1. How to repair electric scissors

Electric scissors are driven by electricity. If it is not used properly or used to cut inappropriate things during use, it is easy to fail. Don't worry.sales of the situation.Of course, if you don't know how to repair electric scissors, it is recommended to let professionals repair it.Common causes and maintenance methods of electric scissors are:

1. The battery cannot be charged normally. It may be because the battery does not match or the charger does not match or voltage. First check whether the battery charger is a charger attached to the product, and then pay attention to whether the charging voltage is consistent with the voltage on the nameplate. IfIf you have any problems, replace the charger or adjust the voltage in time.

2. When you accidentally put the non -cut object in the incision, the sword will be closed and cannot be operated. At this time, you should immediately release the trigger, and the blade will automatically return to the open state.

3. When the branches of cutting are strong, the swords are closed like the above situation. The solution is to release the trigger.

4. If the operation is not caused by the operation, the battery is sprayed with liquid. At this time, pay attention to turn off the switch in time, and be careful not to get the liquid. If it is accidentally stained with the liquid, it should be cleaned immediately with water. In severe cases, you need to seek medical treatment.

two,How to maintain maintenanceElectric scissors

Electric scissors are more convenient to use, but if you do nt do daily maintenance, if you do nt perform regular maintenance, it will be damaged or causing a reduced service life. The maintenance and maintenance method of electric scissors is:

1. Before each charging, let the electric scissors pass and power, and the trigger will be dried for about 50 times, so that it will practice working normally for about 5 minutes.

2. After the electric branches and scissors are used, be sure to scrub the blade and fuselage with alcohol to remove wood shattered and other dirt.

3. When not using electric scissors for a long time, be sure to pay attention to the maintenance of the battery. It must be charged once a month to avoid the battery life.

4. Put the electric pruning and battery in a cool place during storage. The temperature is not higher than 30 degrees Celsius to avoid sun exposure.

5. Do not put the electric scissors battery in scissors for a long time. Because the time is too long, it will cause the battery to soften and flow out of harmful substances. Therefore, it is best to remove the battery alone when not in use.

1. How to grind branches and cuts sharply

The first thing to be reminded is that the new scissors have been opened, no need to grind the blade.The maintenance of branches and cutting flat is mainly for the trimming of cutting blades. For small -sized blades, you can use thin things such as diamonds (around 300 to 400) or general grinding stones (around 150).The blade is long -lasting and sharp.Please note that the auxiliary blade on the back of the small blade must also be sorted and grounded accordingly.But another arc -shaped blade surface only needs to be grinded gently.

After grinding the knife, you can use a soft thing (things that can be cut without strength) first.If you use thin cloth gauze, cotton and other things to test the effect after the blade.In order to correct it until you can cut these soft things cleanly and then, then trim the branches.

Normal scissors will only use a small blade with a 20 -degree blade with a width of 0.2 mm to 0.3 mm.After the damaged blade is re -polished, the width and angle of the small blade may change, and the sharpness will change.If this kind of grinding operation is an experienced person, you can try a few times with a small method.It is best to ask someone who knows some technology to operate.Please note that the blade is sharp, and the risk of injury needs to be avoided.

2. How to maintain Gardening

1. The problem of polishing and maintenance: Use Gardening to cut the blade often, keep sharp, and put it in a special cloth bag or toolbox to save it for next use.

2. cleaning problem: For the cleaning problem of scissors, it is mainly to remove filth.The sapped liquid attached to the shear should be cleaned in time. The cleaning agent of dirt is available on the market. You can also use hot water to clean it directly a toothbrush and other tools in hot water at about 80 C.Essence

3. To prevent rust::After cleaning the Gardening, wipe or dry the water in the Gardening artisia, and then put it away. The Gardening of the chemicals should be cleaned thoroughly to avoid corrosive metal components.Because the enemy of the steel is "rust".Although ARS's tools have been treated hard chrome -plated or specially plated on the basis of high -carbon steel, this is not all. After the erosion of resin liquid dirt water, there will still be rust.Therefore, be sure to pay attention to cleaning and maintaining full dryness in time.The heavy part of the blade is prone to residue moisture, so pay special attention.

In addition, after the scissors are dry, apply the blade anti -rust oil (mechanical oil, sewing machine oil, etc.) to apply a thin layer to keep the child's hand that is not enough to keep the child. Pay attention to avoid direct sunlight.

It is understood that a high -quality scissors can cut 500,000 to 1 million times in normal times. As long as it is properly used, it should be trimmed 500,000 times.But can it be trimmed to 1 million times or more? It really depends on the user's own habits, especially the daily maintenance and custody, so please also pay attention to itGardeningThe daily maintenance and storage of the knife.

1. Can branches and scissors bring the train?

Do not take pruning and scissors by train.Because the scissors of the branches belong to the items prohibited by the train,But it can be checked.

According to the railway, "Railway inbringing the station for prohibition and restrictions on carrying items", please do not bring the following appliances:

1. Dagger, triangular knife (including triangular scraper for mechanical processing), spring knife with a self -locking device, and other similar single blades, double -edged knife and other control tools.

2. In addition to controlling tools, kitchen knives, dietary knives, slaughtering knives, axes, scissors and other weapons, scissors, tearr, tear guns, electric shock guns, firing guns, defense, defense, defenseOther appliances such as instruments, bows, crossbow.

Can you bring the high -speed rail with pruning pruning?

The high -speed rail cannot be cut with branches, and pruning is pruning belonging to items.Railway Corporation's regulations for prohibited items are as follows:

1. The state prohibits or restrict transportation.

2. Dangerous goods, ammunition, and carrier that are stipulated in laws, regulations, and regulations cannot judge the nature of chemical products.

3. animals that hinder public hygiene (including odor and other odors).

4. Items that can damage or pollute vehicles.

5. Specifications or weights exceeding the specified items.

1. There are several types of Gardening branches

1. Ordinary pruning trimming

Ordinary branches are generally cut off 3 cm, as long as they can be included in the cut mouth, they can be cut off.During the operation, hold the scissors with your right hand, and push the thick branches in the direction of the scissors with your left hand, and you can solve it. Do not twist the scissors left and right, otherwise it will affect the normal use.

2. Long branny pruning

The long -cut cutting scissors is crescent, the handle is long, and the branches within 1 cm can be trimmed briskly, which is suitable for the trimming of the shrub bush.

3. High branch cut

The branches are cut with a long -handed aluminum alloy long handle. When used, it can be adjusted according to the height of the trimming to cut the fine branches at the cut.

4. Daiping scissors

Dacian shear is also called hedge shear and long -blade shear. It is suitable for the trimming of hedges, spherical trees and shapes of seedlings. Its strip blades are very long, and the blade is very thin.The shoot.

2. How to buy pruning pruning

1. Select the scissors of the big brand.

If you want to buy a high -quality pruning pruning, when choosing pruning pruning, it is best to choose the branches of the big brands. Many branches of pruning manufacturers of many big brands. The production technology is relatively mature, quality and technologyThe follow -up of follow -up is relatively fast. If it is a professional gardener, you must choose the branches of the big brands. The branches of the big brand are very guaranteed whether it is workmanship or quality.These big brands have a longer life before repairing, and they are more handy to use.

2. Select the length of the corresponding scissors blade.

If you want to buy a high -quality pruning pruning, when you choose to repair, choose the length of the corresponding scissors blade.If you often repair those particularly rough branches, buy a little pruning of the blade mouth, otherwise, you can buy the short pruning and pruning of the blade mouth.

3. Is it convenient and comfortable to use locks?

If you want to buy a high -quality pruning pruning, when choosing pruning pruning, you must feel whether the lock is convenient and comfortable to use.Both unlocking and lock locks are relatively easy.

4. Good spring performance.

If you want to buy a high -quality pruning pruning, you must choose the pruning pruning with better springs when choosing pruning pruning, so in the process of buyingPerformance, if the springs of pruning pruning are relatively strong and stable during the opening and closing process, the quality of branches will not be too bad.

5. Choose easy to clean.

If you want to buy a high -quality pruning trimming, when choosing a repair part, it is best to choose those that are easier to clean, because the branches and cuts often trim the pruning strips, there will be some stains, choose those that are easier to cleanIt is not easy to leave stains on the scissors. For example, many pruning surfaces will have Tellon coating. This coating can effectively prevent scissors from rusting.

6. Choose steel pruning pruning.

If you want to buy a high -quality pruning pruning, when choosing pruning and pruning, special attention should be paid to the quality of branches and cutting tip. Generally speaking, many branches are used for steel.Choose the branches of imported steels. After the pruning of these materials is used for a long time, the branches of these materials are relatively large. In the process of usingThe quality is relatively guaranteed.

7. Choose hand -shaking frictions.

If you want to buy a high -quality pruning pruning, when choosing pruning and pruning, try to choose to shake hands and friction. There are more coarse branches in the process of pruning.If the friction is very large, the cutting of branches is not easy to slide during the cutting process.In addition, you can actually feel the branches and handshake. If it is more comfortable to use, it is not too large or too small. Such branches and cutting are more suitable.

8. Choose pruning pruning that is easy to hold.

If you want to buy a high -quality pruning pruning, try to choose pruning pruning that is easy to hold when choosing pruning.For example, some branches have only two handshake.It is best to choose those handshake with holes, so that there are pruning and pruning with holes. During the process of use, the branches are not easy to fall off, it is not easy to fall off, and it is not easy to hit your feet.