How can I store too much debris at home?

1. Place different categories

There are more miscellaneous things at home. Even if it is sorted out, it will not be able to find it when you use it next time. As a result, it turns the bottom of the box and becomes messy.Therefore, the easiest way to treat such fragmented items is to divide them into the door, and then put them into various types of storage boxes and storage baskets. Finally, the cute little label is perfect.

2. cosmetics storage box

The cosmetics and Skin care products used by girls are countless. Do various brands and various effects cosmetics make you storage very troublesIf you can't find it!

3. Multi -grid special storage box

The debris in the wardrobe is stored, and the pairs of socks, ties, small inner, etc. The nemesis stored in these wardrobes, if you don't organize and keep it properly, you will not only look messy, but also be inconvenient to find.At this time, you only need to buy a special special storage box with a small grid to easily sort out these small troubles, which are both beautiful and convenient.

4. Use of space behind the door

There are some small things behind the door. It may be often used. The space outside is full, and you don't want to open the finishing box all day. At this time, you can consider the space behind your house and hang a one on it.Set the rack, storage bag, and even set a small bookshelf.

5. Small dressing box

There are more crude things on the dressing table. It is common to place clips, rubber bands, fragrance and other items. It is not only visually not visually not beautiful, but also becomes more messy.The storage difficulties of small items.

6. Special dedicated storage partition for small cartons or drawers

Use a small carton or drawer dedicated storage partitioning Tool, which will be your uncomfortable small accessories, various member card pills, and snacks.And it will become clean and refreshing through the small box.

7. toys storage box

When children's toys are stored, we can choose a cute cartoon storage box based on children's characteristics and preferences, and organize their toys with children, entertain, and develop a good habit of automatic cleaning toys.

How to install the Mu Gao Flute Tent

1,First of all, choose a Tent where the terrain is relatively flat, and the ground should be cleaned.

2,Put the inner Tent on the ground, take out the folding Tent pole, straighten each section, and connect it into a long pole. Put on the Tent rod cover on the Tent according to the instruction manual. Generally, it is a cross.

3,After both rods are worn, you can then insert one head of each pole into the small holes on the corner of the Tent, and then cooperate with the two people, hold the two heads, and put the pole inward.Get up.

4,Until inserting other heads into small holes, the Tent was basically formed after inserting it in, of course, it was just a rough outline.

5.If you want to be firm, you must use your body to bite the cross of the Tent pole, and then think about the orientation of the door. You can insert the Tent with a nail in the four corners into the soil.The bottom of the account is well supported, so that the entire Tent is drum.

6.Put the inner account in the open account (this step is to pay attention to the uniform of the door and outside the account, otherwise it will not be able to go in). The four corners of the inner account correspond to the four corners of the Tent.

7.Some tents are nailed around the four corners of the inner account with the four corners of the foreign account. See if there is a ring that can be nailed to the ground.The distance, because it will not get wet when it rains.

8.There are some ropes on the external account, which is used to strengthen the Tent, but there is no big wind to use; but it is best to pull people who do nt pull the rope without pulling the rope and not being afraid of sleeping.

How to collect the Mu Gao flute Tent

1. First move all the items in the Tent, and then unlock the four spring buckles from the eyes of the Square Tube so that the Square Tube can be moved.

2. Two people stand relative and stand on the vertical folding of the canopy bracket to ensure that when they are hard, the top canal can be folded up.

3. Then each person holds the two brackets of the Tent with both hands, push the bracket in the direction of the opponent, and fold the Tent stent.

4. After folding to a certain degree, you can remove the Tent fabric and place it flat on the ground.

5. Dry the dirt and water stains on the surface of the tarpaulin, then fold it and put it in a dry place. Do not press the heavy object on the tarpaulin.

6. Finally, remove the top of the canopy, collect the brackets of the four feet, and push the inner Tube, so that the Tent is put away.

7. After the Tent is put away, you need to pay attention to put the Tent in a completely dry place. Try not to put other items on the Tent, so as not to cause the waterproof glue strip material to be bent at the bending of fatigue and produce a dehydration.Lose.

[Mu Gaosi Mobigarden Tent purchase & gt; & gt;]

1. How bright the street lights in the residential area are suitable

The brightness adjustment of the community street lights is a big problem, mainly because the street lights are too bright, which will cause residents on low floors to feel dazzling, and the light pollution is more serious. If the street lights are too dark, it will affect the night travel of the community.In the accident, the thief is easy to make a crime, so how much is the street lights in the residential area?

In fact, my country has clearly stipulated the brightness standards for street lights in residential areas. According to the "Urban Road lighting design Standards", the road of community roads should be about 20-30LX, that is, people can be 5 See clearly within 10 meters.The lack of lighting in some communities is mainly due to the reduction of lighting requirements in order to save costs and electricity.In addition, when designing the street lighting, the support of the branch road is narrow and distributed between the residential buildings. The uniformity of street light lighting needs to be considered. Generally, it is recommended to use unilateral layout lamps to light up lighting.

2. Requirements for the installation specifications of community street lights

1. Light type

The width of the community roads is generally 3-5 meters. Considering the illumination factors and convenient maintenance of the community. Generally, the courtyard Lights between 2.5 and 4 meters in the community are used to light up.Personnel can quickly repair.In addition, courtyard Lights can pursue the beauty of the overall lamp according to the architectural style and environmental atmosphere of the community and beautify the community.

In addition, the shape of the street lights should also be simple and Smooth, and there should not be too many decorations. If there are large -area lawns and short flowers in the community, you can also consider using some lawn Lights.

2. Light source

Unlike the high -pressure sodium lamp commonly used in main road lighting, the main light sources used in community lighting are metal halide lamps. Gold halogen lamps with cold -colored light can create a sense of quietness, which can make the entire community feel layered and create low -floor residents for low -floors residents.A soft Outdoor environment, avoiding light pollution at night at night.

Community lighting also needs to consider vehicle factors, but the vehicles in the community are not like the vehicles on the main road, generally slow, so the pursuit of uniformity in brightness is not high.The brightness of the lamp area is relatively high, while the brightness in other places is low.

3. Light position arrangement

Due to the complexity of the roads in the community, there are many intersections, and there are many splits, the lighting of the community should have a good visual orientation, and unilaterally arrange it;Side layout.

In addition, when conducting community lighting design, we should pay attention to avoiding the impact of Outdoor lighting on the indoor environment of the residents. The lamp position should not be too close to the balcony and windows, and it should be arranged in the green Belt on the side of the road.

4. Power distribution settings

For residential communities with a small area, the lighting distribution box is generally located in the center of the community and sent electricity to the surrounding area. It is a central radiation type. The lines are not long, but there are more bits.Multiple ways to send electricity can not only solve the loss of voltage reduction, but also facilitate future pipeline maintenance, but the cost is slightly higher.

After the street light supply power distribution point is connected to the control cable, it can be controlled by the street light control network. It can also be equipped with control devices such as wireless Sanyao.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

one,SkiletWhat is

Skiboard is a skiing equipment, which invented Nordic in the early 20th century to increase the speed of skiing during skiing.The structure of the Ski panel consists of a base, arched head, contact, edge, effective edges and bending points.Skiboards are mainly divided into two types: skiing veneer and Ski double board. With the continuous progress of technology, skiing boards have been differentiated into many different types.

2. There are several types of skiing boards

1. All Mountain Skis

This is the most common type. Most of the snow friends use this type. The all-round board can actually be classified as this column, with the waist width of 68-75.This type of board is generally reduced by 15 cm to 5cm.If you choose, look at the level and skiing habits.Beginners recommend that they choose short, good control, and good technology improvement.Senior skiers actually prefer to enjoy the fun brought by speed, so that the board must be relatively long.In addition, people with heavy weight should choose a little longer.

Just like its name, the goal of this Skiboard aim is to glide in any region.Its shape is very close to the Carving skiing, so it is still suitable for taxi on the compact snow surface.It is different from the Carving skilets in its waist width. Most of them are between 75 and 90 mm, which can give you more buoyancy in the snowy snow.There are many global skiing boards, all kinds of shapes and hardness, some like traditional traditions with Ski panels, while others look more like free -style skiing boards.

2. Carving Skis (Carving Skis)

Carving skiing board is the most used Skiboard for most casual Ski people.It is very suitable to glide on the compact snow trail and there will be a lot of fun.Generally speaking, the waist of the snowboard (the position under the foot of the Ski) is about 70 to 80 mm width, and the width of the head and tails exceeds 110 mm.This shape allows the Skiboard to slip along the edge of its edge.

3. Free -style Ski board

Free -style skiboards are very similar to wild snowboards, but they are not so wide.Its design goals are mainly targeted at gliding outside the snow road, but it can also slip well in the snow channel.It is slightly wider than skiing plates across the region, and its waist is generally between 80 and 100 mm.The mainstream free -scale Ski board will have some Rocker, and the board head and the tail of the plate are slightly raised from the side.This design helps skiing to float on various snow surfaces, and can easily change the direction of gliding. At the same time, it can also provide sufficient grip on the compact snow surface.

4. Wild Snow board (Powder Skis)

Wild snowboards are generally between 88-120.(Some people say that the waist width of the wild snowboards generally from 90 mm to 140 mm, and the length is generally 170 cm to 200 cm.) As mentioned above, wild snow buoyancy is the key.Choosing a wild snowboard is generally as tall as height, and such as those with a width of 110 or more, it is difficult for you to find boards below 176cm.You sink in the 5 -meter -deep wild snow, but it is difficult to get up.

Compared to the snow trail, the wild snowboard has a wider and longer body, but the snowboard elasticity is softer.The larger length and width can provide sufficient buoyancy in the deep and soft snow.Some wild snowboards have designs called Rocker or head and tails. Compared with ordinary snowboards, the wild snowboards start to rise up in the head and tail., To provide more control capabilities.There are also some wild snowboards that have the waistline that are opposite to ordinary snowboards, that is, the width of the head and the tail of the plate is narrower than the waist waist. This design is still to improve the buoyancy and handling in the powder snow.

5. Big Mountain Skis

The waist width of the high mountains and wild snowboards is usually between 90 and 130 mm. It is harder and longer than ordinary skilets.Takayama Wild Snowboards are usually 180 to 210 cm long. This snowboard is the favorite of extreme Ski people.

6. SLALOM Skis (SL Skis)

This kind of skiing plate is generally divided into large turns and small rotation.The level of skiers who can control the competitive board should be very high.Large turning boards are generally choosing a length of similar to their height, and small backboards generally choose the length of 15cm.But if you pursue speed, choose a little longer, so that the stability is higher.

Compared to the above -mentioned snowboards, the small competitive schola plates look very short. The length of the snowboard used by the fastest competitors in the world today is about 160 cm (but these people will not consider any shorter than 205 cm in previous years.To.The small turn board is dexterous and reactive. It can turn on the solid snow surface at an incredible speed, but this kind of board is not a good choice for the unsuccessful snow trail and deep snow.

7. Giant Skis (GS Skis)

The large back Ski board has a longer waist radius than the small backplane, and it is harder, so its turn radius is longer.It is also used to glide at high speed on a solid snowway, usually more length than the small turn board to enhance stability and grip.

8. Fancy skiing board (two-ends of skiing boards, TWIN-TIP Skis)

The two -ends are the favorite of those who like to challenge the semi -Tube snow trails and venue parks, and are also called Freestyle Skis.This kind of Ski board is very soft, and the tail is raised, and it can provide better tolerance when jumping up.Please try it before choosing a fancy board.At the same length, fancy boards can slide like the entire area plate. If the performance allows, a slightly shorter fancy board is also possible.

9. Cross Country Skis

The main difference between off -road board and all Alpine Skis mentioned above is that it is not only designed to slide from the landscape, it is very light and easy to wear in a vast area.Its fixed device allows the skiers to lift the heels of the Ski, walking as usual.Compared to other snowboards, in order to provide grip in the process of moving forward, its bottom bottom has texture.The usual skiing boards need to be waxed and choose different types of wax according to different snow quality, while it does not need to be waxed and easy to use.

10. Competitive off -road Ski board (Cross Country Racing Skis)

Competitive off -road boards are used to move quickly on compact Ski trails. It is very narrow and is not suitable for snowfills that are not opened on the road.There are two types of competitive off -road boards, one is a straight slip, and the other is the traditional pedal ice type.Because it is necessary to judge which type of snowboard is more suitable for yourself according to the Ski style, its own weight, and the local snow quality, only you can choose the Ski board through the above factors.

11. Touring Skis (Touring Skis)

This is a Ski board used by the Alpine Touring activity. This Ski board has a variety of width and style.The wider model, especially the type of metal edge, can travel through or engaged in Ski Camping activities in rugged terrain.The narrow and lighter model is generally used to travel on a gentle terrain or compact snow.Many people now use free Ski panels to replace the climbing board, which can adapt to more snow quality.Backcountry skiers usually need a pair of stop skating bands to the bottom of the snowboard to help climb.

three,SkiletWhat is the length

When choosing the length of the skiing board, the maximum is limited to the height of the wrist that does not exceed my arm, and the shortest should not be shorter than the crotch.Choose a long relief snowboard to use fast, good stability, short Ski board speed, slow fibrillation, poor stability.

For beginners, too long skiing boards are not easy to control, and it is difficult to turn it. It is not conducive to improving their technical level. Beginners are best to add about 5 cm with their height.Beginners should also choose skiing boards with large elasticity.Because this kind of Skiboard is not easy to bump when it encounters uneven snow surface, the braking effect is better, and it is easier to operate.