art lamp can be placed every 4-5 meters to make the chain a flash of pearl necklace.

When the top light lighting of the main tower can be shot from the bottom in three aspects, the entire main tower should be shined with clear, white and flawless, and majestic. This is the top priority of the bridge landscape.

In order to illuminate all the main tower, the perspective effect is good, and a platform should be set up under the road. Use pan -light Lights to illuminate the tower base part from the top to bottom, so that the lighting effect of the high tower is like a giant standing in the river waterAbove it.

4. Landscape lighting of the tower

The tower body is usually composed of several basic parts such as the base, the tower body, and the top of the tower, which constitute a harmonious whole.The architect gave each part of the corresponding meaning when designing.They all have corresponding effects or functions. From aesthetic perspective, their aesthetic value lies in setting up a landmark for a area.Therefore, the complete lighting performance of each part of the tower body is very important, and the overall image of a certain part or a thicker alienation can be expressed alone.

The lighting settings of each part of the tower should consider the needs of or watch.The top of the tower is usually viewed from a long distance, and the lighting should be more appropriate.

The tower part is often a part with rich details and carrying architectural styles. It should be targeted to choose the lighting method, carefully portray the tower body components and carvings, and use the emphasis on lighting methods to perform the main part of the tower body.

The tower base is a near -people part. The lighting performance of this part is to complete the integrity of the tower body image. The lighting they set up should be taken into account the feeling of people when viewing at close distances.The configuration of projection direction should be aimed at people's visual comfort.

As far as the entire tower body is concerned, from the bottom up, the illumination of lighting should gradually increase, which can cause a towering feeling and in line with the visual laws of people when watching the scene.

5. Landscape lighting of overpass bridge

The traffic bridge is often on the main roads of the city, and it is an important part of the overall effect of urban landscape lighting.Watching the Lijiao Bridge from the distance from the distance, it is a lane that walks up and down, and then spreads around.The image of the lane is mainly expressed by the railing by the lane.The relationship between multi -level, multi -lane vertical overlap, and the performance of layers of depth can really reflect the charm of the landscape of the bridge.

Green and green spaces must be set up in the overrun bridge area to play an important role in the landscape environment of the adjusted bridge area, and it should be fully used.

Watching the panoramic pattern of the bridge from high -sighted point, including the outline of the lane side lines, the light composition and light sculpture in the green space, and the bright lines formed by the street lights in the bridge area. These lighting elements are integrated together to form an organic overall picture.Essence

6. Landscape lighting of water view

Water scenery is an important part of garden landscape.There are many forms of water scenery, with wide water surfaces and rippling large lakes. There are also water views such as streams, Fountains, waterfalls, and cement ponds.

The night scene lighting method on the water surface is mainly to use the actual scenery of the water surface and the lighting of the shore trees and railings to form a reflection on the water surface.Revelation and real scenes, compare each other, set off, positive and reverse, plus the dynamic effects of reflection, making people feel so beautiful.

For Fountains, waterfalls can be used underwater lighting, and underwater Lights of the same or different colors are arranged according to a certain pattern. The effect is amazing and has no interest.

7. Landscape lighting of trees

Trees are one of the four elements of garden landscape.There are many types of trees, with a variety of attitudes. In addition to beautifying the environment and for viewing, they also have the effects of regulating and protecting the environment.lighting should be treated according to the height, size, appearance characteristics and color of the trees.

8. Functional lighting of the Park road

The lighting method of the road in the Park: The road is the context of the garden, and the tourists are led to various attractions from the entrance.The path is winding and turning, giving people the effect of creating a step -by -step difference and a variety of paths.The lighting method should be carried out closely.

9. Landscape lighting of sculpture sketches

The sculpture sketch and logo in the garden are ornamental; the other is commemorative.lighting should be from the characteristics of the sculpture, especially for key parts such as: head, expression, materials, color, and surrounding environment, and use the side to go from top to bottom to light, and it is not appropriate to light up from the front., S three -dimensional lighting effects.The narrow beam lamps should be selected with a proper light source to avoid the direction of the vision of tourists and prevent glare interference.

10. Landscape lighting of ancient buildings

Chinese classical buildings can be described as unique and self -contained system. They all have their own inherent characteristics in terms of materials, shapes, planes, and space layouts.The main buildings are in the middle, and other buildings are developing on both sides according to the central axis.The architectural form is basically composed of three parts: step base, roof, and house body.

The roofs of Chinese classical buildings are often made into a soft curve. The surrounding eaves and stilts are covered with green gray tiles or glass tiles. This is one of the inherent characteristics of Chinese classical architecture itself.Therefore, accurately grasp this feature, and highlighting it in the form of lighting at night is the key to Chinese classical architectural lighting.

The door arch stacked by the staggered endwood has become a unique formation of Chinese classical architecture.Liangzhumen arch's oil decoration paintings increase the beauty of the building through gorgeous patterns.The use of appropriate lamps to select suitable light sources is the focus of Chinese classical architecture lighting.

For the layout, form, color and materials of Chinese classical buildings, the layout, form, color and materials of Chinese classical buildings are different from modern architecture. Therefore, the lighting, color matching, and lamps of lighting should be highlighted.Classical architectural culture and artistic connotation are carried out.

When designing specific design, it should be used flexibly, and different landscape lighting methods should be adopted according to the specific situation of the designed designs.

2. precautions for landscape lighting design

1. The unity of the overall and local, local and individual

Each landscape lighting project in the city is part of the overall lighting of the city. It must reflect the characteristics of the local area and the requirements of the overall planning of urban lighting.In the local area, the lighting of each building (constructed) or nodes should also be coordinated with the style and form of the area of landscape lighting at the same characteristics.Therefore, in the process of landscape lighting design, the positioning and style of landscape lighting projects must be determined from different spatial scale patterns. The impact of the surrounding environment on the project should be considered.The influence; considering the current needs of construction, there must be a certain forward to meet the needs of future sustainable development.

2. The unity of artistic and technical nature

The landscape lighting should consider the effect of lighting at different distances and different angles, and show the respective characteristics of each project at night. At the same time, the effect of the scenery of the daytime cannot be destroyed.Better consideration should be made.We often see such losses, some of the huge lamps and naked pipelines installed on the pavilion pavilion or similar (structure) buildings, which almost destroy the beauty of the original building;The projection angle and the installation location are unreasonable, which increases the difficulty of installation, is inconvenient to maintain, and even threatens the safety of tourists and pedestrians; some high -altitude walls are seriously corrosive.The light glass is close at hand.These phenomena can be avoided by ensuring the effects of lighting art.

3. The unity of the lighting effect and humanistic care

Landscape lighting is to meet the needs of tourists to appreciate the landscape at night. Therefore, it is necessary to emphasize people -oriented, and provide people with elegant and comfortable lighting environments, but also to provide a safe light environment.In the design, you can use a reasonable setting of the lamp position, the use of light interceptors, increase the lighting plate and grille, etc., to achieve the effect of lighting design, and avoid the occurrence of light pollution and safety.

4. Unity of technical and economical

In terms of design, landscape lighting projects should use technologies, materials and products that meet the conditions of green lighting to the greatest extent, and mostly use LED lights, T5 tubes, Solar lamps, energy -saving lamps, ceramic gold halogen Lights and other long life, high energy efficiency, stability, stabilityA good new light source meets the requirements of energy saving energy from the source, and improves the efficiency of the lighting system through various methods (such as electronic ballasts, capacitance compensation and other methods).In terms of the layout of the lighting system, the laying of the line, and the installation of the lamps, it is necessary to fully consider the convenience, fire prevention, anti -theft and maintenance convenience, and also use the principle of cost performance to consider the economy of investment.In terms of switching light control, regularly automatically controlled control, setting different scenarios such as weekdays, weekends, and festivals; in special circumstances, you can also flexibly adjust the time and scope of the switching light.Through real -time detection of operating conditions, timely discover and eliminate failures, reduce the labor intensity of maintenance, improve work efficiency, and thus have good social and economic benefits.

1. How high the garden lamp is generally high

The height of general garden Lights is between 2.5 meters and 5 meters.Modern garden lamps are mostly customized courtyard Lights, so the height can be customized according to customer requirements. Generally, 3 meters-4 meters are used in the community. The garden Lights on the sides of the road on both sides of the urban road or on both sides of the pedestrian road areGenerally at 4 meters to 5 meters; followed by some of the garden Lights produced by molds (such as the height of the courtyard Lights of die-cast aluminum), it is generally fixed at about 2.8 meters-3.5 meters.

2. Basic size of the garden Lights

1. The height of the garden light

The height of general garden Lights is between 2.5 meters and 5 meters.

2. The size of the courtyard lamp flange

The size of the courtyard lamp flange is generally 280x280, and the unit is millimeter.

3. Court -light burial size

The size of the courtyard lamp is 500cm.

4. The bottom size of the courtyard light

The basic size of the garden light base is 400cm.

5. Specifications of the garden Lights

The specifications of the garden Lights are 115mm and other diameters, 219mm, etc.

6. The courtyard light cone rod ratio ratio ratio ratio

The cone ratio ratio of the garden Lights is generally 11 .

Third, the practice of courtyard Lights

1. Sample sample

Positioning in strict accordance with the labeling in the construction drawings, according to the benchmark point and reference elevation delivered by the resident supervision engineer, use the level instrument to put samples, and submit it to the resident supervision engineer for inspection.

2. Guding pit excavation

Strictly excavate the foundation pit in strictly in accordance with the design requirements and geometric size. After excavation, clean up the base and consolidate the base.

3. Basic pour

(1) Strictly follow the material specifications specified in the design drawings and the method of systematic system regulations, carry out the system and installation of basic reinforced bars, and check the resident supervision engineers.

(2) Basic embedded parts should be treated with hot -dip galvanized treatment.

(3) The concrete pouring must be stirred strictly according to the material ratio, and poured according to the horizontal level. The thickness of the vibration must not exceed 45cm to prevent the two layers from getting off.

(4) Pour the concrete two times, and the first pouring to about 20cm above the anchor plate. After the concrete is frozen, remove the residue, accurately correct the embedded bolts, then pour the concrete of the remaining part, and ensure the foundation of the foundationThe level of installation level of the flange plate is not more than 1%.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;