How about the camel brand Climbing shoes

Since entering Taobao in April 2010, Camel Camel mountaineering shoes have created the number one in sales of Taobao men's shoes in a very short period of time.The camel Climbing shoes brand is also becoming more and more famous among donkey friends, but it is also a big tree, and a series of cottage shoes and brands have emerged on the Internet.

There are also disadvantages to buy camel mountaineering shoes, that is, the customer service is reflected too slowly, and it is better to be better, especially at the time of activities.In the 2012 Taobao Double 11 event, Camel Taobao customer service encountered huge challenges. Temporaryly transferred thousands of people to serve as temporary customer service and product packagers, but they were still too slow to complain.

The camel climbing shoe market is positioned in sports and leisure, not professional climbing.This can also be seen from its price level. It is relatively cost -effective. It takes a popular route. It is very suitable for urban sports and leisure to wear. It is also suitable for friends who are purchased for the first time. ThereforeMountaineering shoes can create one of the reasons for sales records in a short period of time.

Camel mountaineering shoes OK?

1. In terms of cost -effective, camel mountaineering shoes are still very good. After all, it is also a good brand, but there are more fakes on the Internet now. You should pay special attention when buying.Guarantee.

2. From the perspective of professional Climbing shoes, camel mountaineering shoes are not professional hiking shoes.Its positioning is sports leisure, not professional climbing. Professional climbing here refers to professional activities such as mountaineering enthusiasts and mountaineering teams. Of course, it is completely possible to wear him on the weekend.

3. So how can the camel Climbing shoes only be benevolent and wise, everyone should consider according to their actual situation.

Do you want to buy camel brand Climbing shoes?

1. If you are a friend who is initially involved in mountaineering shoes, you can consider buying camel mountaineering shoes.

2. If you are not demanding on Climbing shoes, you will not have professional mountaineering activities. You can consider buying camel mountaineering shoes.

3. If your main purpose is leisure and outdoor activities, you can also consider buying camel mountaineering shoes.

1. How to wash the sunscreen ice silk Sleeve cover

Ice silk Sleeve is a relatively common type of sunscreen Sleeve. This material can be washed. Generally, wash with water hands, and the cleaning method of ice silk Sleeve cover is:

1. Put the sunscreen ice Sleeve sleeve in the basin, pour the appropriate amount of neutral detergent, and soak the water for 10-15 minutes.

2, 15 minutes, gently rub the dirty place on the ice Sleeve sleeve with your hands.

3. After scrubbing, the ice Sleeve sleeve is relatively clean. Rinse with water twice with water, and then hang it on the hanger naturally, and dry it in the sun.

2. Can Ice silk sleeves be washed with a washing machine?

Ice silk sleeves can be reused. It is usually recommended to wash it by hand.

Under normal circumstances, it is not recommended to put it in the washing machine to wash it, mainly because the cuffs of the ice silk material are made relatively thin. If it is put in the washing machine, the Sleeve cover is in the process of rotation of the drum mechanical rotation.It is easy to entangle with other clothing, deformation and wrinkles, etc., affecting beauty.Therefore, it is better to wash it in hand. After all, the Sleeve is not large, and it is still fast.

3. precautions for cleaning the sunscreen sleeves

1. When cleaning the sunscreen Sleeve cover, do not use water with high temperature to avoid deformation of the Sleeve sleeve.

2. When cleaning the sunscreen Sleeve cover, you should use neutral detergents such as washing fluid to avoid the material of other acidic or alkaline detergents to damage the Sleeve cover.

3. After cleaning the Sleeve cover, put it in the sun or dry it in a cool place. Avoid wringing dry Sleeve covers with your hands to avoid the cuffs deformation and affecting beauty.

4. Put the sun in the sun after washing in the sun and the sun can play a good dried and sterilized effect, but it should be noted that the time to dry in the sun should not be too long, otherwise the sunscreen Sleeve sleeve is dry and heats it.The quality of its fabric will be affected, resulting in a great reduction in service life.

1. What are the differences between sports towels and ordinary towels

sports towels, as the name suggests, are special towels for sports. Aerobic exercise, Outdoor adventure, and travel are usually prepared for sports towels. They can be worn around the neck, tied to their hands or tied to their heads.Compared with ordinary towels, sports towels are optimized in terms of materials, specifications, and water absorption. The difference between the two is mainly reflected in:

1. Water absorption

The towels have a certain water absorption, but the water absorption of sports towels is much stronger than ordinary towels. This is mainly to make the material different. General towels are generally made of polyester or cotton, and sports towels usually use ultra -fine fibers., bamboo fiber and other materials, more water absorption.

2. breathability

Considering the comfort of wiping with a towel during exercise, the sports towels have higher requirements in terms of breathability; and ordinary towels are generally used to wash face and dry hair. The requirements for breathableness are not high enough.

3. Size

sports towels need to be in close contact with the sportsman's body when they are moving. It is necessary to ensure that it is not easy to slide and usually tied to the body, so the length of the sports towel is generally long; and ordinary towels should be easy to wash their faces and rub their hands, so the length is with the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length and the length are with the length.It will not be too long.

exercise is a healthy lifestyle, but due to the particularity of sports, sports towels will be easier to absorb sweat and breed bacteria than ordinary towels. Therefore, consumers need to buy good quality sports towels. So how to choose sports towels?

2. How to buy high -quality sports towels

The purchase of sports towels is similar to ordinary towels. Choose a towel with good water absorption and breathability. When choosing, you can use the following techniques to distinguish the quality of sports towels.

1. Hang up the sports towels and spray a small amount of water on the towel. If the water is quickly absorbed, it means that the water absorption of the towel is very good. If there is a water drop, it means that the water absorption is poor and it is not recommended to buy it.

2. Use a clean wet paper towel to scale a few times on the sports towel. If the towel is faded or there is obvious color on the wet paper towel, it indicates that the color of this sports towel is worse.

3. The material of sports towels is preferably cotton, ultra -fine fiber, bamboo fiber, wood fiber and other materials. It is a cotton yarn on the edge to see the black ashes left after burning.of.

4. Try to choose a sports towel with a brand guarantee. Some professional sports brands have sports towels. You can consider buying.

1. What is a Tent

The Tent is a new type of Outdoor activity originating in Europe for temporary buildings, also known as European tents, and is lightweight. It is called "mobile real estate".It is widely used in temporary warehouses, factory buildings, temporary construction, exhibit tents, tenthouses, and emergency disaster relief.The Tent is a new concept for the international masses. It is also gradually appearing in people's daily outdoor activities in recent years., Convenient storage, small volume and other characteristics.

2. What are the characteristics of a Tent

1. Flexible and convenient

It is easy to install and disassemble, and the venue is free to choose in different environments.

2. Safe and stable

Aluminum alloy framework, steel parts connection, PVC tunnel high -frequency welding, base fixation, and strong mechanical properties.

3. Complete service

Pre -sale, sales, and after -sales tracking service, the problem will be feeded and resolved as soon as possible.

4. Satisfied personality

It can be designed and produced according to demand, producing a Tent, elegant appearance, and providing corresponding supporting facilities (hardware walls, high partitions, top curtains, edges, flooring, furniture, lighting, air conditioning, mobile toilet, European fence)

5. Wide applicable

Commercial exhibitions, festivals celebrations, catering and entertainment, logistics and storage, Outdoor leisure, convenience municipalities, etc., all kinds of Outdoor temporary activities are useful.

What are the types of tents?

There are many styles of the Tent, which can be divided into three types according to different appearances:

1. A -shaped Tent

The A -shaped Tent is also known as an activity Tent, which is the most widely used, and it can be used from Outdoor business to large exhibitions.

2. Scoop Tent

The bottom surface is Square, and the top of the canopy is like a tower spire, with an elegant appearance.

3. Ballical Tort

The dome is called "the strongest space, the lightest, and the most effective design."With a rigid and stable architecture, you can temporarily suspend light and audio equipment to decorate and fill your activity space.

4. There is also a type of Tent mixed with the characteristics of A -shaped tents and scoop tents.

Fourth, how to do the Tent

1. Positioning the bottom plate of the column

First determine the flat ground at the installation site, then position the bottom plate to determine the position of the four bottom plates and then measure whether the distance between the diagonal line is equal.If you are not equal, you must re -adjust the position. Be sure to ensure that it is a rectangular rather than a parallel quasoplasty.After better, fix the column bottom plate in the corresponding four positions, and use the same method to better and fix the other bottom plates of the length direction.

2. Place a good part

Section A section A, angle node, diagonal beam A, and diagonal beam B (two -section oblique beams with more than 14 meters), oblique beam undertaking parts (connected to section A section A and oblique beam B, 14There are no components below the rice span), the top nodes are placed, and all components form a gables. Putting other gable surface components in the same principle is placed in the same principle. Note that it must be placed on the ground in one direction.

3. Connect the diagonal beam A/B section

Insert the oblique beam A section A into the oblique beam to undertake, and tie them into two screws (Note: the small hole will not be installed first)

4. Install top nodes

Connect the connected diagonal beam AB section with the top node, the screws tied into, and tighten.If it is the first gear, you must also install the wire flower cable, and install the buckle on the one -end of the flower cable without flower cable on the second hole in the section B section B.Use this method to install all the top nodes and oblique beam AB sections.

5. Install corner node

Insert the oblique of the corner node into the section A section A, connect the upper end of the column to the straight end of the corner node, and penetrate the screw and screw the nut.If the wire flower cable and the cross rod are installed, the hole is installed with a hole on the top of the corner node, and the hole is installed with the hole in the lower end of the corner node.In the same way, install other corner nodes.

6. Connect the column and the bottom plate

Put the lower plug -in holes on the column to the screws connected to the holes on the bottom plate and tighten the nut.The same method connects other columns and columns.Note that the entire installation process must be gently put in lightly, and it is necessary to use wood to pad the assembled gables. When moving aluminum materials, be sure to lift the entire frame to avoid aluminum and sand and other sand and other sand and other sands on the ground.Item friction causes the surface of the aluminum material.

7, vertical mountain wall

All personnel are divided into four teams, two people pull steel ropes, and two people stand at the corner nodes. Others stand at the apex, lift the gables up, and lift them to a certain height.Continue to lift up.People who pull the steel wire rope should also pull up the gables up.

When the entire gables are erected to 70 degrees, they must stop, and then slowly stand vertical with the ground. At this time, the person who pulls the steel wire rope stood a slightly stable on the top.At the same time, several people have to support the pillars.Two people install the flat iron end of the cross rod to the screw below the upper end of the column, and tighten the nut.Connect the other end of the cross rod to the bottom hole below the bottom plate of the adjacent second gables, penetrate the screw and tighten the nut.Pose a second gable in the same way and install two other cross rods.

8. Install beams and bars

The cross -section shape of the beam is house -shaped, and the cross -section shape of the strip is Square.The hooks of the beams or bars are ended up, and then the hook end is tilted to the U -shaped ears on the corner node or in the -shaped iron on the corner node.Use a ladder to slowly lift the straight hook end of the beam/bars and hang it into the ears of the gables or corner nodes on the side of the hook.Under normal circumstances, there are three beams between the two gables, namely one end of the two ends and one in the middle of the middle. The bars increase or decrease according to the size of the span.

9. installation

Connect the middle support to the small hole in section A in section A, insert the screw, and tighten the nut.After installing the middle support, hang the side beam into the corner node and the middle -supported Hanging ear.Note that when the side beam is Hanging, be sure to install it from the side of the side beam, first hang the side beam accessories into the Hanging ears in the corner node, and then slowly lift the straight hook end to install it to the middle support Hanging Hanging on the hook above the support.In the ear, remember not to install the straight hook end first, otherwise the installation is unsuccessful.Like the beams and bars, you must first install it from the hook end, and then hang the straight hook end.

10. Install the top

Put on the hemp rope at both ends of the top of the top, and the strap is in the Tent.Then stuff the tape on both sides of the top end of the cloth into the slot of the diagonal beam, and throw the other end of the hemp rope from the entire frame of the Tent, and then pull the four people to the hemp rope at the same time, so thatThe groove slowly pulled to the opposite side.Remember to pull it hard at the same time, otherwise the top will be stuck and causing pulling. To solve this problem, you only need to pull back the top back to a certain position and then pull it back again at the same time. Be sure to go forward at the same time.The same method is used to pull other top tops.

11. installation side triangle

Similar to the installation cloth top also needs to use hemp ropes, but when installing the side triangle, someone must stand to the side of the (high ladder) top node. The only difference is that the strap of the side triangle is outside.First put on the side triangle into the slot of the diagonal beam, and then the people standing in the middle pulled up to the hemp rope. At the same time, when standing at the corner node, the side triangle was lifted to lift the side triangle to let the rubber strip go up the groove.When installing the side triangle, be sure to pay attention to the left and right points, do not install it.After pulling the two side triangles, the middle seam Tube is slowly pierced from the lower end between the two side triangles (a section of the rubber strip is cut off slowly (the middle seam Tube has a flat iron inside).When you put it on the top node, hang the flat iron into the ears of the top node.

12. Install the curtain

Open the curtain, facing the front (there are ropes or covers on it), first put the rubber strip into the pillar to milling.Then slowly pull up the top, plug the codes into the gap in the beam milling slot. Pay attention to stuffing one by one in order.Put in down, pull the curtain to the middle, and place the side of the rope on the side of the tun ring, and connect the rope from top to bottom.

13. Install the top pressure rod

Put the top pressure rod into the crusher cover of the top of the cloth (that is, there is a double -layer Sleeve at the top of the top of the cloth, then put the end pressing iron in the press, and put the rectangular screw in the seamless pipe of the angle node.The last step is to plug the crusher of the surrounding curtain into the bottom of the rod at the bottom of the curtain to prevent the wind from blowing the curtain.

5. precautions for Outdoor exhibition canopy

1. Selection of the venue

We all know that today's Tent products do not have too high requirements for venue conditions. Generally, the flat ground can be easily built, as well as Outdoor exhibition tents.However, in order to hold the activity safely and orderly, we still need to investigate the environment of the surrounding venue before the Outdoor Tent was built, and prepare the solution in advance according to the actual situation, so as to ensure the normal construction of Outdoor exhibition tents!

2. Determine the size and measure the venue

After we confirm the conditions for building the site, we also need professional staff to carry professional tools to the venue for measurement.If the site conditions are found to be unfavorable, you need to adjust it in time, and finally determine the Tent specification plan and fixed method.

3. Verify the time of use

After confirming the above two points, we also need to confirm the time when we need to use a Tent.In this way, a canopy manufacturer can arrange production plans, stocking, transportation, and construction based on the actual situation.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. The tie of the fish hook

Fish hooks are commonly used tools for fishing. They are usually tied with fish lines. There are many ways to tie Fish hooks. The following introduces several commonly used fish hook hook methods:

1. Method 1: Wrap the line to the hook handle, and then slowly wrap it around, leave the head head and tighten them hard.

2. Method 2: Wrap the wires into two coils, then turn one of the coils below the hook handle, then put the other section of the coil above the handle, then tighten it, and then wrap the remaining thread around the line.Out of a coil, wear it out of it, and finally tighten it.

3. Method 3: First walk a section of a line onto the handle, pull the head end of the head to the head of the handle, then wrap the other line to the line, then tighten it, and then tie the end of the end.Essence

4. Method 4: First wrap a section of line under the hook handle, then slowly wrap it, put a end line head from the opposite circle, and then tighten the other line head from the circle.It's okay.

5. Method 5: First, the line of the line is wrapped into the head of the hook handle, so that the line forms a semicircle, then pulls a line head, and tighten it out of the circle to tighten it.

6. Method 6: You need to wrap the line to the hook handle, wrap it around at least one or two times, and then tighten it.

7. Method 7: First fix it with a ruler, wrap a section of line from the bottom of the hook, leave the line head to go out from the circle, and wear the other line head from the opposite circle.Remove it, and finally tightly tightly.

8. Method 8: First, slowly wrap a line on the head of the hook handle, and then select a line head to go out from the circle, and finally tighten it.

9. Method 9: Slowly wrap a section of line from the bottom of the hook handle, put one end line out of the circle, and then wear the other end line from the coil in the opposite direction, and finally tighten it.

10. Method 10: Wrap the line from the middle position of the distance to the hook to the hook, and then tighten it after wound, but leave a small coil, put a end line head into the coil, and finally tighten them hard to tighten it.It's right.

11. Method 11: Select a small section line, tie it to the hook handle, and then wrap the remaining lines onto the handle, all the wraps in the hook handle.

12. Method 12: Wrap a section of line onto the handle, then put the line head into the wrapped coil, and then tighten it.

13. Method 13: Select a section of line and start wrapped from the bottom of the hook, leaving a part of the line header tightened.

14. Method 14: First wrap a section of line into the hook handle, leave a part of the coil temporarily, and finally tighten it slowly.

2. What are the precautions for tie Fish hooks

1. When the hook is tied, there should be a certain line length, and each time the fish hook must be tied to a line head with the same length, so that the tie is very neat to ensure that the child line length is the same.

2. When tie the hook, you must gently walk around (five or six laps) when the hook handle is winding.

3. When tightly, slowly pull the head head, which can minimize wear.

4. This one is very important to avoid many broken line phenomena. When tightening the line, the front of the line is bypassed the hook handle, because the hook handle is tilted backwards.Causes the line.

5. When tied the hook, you should also pay attention to making the hook line on the inside of the hook handle. This is important, but it is easy to ignore. The tie line is on the inside of the hook handle to meet the requirements of the force.fish body; if the hook wire is on the outside of the hook handle, it is not only easy to decompose, but also when the hook hook is stressed, the end of the hook handle is also easy to wear the hook wire to cut the fishing line.