1. The breeding method compiled by King Kong

1. Breeding: In May and June of each year, cut from the branches of the mother plant, insert the head plant into the potted pot, and add a small amount of water to maintain the air drying.The chairman is rooted.It should not be carried out too much to prevent rotten roots of water storage.

2. Pour pouring: It should be poured into the basin in the spring situation. It is best to change the old soil when the pouring season should be replaced. We must also cut the rotten roots and plant the main stems.That's fine.

two,King Kongmaintenance method

1. Soil: Diamond compilation in soil with a loose soil layer and strong permeability will grow and develop very well.In the case of configuration of the soil, mixing the mud, cultivation soil, and small amount of scum in the river, so that the breathability working ability of soil will be better.

2. Sunshine: It loves the natural environment of growth and development of light source, and it is usually sufficient.If it is in summer, it should be raised in areas with weak light sources, and it hates being exposed to being exposed by inflammation, which will be more conducive to its growth and development.

3. Temperature: In a natural environment of 22-28 C, it will grow and develop stronger. It does not have a strong low temperature resistance working ability. Therefore, when the average temperature is less than 15 C, it should be moved to the room for maintenance.

4. Water: It is more drought tolerantWell, so do not have too much pouring.The soil should not be too dry during the maintenance period, and there must be a certain amount of water.Pay attention to drainage during the rainy season to prevent rotten roots of water deposit.

5. Rust: When the main stem is rust, the rusty dark spots on the leaves should be placed in a cool place, and the olezoliol and ammonium are used for spraying.

6. Pests and insect pests: If it is placed in an unnatural ventilation house for a long time, it is very easy to suffer from buds.We can use small soft hair brushes to rush the small bugs, and apply the trimmilin to kill the small bugs.

three,Breeding by King KongTaboo

1. King Kong has the effects of insecticidal and itching, which can treat Skin diseases and ringworm.It also has the effects of clearing heat and detoxifying, laxative, and swelling. It can treat gastrointestinalitis, unsoplastic stools, swelling and poisoning, abdominal distension and other diseases.The leaves and stems compiled by King Kong can be used as medicine, but when used, the Skin of the stem should be scraped off.When treating diseases, it is necessary to be poisoned first. It is best to have professional guidance to avoid unnecessary harm to the body.

2. Can you raise it at home: Although it can be cultivated at home, because it has toxic and side effects, it should not be raised at home as much as possible. If there are children at home, pay more attention.

1. The maintenance of winter coral potted plants

1. Conservation environment

winter coral has high requirements for soil during growth. When planting, it is mainly loose, fertile, organic, and organic sandy loam soil.To provide sufficient light time for winter corals.

2. Water Fertilizer management

When winter coral enters the period of slowing seedlings, it is necessary to water and keep the soil regularly, but the stagnation of water cannot be used, and the mixture of Organic fertilizer and potassium phosphate during pregnancy is needed to stop fertilizing during the flowering period while reducing it at the same time.The amount of watering is conducive to the strong growth of the later fruit.

3. Selection of Flower pots

Flower pots can be cultivated with mud pots, plastic pots, porcelain pots, and pottery pots.winter -sized winter coral can be planted in a basin of 14 to 16 cm pots.

Second, the breeding method of winter coral

1. Soil

The soil needs to be fertile, breathable and easy to drain.In addition, some base Fertilizers can be mixed in it, which is conducive to future growth.Pay attention to the size of the pot and choose according to the volume of the plant.

2. Temperature

winter coral likes warmth.Generally speaking, eighteen to 25 degrees is most suitable for it.In winter, cold and warmth should be kept cold and not less than five degrees to ensure safe winter.

3. Light

winter coral is more like light.Put in a bright place.Except for the strong light at noon in the summer, at other times, no Shading is needed.In the summer, in addition to Shading, it is necessary to ventilate.Otherwise, some pests are prone to occur.

4. Watering

winter coral requirements for moisture are relatively harsh.Because it is afraid of drought and waterlogging.Therefore, watering in moderation, keep the soil slightly moist, do not accumulate water.In the rainy season in the summer, waterlogging is still needed.

5, Fertilizer

winter coral has a demand for Fertilizer, but not too much.Generally, it can be used once every half a month, and liquid Fertilizer with lower concentration.Before flowering, some phosphorus Fertilizers need to be applied to promote flowering and subsequent results.The appropriate amount of phosphorus Fertilizer and Potassium fertilizer will help make the fruit look better.

Third, winter coral flowers are not resulting in three reasons.

1. Excessive watering, although it is wet, is not resistant to waterlogging.If the amount of watering is too much, it is easy to maintain normal growth. The number and amount of watering should be reduced, and the plants are ventilated and evaporated to water.

2. Lack of nutrients. If you want to bloom normally, you must replenish Fertilizer before flowering to make nutrients sufficient.

3. The flower is not pollinated. It is magnetic, and a cotton swab is used on each flower.

1. Method of breeding of leaf wood

1. Soil: The soil is fertile, humid, and well -drained soil.Potted plants can be mixed with 3 parts of garden soil, 1 part of the pile, 1 part of river sand, or 3 parts of rough peat, 3 parts of corrupt leaf soil, and 2 parts of sand as a matrix.

2. Sunshine: The range of leaf wood is wide to the light, but the sufficient sunlight is conducive to promoting its good growth and obtaining higher ornamental value.Therefore, in addition to proper shade in the summer strong light, the color of the blades in spring, autumn, and winter becomes more beautiful under the condition of open -air light.The leaf wood is not too shade. It is generally suitable for the strong astigmatism in the room, and the time should not exceed 2 to 3 weeks.If long -term lack of light or insufficient light, the leaf color will lack luster, and it is easy to fall into leaves.

3. Watering: The growth period of the leaf wood from May to October should be given enough water to spray water on the leaves and ground every day to maintain high air humidity and Smooth leaves.The amount of watering gradually reduces the amount of watering in the end of autumn and winter, but pay attention to spraying water on the leaves to keep the indoor air humid and proper ventilation.

4. Temperature: The leaf wood is hot and chills. In winter, the indoor safety and wintering temperature are 10-15 C. It is prone to dehydration when it is lower than 10 C, and water stains or discoloration will also appear on the branches.summer can adapt to high temperature above 30 C.

5. Fertilizer: Generally, leaf wood is generally applied to rotten liquid Fertilizer every 2 weeks.Do not have too much nitrogen fertilizer, otherwise the leaves will become green, dim, and not gorgeous.From late autumn to winter, less fertilization or not fertilizing, so as not to draw new shoots.

6. Prevention and treatment of diseases and insects: If the cultivation environment is high temperature and dry, leafwood is prone to harm of script insects, red spiders, aphids, red spiders and aphids can be sprayed with 1,000 times to prevent and control.If you have a smoke disease, scrub with water or spray a multi-bacterial spirit 500-1000 times liquid.

2. precautions for breeding and turning the leaves

1. Properly trim the growth rate of the leaf wood is relatively fast. Usually you need to prunites the leaf wood in time, otherwise it will affect the growth of the plant. Whenever the leaf wood grows strong, the long side branches will be properly trimmed and the yellowing will be yellowed.The cutting of the branches and leaves can reduce the consumption of soil nutrients and promote the growth of leaves.

2. Although the requirements of leafwood in winter are not high, the leaf wood is not cold -resistant, and it cannot grow at a temperature below 5 C.Temperature control is above 5 C, prompting leafwood to thrive.

Third, the method of breeding of leaf wood

Multi -cutting method of breeding and turning the leaf wood.

1. From April to May, the top -growing top -growing tender branches are selected as cuttings, and semi -wood branches with 2 to 3 knots are cut to retain a few leaves on the top.

2. Wash the incision, apply it with plant ash, and dry it with a slightly dry sand and the mixing of the plants and gray.

3. After insertion, use plastic film to keep it moist, put it in a cool place, and control the temperature between 24 C and 30 C. After about 3 weeks, you can take root.

4. After a month, you can move the seedlings. The cuttings of the old branches are not easy to take root.The cultivation management of leaf wood is simple. Except for one trimming and plastic surgery every spring, no other special management is required.The northern pot is out of the room in early May.

1. The breeding method of shrimp and flowers

1. Water fat maintenance

When breeding shrimp clothes, it must provide sufficient water and Fertilizer. Generally, watering once every 1 to 2 days to provide it with sufficient moist soil. In order to make it grow more vigorously, it must also grow 10 ~ 10 ~For 15 days, the thin liquid Fertilizer was applied for it, and leaf Fertilizer was applied once a week.

2. Suitable for light temperature

The warm shrimp and flowers that like warm and keep the environmental temperature it grows at 18-28 C, which can make it grow more vigorously. Do not put it for too long because of its shade resistance for too long, it will grow it will grow, and it will grow. It will grow. It will grow. It will grow.Bad, you need to accept sufficient light for about 5 to 6 hours.

3. Ventilation and frost

When breeding, we should also pay attention to maintaining the good ventilation of the growing environment of the shrimp coat, and avoid the stuffy environment to make it poorly grow.Do a good job of cold protection during frost, so as to avoid frostbite the shrimp and flowers at low temperature, stabilize the temperature above 10 C.

4. Pruning insect prevention

In the breeding methods and precautions of shrimp and flowers, it is necessary to top up and trim the branches for them in time, prompting it to germinate more branches that look more lush.It is also necessary to spray the pesticides of the diseased insects such as the killing red spiders and the garaphs on a regular basis so that it can grow healthily.

2. precautions for shrimp and flower breeding

1. Change the pot in early spring

Every year, the breeding shrimp and flowers are needed to change the pots for potting, and more choices in early spring.Take it out of the basin, trim the roots, and cut off its branches and leaves. Only 2/3 can be kept, and then re -planting and maintenance to make it better grow.

2. Cooling treatment

Pay attention to watering in summer to create a good environmental climate. When watering, you can pay attention to spraying water on the ground surface, plants, and pots of pots. Special spraying of water fog on the plant can make the plant branches and leaves more fresh and brilliant, and increase ornamental.Effect.Water spraying can increase the humidity of small -range air, and also reduce the temperature, which is conducive to the growth and blooming of potted shrimp and flowers.

Third, the cultivation method of shrimp and flowers

1. Potted method

Potted soil is used in 4 parts of corruption, 3 parts of the garden, and 1 rotten Organic fertilizer. The sand soil and fresh sawdown each account for 1 copy.

Then put some animal hoofs and crushed Bone blocks on the bottom of the basin as the bottom Fertilizer.

Potted shrimps should be fully accepted in spring and autumn. If the plant is too shaded and the light is insufficient, it is easy to make the stems and leaves long, which not only affects the beautiful plant shape, but also affects the quality and quantity of flowering.

2. Cutting method

As long as the temperature is appropriate, it can be inserted in all seasons, but it is mainly in spring and summer.If you cut in summer, you should pay attention to the shade and moisturizing.

Cut the ears of the two to 3 sections of the year as spikes.The old branches or tender branches can be cut. Under the same temperature conditions, the tender branches are rooted quickly.

Put the base 1 section into the plain sand soil, the room temperature is 20 C, take root for about 10 days, and bloom the following year.

Yellow sand, vermiculite, or perlite can be used as cuttings matrix. Cuttings should be strictly disinfected with matrix.

After the cuttings are rooted, the pot is transplanted in time and shaded properly. After the new leaves grow, move it to the sunny place.

1. The breeding method of chrysanthemum peach

1. Environment

Chrysanthemum peaches are full of sunlight and good ventilation.

2. Soil

Chrysanthemum peaches are suitable for loose and fertile neutral soils with good drainage or slightly acidic soil. The Flower pots can choose large points to keep the chrysanthemum peach root stretching.

3, sunlight

Chrysanthemum peaches like sufficient sunlight. The ground planting is sufficient. The potted plants are placed in bright sunlight outdoors. In the summer, it can not be covered without light, so as not to make the flowers small and scarce due to insufficient light.In the winter, the potting outdoors are shown out of the sun or moved into the room to overwinter.

4. Watering

As soon as the chrysanthemum peach stopped fertilizing, controlling watering, and avoiding the pumping of buds in autumn, the new branches of the year were lone.Pay attention to drainage during the rainy season or rainy days, and control watering in an appropriate amount to see dry and watering, avoid rotten roots caused by the accumulation of soil, leave leaves lightly, affect growth, and heavy plants die.

Second, the maintenance skills of chrysanthemum peaches

1. Fertilization

Chrysanthemum peaches have three Fertilizers a year. Before flowering, phosphorus and Potassium fertilizer can be promoted to make the flowers great; after flowering, nitrogen fertilizer is mainly based on the leaves and leaves;It is conducive to sending more flower buds to bloom and bloom in the coming year.

2. Pruning

The chrysanthemum peach cut off the dead branches and random branches before flowering, so that the shape of the plant in the most beautiful state was in the most beautiful state.Tour again after flowering, and keep the blooming branches of 2 to 3 buds, which is conducive to sending new flowering branches.The growing branches can be topped in summer to control the growth and send more flower buds.

3, pot change

Change the basin once a year.Put some rotten cake Fertilizer and Bone powder as base Fertilizer when planting.

How to breed chrysanthemum peaches

1. Chrysanthemum peaches can be used as rootstocks with peaches, peaches or apricot seedlings for the year, and bud in summer.

2. The scion should use the branches of the newborn of the year, choose the buds of the newborn branches, the branches and leaves, the buds are full, and the buds are full.

3. Chrysanthemum peaches can also be breed in spring.