1. Do you want to hit the home improvement Wall cabinet?

1. The advantages and disadvantages of the Wall cabinet to the top

advantage:

(1) It is undoubtedly to increase the storage area to the greatest extent, which is very practical.

(2) A whole cabinet makes people feel more beautiful.

(3) If you do the top, you will not worry about it will be ashamed, so it is more convenient to do it.

shortcoming:

(1) Since the cabinets are all plates, wood is easily moisture, especially when placing by the wall, it is wet. Once the heat is swollen and contracted, the cabinet volume will increase.The space is because it will lead to increased load load, which will cause deformation and affect the service life of the cabinet.

(2) If you hit the top, it is very troublesome to take Dongxi, and the short ones cannot be obtained.

(3) The cabinet is hit to the top. If the room space is great, if the space is small, it will make people particularly depressed, especially the kitchen!

2. The advantages and disadvantages of the Wall cabinet do not hit the top

To a large extent, the advantages and disadvantages of not playing to the top are just the opposite of the above.At the same time, you can save money on the top, but it is easy to hide ash, and the cleaning is more troublesome.So how to overcome the shortcomings that do not hit the ash?

(1) The ceiling is sealed with gypsum board so that there is no empty space over the cabinet, and it will not hide the gray.

(2) Put a storage box or storage basket above the cabinet, which can effectively use the air area and avoid the ash.

Second, how much is the Wall cabinet a Square Square meter

There are two calculation methods in the market on the market: one is the projection area algorithm, and the other is the development area algorithm.

1. Projection area algorithm: The projection area algorithm of the wardrobe is the simpler of the two algorithms.Customized wardrobe projection area: wardrobe width x wardrobe height = projection area, projection area X wardrobe unit price = wardrobe price.If a wardrobe is 5 meters, the height is 2.8 meters, and the unit price is 1,000 yuan/Square meter. The price of this wardrobe is 2x2.8x1000 = 5600 yuan.

2. Expand area algorithm: The wardrobe area algorithm is more complicated than the projection area algorithm.Calculation according to the area of the wardrobe is calculated based on the board used in the cabinet.That is, when the consumer finish the size of the merchant, and then produce a good wardrobe design plan, and determine the plan, the merchant spreads the calculation of all boards used by the consumer to determine the plan.The unit price of the plate with different thickness of the plate of the board = the price of the wardrobe.(No other functional accessories)

Although the price algorithm of this customized wardrobe is more troublesome, the price of various materials is clear, but it is fair and fair for consumers.Consumers can choose the internal pattern of the wardrobe according to their own habits to control the budget, and the price is more transparent.

Wall cabinet installation method

1. Determine the installation location of the Wall cabinet

Hanging wall cabinets are generally connected to the wall with two screws. Therefore, you need to determine the location of the screw.The position needs to be determined according to the installation height and the position of the nail hole of the cabinet.The tools that need to be used when the installation position is mainly tapetage and color pen.

2. Use impact drilling perforation

After determining the drilling position, you need to use impact drilling.The shock drill is connected to the power supply and a deeper installation hole is made in the marked position.Pay attention to it, there will be no water pipes and electric pipes before drilling.

3. Use the hand hammer to load the glue particles

Before connecting the screws, you need to install the glue particles in the screw hole. The glue can better fix the screws.Use your hand hammer to knock the rubber particles into the drilling hole.

4. Install the screw connection cabinet and wall surface

After installing the glue, connect the screw parts to the cabinet and wall.Then the installed master then replaced the drill with a shock drill and nailed the screw into the wall.

5. assembly and handle

After the cabinet is fixed to the wall, the cabinet is left to pull the hand.The handle installation is relatively simple. Use the screwdriver to fix the handle and screw piece in a fixed position.

precautions for Wall cabinet installation

What we should pay attention to when we install the Wall cabinet is to be careful not to destroy the wall when installing.To keep the indoor air circulation, the cabinet body is dry and extend the service life.Avoid water, you should use the cloth to dry it in time if there are water droplets.Do not contact the cabinet with the ground during installation. soft objects should be matched to avoid bumps.Pay attention to the surface of metal objects such as screwdrivers and other short -distance plates.

12. Inspection before installation, discover abnormalities, and feedback for the first time in order to change it in time.

2Carefully check the identification of the drawing and the occlusal state of the scene to determine the installation order.

3Pay attention to the protection of product components during the installation process.

4, Beam position, top line, and closing plate cut corner corners should be checked carefully to cut accurate cutting.

5,Notice2Try not to place the layer of the plate side plate on the side of the cabinet2Inside the cabinet.

6If the diagonal cabinet of the tape is used is equal, the phenomenon of uneven layer should be placed with a planer to nail the back plate.

7If the customer should ask questions during installation, answer it in time, and inform the reasonableness of the processing method.

8If there is a problem with the installation, the installation workers must fill in the installation notes and change the re -order to do a good job of tracking services.

9After the installation, it must be self -inspection and adjustment, and then the customer is accepted and the signature is confirmed.

10After the entire installation service process is completed, the customer must be repaid a clean environment.

1. What is the size of the Wall cabinet

Generally, the custom Wall cabinet is 2400 mm height, 1800 mm long, and is divided into two units with 900 mm long. The depth of the cabinet is 600 mm.

(1) Cabinet door of the Wall cabinet size

1. glass Wall cabinet door: Single -lap door is recommended not to exceed 950 mm, and the height is within 2400 mm.

2. Plate -type Wall cabinet door: Single -sliding door is recommended not to exceed 1200 mm, and the height is within 2400 mm. Note that the core board may be deformed.

(2) Clothing area of the Wall cabinet size

1. bedding area

400-500 mm high, 900 mm wide.Because it is inconvenient to get items, the upper end of the Wall cabinet is generally used to place non -commonly used items such as quilts, which is also conducive to moisture -proof.It is best to put the quilt in the storage tank. Not only does the dustproof, it is convenient to get it. According to the thickness of the quilt, the height of the bedding area is generally 400-500 mm.

2. drawer

400-800 mm wide and 190 mm high.Generally, 3 or 4 drawers are planned below the jacket area, which are mainly used for storage underwear.Calculating according to the height of the underwear, the height of the drawer should not be lower than 190 mm, otherwise it is easy to clamp the clothing when closed the drawer.200 mm high, you can put your clothes.

3. The top area

1000-1200 mm high, not less than 900 mm, and generally 55-60 cm.The jacket area is used to hang up jackets such as suits, shirts, jackets, etc.

4. Long clothes area

High 1400-1500 mm, not less than 1300 mm.Long clothes areas are mainly used to hang long clothes such as trench coats, down jackets, coats, dress, and ritual clothes.You can plan the width of the long clothes area according to the number of pieces of long clothes. Generally speaking, 450 mm wide is enough to use it alone. If the population is more, it can be widened.

5, stack area

350-400 mm high.The stacked area is used for stacking sweaters, T -shirts, Casual pants and other clothes.It is best to arrange the area between the waist to the eyes, so that the convenience can be reduced, and it can also cut into dust.If there are elderly people and children at home, they can expand the stacked area properly.Generally, after the width of the clothing is folded, the width of the cabinet should be between 330-400 mm.It is best to plan for a conditioning activity plate, which changes according to demand. For example, when the child grows up, you can hang the clothes rod to the top of the stacked area and change it to the jacket area.

How to choose a Wall cabinet

1. Unified style with the overall style

When buying the Wall cabinet, first see if its style is matched with your own house style, it is best to choose the Wall cabinet according to the style of your house.The general materials of the Wall cabinet are wooden materials, so when choosing, you should pay attention to the decoration effect you want to present. For example, if you are a simple style, you can choose a light color Wall cabinet.Wall cabinet.

2. Follow the quality of materials

Whether the material is environmentally friendly is related to the health of you and your family, so you need to check the national authoritative test report when choosing, and confirm whether the material meets the national compulsory personality standard.Whether the board is strong also determines the service life of the Wall cabinet. The thickness standard of the board should be 18mm. Such a plate is strong and durable, and the service life needs to reach more than 15 years. Of course, if you want to be thickened, the price is relatively high.

3. Look at the edge technology

Check whether the Wall cabinet process is exquisite. First of all, you need to look at the edge of the board. The edge sealing and the protection and moisture resistance of the plate are all functional. Good edge strips must ensure that the end surface of the edge bar and the plate is firmly flat.It is also necessary to ensure that the binding of the edge bar and other sides cannot have defects that are exposed, bonded, and excessive gaps. At the same time, the transition also requires natural, Smooth, and Smooth.

4. Look at the Wall cabinet price

When buying a Wall cabinet, you need to pay attention to whether the price of the Wall cabinet is transparent. First of all, you need to ask the calculation method of the merchant's Wall cabinet. Secondly, you need to ask the project content and technology contained in the price.The price of hardware accessories (usually the Wall cabinet area does not count the price of the drawer, plate, and hardware accessories). It is necessary to use a fair algorithm, calculate the price based on the actual standard materials used, and calculate the price based on the number of actual materials.