1. song Hongmei's breeding method

1. Soil

Pine red plums are not strict with soil, but it is best developed in minimide soil rich in humus, loose fat, and superior drainage.

2. humidity

Pine red plums are so humid and resistant to drought.Normally maintenance only needs to adhere to the soil wetness. Pay attention to drainage during the dry season to prevent soil watering.

3. Temperature

The pine red plum is so cool, humid, and sunny. The suitable development temperature is 18 C-25 C. In winter, it must be insisted on the temperature above -1 C.

4. Fertilization

During the growth period of Songhong Plum, apply a liquid fat Fertilizer every 1 to 2 months.

5. Light

song Hongmei is afraid of the low temperature and the sun, so in addition to summer, it must be placed in a shade or shade or a shade.In addition, in other seasons, the sun should be given enough.

Second, the precautions for breeding of song Hongmei

1. Pay attention to the number of water pour in winter, and stick to the soil slightly wet and dry. Do not be too moist.

2. Instant heat insulation in winter, which can be planted in small climate maintenance of the south side.

3. In terms of terrain selection, it is better to use high slopes and high -platform drainage and dredging gardens. Avoid high ground. It is best to choose indoor potted maintenance in the north winter.

4. When the soil is alkaline, it is improved by 5%sulfate solution, and the pH value is 6.5-7.0.

Third, the pruning method of pine plum

Trim in detail after flowering every year to achieve dwarfed tree crowns, maintain a beautiful tree -shaped shape, and can also promote the plant to germinate new flowering branches.When trimming, you need to pay attention. Except for some branches that affect the plant type, other branches should not be cut all, and half or three -quarters can be cut off.

1. Red Ruimu's water support method

1. After the autumn or early spring of the following year, cut the raw branches from the strong mother plant, and then 0.3 cm under the bud festival ~At 0.5 centimeters, cut the spike into a horseshoe -shaped cut, so that 2 to 3 buds can be kept at the upper part of the cuttings.After that, inserted water with water cups and placed in sufficient light.

2. Keep the cuttings of about 5 cm to 7 cm. Do not be too deep, and pay attention to change the water every 2 to 3 days to ensure the cleaning of the water quality.In this way, it can take root in about 30 days; if the water is changed, the water temperature can be increased and maintained at 20 C-25 C, and the rooting period can be greatly advanced.

3. Due to the internal differences between the individuals of the cuttings, the root of the cuttings is always different.To this end, when the new root root of the cuttings has extended 0.5 cm-1 cm, it is necessary to pick out the pot in time. Each pot can be planted with 3-5 plants to make it naturally cluster.scale.

Second, Red Ruimu's breeding method

1. Red Ruimu likes a warm growth environment and requires sufficient light.

2. Red Ruimu's requirements for temperature are relatively strict. The appropriate temperature for growth is between 22 C and 30 C. It can be cold -resistant, but in some places in the north, it will be frozen, which will cause death in severe cases.

3. Red Ruimu likes moist and fertile soil. Under the conditions of Smooth drainage and sufficient nutrients, growth will grow relatively quickly.

4. Some base Fertilizers should be applied before planting. After that, they must be picked up. They can apply rotten farmhouse Fertilizer or Organic fertilizer. They can also apply some compound Fertilizers according to their growth status.

5. Watering should be appropriate. According to the growth of Red Ruimu, you need to return green water in spring and seal frozen water in winter.Pay attention to drainage in the rainy season to avoid stagnant water and cause rotten roots.

6. During the growth process, Red Ruimu will have diseases such as leaf spots, powdery powder, and stem rot, as well as the harm of pests such as aphids, yellow thorn moths.Essence

3. When is it better to plant red Ruimu

Red Ruimu has the best living rate in spring and autumn, because Hong Ruimu likes the season with sufficient sunshine, and the sunshine in spring and autumn is not only sufficient, but also very gentle.The best survival rate for planting Red Ruimu in the season is the best.However, the specific planting season must also be determined according to the specific planting environment. For example, Red Ruimu can be planted in all seasons in the south, and try to avoid cold winter in the north.

1. The breeding method and precautions of the emperor flower

1. Soil The planting soil of the emperor flower requires good drainage performance, especially the seedlings.If the pot is tied, the seedlings are difficult to grow.The sandy soil is the most suitable for the growth of the emperor.In family breeding, Flower pots should also choose a slightly larger breathability pottery pot.

2. Temperature The temperature of the emperor's flowers is generally not less than 7 degrees Celsius, and the temperature in summer should be 27 degrees Celsius.Individual varieties can resist low temperature, and zero -degrees Celsius will not frostbite.

3. Light The emperor's flowers like the sun.It can be maintained at all sun.But in the summer, it needs to be cool and dry, and it needs to be appropriately shaded in the scorching sun.

4. Watering The emperor flower likes to dry the environment. Watering can be appropriate, and there is no need to keep the pot soil moist.However, pay attention to the adjustment of the humidity of the air to spray water mist around the plant.

5. Fertilization The emperor flowers are not very high in nutrients. Each Fertilizer can meet the growth requirements once each spring and autumn.

2. How to plant the emperor flowers

1. planting time First of all, you need to choose the appropriate time. The emperor's sowing time is more about the autumn October. At this time, the seeds are just picked, and the germination power is relatively strong.And at this time, the temperature and humidity are more suitable, and the seed germination rate can be increased after planting.

2. seed treatment The seeds of the emperor flowers are difficult to pick them. The petals need to be placed in the sun and dried, and then picked the mature seeds with their hands.After that, you can soak in warm water for 3 to 5 hours, and you can remove it and use high -lipid film for planting to avoid the breeding of bacteria.

3. Soil preparation The emperor flower likes to grow in the soil with strong breathability and good drainage, so you can choose to prepare humus soil and river sand according to a 1: 1 ratio.You can add an appropriate amount of rot bark and base Fertilizer to give the seeds enough nutrients, which will shorten the time for seed germination.

4. Sowing and maintenance Place the seeds of the emperor flower in the soil, covering 3 cm thick soil, and sowing about 3 seeds in a Flower pot.After the sowing is completed, watering is required. There is no need to water again during germination. When the emperor flowers grow out of the real leaves, you can water the second water and move into the astigmatism environment.

3. How to cut the emperor flowers

1. Choose the branches above the semi -wooden position of the emperor Hua Mother.

2. The matrix uses peat and perlite to mix with a volume ratio of 4: 6, adjust the pH value of 5.5 ~ 6.5, and the EC value is less than 0.5.

3. Immerse the cutting base of the cuttic acid solution of 1000 ppm, soak it for 15 minutes and air dry immediately.

4. The depth of cutting is 1/3 ~ 1/4 of the length of the cuttings.After cutting, manages according to conventional technology, and field transplant is transplanted after the seedlings are out of seedlings.

one.Method of signature trees

1. If the climate is appropriate, the signature tree is always green all year round, usually blooming in spring, usually open at night, and it may also open during the day.It is best not to be too low in winter temperature, otherwise it is likely to freeze to death.

2. Signature trees are suitable for breeding in an environment with sufficient light and warm and humid.However, when the sun is more poisonous in summer, it is necessary to cover it properly, otherwise the leaves may be sunburned; if it is maintained in the place where the light is insufficient, it will lead to long -term, the leaves may be yellow, and the distance between the leaves will become longer.

3. The signature tree is not very strict with the soil. It prefers moist soil, but to ensure that the soil has the characteristics of loose drainage and breathability. Generally, peat soil is matched with perlite and river sand. The proportion is 1: 1:1.

4. Regarding fertilization, like the Fertilizers of other flowers and trees, nitrogen fertilizer is the main.

5. Potted signature trees need to be reasonably trimmed to control the plant type.

2. Cultivation method of signature books

If you want to make the branches of the signature tree grow more quickly, you usually choose hydroponic methods to cultivate.Soak the bottom of its branches about two or three centimeters in the water, place it in a ventilated light transmission, maintain a certain air humidity and warm environment, and you can grow the root system in about a week.After developing the signature tree of potted plants, the root system will be particularly strong in one or two years. In the later period, pay attention to regularly changing pots.

3. precautions for the breeding of the signature tree

In the process of breeding, the signature tree is easily invaded by some diseases.

1. In harm, it is mainly due to the harm of the thrips. The new leaves of the signature tree are subject to the silkworms of the thrips. At the beginning of the disease, it can be controlled by 1500.

2. In the disease, it is mainly anthracnose.After the onset of the disease, the signature tree can be removed by the leaves of the disease, and then sprayed 800 times the fungus to clear the prevention and control, sprayed 3-4 times in a row, and once every 4-5 days.

The benefits of traditional Chinese medicine residue Fertilizer

Traditional Chinese medicine residue is rich in organic matter and inorganic substances. The Fertilizers such as nitrogen, phosphorus and potassium required for plant growth are rich, and the use of Chinese medicine residue can effectively improve the permeability of the soil, which has many benefits to the growth of plants.

How to make Chinese medicine residue Fertilizer Fertilizer

This is actually relatively simple. The point is fermentation. The easiest way is to mix the soil and then ferment. It is usually enough in summer for one month. Whether the fermentation is complete.It means that the fermentation is complete. The specific method of Fertilizer is as follows:

1. Find a utensil, spread a layer of dry soil at the bottom of the utensil, spread the Chinese medicine residue evenly, and lay a layer of soil on the surface of the pharmaceutical residue.

2. Then put a plastic bag on the utensils, put the utensils on the sunshine for a long place, and you can expose it.

3. If you still need to add a drug residue, open the plastic bag to continue the previous operation. In short, the surface must be covered with a layer of soil.

4. Generally, it is fermented in a month or two. You can use it when you use it.

PS: The method of medicine is not dead. The traditional Chinese medicine residue is mixed with the soil, and then it is also possible to install it in the bag. It is not necessary to use a Flower pot.There is no need to water, because the medicinal residue itself contains water.

Can Chinese medicine residue be cooked without soil?

It can be cooked without adding soil, but it is not easy to operate, and because of the large water content in the medicine residue, it is easy to mold. It is difficult to operate with simple pharmaceutical residues. Relatively speaking, adding soil is much more worry -free.

How long does it take for Chinese medicine residue to ferment?

This time is uncertain. It is usually 1-2 months in the summer. If it is time for other seasons, it may be a little bit.After all, the medicine residue is full of herbal plants and leaves and leaves. After rotten, it is actually a general rotten leaf soil (humus soil), so the longer the time, the better.

precautions for the use of traditional Chinese medicine residue Fertilizers

1. Not to be too much

The fermented Chinese medicine residue is generally used as the bottom Fertilizer to the bottom of the pot, or it is mixed directly into the pot soil. Of course, you need to pay attention to the dosage. The incident ratio should not exceed one -tenth. If too much, it will affect the growth of flowers and plants.

2. Do not use it directly

Most of the traditional Chinese medicine residues are the root stems and leaves of herbs. Although they are rich in nutrition, they cannot directly pour the traditional Chinese medicine residue into the flowerpot fertilization. Otherwise, it will easily lead to the phenomenon of rotten roots, which will eventually lead to plant death.