1. What pants are the pants

Many people know that it is a fashion item. So what kind of pants are pants?

In fact, pants refer to the pants with the fabric of the velvet hair under the bottom. It is a soft -fabric, which directly contacts the body's long trousers, suitable for spring and autumn.It will add velvet.Now the pants also refer to all sports trousers.

Second, what are the differences between guard and sports pants

Guardous pants and sports pants are very similar in appearance, and many people will mix it, but in fact they still have a certain difference. The difference between the pants and sports pants is mainly reflected in two aspects:

1. Different fabrics

The fabric used in the pants is cotton and polyester. The fabric is soft and comfortable but not flexible. It is very warm and warm.The fabrics used in sports pants are generally polyester, the fabric is elastic, the texture is thin, and it is suitable for spring and autumn.

2. Different version

The version of the trousers is loose, mainly comfortable and loose, thick and warm, especially suitable for autumn and winter seasons. The appearance is very casual and lively.The version of the sports pants is generally Slim, because it has the effect of sweating and drying, so it is very suitable for wearing during exercise.

3. Which of the sanitary pants or sports pants is good -looking

Guardous pants and sports pants are a single item for many people's wardrobes. Which of them is better to wear and look at each other and personal aesthetics.

Generally speaking, the main pants are the leisure, and the styles that can be matched with sweaters, T -shirts, Baseball uniforms, sweaters, etc. Pay attention to the color and style when matching;In most cases, they are paired with short -sleeved T -shirts.

Fourth, can defended pants be worn as a sports pants?

Can.

Guard pants are also called sports trousers. In the cold and winter season, you can wear guard pants for exercise, but it is not suitable for doing some more severe exercise. After all, the trousers are relatively loose; in addition, when the summer temperature is highIt is not recommended to wear trousers, otherwise it will be hot.

1. What is the principle of Fishing Net

The principle of Fishing Net fishing is to wrap the fish after the Fishing Net is sprinkled. Because the fish is a living animal and has the characteristics of group living, when the net is closed, there will be no fish to escape from the bottom of the net alone.As a result, the unable to escape the Fishing Net will eventually be captured.

There is also the edge of the Fishing Net covered with lead. After the net is sprinkled, it quickly sinks to the bottom of the water. When it is pulled up, slow down, and the pendant will gradually close with the bottom of the water.Then slowly mention it.The fish living on the net will not fall because the pendant gathers.

Second, what can be used in the Fishing Net to catch fish

In the process of fishing, there are many tools that can be used, and if the methods are taken different, the tools used are different.For example, the ground cage Fishing Net is an important Tool, and the use of this Tool to fish is also more common, and if you use this Tool, it is easy to catch a lot of fish, you can choose according to your own habits.At this time, there is also a bait in the substances that need to be prepared.

From the overall effect, the best bait is the fishy bait.Both live bait and dead bait are okay.Among the live bait, earthworms are the most important categories. It is called universal bait, so it can not only hang it on the fish hook, but also put it in a ground cage Fishing Net.Furthermore is dead bait, most of them are animal internal organs, chicken liver, chicken intestine, pork liver, etc. are all possible.If there is no fishy bait, some grains can also play a substitution, but from the effect, it is not as better as the fishy bait.

What are the types of fish lines and fishing ships in the type of fishing wheel

1. Types of fishing wheels

The fishing wheel is also called a fish wheel and wound wheel. It has the function of storage, closing lines, and launch. Its wheels are equipped with dragging equipment. It can be adjusted when fishing fish.There are many types of fishing ships, and there are several common fishing ships:

1. Flying and fishing Ship

What are the types of fish lines and fishing ships in the type of fishing wheel

Flying fishing wheels are single -axis fishing wheels. There are no automatic storage lines on the wheels. If the line is closed, it must shake the handle and shake it in a circle.This brings some difficulties to quickly close the line after fishing.However, this round is equipped with a drainage device, and the tone of the drainage is positive to control a knob to control.Before fishing, it is necessary to adjust according to the intensity of the fishing line. It is very difficult to adjust it after the fish is hooked.

2. Rotary fishing wheels

What are the types of fish lines and fishing ships in the type of fishing wheel

The rotary fishing Ship is also called a spinning fishing Ship, which is the most commonly used universal fishing wheel.It does not move the winding shaft, and uses the rotation of the rotating frame connected by the rolling shaft to wrap the fish wire around the line shaft.It has the characteristics of small qualification resistance, fast speed, difficulty in random lines, simple operation, wide range of use.There is a drainage device on this fishing Ship, which can adjust the resistance of the launch and play a buffer effect.When fishing, it can automatically release the line with the tension of the fish and adjust the line resistance without being pulled by the fish.

Depending on the positioning of the drain knob, the front drainage type and the rear draft force type are different. The former is located at the front end of the rolling line, and its structure is simple.But the resistance of the outline is not accurate enough.The latter is installed in the back of the wheel body, which can accurately adjust the output resistance, good performance, but the price is more expensive.

3. Closed fishing wheels

What are the types of fish lines and fishing ships in the type of fishing wheel

The structure of a closed fishing carrier is basically the same as the rotary fishing Ship.The difference is that there is a hood outside the winding wheels of the closed fishing wheel. The fish line passes through the holes in and out, and the fisherman's keys control the collection line.It has the characteristics of small size, light weight, and not easy to chaos.However, it has a small storage line, and it is not advisable to shot far and fish.

4. Drum -shaped fishing Ship

What are the types of fish lines and fishing ships in the type of fishing wheel

Also known as dual -bearing fishing Ship.Both the bearing of this wheel is equipped with bearings on both sides, and the shaft heart disk is fixed on both sides, similar to the drum shape, so it is called a drum -shaped fishing Ship.This fishing Ship is precise, durable, large, and excellent in performance. It is the best fishing set of deep -sea fishing and boat fishing.Generally, the fishing force of the drum -shaped fishing wheel is more than 20 kg, and the fishing force of large drum -shaped fishing wheels can reach 70 to 80 kg.The improved drum -shaped fishing wheels are equipped with electronic calculators, which can display the depth of water in the water, the length of the outline, the length of the wheel memory cable, and the signal reaction when the fish swallow hook.You can use the power supply on the boat when fishing. Drive the fishing wheel automatic line.The shortcomings of this fishing wheel are that the rotation speed of the fishing Ship during throwing is often faster than the outcomes. If it is not well mastered, the phenomenon of chaos will occur.Electromagnetic braking devices have been added to the current double -bearing fishing ships produced abroad to make up for their shortcomings.

Second, the connection method of fish line and fishing Ship

There are two ways to connect the fish wire and the fishing wheel. One is to cooperate with two people. One person holds the fishing wheel in one person, and the other person holds the line plate, tie the line set to the roller plate, and shake the handle.The line is wrapped on the roller plate.The other is: use a thread to install the thread.This method is simple and easy to operate.Put the fish wire on the wiring wire to load the line as long as the handle of the fishing wheel.

What are the types of fish lines and fishing ships in the type of fishing wheel

The connection method of fish line and fishing Ship

When installing the line, you should pay attention. Do nt install it too much, you should be slightly lower than the storage slot to avoid random lines.After the line is installed, the fishing wheel is installed on the pole, and it is fixed.Then adjust the drainage.The drainage size is generally adjusted according to the 50%one 60%size of the tensile of the fish line.If the fish wire is 4 kg, it can be hung online, one 2, 2, 2.5 kg. Under this weight, the rolling line is automatically put on the line, which is adjusted.If there is a spring scale to adjust the drainage, it is more accurate.After the adjustment, do not move again, but you need to do regular inspections.Types of Fishing rods & gt; & gt;

1. Is the inflatable mattress easy to leak air?

The inflatable mattress is made of PVC, which is very flexible. It is very suitable for making inflatable products. The air cushion bed produced by regular manufacturers is strong and durable.Leak.

2. What is going on slowly omitting the air -inflatable mattress?

The inflatable bed is easy to carry, and it can be used indoors and Outdoor. It is a very easy -to -use Mattress, but when many friends use an inflatable mattress, they will find that the inflatable mattress will slowly leak air. What is going on?

In fact, the reason why the inflatable mattress is leaked is mainly because of the wear of the product. After a long period of use, there will be some invisible air leaks. This is normal; if there is more leakage, you can replenish the gas again.

In addition, because the inflatable mattress is made of PVC, if it is pierced by sharp metal, or the high -temperature object is approaching, the inflatable mattress may be broken, causing air leakage.

3. How to make up the inflatable mattress leakage

If the inflatable mattress is broken or scated, it can be repaired by method:

1. Repair needle eye

The inflatable bed accidentally tied one or more small stitches by the abandon or wooden thorns. This situation is easier to repair:

(1) Put the bed and cover the breath to reduce the gas flow in the bed.

(2) Take out the glue in the repair package and drop a drop of glue on the needle eye.

(3) If the acupuncture eye is large, take a toothpick, use the toothpick to point the glue, apply it into the damaged needle eye, and then use the glue to fill the acupuncture mouth.

(4) Repairing, wait for four hours, then inflatable.

2. Repair or scald the mouth

If the inflatable mattress is cut or broken by a knife or was burned by fire, you can repair it in the following methods:

(1) Put the bed and cover the breath to reduce the gas flow in the bed.

(2) Find the patch material in the repair package and cut it.

(3) Apply the glue to the destruction, press the patch, and use the glue to stick the patch seam.

(4) Apply pressure to ensure that there are no gaps on the surface of the glue, and press it with Smooth and heavy objects.

(5) Wait eight hours and then inflatable to complete the repairs.

3. Velvet repair

(1) Carefully clean up and repair the area. After drying, take out the patch and cut it, cover it on the destruction surface, and allow a little more around.

(2) Apply a layer of glue on the patch and damaged surface, and stick the patch seams with glue to ensure a thorough seal.

(3) Press it with Smooth and heavy objects, and then inflatable after 24 hours.

If an inflatable mattress is damaged in large areas, it can be sent to the seller for repair within the manufacturer's repair range; if it exceeds the repair range, it can only be scrapped.

1. How to open the blade with speed skating knife shoes

The just -bought Ice knife shoes need to be used to use it. The ice knife is not open because the blade is blunt, and it cannot be eaten on the ice.There are generally three blade methods of Ice knife shoes:

1. Mechanical grinding

Motorcycles are processed by professional machines.

2. Semi -mechanical grinding

Use sand wheels to grind the blade. Due to the large wear, it is only suitable for rough grinding, and then manually polished.

3. Manual grind

The cost is low and the effect is good. People who have high requirements for skating quality are manually grinding by themselves.Speed skating knife shoe handmade grinding is generally flat grinding: fix the ice shoes on the grinding shelf, bring gloves, and carefully check whether the two knives are on the same plane.You can use the large sand wheels back and forth a few times to see if the grinding marks are uniform.After confirmation, use the large sand wheel (30cm diameter) to make the "8" shape, until the burrs appear on both sides of the blade, and the rough grinding is completed.Then use coarse oil stones to continue making "8" fonts until the grinding traces are particularly small. After removing the knife surface and the burrs on both sides with fine oil stones, a pair of shoes is worn.Remove the ice shoes and clean the surface dust and residue.

Second, Ice knife and shoes are standard

To what extent to open the blade of Ice knife and shoes is a question that many friends are more concerned about. In fact, the Ice knife shoes have no specific labeling. Generally, the thumb is dried up.There is a depression.

3. precautions for Ice knife shoes

1. If the blade requires a high blade, you can choose to grind the knife, but if you are not a professional ice skaters, it is not recommended to choose hand -grinding, because the degree of grinding when the knife is grinded is difficult to grasp, it is easy to put the ice knife knife.Follow.

2. In order to prevent the damage of the blade and reduce the service life of the ice knife, it is recommended that beginners and enthusiasts try to choose professional mechanical grinding when grinding the knife.

3. The skate -Ski knife is a fine work.

4. The knife of the ice shoes has two blades inside and outside. Before the ice knife, you must first see if the inside blade is as flat as the outer blade.

5. Beginners are afraid of falling, and often use the inside blade to contact the ice surface. After a long time, the inside blade is lighter than the outer blade. At this time, you must first use the flat wheel to make the inside blade generally high, and then use the grinding gap.The sand wheel grinds a gap between the inside and outside.

6. In order to ensure the flatness of the ice blade surface, the eyes must follow the ice knife closely to avoid wear.