[folding bed maintenance] clean maintenance of folding bedfolding bed cleaning skills

1. If the folding bed is stained with stains, it can be wiped with fresh milk to make it more shiny and soft.

2. folding bed accidentally dipped in oil stains. You can wipe it with warm soapy water first, and then wipe it with a rubber.

3. If the folding bed is stained with a round bead pen oil, it is best to wipe it off with a rubber.

4. If you do not sprinkle beer, soda, and coffee on the bed, you can dry it with warm water first, and then wipe it with water.

5. If the folding bed is stuck to the gum, you can use the ice cubes to solidify and remove it.

6. If the folding bed accidentally dipped the cream, you can first suck it with a dry cloth, and then wipe it with a little cleaner.

7. Please avoid placing the folding bed in direct sunlight and humidity;

8. Do not use alcohol to clean stains to prevent products from being aging.

one,Often weartightsWhat are the disadvantages

1. Easy to suffer from vaginitis

In order to show their perfect figure, many women ignore the tight pants to bring beauty and vaginitis.Because tight pants are close to the Skin, there is no room for ventilation.After sitting for a long time, the body will discharge sweat or other secretions. If it cannot be ventilated in time, it will easily breed bacteria and infect the genitals.And if the vaginitis repeatedly occurs, the area of infection will be expanded, and it will even be infected to cervix and cause cervicitis, or infected until pelvic cavity causes pelvic inflammatory disease, and can be transmitted to the man through the life of the husband and wife, causing the man's urinary system disease.

2. It is easy to cause urinary tract infection

Due to the special structure of the body, women are more likely to be invaded by external bacteria than men, and have some diseases, such as urinary tract infections.Urinary tract infection is extremely common in women. This is mainly due to the short urethra of women, and the urethra is more likely to be attacked by bacteria than men.Moreover, women's urethral mouth is closer to the anus, and it is likely to be in danger of being attacked by E. coli.The crotch of tight pants is generally relatively low, and wearing a woman's pussy tightly.It is easy to bring these bacteria or stay there.Wearing tight pants for a long time, not paying attention to cleaning the pussy or not washing the pants, it is easy to bring urethral diseases to female friends.

3. "Nourishing" disease

tights are tightly in contact with the body, which is actually raising a lot of germs.There are a large number of symbiotic bacteria in the human body, and of course there are many pathogenic bacteria, such as E. coli, mold, anaerobic bacteria, etc. In normal environments, they can be in a balanced state.Some of the anaerobic bacteria like to breed in closed, dark and humid environments.Usually we wear tight pants, pantyhose, etc. It is a day. In addition, if you do not exercise often, you will breed a lot of germs under the tightly wrapped for a long time, which will cause inflammation.

4. Advanced dysmenorrhea and menstrual discomfort

What pants should I wear during menstruation?Many girls choose tight pants, because this can reduce the risk of leakage, but in fact, too tight pants can cause pressure on the lower abdomen, affect blood circulation, and may exacerbate dysmenorrhea and menstrual discomfort.At the same time, rubbing the delicate perineal of tights can easily cause perineal blood edema. The close -up and sealed environment can also breed bacteria and increase the chance of pathogenic.

5. Affect blood circulation and easily cause cold hands and feet

In order to make the legs look slender, tight pants are often tightly wrapped in the legs, and this design will not only cause gynecological inflammation, but also cause the entire leg to "suffocate".Experts say that in fact, no matter underwear, it is not good to wear too tightly. It is a constraint for the body, which will cause poor blood circulation.As the saying goes: "The flowing water is not rotten, and the household is not stingy." There are 12 meridians in the human body. A healthy person should be unblocked by 12 meridians.However, for some white -collar workers in the office, there are more more than when they are sitting, and when they are sitting, the pants are tightly stretched with the waist and abdomen, which can easily lead to poor blood circulation of the entire lower limb arteries, causing the meridians to fail to communicate., Insufficient blood circulation, causing symptoms such as frostbite and cold feet.

6. The groin becomes black

Of course, you choose tight -fitting pants, and you need to wear tight pantyhose to dress up. Is this your norm?But in fact, long -term wearing tight pants will cause the Skin color of the groin to deeper. This is because the Skin of the groin is delicate. If you wear tight pants for a long time, the fabric will be excessively rubbed with the Skin to form pigmentation.It can also cause dermatitis or folliculitis!

7. muscle aging waist and leg soreness

The body is shaping underwear and tight pants. It has a common feature: tightly wrapped muscles.In the long run, natural muscle strength degenerates, and muscles are more prone to old loss.This is very abstract, manifested in the symptoms that when the leg is cold or poor, it is easy to cause pain and other problems.And joint nerve disorders also bring a series of systemic symptoms, such as panic and chest tightness, cold sweat, etc.Especially tight pants that restraint your lower limbs are more likely to cause discomfort.In general, there are more time to stand than standing. The pants are tightly stretched with the waist and abdomen, causing the blood circulation of the entire lower limb arteries, and the weak resistance of the lower limbs is easily violated by the disease.When the legs are in a "bad environment", such as the stiffness of Erlang's legs, the air -conditioning wind blows straight and blows the legs, and the waist and leg soreness is faster than others.

Second, the problem with the taboos of the leg shape wearing tight pants

1. tight pants can cover you ugly, but it can also make you shorter, and the method of rescue falls on the high heels.When wearing tight body pants, you should wear a lighter and simpler style with your feet, such as fish mouth shoes.

2. Avoid lining nine -point tight pants with shoes tied to the ankle. A small Skin will be exposed on the ankle.Pay attention to the end of the sight and the shoes of the ankle. It can be matched with tight pants with a seven -point length. Because there is a lot of space between the pants and the shoes, it will help lengthen the visual effect of the lines of the feet.

3. For girls who cannot wear high -heeled shoes for a long time, when choosing flat shoes, they can start with slender shoe shapes or V -shaped details such as V -shaped or other directional details, which can also make the feet more slender.

4. MM with a straight leg, you can choose the style between the length below the knee and the center of the calf. Be careful not to choose the style of the ankle until the length of the ankle, so that the legs will be tightly wrapped, so that the curved lines will be more obvious.In winter, you can set double boots, and you can cover the shortcomings when you have styles.

5. Girls with thicker calf need to wear long and dark tight pants with long legs.It is best not to choose tight pants with a length of the calf belly. Because the sight falls in the position of the most flesh of the calf, it is more likely to cause the illusion of thick legs.

6. MM with thick thighs is suitable for choosing dark seven -point tight pants to cover the thick lines of the thigh.At the same time, you can wear A -line skirts, and compare the comparison of wide skirts and thin legs, resulting in a visual sense of long legs.

7. MM with short legs can pull the legs by selecting the same color as the bottom of the bottom. Because the consistency of color will extend the sight, it can cause the visual phenomenon of long legs.

8. Bright colors and patterns are more suitable for people with confident legs.MM, which is beautiful and dare to show, can also wear a variety of colors to attract the return rate.

Third, the leg shape is not easy to wear, any pants

1. Fat legs: Wear straight jeans with a little loose size, a little loose pants, etc., a slightly loose pants can make the fat leg shape look thin, which is a contrast function.

2. Round legs or a little bent: Wear elastic micro -jeans. Micro can cover the circle leg shape from the knee. It is best not to wear small feet. If you want to wear it, you have to wear a pair of middle boots.There will be no fat and curved legs, because the fleshy is the place where the calf is curved. If there is such a leg shape, then wear a little sports pants.

3. The leg shape is very short but evenly: it is best not to wear Harun pants. If it is a boy, it does not matter but has a hip -hop feeling. You must wear slender pants, small foot pants with short boots, shorts with shorts, and shorts with shorts.High -heeled sandalwoodEssence

How to identify the quality of folding beds?

Step/Method

1. Evaluate whether the folding bed/lunch break is firm and whether the bed foot will shake left and right.

2. Evaluate the workmanship of the folding bed/lunch break. There are rough scratches on the surface.

3. Evaluate whether the folding bed/lunch bed is convenient.

4. Look at elasticity.Lie down in person and turn around a few times. The good spring will not be moved or uneven, and it can immediately restore the original shape.

5. Look at stability.You can use both hands to shake and shake the product back, left and right, and sway, and the framework is firmly explained.

6. Pay attention to the quality of the bag.If you buy the leather, you can use the tip of your two fingertips to pull one place and pull it up. The feel is powerful.

7. Look at the craftsmanship.If it is a folding bed of the steel frame structure, it is necessary to pay attention to the Smooth and gap at the welding. The coating looks uniform and soft, and the surface of the steel pipes treated with plastic spraying process is high, more abrasion, and more shiny.And if the paint is used, the surface of the steel pipe is more likely to produce scratches and cause it to oxidize and rust, and there is no gloss.

[Production of folding bed] How to make the folding bed on the wall of the folding bed

For those who go to school or work in the metropolis, the most distressed is the small space for living.Especially in the first -tier cities, not only the rents are expensive, but the room space rented is very small, and there is no place to put Xi Mengsi in a row.Therefore, today I shared the production of this folding bed. When you need to use it, you can just turn down the bedboard. It is quite convenient to lift and lean on the wall when not in use.

How to make a folding bed on the wall

1. Main materials

Founded wood, wooden board, hand saw, hammer, wood screw, coarse sandpaper, pencil, etc.

2. Production steps

Today, the tutorial is the production of folding single beds. The size is based on the actual situation of your own. The conventional size is 80*180, 80*190 and 90*200cm. Generally, you can customize your appropriate size.EssenceHere we designed 80*180cm, with a bed height of 30cm.So how to make a folding bed?It is not difficult for a carpentry enthusiast or a carpenter. Let's take a closer look at the production method.

1. Nail -made bed frame

First cut the two Square woods of two and two 180cm with a hand saw, and use a wooden screw (or iron nail) to nail a 80*180cm folding bed framework.Then the 2.5cm position on the inside of the frame is added with a 75cm horizontal crotch (pictured), and a 165cm vertical gear is added in the middle.Finally, a few bedboards are nailed, so the simple frame of the bed is done first.

2. Make bed and feet

The height of the bed is about 28cm, which can be adjusted according to your needs.Four beds, which are divided into two inner beds and two outer bed feet.First of all, we make the inner bed feet, first saw two Square wood materials of 2.5*7cm in length of 26.5cm, and then insert one end into the middle of the two horizontal crotch under the bedside.swing.Then nail a 1.5cm wooden board on the lower end of the bed to play a role in a natural fixed inner bed.

Then start making the outer bed foot, and first saw the two 2.5*7cm Square wooden materials with two 28cm length, insert one end into the crotch gap of the bedside head, and then fix it with a screw.Finally, add a piece of wooden blocks on the outside of the outer bed (pictured). When used, hold the wooden block freely and start the folding bed.

3. Debugging the bed

After the frame of the folding bed is made, you can start adjusting the details, put the folding bed in the specified position, first adjust the four beds to open up and down, and whether the size of the placement position is appropriate.Let all activity components be opened freely, so that even children can put away or put down the folding bed without worrying about holding hands.

4. Laying the bedboard

The bedboard is paved with 1.5cm thick wooden boards. First, the remaining gap is paved with wooden boards. You can use wood screws or small iron nails to fix the crotch of the bed.The paved bedboard should be flat and tight. After paving the bedboard, it should be polished with coarse sandpaper. Of course, it is best to use a polishing machine, so that the efficiency will be improved a lot.

5. Complete

Of course, today's DIY folding bed is also suitable for many small units. It can be made more exquisitely in the production and selection of materials.In fact, as long as you are willing to move your brain, you can improve the spatial utilization rate.

In November 2024, the counterfeit behavior of down products was exposed, and the topics such as "70,000 down jackets contain 0%" and "inferior down products are charged with velvet.On November 26, the China Deep Industry Association issued the "Consumer Tips for down products" to respond to the fraud in the fake of down products.

In terms of the main points of the purchase method of down products, the China down Industry Association stated in the announcement that when buying down products, you must choose regular channels and avoid low -priced traps. The product name is clearly down jacket and down.Others such as feathers cotton and down cotton are not down products.

According to the announcement of the announcement, according to the price level of the raw material in 2024, the price of 90%white duck down with down clothing standards is about 420-550 yuan/kg, and the price of 95%white goose down with down bedding is about 1000-1400 yuan/kg, which is lower than the cost priceThe quality of the product is difficult to guarantee.

The China Plel Industry Association reminds that the winter down is generally filled with 800 grams to 1500 grams of down, and the inferior products that fill the wire or crushed hair in order to obtain a fluffy effect similar to genuine products, it requires a higher amount of filling."5-8" pounds, the difference is obvious.