How to raise Ji Pineapple

1. Suitable temperature

Ji Pineapple is a very beautiful plant. It has a good strength within a suitable temperature, so the temperature is best to keep about 20-30 degrees Celsius.

2. sunlight irradiation

Sunshine is a maintenance factor that cannot be lacking. It is usually raised in the sun. When it is maintained indoors, it can be raised on the balcony, or it can be raised beside the window facing south.The light in summer is particularly strong, and the sun should be blocked in time to keep it in a cool place.

3. Suitable for potting soil

Most of them are potted plants at home. Choose Flower pots with moderate size and drainage pores at the bottom.The soil must also be prepared in advance, and it can be mixed with corruption soil, cubes ash, river sand, and garden soil.It is necessary to change the pot for one or two years, and the plants can be divided into plants while changing the basin.

4. Water Fertilizer management

When maintaining the pineapple, it can be watered regularly. When watering, pour it from the edge of the Flower pot.The requirements of Ji Pineapple have high requirements for Fertilizer and water. During the growth period, we must apply fat and diligence.

5. Keep humidity

Ji Pineapple has high requirements for air humidity in the growth environment. It needs to be maintained by more than 65%. In addition to ensuring normal roots watering, water spraying water to improve humidity.

6. precautions

Pests and pests need to be controlled in a timely manner, usually like medium -sized diseases and gray mold.Special pesticides can be sprayed. After diluted, it is better to avoid burn plants. It can be applied every half a month and can be applied every half a month, about 3 times.

What should I do if the pineapple leaves are discolored

1. The original leaves of Ji Pineapple were purple -red. It turned green because of the lack of sunlight. Plants could not perform photosynthetic effects, lack of chlorophyll and chlorophyll, so the color gradually changed.If the place where the room is too dark, the markings on the leaves will gradually disappear, the leaf color will become dim, and the value of ornamental will be lost.

2. In addition, too strong direct light will cause the leaves to be burned, and the leaves will appear on the leaves.

3. The pineapple is not cold, so the lower the temperature in winter, the darker the leaf color of the Ji Pineapple.

4. The dry leaves are dry because the air humidity in summer is low, the evaporation is relatively large, and the leaves are prone to water, which causes the leaf tip to dry.

Does Ji Pineapple Blossom

Ji Pineapple blooms.Its flowers are usually gathered, inflorescences, and flower heads are conical, stick -shaped or umbrella -shaped.Because the growth rate of this plant is slow, if it is sowing and breeding, it often needs 3-4 years to bloom.However, it is not only a flowering plant, but also a leaf -seeing plant. The leaves have patterns on the leaves, which look very beautiful.

1. song Hongmei's breeding method

1. Soil

Pine red plums are not strict with soil, but it is best developed in minimide soil rich in humus, loose fat, and superior drainage.

2. humidity

Pine red plums are so humid and resistant to drought.Normally maintenance only needs to adhere to the soil wetness. Pay attention to drainage during the dry season to prevent soil watering.

3. Temperature

The pine red plum is so cool, humid, and sunny. The suitable development temperature is 18 C-25 C. In winter, it must be insisted on the temperature above -1 C.

4. Fertilization

During the growth period of Songhong Plum, apply a liquid fat Fertilizer every 1 to 2 months.

5. Light

song Hongmei is afraid of the low temperature and the sun, so in addition to summer, it must be placed in a shade or shade or a shade.In addition, in other seasons, the sun should be given enough.

Second, the precautions for breeding of song Hongmei

1. Pay attention to the number of water pour in winter, and stick to the soil slightly wet and dry. Do not be too moist.

2. Instant heat insulation in winter, which can be planted in small climate maintenance of the south side.

3. In terms of terrain selection, it is better to use high slopes and high -platform drainage and dredging gardens. Avoid high ground. It is best to choose indoor potted maintenance in the north winter.

4. When the soil is alkaline, it is improved by 5%sulfate solution, and the pH value is 6.5-7.0.

Third, the pruning method of pine plum

Trim in detail after flowering every year to achieve dwarfed tree crowns, maintain a beautiful tree -shaped shape, and can also promote the plant to germinate new flowering branches.When trimming, you need to pay attention. Except for some branches that affect the plant type, other branches should not be cut all, and half or three -quarters can be cut off.

1. Red Ruimu's water support method

1. After the autumn or early spring of the following year, cut the raw branches from the strong mother plant, and then 0.3 cm under the bud festival ~At 0.5 centimeters, cut the spike into a horseshoe -shaped cut, so that 2 to 3 buds can be kept at the upper part of the cuttings.After that, inserted water with water cups and placed in sufficient light.

2. Keep the cuttings of about 5 cm to 7 cm. Do not be too deep, and pay attention to change the water every 2 to 3 days to ensure the cleaning of the water quality.In this way, it can take root in about 30 days; if the water is changed, the water temperature can be increased and maintained at 20 C-25 C, and the rooting period can be greatly advanced.

3. Due to the internal differences between the individuals of the cuttings, the root of the cuttings is always different.To this end, when the new root root of the cuttings has extended 0.5 cm-1 cm, it is necessary to pick out the pot in time. Each pot can be planted with 3-5 plants to make it naturally cluster.scale.

Second, Red Ruimu's breeding method

1. Red Ruimu likes a warm growth environment and requires sufficient light.

2. Red Ruimu's requirements for temperature are relatively strict. The appropriate temperature for growth is between 22 C and 30 C. It can be cold -resistant, but in some places in the north, it will be frozen, which will cause death in severe cases.

3. Red Ruimu likes moist and fertile soil. Under the conditions of Smooth drainage and sufficient nutrients, growth will grow relatively quickly.

4. Some base Fertilizers should be applied before planting. After that, they must be picked up. They can apply rotten farmhouse Fertilizer or Organic fertilizer. They can also apply some compound Fertilizers according to their growth status.

5. Watering should be appropriate. According to the growth of Red Ruimu, you need to return green water in spring and seal frozen water in winter.Pay attention to drainage in the rainy season to avoid stagnant water and cause rotten roots.

6. During the growth process, Red Ruimu will have diseases such as leaf spots, powdery powder, and stem rot, as well as the harm of pests such as aphids, yellow thorn moths.Essence

3. When is it better to plant red Ruimu

Red Ruimu has the best living rate in spring and autumn, because Hong Ruimu likes the season with sufficient sunshine, and the sunshine in spring and autumn is not only sufficient, but also very gentle.The best survival rate for planting Red Ruimu in the season is the best.However, the specific planting season must also be determined according to the specific planting environment. For example, Red Ruimu can be planted in all seasons in the south, and try to avoid cold winter in the north.

The usage and differences of various models of Huaduo

1 , Hua Duoduo 1 Number 20 20 20 GM;

2 , Hua Duoduo 2 Number 10 30 20 2mgo Blossoming and promoting flowers;

3 , Hua Duoduo 3 Number 15 20 25 Chrysanthemum and Yipinhong dedicated;

4 , Hua Duoduo 10 Number 30 10 10 Zhuang Miao (fast growth period) or Fertilizer in summer;

5 , Hua Duoduo 8 Number 20 10 20PL In winter, use yin -lived plants to cultivate soilless cultivation;

6 , Hua Duoduo 9 Number 20 10 20 For boron -raid boron -raid plants such as boron -free pear palm;

7 , Hua Duoduo 11 Number 5 11 26 5mg0 4s Aquatic plants (such as lotus, not hydroponic) orchids;

8 , Hua Duoduo 12 Number 15 10 30 Potted plants, potassium -proof loss, dedicated to prevent deficiency in the disease;

9 , Hua Duoduo 13 Number 15 0 15 15CA0 Special -for -seedlings or cloudy days (anti -long -term);

10 , Hua Duoduo 15 Number 9 45 15 Rooting roots and flower bud differentiation (follow 2 The number ratio is especially suitable for the flowers of flowers like osmanthus);

11 , Hua Duoduo 20 Number twenty one 7 7 13S Cuckoo Luo Han song and other like -like plants, most of the leaves are available;

12 , Hua Duoduo twenty two Number 20 30 10 Rose roses for roses;

13 , Hua Duoduo twenty three Number 15 5 15 5CA0 2mg0 The results of the results or soft water are dedicated;

14 , Hua Duoduo 36 Number sTEM No nitrogen, phosphorus and potassium micro -Fertilizer is used for the need for trace elements of Lanke Ball Root Moobee Plants.

A lot of flowers 1 Number and 2 Difference

1 Different properties

A lot of flowers1 The number belongs to a balanced Fertilizer, which can provide nutrients to the plants balance; 2 The number is a Fertilizer that promotes flowering, which can promote the prosperity and growth.

2 Different composition ratio

A lot of flowers1 The proportion of nitrogen, phosphorus, phosphorus and potassium in the number is 20 The 20 The 20 ; 2 The proportion of nitrogen, phosphorus, phosphorus and potassium in the number is 10 The 30 The 20 Essence

3 Different period of use

A lot of flowers1 The number is mainly used in the growth period of plants, which can promote the growth of plants; 2 The number is mainly used before and after the flowering period. It can be used from the budding period of flowers to the period of fading of flowers. It can provide nutrients for flowering, thereby increasing the amount of flowering and promoting the flowers of flowers and bright flowers.

A lot of flowers 1 Number and 2 How to use

1 , Hua Duoduo 1 Number and 2 When the number of Fertilizers is used, you need to prepare a small spoon that comes with the Fertilizer in advance, and use a small spoon to take 1 The gram of the flower has a lot of Fertilizers, and then dissolved to 500-1000 The water is fully poured evenly to promote dissolving into the water.

2 After making a Fertilizer solution, you can spray it on the leaves or pour the roots.

3 , Duoduo is using 1 Number and 2 When the number of Fertilizers, be sure to pay attention to the good concentration to avoid too high concentration, so as to burn plants.

1. The breeding method and precautions of the emperor flower

1. Soil The planting soil of the emperor flower requires good drainage performance, especially the seedlings.If the pot is tied, the seedlings are difficult to grow.The sandy soil is the most suitable for the growth of the emperor.In family breeding, Flower pots should also choose a slightly larger breathability pottery pot.

2. Temperature The temperature of the emperor's flowers is generally not less than 7 degrees Celsius, and the temperature in summer should be 27 degrees Celsius.Individual varieties can resist low temperature, and zero -degrees Celsius will not frostbite.

3. Light The emperor's flowers like the sun.It can be maintained at all sun.But in the summer, it needs to be cool and dry, and it needs to be appropriately shaded in the scorching sun.

4. Watering The emperor flower likes to dry the environment. Watering can be appropriate, and there is no need to keep the pot soil moist.However, pay attention to the adjustment of the humidity of the air to spray water mist around the plant.

5. Fertilization The emperor flowers are not very high in nutrients. Each Fertilizer can meet the growth requirements once each spring and autumn.

2. How to plant the emperor flowers

1. planting time First of all, you need to choose the appropriate time. The emperor's sowing time is more about the autumn October. At this time, the seeds are just picked, and the germination power is relatively strong.And at this time, the temperature and humidity are more suitable, and the seed germination rate can be increased after planting.

2. seed treatment The seeds of the emperor flowers are difficult to pick them. The petals need to be placed in the sun and dried, and then picked the mature seeds with their hands.After that, you can soak in warm water for 3 to 5 hours, and you can remove it and use high -lipid film for planting to avoid the breeding of bacteria.

3. Soil preparation The emperor flower likes to grow in the soil with strong breathability and good drainage, so you can choose to prepare humus soil and river sand according to a 1: 1 ratio.You can add an appropriate amount of rot bark and base Fertilizer to give the seeds enough nutrients, which will shorten the time for seed germination.

4. Sowing and maintenance Place the seeds of the emperor flower in the soil, covering 3 cm thick soil, and sowing about 3 seeds in a Flower pot.After the sowing is completed, watering is required. There is no need to water again during germination. When the emperor flowers grow out of the real leaves, you can water the second water and move into the astigmatism environment.

3. How to cut the emperor flowers

1. Choose the branches above the semi -wooden position of the emperor Hua Mother.

2. The matrix uses peat and perlite to mix with a volume ratio of 4: 6, adjust the pH value of 5.5 ~ 6.5, and the EC value is less than 0.5.

3. Immerse the cutting base of the cuttic acid solution of 1000 ppm, soak it for 15 minutes and air dry immediately.

4. The depth of cutting is 1/3 ~ 1/4 of the length of the cuttings.After cutting, manages according to conventional technology, and field transplant is transplanted after the seedlings are out of seedlings.