1. What is the principle of Solar lighting

Under the trend of environmental protection, solar energy has attracted much attention as a clean energy source. Solar lighting is a lighting system that uses solar energy as its main energy. It is of great significance to ensure energy safety and sustainable development.Many friends don't know much about the working principle of Solar lighting. Let me introduce how solar energy is lighting:

A complete Solar lighting system includes Solar cell panels, lithium batteries, Solar micro -computer control boards, and LED light sources. When work starts, Solar panels are responsible for converting the absorbed solar energy into electrical energy.Electric energy is stored in a lithium battery; the Solar micro -computer control board will automatically automatically recognize the day or night according to the strength of the light. When the light is insufficient, the LED light source will be automatically powered on, thereby emitting light lighting.

2. What are the advantages of Solar LED lights?

Solar lighting is a new type of lighting. Compared with the traditional lighting method, its advantages are obvious. The advantages of Solar lighting are mainly:

1. No need to be wiring

Solar LED lamps directly use the electricity lighting generated by the power generation of Solar panels. It does not need to be used by municipal electricity to reduce the cost, labor and trouble of wiring.

2. Intelligent control

Solar LED lights usually use intelligent control mode. The method of remote control light induction can be set. It can be set for how many hours of lighting Lights. You can also set the automatic mode. Through the light, it automatically Lights light and automatically turn off the light.

3. Safe and stable

Solar lamps are basically low -voltage 6V and 12V. They do not use high -voltage electricity. It is more secure and stable.

4. Low use cost

Although Solar LED lamps are more expensive than ordinary lamps, only the cost of purchasing and installation. Generally, the cost of high -quality Solar lamps is quite low. The demand for electricity is small, and it only needs to be repaired regularly.

5. Energy -saving and environmental protection

The light source and calories generated by Solar lighting are used by the sun irradiation. It is a green and environmentally friendly clean energy source. It reduces the burden on national energy consumption and has great benefits to environmental protection.

In general, the Solar lighting system is a better way of lighting. With the development of technology, I believe that the future Solar lantern will be more advanced.

1. What is the effect of Solar warning Lights

Solar warning Lights are a traffic signal lamp with solar energy as energy. This Outdoor lamp does not require external power supply, no wiring, simple and convenient installation, Solar power supply, widely used in road administration, fire protection, transportation and other fields.The role of Solar warning Lights is mainly:

1. When the road maintenance operation, place it in a suitable position to remind drivers to drive with caution.

2. installation of dangerous areas of traffic safety hazards on the highway, remind drivers and past pedestrians to pay attention to safety and avoid traffic accidents.

3. In some dangerous sections, such as highway intersection, curve, bridge, roadside village intersection, school entrance, school gate, residential area, factory area, etc., can play a warning role.

4. At night, the Solar warning light is adsorbed on the building. Open the switch to use the energy Lights stored during the day to play a role in building alarm.

5. A warning light can also be placed at the rear or rear window of the car. Avoid rear -end when the car fails.

The main role of Solar warning Lights is to install various needs to be alert to remind others through the flashing source of the lamp.

2. How to install Solar warning Lights

Solar warning Lights are mainly installed in various public places that need to be warned, and the installation is very convenient.The installation method of Solar warning Lights is as follows:

1. Take out the Solar panel and fix the fixed bracket with the Solar panel with a rivet.

2. Use a screw to fix the Solar panel bracket with the Solar plate base.

3. Connect the connection line under the warning light with the wiring box of the Solar panel.

4. Fix the Solar panel with the bracket on the screws on the slow flashing light to open the warning flashing frame and insert the power plug.

5. Fix the hug on the column.

6. Adjust the orientation of the Solar panel, and then fix the screws.

3. What should I pay attention to when installing Solar warning Lights

precautions for the installation of Solar warning Lights are:

1. Pay attention when installing in the building to avoid being installed in a dark and humid place, and place it in a place with sufficient sunlight to avoid unable to collect solar energy normally.

2. The Solar warning lamp is an Outdoor lamp. It should be a solid, durable, waterproof, dustproof shell, and related internal circuit protection design.

3. When not in use, it should be charged once every 3 months. The switch should be turned off when charging.

1. Which of the Solar Traffic signal lights and traditional traffic Lights is better

Solar transportation signal Lights are a type of traffic light that converts solar energy into electrical energy. It consists of Solar cells, controllers, traffic signals, maintenance -free batteries, signal Lights and other main components. Compared with traditional traffic Lights, Solar traffic Lights are its advantage.The

Solar Traffic signal lights do not need to dig ditches and laid cables. They are not afraid of power outage. LED luminous sources have stronger visibility, long service life, and more stable control of single -chip microcomputer.Various planning and support, Solar Traffic signal lights have gradually been widely used.

2. Where can the Solar traffic signal light suitable for use

Solar Traffic signal lights are environmentally friendly and practical, and have strong applicability. It is suitable for installation and use in many places. The common location of Solar traffic Lights is:

1. Far away from the suburban highway and highway intersection of the power grid, where the traffic Lights need to be installed. The installation of traditional traffic Lights requires a long transmission line, which costs high. Therefore, Solar Traffic signal lights are usually installed.

2. In areas where the power supply is tight, in order to avoid the power of the road from the road of red and green Lights that cannot work properly, you will choose to install Solar Traffic signal lights.

3. The newly built intersection, because the traffic Lights have not been paved in time, you can choose a portable Solar traffic signal light to help traffic police direct traffic.

4. In engineering motor vehicles, some large engineering motor vehicles can also be equipped with portable Solar traffic Lights. In case of accidents, it can be removed at any time and placed in front of the car and behind the car.Essence

5. At the intersection of large traffic and urgent need to add traffic signal command, Solar Traffic signal lights can also play a role.

[Solar fence lamp] Features of Solar fence Lights of Solar Wall lights

Solar fence Lights from Solar battery components, super high highlights led Composition of lamps, lamps, etc.It is used as an electric energy to provide lighting lighting at night, and uses efficient led A kind of Outdoor lighting light design of the lighting source.

Platform Wall lamp composition

By Solar battery component (optoelectronics board), ultra -highlight led Lights (light sources), maintenance -free charging batteries, automatic control circuits, lamps, etc.It is used as an electric energy to provide lighting lighting at night, and uses efficient led A kind of Outdoor lighting light for lighting sourcesEssence

Features of Solar Wall lights

1. 1. Using Solar panels with a special microcomputer intelligent controller to convert the light energy to electrical energy without digging and pulling, easy installation, and acceptable to be environmentally friendly.

2. Micro -computer intelligent controllers are manufactured by advanced integrated circuits. The conversion efficiency is high. It has anti -charging, over -loading, automatic adjustment of charging current, polar reverse connection and output short -circuit protection functions, which greatly extend the service life of the battery. It is safe and reliable and convenient to use.

3.. Efficient maintenance of batteries, strong power storage, durable.

4. 4.. The time controller is an automatic tracking type. As the light time is automatically adjusted to turn on the lighting time with different light time in each season, and the energy -saving intelligence control is used, the street lights are automatically turned off in the middle of the night to extend the lighting time.

Principles of Solar Wall lights Working Principles

During the day, Solar light is irradiated on the Solar cell component (optoelectronics board), and the Solar cell generates DC electric meter controller to charge the charging battery. After the sun goes down in the eveningDynasties turn off the light automatically.

top ten brands of Outdoor lights & gt; & gt;

1. home Solar lamps, okay?

Solar Lamp is a new type of environmental lighting lamps. It uses solar energy as its main energy. As people's environmental awareness is strengthened, Solar lamps are used in major fields. Common Solar street lights and Solar courtyard Lights.How about the lamp?

Generally speaking, Solar lighting lamps are also better. On the one hand, its power consumption is relatively low, because it can collect solar energy. If it is rainy weather, it can also be used by the solar energy stored before, or the municipal power function; on the other hand, on the other hand, it can be used;The home Solar Lamp is also relatively safe. Usually, 9V voltage is used to power, and there will be no errors to touch the lamp head and electric shock.

Solar lamps have two types: split type and integrated. Generally, families are more suitable for using integrated Solar lamps. Although the efficiency of solar energy may be less efficient, it is more convenient.

2. How to install Solar lantern hives

The family uses Solar lamps must be installed first. The installation of home Solar lamps is divided into four parts: battery board, battery, controller, and wire. The specific installation method is as follows:

1. Install the panel

Determine the tilt angle of the battery board according to the local latitude and other to ensure that the battery board has sufficient Solar irradiation.After determining the angle, fix the bracket at the position of the Solar light, and fix the battery plate on the bracket.

2. Install the battery

According to the design requirements, dig the box pond well, and put the buried box with the battery into the pool, lead to a wire Tube, and cover the cement board.Before putting the battery in the ground box, you need to determine whether the battery is intact. It is usually recommended to put in the same model and the same specifications and connect the battery in series.The burying boxes need to be used for glue, and the protective Tube is tightly fixed.

3. Install the controller

The controller generally uses a special controller of Solar power supply. When the connection is connected, connect the wiring terminal of the battery on the controller, and then connect the photovoltaic panel wire wire, and finally connect the load terminal.Be sure to pay attention to the battery, photovoltaic battery panel, load,-extremely cannot be connected, otherwise it may cause short circuit.After connecting the line, place the controller in the lamp column and fix it with bolts.

4. Pay the wires

Put the lamp head on the lamp arm, adjust the irradiation angle, and tighten it with the screw.Connect the lamp head line with the Solar panel and tighten the waterproof joint.After receiving it, test whether the Solar Lamp can be used normally, and it can be put into use normally.