1. Method of the Dutch iron

1. Soil: The iron potted plants in the Netherlands usually use garden soil, corrupt leaf soil, and river sand as potting soil. After mixing the three as a ratio of 1: 1: 1, add an appropriate amount of Organic fertilizer and put them in the sun.The sun can avoid insect eggs and germs in the soil, which is very helpful for the healthy growth of the plants.

2. Light: The growth of the Dutch iron is inseparable from sufficient light. In addition to the proper shade in the summer season, it must be placed under the sun at other times to allow it to be light all day.In addition, the plant also has a certain amount of negativeness. It can also grow in the semi -yin to receive scattered light. As long as it is not too dark, there is no problem.

3. Watering: The Dutch iron is more moist. During its growth, it must be watered frequently to keep the soil moist.However, we must avoid accumulating water. If you water too much, you need to discharge excess water to avoid affecting the breathing of the root.In addition, you can spray water appropriately to improve the environmental humidity.

4. Fertilization: Dutch iron requires a certain amount of nutrients in its growth season. Usually it must be supplemented with liquid Fertilizer twice a month. The Fertilizers must be thin. If thick Fertilizer is applied, it is easy to cause rotten roots.In this case, you can only get rid of the basin. After trimming the rotten roots, re -plant, wait for the plant to slowly recover and grow.

2. precautions for the breeding of the Dutch iron

1. winter warmth

Although the Dutch iron is negative, it also needs to keep warm in winter. Usually the Dutch iron is below 0 C, and its branches and leaves will gradually age yellow.Can be covered with a plastic film, maintain the temperature above 2 C, and unveil the film breathable every morning to make it better.

2. Pests and insect prevention

If the temperature of the Dutch iron grows is too high, it will easily suffer from leaf spots and other diseases, which will be harmful to diseases and insects. At this timePharmacy such as Tapintin, Kang Dan Dan.

3. Cutting breeding method of Dutch iron

Every time you give the Dutch iron cuttings, you should choose a branch of 10 to 30cm from the upper end of the plant during the growth period. Do not handle the branches and leaves.In the soil, pour water once a month and wait for one month to take root.

Long sunscreen matching technique long light sunscreen is more fashionable

1. Match demonstration: Pink purple short -sleeved long sunscreen jacket White T Shirt Light blue high waist denim shorts Black flat shoes White canvas bag

2. Matching demonstration: light blue long -sleeved long sunscreen jacket Short white letter pattern T Shirt Dark blue denim shorts Red -brown thick shoes Brown leather shoulder bag

3. Matching demonstration: white long perspective sunscreen jacket White cartoon pattern T Shirt Light blue high waist denim shorts Brown flat shoes White canvas bag

4. Matching demonstration: white and green stripe long short -sleeved sunscreen jacket White short Sleeve T Shirt Light blue high waist roll side denim hot pants Black thick bottom high heels Gray leather small shoulder bag

5. Matching demonstration: Gray pink sleeveless long sunscreen jacket Black print corset Dark blue high waist shorts black T Font flat sandals Black leather shoulder bag

6. Matching demonstration: white long sunscreen jacket White T Shirt Black wave dot high waist shorts Pink gray sneakers

7. Matching demonstration: long -sleeved sunscreen jacket in camouflage White top Light blue high waist tearing edge shorts White striped shoes

8. Matching demonstration: white stripe long sunscreen jacket Pattern vest White printed high waist tearing edge shorts Black leather Backpack Black thick sole tip slippers

9. Matching demonstration: Pink green perspective long sunscreen jacket White top Light blue high waist roll side denim shorts Light brown doll shoes Brown leather Backpack

10. Matching demonstration: black star long sunscreen jacket White V Collar shirt Light blue high waist denim shorts White flat slippers White leather shoulder bag

1. What is the size of Outdoor stools?

During outdoor activities, Outdoor stools are generally prepared for easy rest. There are many types of Outdoor stools, and different types of size will be different:

1. Outdoor folding stool

This folding stool is easy to carry and is very practical. It can be folded, which is convenient to hold it in your hands or put it in a bag.The standard size of the general Outdoor folding stool is 290*220*320mm.

2. Round stool

The round stools are diverse in shape, curvature, and it is also suitable for Outdoor use.The size of a circular stool for Outdoor is also large and small, high and low. The common diameter of the common round stool is 40-60cm, and the height is mostly about 50cm.

3, bamboo stool

bamboo stools are also very convenient for Outdoor use and are easy to carry. Its size is generally 240*180*240mm.

2. How much is the outdoor folding table

During the Outdoor Camping, in addition to the stool, it will also carry a folding table. Outdoor folding tables can generally be used as table and game tables. Its shapes and sizes are different.The

1, 6 people

You can refer to this size standard: Expand size: 1350*850*760mm; after contraction, size: 1000*850*760mm.

2, 4-6 people

The expansion size is about 1400mm*800mm*720mm.

3, 3 people

There are more Outdoor folding tables selected for this demand. Often, a simple and light folding table can be easily solved. The size of the lightweight folding table is: 1200mm*700mm*72mm.

4, 2 people

Expand the size of 1200mm*width 700mm*736mm, and the shrinkage size is 300mm*width 700mm*height 736mm.

5, 1 for people

The outdoor folding table for 1 person can choose more mini and more portable. The size is: 760mm 500mm 720mm to meet the needs.

The outdoor folding table is loved by consumers because of flexibility and portability. On the market, due to the different standards of different manufacturers, the size of the design is different and the shape is different. Therefore, there is no fixed standard. The specific size selection can ask the merchant.

3. How good the size of the Outdoor folding chair

If you want to be more comfortable for Outdoor travel, you can replace the Outdoor stool with the user's folding chair. The size choice of Outdoor folding chairs is also very important. Generally, there are different classifications and different size choices.The overall width is 50-60cm, the cushion is between 40-60cm from the ground (which can be lifted), and the length of the handrail is between 30-40cm.

In addition, Outdoor folding chairs need to consider travel methods in terms of size selection. If you travel by car, you will be more comfortable to choose a large -sized chair; but if you are on foot, you must carry them in the long -term Hiking process, then then you must be carrying them.Select chairs with smaller size and lighter weight after folding.

1. How to make creativity link

1. Link the bottle cap

Use the two vertical lines on the two sides of the bottle cap as the two sides, and keep the two vertical lines at about 1cm as much as possible. Then, use a knife to cut the bottle cap along the vertical line to remove the two pieces.After this step is done, two grooves will be formed on the bottle cap, and it is precisely these two grooves that can be used for Hanging things.Finally, the bottle cap is pasted and fixed on the wall. At this point, a simple hook is done.

Or I think it is only monotonous with a bottle cap, which is too simple, and you can also choose to add a few back -shaped needles.In this way, you do nt need to cut two pieces on the bottle cap to form two pieces to form things Hanging. Instead, the back -shaped needle is poured into a wire, and the tail is bent into a small hook.Put the back -shaped needle in, and then fix the bottle cap to the wall, and the hook is completed!

Although this hook is easy to do and the cost is very low, there is also a small defect, that is, it is only suitable for putting some small things, or some light debris, otherwise it will be easy.

2. hook branches

When you go to the Park to take a walk, you can pick up some small branches with a lot of branches, and then trim them into similar sizes, and then brush it on your favorite color.The screws nail them in a row.

It is firm and very high -level. No matter where you hang it, there is a natural charm, which immediately enhances the style of the home.And the hooks made of this are relatively strong, it will not fall easily, and there are more things that can be hung.

two,Wall linked DIY handmade tutorial

tools/raw materials:Small brush, a cup of water, paper towels, palette, tape, nails, hammer or screwdriver,Three colors of pigments, wooden knobs, and threading.

Method/Step:

1,Open the pigment box, freely match different colors, mix or alternately use.At the beginning, it is recommended that you start with a simple color.

2. Use a pencil to mark the part that is about to colored, and the tape sharing area.

3. Dig a little pigment with a small brush at the end of the brush and put it in the palette, and change the color by mixing with water or mixing with other colors.After digging out a piece of paint, clean the small brush, continue to dig the second color, and mix them.

4. When you make up your satisfactory color, you can start coloring. Mix the paint with a brush head with a pen and dip it out.

5. color according to the area marked.

6. Put the colorful knob on one side and clean the pen in the water.

7. After the pigment is dry, remove the tape.

8. Tort the threaded screw (actually matched with the knob) to the behind the knob until it is completely fixed.

9. Use a hammer and moderate nails on the wall to cut a small hole, or directly use an electric screw knife to hit a hole.

10. Fix the hooks that are done on the wall, and you can hang your favorite jewelry or clothing.

11. After the operation is skilled, you can make various colors and styles of wall linked, gradient, Pop, stripes, geometric patterns to choose from.

1. home Solar lamps, okay?

Solar Lamp is a new type of environmental lighting lamps. It uses solar energy as its main energy. As people's environmental awareness is strengthened, Solar lamps are used in major fields. Common Solar street lights and Solar courtyard Lights.How about the lamp?

Generally speaking, Solar lighting lamps are also better. On the one hand, its power consumption is relatively low, because it can collect solar energy. If it is rainy weather, it can also be used by the solar energy stored before, or the municipal power function; on the other hand, on the other hand, it can be used;The home Solar Lamp is also relatively safe. Usually, 9V voltage is used to power, and there will be no errors to touch the lamp head and electric shock.

Solar lamps have two types: split type and integrated. Generally, families are more suitable for using integrated Solar lamps. Although the efficiency of solar energy may be less efficient, it is more convenient.

2. How to install Solar lantern hives

The family uses Solar lamps must be installed first. The installation of home Solar lamps is divided into four parts: battery board, battery, controller, and wire. The specific installation method is as follows:

1. Install the panel

Determine the tilt angle of the battery board according to the local latitude and other to ensure that the battery board has sufficient Solar irradiation.After determining the angle, fix the bracket at the position of the Solar light, and fix the battery plate on the bracket.

2. Install the battery

According to the design requirements, dig the box pond well, and put the buried box with the battery into the pool, lead to a wire Tube, and cover the cement board.Before putting the battery in the ground box, you need to determine whether the battery is intact. It is usually recommended to put in the same model and the same specifications and connect the battery in series.The burying boxes need to be used for glue, and the protective Tube is tightly fixed.

3. Install the controller

The controller generally uses a special controller of Solar power supply. When the connection is connected, connect the wiring terminal of the battery on the controller, and then connect the photovoltaic panel wire wire, and finally connect the load terminal.Be sure to pay attention to the battery, photovoltaic battery panel, load,-extremely cannot be connected, otherwise it may cause short circuit.After connecting the line, place the controller in the lamp column and fix it with bolts.

4. Pay the wires

Put the lamp head on the lamp arm, adjust the irradiation angle, and tighten it with the screw.Connect the lamp head line with the Solar panel and tighten the waterproof joint.After receiving it, test whether the Solar Lamp can be used normally, and it can be put into use normally.