How about LP knees

LP is an American professional sports protection brand and was founded in 1999.LP is one of the most professional sports medical brands in the world, and has been widely affirmed and designated by more than sixty countries.In addition to its own team, it has begun to integrate technology and majors from Germany, Japan, the United Kingdom, and Australia, and build a series of products with more protective medical effects.

1. LP647 knee padding

LP647 high -telescopic knee keeps warm, closely fits the Skin, wears, light, light, non -traceless and comfortable exercise, without stacking, no restraint, vertical groove knitting on the left and right sides to ensure that the protective gear can still fit the Skin when the knee is bent, high elasticity fit and fit togetherContinuous pressure can produce proper pressure to relieve joint discomfort.

2. LP788 knee padding

The LP788 is made into a stable knee pad according to demand to adjust the restraint according to demand, fit the knee curve, improve stability, convenient wearable, soft and round EVA hip pads, fix the effect of skeletal, reduce Bone discomfort, prevent excessive slide of hip bones, and prevent excessive slide of the hip slide., Help release stress, soothe the space of hip activity, reduce the discomfort caused by stress, single -piece staggered coverage design, greatly improving the degree of posture and flexibility of wearables.

3. LP733KM knee padding

The LP733km knee pads are made of breathable material, which can not produce sweat accumulation during sweating during exercise. The protection of Bone Bone will not cause exercise barriers to ensure the flexible outer imported instrument in the exercise.Side can bend the spring support to keep the knee stable and absorb impact force to slow down the knee joint.

[LP knee pads purchase & gt; & gt;]

How to put on a normal Tent

1. First choose the camp. After considering the wind direction and terrain, choose a flat land and lay the inner account of the Tent on the ground (usually the inner account, but there are also some to support the external account firstThe principle is the layer of the Tent), and the nail Bags, poles and other accessories wrapped with tents are put aside first.

2. Take out the folding Tent pole, turn it over, straighten each section, and connect into a long pole.

3. Put the long fiber rod into the barracks (also known as the pipe) of the Tent.There are a few rods to be worn at the same time.

4. Insert one of the fiber rod into the corporate cave or on the bottom of the Tent (some tents are used with a needle ring, each has its own benefits), and then to the other end (the corner), hold the rod in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent with one hand, hold the Tent with one hand, hold the Tent in one hand, hold the Tent with one hand, and hold the Tent in one hand.The bottom angle, slowly arched the rod, supported the Tent, and then inserted the rod into the corporate eyes or needle ring.

5. In the end, it is a foreign account, open the foreign account, and the internal account.

6. There are some ropes on the external account, which is used to strengthen the Tent. It can generally not be pulled without any wind. It is best to pull it up. It also uses the nails. Several ropes are pulled evenly.

Different types of Tent construction methods

1. Triangular Tent

(1) Put the Tent in the ground, flatten the ground and nail the ground along the bottom.

(2) Smash the two branches from the Tent, put it on the isolation Tube, and then put it into the crossbar.

(3) The Tent coat is covered and the pull of the jacket is stretched to stretch all the outside.

(4) Way the rainproof hood into the support of the rod, put it on the wind resistance line, and complete.

Note: There is a space between the inner and outer Tent of the triangular double Tent. This space should be maintained. Do not make the inner and outer layers "stick" together. This space can prevent rain and warmth.

2. Ding -shaped Tent

(1) Put the Tent to the ground, nail the four corners (some are hexagonal) ground nails.

(2) The two groups (the hexagonal dome is three groups) of the Pepper rods. If the rod is a loose part, you need to connect it according to the instructions group.

(3) Put the puff rod into the custard of the Tent, and insert one end of the two groups into the pores. The other end of the two sets of rods is stretched hard at the same time.

(4) Speaking of tents shaking and forming can be placed on the ground.A jacket or a small rain cover with a jacket is completed.

Tips for building tents

1. Try to set up tents on a hard and flat ground, and do not camp on the river bank and dry river bed.

2. The Tent is selected in the sandy land, grassland, or rocky land.

3. At least there must be grooves. Do not take it next to the streams and rivers. It will not be too cold at night.

4. The Tent surface is best to see the early morning sunshine from south or southeast. Try not to be on the ridge or mountain top.

5. The number of tents is counted before the Tent was built.

5. In order to prevent insects from entering, a circle of kerosene can be sprinkled around the Tent.

What are the precautions for taking a Tent?

1. The entrance of the Tent should be carried on the wind, and the Tent should stay away from the hillside with rolling stones.

2. To avoid the Tent flooded when it rains, a drainage ditch should be dug directly below the top of the Tent.

3. Press the four corners of the Tent.Keep air circulation in the Tent, and cook in the Tent to prevent fire.

4. Before going to bed in the evening, check whether all the flames are extinguished, and whether the Tent is fixed and strong.

5. The Tent should be built in order: First build a public Tent.First set up a cooking Tent at the downwind of the camp, build a stove, boil a pot of water, and then build a warehouse Tent and their respective Camping tents to store public equipment in order.When the Tent of the entire camp is built, the boiled water has been opened, and you can drink and start cooking immediately.

6. Build a wild toilet: Choose a little lower at the downwind of the camp and stay away from the river (at least 20 meters).It is best to dig a rectangular pit with a width of about 30 cm, about 50 cm long, and about half a meter deep, and put some stone and fir leaves.Surround plastic cloth or packaging box on three sides, fix it, and the opening side should be back.Prepare some sandy soils and a handle of iron and a cardboard.After the stool, use some sand to bury the excrement and sanitary paper, and cover the pits with a board to eliminate the odor.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How to choose a shoe that suits you

1. It is recommended to buy shoes from a physical store

Buying sneakers is not the same as buying clothes. It is a bit shorter and can be worn.If the sneakers are short, they are extremely uncomfortable to wear, and they will hurt their feet, and they will spend money to suffer.So everything is bought online. You can try it to see it in a physical store. There will be no inconsistent situation of buying.

2. Buy sneakers according to your own foot type

There are three types of people's feet, which are normal, flat -footed, and high bow foot types.Different foot shapes, the corresponding types of sneakers are also different.Therefore, when you go to the shoe store to buy sneakers, according to the salesperson's introduction, you can buy a suitable foot -shaped sneakers to dress comfortably.

3. Choose according to the exercise you often do

Different exercise, the required sneakers are also different.For example, people who like to run must choose light and breathable mesh sneakers, so that they are more comfortable and not so tired.Therefore, according to the sports items you usually love, you can choose what functional sneakers are.

4. Choose shoes Format

With the continuous progress of science and technology, sneakers have become more and more complete, and at the same time, it is becoming more and more refined.For sneakers, some friends prefer high -top sneakers and like its domineering, while some friends like low -top sneakers, and they like his dexterity.

5. Choose sneakers color

The color of choosing sneakers is also very important. For this, you must fully consider your own style of dress. You usually like the cold color or warm color. It is important to choose a pair of colors to control it.Of course, if you are a trendy man on the court, it doesn't matter, after all, it is popular now.

6. Select brand and price

First of all, when choosing a brand, it is important to choose a big brand on sneakers. Generally, the craftsmanship and technology of large brands are relatively advanced.But consider the price range you can bear. If you are playing frequently and have certain requirements for sneakers, then choose a pair of relatively expensive sneakers. If you play and exercise only for entertainment and exercise, then there is no need to spend too much too much spending too much.Money, choose a medium price.

2. How to choose the appropriate number of sneakers

First of all, you must choose the sneaker size according to the US size.Because only USA is the most accurate, not the eur we usually say.For example, you are EUR42.5 yards, that is, the most suitable US9 code, then your size is US9 yards.Generally CHN refers to the length of the feet, while JP and CM refer to the inner length of the shoes.

Generally speaking, we wear socks to play sports, so when choosing sneakers, it is recommended to choose a standard foot with 0.5 yards.Wide feet add 1 yard, wide -footed and back height add 1.5 yards.Slender feet are recommended to buy foreign shoes, because the shoes of foreign shoes are relatively narrow.

1. How much is the price of a fishing rod?

The fishing rod is a fishing rod used during Taiwan fishing. It is characterized by long sections, lighter, and thin diameter. For fishermen who love Taiwan fishing, it is necessary to buy a quality and work well.So how much is a fishing rod?

The price of the fishing rod is affected by many factors, which is generally more than 200 yuan, but the different prices such as materials, brands, and length are also very different:

1. Material: How much money does a table fishing depends on the material? For example, the fishing rod of glass fiber tables under the same conditions is definitely cheaper than the carbon fiber table fishing rod.The above carbon cloth) cheap.

2. brand: How much money does a Taiwan fishing rod depends on the brand? Among them, the brand's fishing rod is basically more than 200 yuan, while the miscellaneous table fishing rod may only be tens of yuan.

3. Level: How much money does the fishing rod depends on the length? The longer the length of the fishing rod on the same condition, the more expensive the price.The price of rice is about 699 yuan.

More fishing rod price reference & gt; & gt;

2. Is it necessary to buy expensive on the Taiwan fishing rod?

When buying a table fishing rod, many friends feel that the more expensive the fishing rod, the better, especially some novice friends, they will choose the expensive table fishing rod directly when they come up, but in fact it is unnecessary.

The less expensive of the table fishing rod is better, but it is suitable for the main. Different prices of Taiwan Fishing rods are mainly in terms of material, length, brand, etc. At actual use, some expensive Taiwan Fishing rods may not be as cheap as the cheap Taiwanese fishing rod.Suitable.Whether a fishing rod is easy to use depends on where fishing, what fishing, personal fishing habits, number of parameters of Fishing rods, etc., are not just known to just look at the price.

Many novices buy Fishing rods will also fall into the more expensive and better misunderstandings. In fact, for novices, the learning stage does not understand any feel, and it will not lift the rod.The fishing rod, so there is no need to buy expensive ones.

Of course, after being proficient, you can consider buying some expensive Table fishing rods. The materials and work are better. The fishing experience is relatively better, but the same is the more expensive and better. Pay attention to comprehensive consideration.

1. How long does the water droplet wheel use

The service life of water drops will be affected by various factors, including materials, manufacturing processes, brands and quality, use scenarios, and maintenance.Generally speaking, the service life of the water drop wheel is between 2 and 5 years, but it also depends on the specific usage and maintenance level.

2. How to maintain the Luya water drop wheel

The maintenance of Luya water drops mainly includes cleaning and lubrication. The following is a detailed step:

1. clean

First of all, cleaning the external frame of the water drop wheel, focusing on cleaning the wire regulations and twist sticks, wiped with alcohol cotton pads and cotton swabs. For the small gaps on the twist stick, you can use a toothpick to clean up.Secondly, clean up the inner side of the side cover, remove the rocker screws and nut fixed slices, remove the rocker arm, and clean the magnetic brake part of the side cover.Finally, clean the position of the wire cup and wash it with a small brush. If necessary, use a cotton swab or alcohol to clean the dirt in the line cup.

2. Lubrication

After the cleaning is completed, the lubrication is performed and injects the lubricating fat into the worm axis. If the dirt is severe, first spray the fuel to float the dirt, then wipe it with a clean cloth, and then apply the fat.

In addition, it is recommended to clean each time after each use, especially after the sea fishing, it should be washed with fresh water and dry it. Do not dry or expose it.For each small maintenance of each time, you do nt need to disassemble the wheels during maintenance. You can order a drop of oil directly at the bearing and apply the fat.