Articles in Tags lighting-lighting

1. How big is the power of the probe lamp?

At the beginning of the detection lamp, it was a special lamps for military use. It was used for long -distance lighting and searching for enemies, and assisting the night war. With the development of electronic surveillance equipment technology, the military use of the detection Lights has gradually decreased.How much watt is the probe light?

There are many types of probe lamps, and different types of detection Lights have certain differences. For example, home -based exploration Lights are relatively small, generally about one or two hundred watts;, 500W, 1000W; The power of the pyrine detection Lights developed and designed for the field of Outdoor security monitoring is usually 1000W; there are some special use of high-power detection Lights, which are about 2kW-5KW.

The greater the power of the probe light, the greater the brightness of it, the farther the range, and the more expensive the price. When choosing, you can choose the appropriate power of the detection light according to actual needs.

2. Introduction to the main parameters of high -power search Lights

Ultra -power detection Lights are professional Outdoor special lighting equipment. Usually use high -pressure short arc lighting sources, which are large. They are widely used in prisons, docks, hydrological stations, oil fields, airfields, large construction venues, industrial and mining enterprises, field search and rescue, etc.Place, the following introduces the parameters of high -power exploration Lights:

Rated power: 1000W

Rated voltage: AC220V AC50-60Hz

bulb: High -pressure short arc lamp 1000W

Life of the bulb: 1000 hours (after 800 hours of light failure starts)

color temperature: 6000K

Light flux: 32000LM

Valid range: 850m-1100M

Rotating angle: level 0-355 , vertical positive and negative 60 degrees

Rotating speed: level 9 degrees per second, vertical 1 degree per second

Rotating limit: external limit column

Available heat dissipation method: forced wind and cold

Protection level: IP54

Weight: 10kg

Dimensions: 380mm*250mm*580mm

[Is it necessary to buy the front light of the mirror] Is the bathroom Mirror front light necessary? How to choose the front light of the bathroom mirror?

Is the Mirror front light necessary?

Because the mirrors of the bathroom cabinet are installed on the wall, the Lights in our room are installed in the middle of the roof.So when we look in the mirror, our back is facing the light, and our face will look very dim, the color is unknown, which has a great impact on our facial cleanser.With the front light of the mirror, our face will be very clear, so when installing the bathroom mirror, you should install the front light of the mirror.

In other words, the mirrors of the bathroom cabinet in the bathroom are generally fixed on the wall. The toilet Lights are generally installed in the middle of the bathroom. When the bathroom is in the mirror, the Lights are behind.It is very dark, and it is very uncomfortable when doing this facial cleaning.However, after installing the front Lights of the mirror, the face light is very clear, so it is necessary to install the front light of the mirror.

How to buy in front Lights of the mirror

1. Check whether the workmanship is safe and fine. This requires people to pay attention to details, carefully check whether there are scratches and damage, or problems with color effects. It is recommended that you choose rest assured brand products to get better protection.A perfect toilet Mirror front light not only depends on the workmanship, but also carefully detect its light source. It does not need to use scientific equipment. You only need to use the front Lights of the mirror in the dark, whether it is clear and whether the color temperature is moderate.

2. Safe first, take a closer look at the details of the front light: Consumers need to take a closer look at the light sources (lamp bile, light pipes), switches, and sockets when collecting the products of the mirror.Pick up lighting brand products in the New Year's Eve, and check the goods carefully.

Domestic products must go through the process of 3C certification and ISO9000 quality system certification. Some international brands have also obtained other countries and international security certifications. These will be marked in the product itself, packaging, or notes. These will also help you measure lamps.A standard for quality.

3. Pay attention to the consistency of the mirror headlights.The color, shape, and style of the front lamp must be equal to the momentum of indoor decoration and furniture, echoing each other.

Select the front light of the mirror, first look at its light effect, that is, the result of the light reflect of the light in the future.The front Lights of the mirror should be integrated with the overall momentum of the bathroom, either quaint, or new rhyme, or nostalgic, or avant -garde, or romantic, or they can reflect it through light and shadow photos, so that people can enjoy the beauty of the Lights.Essence

4. The core device of the front light of the bathroom mirror -the town flower. Generally, people cannot see the quality problem, but when we buy it, we must not talk about cheap and choose it.It is generally guaranteed in quality.

The Lights have been bright for a long time, and a lot of dust will be accumulated on it. If it is not clean for a long time, it will affect the lighting effect, so it should be cleaned and maintained regularly. Before cleaning, you must turn off the Lights.Wipe, pay attention to the direction, don't twist too tightly.

The lighting during the day is better, so it is not affected to sorting out your clothes in front of the mirror. If it will be affected in front of the mirror at night, because the Lights in our home are generally installed in the center of the living room, so the light is the light is the light, so the light is the light is the light, so the light is the light is the light, so the light is the light.Not enough.It is also very necessary to install a Mirror front light in front of the mirror.

Creative Wall lamp DIY wooden board making retro and romantic arrow Wall lamp

When I moved to Los Angeles for the first time, after doing a lot of money -saving flea market investigations, Mr. Lovely found that I liked one of the retro lamps.These Chinese lanterns are very popular now, and they only need to spend a few hundred yuan to buy manual replicas, but honestly, our wallet is really unbearable.So this time Mr. lovely came up and did a hand -made work of all men.

Big disclosure: In any case, I did not participate in this project.I mainly want to say, "Have fun!" After a while, I took a picture.But I obtained this tutorial from reliable news, so if you want to do one by yourself, then continue to read.

You need the following materials:

Ballical light line (to prepare a few beams)

Plywood

6 -inch thick rain -proof aluminum plate

Wiring saw

Drilling machine, screw up and 3/4 drill head

iron scissors

screw

Plutoid

Electric tape

Narut

Protective gloves

Put on your gloves!Put your splint and draw the arrow pattern you want.Mr. Lovely twice and cut it once with a thread.

Pass through the back of the arrow and twist a splint as horizontal support.The specific position of the bulb on the arrow is planned (we cut out the same size as the paper of the bulb to test, and the paper can be moved at any time).Gently make a mark with a pencil and use a 3/4 drill head to drill a hole at each mark.

Start with the twisted line of the lamp, unscrew the bulb and push the socket to the hole on the back.

Measure the size of the outside of the arrow, and cut a piece suitable for a long rainproof plate suitable for the outside of the arrow.Be careful when the board is filled with the corner.According to your familiar knowledge, tighten them at the right position and start at one end.The screw is 2-3 .

Twist the bulb in.Cut off the excess bulbs, and use upper clamps, tapes, and nuts if necessary to fix the extension line.

That's it!This is the man's work, right?And my husband hasn't sweated yet!(Lie, haha ...) But it is really simple.Now that our family has a retro atmosphere, we only spend a small part of money.What do you think of this work?Do you want to try to do one too?Haha ~

What is the wall headlight

On the wall headlights, the source of the lamp is generally energy -saving lamp.Materials are generally stainless steel, aluminum products, iron products.Spray static electricity on the surface of the lamp.The lamp body is generally welded with flat iron.

The appearance of the wall headlight is beautiful, and the lines are simple and beautiful.There are many styles and diverse forms. They are generally placed in communities, parks, or stigma, which are very appreciated.It is easy to install, convenient maintenance, and less power consumption.The lamp source is generally energy -saving lamp.Materials are generally stainless steel, aluminum products, iron products.Spray static electricity on the surface of the lamp.The lamp body is generally welded with flat iron.After the lamp is sprayed by electrostatic, the surface is Smooth, colorful, uniform in brightness, and has strong anti -corrosion performance requirements.When installing, four screws are generally fixed, and they have enough strength to fix it.

How to install the Wall light

The installation method of the Wall lamp is relatively simple. After the location is determined, it is mainly the fixation of the Wall lamp. It is often used to fix the wall headlights on the wall.

In the first step, according to the holes on the Hanging panel of the wall headlight, mark the position of the expansion screw on the wall.

In the second step, use an electric drill on the wall to make a drill on the mark. Pay attention to understanding the line layout diagram first, do not drill to the wire, but also pay attention to the depth of the holes of the drill.

In the third step, you can start to expand screws after drilling the holes. First, the expansion screws are stuffed into the already drilled holes, and then the expansion screws are hit into the wall with a hammer or other things until they all enter the wall.

The fourth step is to pass the wooden screws through the wall headlights and hang the plate holes, and then fix it on the expansion screws. Pay attention to the fixing of both sides to be performed alternately, so as to avoid turbulence of the wooden screws.

The fifth step is to connect the Hanging plate with the top plate with the screw, and then twist the bald screw to fix the suction plate.Finally, disconnect the indoor power supply, then connect the wire and power cord of the wall headlight, and install the wall headlight.

Wall lamp installation requirements

The installation height of the Wall lights is generally slightly higher than the flat line, probably1.8 About meters.The height of the Wall light is generally 1440 ~ 1850mm , To the ground is 2240 ~ 2650mm EssenceBut the distance between the Wall lights of the bedroom can be closer to the ground, probably 1400mm ~ 1700mm about.The distance from the Wall light to the wall is closer, usually 95mm ~ 400mm Essence

The wires connecting the wall headlight should be light -colored, which is convenient for coating the coating that is consistent with the wall color to keep the wall tidy.In addition, you can dig a small slot that is embedded in the wires on the wall, embed the wires, fill it with lime, and then apply the same paint as the wall color.

This is the installation requirements and methods of Wall lights. If you need to install the wall headlights, as long as you shared by Xiaobian, the wall headlight installation method can install the Wall lights by yourself.In fact, the installation method of the wall headlights is very simple. As long as you remember every step, the quality of the wall headlights installed will not be worse than a professional master.

1. How to charge the lighting project of the landscape

1. The industrial construction part (office building, corporate headquarters, administrative office building, etc.)

(1) It is charged at 15 yuan/Square meter with less than 5,000 Square meters.

(2) It is charged at 10 yuan/Square meter of 5,000 Square meters to 10,000 Square meters.

(3) At 8 yuan/Square meter of 10,000 Square meters to 30,000 Square meters.

(4) 6 yuan/Square meter from 30,000 Square meters to 50,000 Square meters.

(5) More than 50,000 Square meters of negotiation.

2. The residential part (unique apartment, commercial and residential building, high -rise residential buildings, etc.)

(1) It is charged at 9 yuan/Square meter with less than 5,000 Square meters.

(2) The 5000 Square meters to 10,000 Square meters is charged at 7 yuan/Square meter.

(3) It is charged at 5 yuan/Square meter of 10,000 Square meters to 30,000 Square meters.

(4) Received 3.5 yuan/Square meter from 30,000 Square meters to 50,000 Square meters.

(5) More than 50,000 Square meters of negotiation.

3. Multiple buildings (refer to the corresponding coefficient of the base of the residential part)

(1) When designing the building group, the building of the same facade is below the three buildings (including three buildings). The calculation of the lighting design is: the first building is calculated according to the above standards, and the second and third buildings are separately separated by each other.Based on the first building, it is charged by the 0.8 coefficient.

(2) When designing the building group, the building of the same facade is more than three buildings. The calculation of the lighting design charging is: the first building is calculated according to the above standards, and the second and third buildings are in the first building, respectively.Based on the 0.6 coefficient, it is charged.

(3) When designing the building group, the building of the same facade is below the three buildings (including three buildings), and the calculation of its lighting design charges with a building height of more than 11 floors is: The first building is calculated according to the above standards, and the above standards are calculated, and the above standards are calculated.The second and third buildings are charged by the 0.6 coefficient on the basis of the first building.

4. Commercial spaces such as hotels, clubs and other buildings

(1) It is charged at 15 yuan/Square meter with less than 3,000 Square meters.

(2) It is charged at 12 yuan/Square meter from 3,000 Square meters to 5,000 Square meters.

(3) The 5000 Square meters to 8,000 Square meters is charged at 10 yuan/Square meter.

(4) 8,000 Square meters to 10,000 Square meters of 8 yuan/Square meter.

(5) More than 10,000 Square meters of negotiation.

5. Noble residential garden landscape design

(1) It is charged at 5 yuan/Square meter with less than 3,000 Square meters.

(2) The 5000 Square meters to 10,000 Square meters are charged at 3.5 yuan/Square meter.

(3) More than 30,000 Square meters of 10,000 Square meters of 10,000 Square meters are charged at 3 yuan/Square meter.

(4) Those who negotiate separately above 30,000 Square meters.

2. List of Landscape lighting Project

1. design fee:Including on -site survey fees, design work fees, etc.

2. Main material fee:The main materials required for illuminating projects are various LED lights, power supply, controllers, etc.There are many LED lights, which should be listed according to the number, model and price corresponding to the renderings of the brightening solution, such as specifications, brands, quantities, unit prices and total amounts.How many lamps in the plan must be listed in detail in the quotation form.

3. accessories fee:The cost of paving materials is generally: cable, power distribution box, thread Tube, screw, plug.The auxiliary materials are relatively messy and must be carefully counted.

4. labor cost:Including installation fees, insurance premiums, etc., labor costs can be listed according to different prices required for installation of different lamps, or they can be listed with main materials.

Remarks: The installation fee can be roughly divided into two types of pricing:

(1) Calculate according to the amount of engineering:Number of construction days*Daily workers number*Average labor salary = installation fee.

(2) Calculate according to the number of lamps:The amount of the number of lamps is calculated*multiplied by the installation cost of each lamp = total installation cost.

It should be noted here that the cost of insurance contained in labor costs must be listed.The illumination project is a high -altitude operation.In order to ensure that public and private property is not damaged, it is necessary to pay insurance premiums for each worker and public property in accordance with national regulations.

5. Other expenses:The mechanical costs of cranes, scaffolding, cranes and other engineering vehicles used during the installation process, as well as taxes and fees involved in the later period must also be clearly listed.

The landscape lighting project quotation list is quite expensive. These aspects are only a big aspect. In addition, there are many other small costs. Generally, each of them needs to be recorded.To be in urban lighting, you need to make a budget in advance, and in the process of actual lighting, make a planning layout to make the money cost more value.

  1. 1
  2. ...
  3. 11
  4. 12
  5. 13
  6. 14
  7. 15