Is the ankle useful?

Ankle protection is a kind of sports protective gear that protects the ankle joint of the human body. It is suitable for motion of hair balls, tennis, football, bicycles, dances, etc., or is used for reincarnation, postoperative fixation and rehabilitation intensity protection in the ankle joint.

The ankle protection is a protective effect on the pressure of the ankle joint. It is a lightweight ankle -protective appliance. It is suitable for preventing and ankle sprain, ankle ligament injury, and unstable ankle.It can play the role of the alarm and ankle movement, prevent sprains caused by the ankle, reduce the pressure of the ankle injury, strengthen the ankle joint, and promote the healing of soft tissue cure of the damage tissue.Generally speaking, the protective gear is tight to effect. The protective gear is made by elastic materials. It must be tightened by the joint, which is equivalent to adding a protective film at the joint.If it is loose after putting on, the effect of exercise is not good, it can only be used as warm.Of course, the protective gear should not be too tight, affecting blood circulation.

The ankle is worn inside the socks or outside

The ankles can generally be worn closely. It is not particularly particular about wearing socks or socks. It depends on the comfort of personal comfort.The main reason is that the protective cover should be tight on the joint.The ankle beam is made of foam rubber material. The surface composite knitted fabric is made of chemical fiber. The breathability of the overall material is worse than the ankle protector of a knitted and elastic bandage.When the weather is hot.Therefore, if you feel uncomfortable to wear, you can choose to put it outside the cotton socks to help absorb sweat.

How to tie an ankle

The effect of bandage ankle protection is higher than that of ordinary ankles, and it is more professional.The price of a penny is tied to 5 cents, and the cost -effectiveness is high. This bandage can also be used as a knee pads, elbows, and arms surrounding protection, which is worthy of use.

1. Start from the instep to the arch.

2. Turbing the ankle.

3. Go to the back.

4. Turn over your feet and go around your ankle.

5. Go back the ankle and complete.

precautions

Don't be too loose or too tight in wrapping. Too pine does not have a protective effect. Too tightly affects the blood circulation. The tightness is re -adjusted according to personal habits.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Meicoscopy] What are the differences between Sunglasses?

What is the role of Sunglasses

Among the many Sunglasses brands, many people have taken their eyes, and they finally chose their favorite Sunglasses brands. You can face many Sunglasses types and do not know where to start."It is beautiful", but not practical Sunglasses.Today, we will mainly talk about what types of Sunglasses are divided into use, so that everyone will buy Sunglasses that suits them in the future.

No matter what Sunglasses brand, according to its purpose, it can be divided into the following three categories:

What are the functions of different Sunglasses?

First, light -colored Sunglasses are actually fashionable variants of sunshaders. Although the blocking effect of the sun is smaller than the sunshade, its fundamental purpose is to play a decorative effect. Relying on rich colors and trendy styles are deeply favored by young people.Over the years, fashion women have loved this Sunglasses suitable for all kinds of clothing.

Second, the Shading mirror is well understood, and it is literally understood that it is used to block the sun.If people do not wear Sunglasses under strong light, they can only adjust the size of the light by the pupils of the eyes, but this is limited. Once the light intensity exceeds the human eye adjustment capacity, it will inevitably cause damage to the eyes.Therefore, in the summer, a sun mirror should be used to protect your eyes and reduce the damage caused by fatigue and strong light stimulation caused by the self -regulation of the eyes.

Third, special Sunglasses are the enhanced version of ordinary sunshade mirrors. Its indicators are higher than ordinary Sunglasses. They have a larger function of covering strong light. Generally, they have different requirements for special occasions. They are commonly used on beaches and skiing.The sunlight such as mountain climbing and golf needs to have a good outdoor sports with a good vision.

precautions

Different people should choose their own Sunglasses according to different purposes, but one thing is very important. When choosing, you must start from the basic principles that can ensure the safety and vision of the wearer.

1. The correct installation method of Fish drift

In fishing activities, the proper installation of Fish drift is important for fishing. Fish drifting is the eyes of the fishermen. It can reflect the situation of the fish bite and help us grasp the underwater situation. So how to install the Fish drift?

1. Choose the right Fish drift

Choose the right Fish drift according to factors such as fishing environment, deep water, and water flow.

2. Install Fish drifting seat

Put the Fish drifting on the fish line to ensure that the Fish drifting seat is close to the fish line.If necessary, you can use a silicone Tube or other materials to increase the sealing effect.

3. Install Fish drift

Insert the fish into the Fish drift to ensure that the Fish drift and the fish line are vertical, and then adjust the position of the Fish drift to achieve a suitable depth.Generally speaking, the tip of the Fish drifting should be about 1-2 cm below the water surface, so as to ensure that a small angle can be formed below the water surface, thereby more sensitively reflecting the situation of the fish bite hook.

4. Fixed Fish drift

Use space Beans or rubber rings to fix the fish on the fish line to ensure that the Fish drift will not slide or fall off.Space Beans and rubber rings can be purchased in fishing gear shops or made by themselves.

5. Adjust buoyancy

Adjust the buoyancy of Fish drift as needed.If you need to increase the buoyancy, you can add foam or other lightweight materials to the Fish drift; if you need to reduce the buoyancy, the amount of foam or other lightweight materials can be reduced.

6. Test

After installing the Fish drift, test to ensure that it work normally.Hang the hook in the water and observe the reaction of the Fish drift.If the hook is not hung on any item, the Fish drift should be kept below the water surface; if the hook is hung on the items, the Fish drift should rise quickly or move to different positions.

2. How to tie different types of buoy to the fish line

The buoy is also called float and Fish drift. It is one of the indispensable tools when fishing. It is also one of the important indicators to measure fishing technology and experience. Generally, Fish drift is tied to the fish line. According to the different forms of Fish drift, the installation form also forms the form of installation.Not the same:

1. The method of vertical floats to the fish line

The vertical float is also called a Taiwanese fishing float, which refers to a fishing Tool that conveys the information of the fish swallowing the bait and the location of the place where the bait is.From a structure, floats are divided into three parts: drifting, drift body and drift tail.If the material is divided, it is mainly Balshan floating, reed floats, feathers floats and nano -floating.

The steps of vertical floats to the fish line:

(1) Put into two space Beans on the main line.

(2) Then put into a drifting seat. Be careful to match the size of the floating drifting feet. Do not be too large or too small.

(3) After entering the drifting seat, two space Beans are installed to lock the drifting seat.

(4) Then put into the lead leather seat and tie the eight -character ring.

(5) Insert the float foot into the drifting seat and complete the connection between the float and the main line.

2. The method of spherical floats to the fish line

The spherical float, also known as the sea pole ball drift, is generally ABS material. From the structure of the structure, the float is mainly divided into drift tails, belly and drift tip. There is a round hole in the drift tip.of.

Steps of spherical floats to the fish line:

(1) Different from the hand pole, the spherical floats generally do not need to drift the seat, but use the connector to connect the main line to the float.

(2) Similar to the installation steps of the stand -up floating drift, two space Beans are fixed on the main line on the main line.

(3) Put on the other end of the connector into the reserved hole of the drifting tip and lock it to complete the installation of spherical float.

2. The method of seven -star drift on the fish line

Qixing Drifting is mainly used for traditional fishing. Qixing Drifting refers to seven different colorful Beans with different colors. Each eye -catching bean can be worn on the fish line like space Beans to pass the role of eating hook signals.Its color is generally three types of red, yellow, and red and yellow. In addition, there is also a fluorescent seven -star drift loved by night fishing enthusiasts.

The steps of seven stars drift on the fish line:

(1) Take a pack of seven stars.

(2) Put the Qixing sequentially on the main line according to the method of installing space Beans.

(3) Then use two space Beans to fix the last leading leather seat, and install an appropriate amount of lead Skin weight on the lead leather seat. If you use a dumplings with heavy weight, you can ignore this step.

(4) The fish hook can be used for fishing, and the seven -star drift installation is completed.

4. The method of the horizontal float on the fish line

The horizontal float is also called automatic bottom -free dot drift. It consists of three parts: Zhongtong wire ring, drift body and drifting bodies.The point wave line is mainly composed of drift -assisted lead pendants, buffer beads, dot drift, main lead pendant, and link buckle.Generally speaking, the main lead pendant is more important than auxiliary lead pendants, and because the buffer beads and lead pendants can be slid at random, so you do nt need to adjust the bait into the water to find it automatically.When the fish bite hook, the auxiliary lead is driven, the water line is pulled, so that the floats are swinging up and down, forming a wave effect, so it is named a little wave floating.

The steps of the horizontal float on the fish line:

(1) Pass the main line through the auxiliary lead and buffer bead.

(2) Pass the main line through the wave float.

(3) Then pass the main line through the buffer bead and the main lead.

(4) Tie the main line on the connection buckle or the eight -character ring.

(5) Tie the sub -line group on the connection or eight -character ring, and hang the bait to fish.

The correct way to wear the bloated life jacket

1. Put your head into the life jacket.

2. Tie the straps on the left and right sides.

3. Pull the tension on the left and right sides, the inflatable valve is opened, and the life jacket is inflated within a few seconds.

The inflation function of the qi -blee -type life jacket

1. Manual inflatable: Pull the pull rope on the inflatable device before or after falling or after falling or after falling or after the water, so that the tie rod is not less than 90 degrees, the thorns are pierced to pierce the gas cylinder film, the high -pressure CO2 gas is poured into the airbag, and the buoyant is generated after the gas swells.

2. Automatic inflation: After the water is dropped into the water, the life jacket is immersed in the water to soften the water sensitive element in the automatic device, loses blocking the needle, and the spring stretch pushes the piercing needle to pierce the gas cylinder sealing film CO2 gas to fill the airbag and generate buoyancy.

3. Blowing the mouth is a one -way valve type, and the one -way valve is automatically closed after blowing.

What are the types of qi -style life jackets?

Blay -type life jackets are divided into three types according to the appearance style:

1. Vest -style qi qi and life jackets are commonly known as horses -type qi qi life jackets.

2. scarf -style qi and life jackets are tied to the neck like a scarf.

3. Belt Bloating life jacket, also known as qi -type Belt life ring, water seat Belt.

There are two specifications of all styles of qi and life jackets, one manual type and one automatic type.Suitable for fire, maritime police, water police, armed police, border defense, maritime affairs, fishery administration and other units to engage in water rescue activities.

The performance indicators of qi -blee -type life jackets

1. Automatically inflatable within 5 seconds of water, generate more than 15 kg of buoyancy.The 24 -hour buoyancy loss is less than 5%, and the performance of the main accessories and materials meets national standards.

2. The airbags are made of imported polyether TPU materials, which have excellent aging resistance and hydrolysis characteristics.

3. The dry side of the water is greater than 120mm, and the backward angle is 20-50 degrees.

4. The product is standard for search whistle and reflective stickers.

What are the fabrics of qi -qi -type life -saving clothing

Bid-type life jackets use TPU fabrics, TPUs (Thermoplastic Polyurethanes), and thermal plastic polymethlate, which is a linear embedded cluster composed of low polymer polymirol soft segments and diisocyanate-expansion hard segments.The TPU can be made of saliva, film blowing, pressure delay, or coating, which has the excellent characteristics of good elasticity, strong toughness, abrasion resistance, good cold resistance, and environmental protection and non -toxic.TPU fabric has the following characteristics:

1. Hardness planning wide

After changing the ratio of the components of the TPU composite fabric, the Tent cloth can get products of different hardness, and follow the hardness of the hardness. Its product still adheres to excellent elasticity and abrasion resistance.

2. High mechanical strength

The carrying capacity, impact resistance and shock absorption function of TPU composite fabric products are excellent.

3. Extremely cold -resistant

The glass state changing temperature of the TPU composite fabric is relatively low, and the canvas factory still adheres to excellent elasticity, softness and other physical functions at minus 35 degrees.

4. Good processing function

TPU composite fabrics can be processed with common thermoplastic materials, such as injection molding, extrusion, pressure extension, and so on.At the same time, the TPU composite fabric/cloth processing with certain polymer materials can obtain a polymer alloy with complementary functions.

5, oil resistance, water resistance, mold resistance.

6. Good recycled utilization.

There are two methods of TPU composite fabric. One is called and then sticked: first make it into a TPU film, then fit the glue with the fabric, and the other is called online composite: apply the glue on the fabric may not be glued.The fabric is made into a TPU composite fabric or clipped mesh.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How is sports pants and rope

The waist circumference of the sports pants is basically loose. Even if the two bands are not disconnected, it does not affect our wearing, but the two bands on the sports pants are too long. Sometimes you accidentally mayThis Belt was pulled out directly.Many people do nt know how to hit this rope, just hit a knot or bow, it looks very unsightly, and it is troublesome to disassemble and fasten it again every time you wear it.In fact, there is a very simple and clever way to hit this rope. You only need a pen. Is it very curious?The specific steps are as follows:

1. First of all, we prepare a pen. This pen is preferably a cylindrical type. Do not have too many raised or depressed places, and then we wrap the rope on the pen for three laps. If the ropeIf you are too long, you can go around 4 or 5 times.

2. After the entanglement is wrapped, we will pull out the pen out of the middle, and then pull the other end of the rope from the circled circle, so that we have a half knot.

3. Next, we use the same method to make another rope of the pants into a half knot. Note that the half -knot on both sides must be symmetrical, do not skew up. After the fight, we can get two and a half knots.

4. Then we connect the two and a half sections to complete a complete section. What we have to do is to pass the two ends of the rope through half of the other rope.

5. Stretching the left side to the right, the right side to the left, and then gently pull it into the rope head on both sides to get a beautiful knot.

Note that before the knot, we also need to adjust the looseness of the waist waist in advance to make ourselves more comfortable to wear.

Second, how can I get back when the rope of the sports pants comes out

The rope of the sports pants can be released according to the following methods:

1. File needle

After opening the needle needle, use the sharp end to hook the rope of the sports pants, and then seal the needle needle, and slowly lead to the other end through the entrance of the rope of the sports pants.From the outer fabric, you can touch the rough shape of the needle needle inside. You can slowly use your hands to put the needle needle to the other end.

2, straw

You can tie the end of the sports pants rope with the end of the straw, so that the straw is slowly put in the pants rope and the mouth is slowly rubbed from the cloth to the other end.To the other end, at this time, the solution of the straw and the rope can be used normally.

3.

The needle wire can also be skewed back to the rope of the sports pants, but the needle wire is more dangerous, so it is recommended to be careful when using it.Connect the needle wire to connect the rope, and then slowly penetrate the pants rope in the entrance of the pants to the other end. At this time, pull out the needle line to pull out the pants rope, and then cut the connected rope.

4, chopsticks

The chopsticks are thicker. When operating, you must pay attention to the accuracy.First, the bag should be tied directly on the chopsticks, and then moved the chopsticks to gradually pass through the holes on the pants.It must be noted that the knot that tie the chopsticks should not be too large, otherwise the pants holes will not be easy to pass through the band and move the chopsticks while moving the band to the hole of the other sports pants.You need to remove the chopsticks.