Suitable health foods for hamsters:

1. Bread worm: Formerly known as yellow powder insects, because of the favorite bread, it is also called bread worm.The nutritional value of bread insects is very high. The protein content is 47%, the fat content is 23%, and the carbohydrates are 23%. The nutrients are comprehensive. They are the first of various animals and plants.However, its twisting insect attitude feels more disgusting and makes many people discouraged, but the hamsters really love to eat bread worms.

2. Dried bread worm: It is the noodles that are air -dried, and their nutritional value is still very high, but the deterioration facial drying during the air -drying process can cause the risk of hamsters to get sick.There are also rats on the Internet that the method of high -temperature heating and disinfection in the microwave oven to avoid this risk is really worth trying.After all, holding the dead face is easier to accept it than holding the alive face, but also remind you that if you eat more hamsters, the urine will stink.

3. Boiled protein: Boil the eggs with water, without any flavoring agent, wait for the eggs to eat the protein part of the hamster.Personally, I feel a bit wasteful, because a hamster can't eat much, and the cooked eggs can't save much time. It can only be said that it is more suitable for the rats with more rats at home.

4. Milk slices: The white, round -like coins are sold on the market.I have tasted it, and I feel that pure Milk powder melts and does it. It is very sweet.When the hamster was eating, it felt like to use the tooth to pour Milk powder on the surface of the milk tablet.Personally, I think that when I use Milk powder, put into the oven into a small milk block to replace the milk slices on the market.

5. Cheese: Generally, you can buy it in the supermarket, but it is recommended that you only buy the original pieces to eat it for hamsters. I have tasted it. It is very salty. It is not recommended to eat new babies, which may cause dehydration to death.Every time the hamster eats a lot, the rest must be put back to the refrigerator in time.

6, egg white: Generally, I will take the remaining eggshells after cooking.Take away the eggshell, and the tip of the eggshell when moving at high speed is still scratching.

7. Small fish dried: This refers to the dried fish dried in the market on the market. It is also super salty. It is strongly not recommended to eat newborn babies.Adult hamsters are not particularly loved, and there are not many feeding between rats.

Having a sailing boat means to have a city -state that lives independently and freely at sea; with a sailboat, you can enter a port of any port on the sea ...Some people who get up are not an excessive price.However, so far, the sailboat is still a game that is only played by a small number of people in Mainland China.

1. Sailing equipment

As the so -called work is good, we must first benefit its instrument.When it was really going to sea, there was no professional sailing equipment.Due to its special environment, the sailing movement needs to be armed throughout the body.Sailing clothes, ropes, sunscreens,Sunglasses... Every detail may affect your progress of learning to control sailing.Therefore, don't forget to check the equipment before boarding the Ship.

Voyage

The weather on the sea is easier to change than the shore, so it is very important to wear and equipment correctly in this sport.You don't have to spend a lot of money on the equipment. Here is some simple guidance for your basic equipment:

Wear loose clothes.It takes a lot of movements to operate the sailing boat, so wearing can give you enough clothes for you

Carry extra clothes in luggage Bags.In order to add clothes or wet water when cold, you can change your clothes.

Wear light and breathable clothes in hot days.It is best to wear light -colored clothes. The clothes you lead can protect your neck from exposed to sunlight. The clothes with long sleeves can protect your arms from exposed to sunlight.

Use sunscreen (SFP15 or higher) to protect your Skin, and even so on a cloudy day, it is best to apply it frequently.

Wear a hat to protect your eyes and make your head from being shined with sunlight.In cold days, wearing a hat can warm the head.

Wear Sunglasses (at least 90%).Polarized mirrors can greatly reduce the dazzling feeling of water.

You must wear anti -slip shoes.In order to stand on the slippery deck.tennis shoes that are not broken sole will be a good choice. Of course, sailing shoes are the best choices, because the soles of the sole

The rubbing force is very large and dry very fast.Don't wear sandals or other toe shoes, sooner or later you will hurt your toes.

waterproof navigation boots will keep your feet warm and dry in cold days.

Daihang sea gloves can prevent your hands from being scratched and increase friction.It is best to wear waterproof gloves in cold days.

Lifeline is a must -have equipment for navigation.The life jacket should be fitted and has quality assurance.

Wear a few more layers in cold days.When you feel cold, your operation skills will be greatly affected, so wearing a few more clothes is a wise choice.Avoid wearing cotton clothing, wear

Clothes that can still keep warm after wet, such as cortex or polyester fiber clothing.Dedicated cold prevention clothing, dedicated cold -proof clothing can keep you warm and dry in bad weather.There are several styles to choose from:

Standard two -piece set, including a waterproof jacket with a hat pocket and an independent suspender pants.

Conjusational clothes will make you more dry, but you cannot take off your shirt or pants alone to adapt to changes in temperature.

On some particularly humid ships, crew members often wear wet warm clothes similar to divers.

Dry -style warm clothing is a suit that allows you to isolate water. They seal your neck, wrist and ankle tightly.They can prevent water and keep warm.

Safety equipment

In addition, there should be complete safety equipment on the sailing.Safety equipment not only protects Ship equipment, but also protects individuals. The crew must know the location and correct use of these equipment in order to prevent accidents during the movement.Sailing needs to prepare the following safety equipment on sailing on the shore:

Safe vests -Each person must have a qualified life -saving vest, and children must prepare special size life vests for them.

Life Rings -placed on the Ship that is easy to get on the boat, and once someone falls into the water, it can quickly throw it into the water fall.

FIRST AID Kit -Applicable first -aid drugs and items.

Bilge pump -manual or electric pump, which can quickly discharge the chamber water.

Bucket (bucket) -The rope of about two meters can be used urgently when the cabin is in water.

In addition to the above, if you want to travel long, you can also prepare excess anchor cables, waterproof flashlights, fire extinguishers, Gangpu, Haitu, signal bullets, wide -leaf short paddle, drainage equipment, horn, compass, sufficient water, knife, pliers, pliers, Screws, rolls and other tools to prepare from time to time.

First boarding

For the first time to board the Ship, pay attention to boarding etiquette. First of all, the captain's consent can only be boarded, just like invited to enter the house of others.When boarding the Ship, you should be very careful, especially when you are low tide, use a ladder or connect to the large boat by a small boat or a small boat. When crossing the side cable, you should cross the back to maintain the center of gravity of the body.Proper locations and prevent the hull of the hull may move into the water.

The sailing club often keeps tilting or suddenly unpredictable, especially for beginners who are not accustomed to activities on the tilted Ship.The string cable, the top pole of the cabin, or any fixed devices on the Ship can help you stand firm.When walking around, the body is slightly bent and walks, keeping the center of gravity, and be careful not to hit the horizontal pole or let it hit you.Walk on the deck to keep on the upper side for safety.

2. Small boat site and instructions

1. Former sail (jib): sail used in front of the main mast.

2. HeadStay or Forestay: The top of the mast can be pulled forward to the front boat, and the steel cable on the front sail can be buckled.

3. SHEET: The main control of the rope can be released or tightened and fixed. This picture refers to the front sail.

4. Mainsail: The largest sail that is raised after the main mast is also the source of the main power of the entire sailing boat.

5. Battens: The flat bars inserted from the back edge of the sail, in order to maintain a good sail shape.

6. MainSheet: Rope to control the angle of the main sail.

7. Boom: elongated, used to fix the bottom of the main sail.

8. BOOMVANG: The cable tightened or supported by the sail truss to prevent the sailing truffle up.

9. Mast (MAST): The long rods made of wood or aluminum are supported by steel cables for lifting and stretching sails.

10. SHRouds: The tension used to fix the side of the mast.

11. Centerboard: Under the hull, you can adjust the depth of water (mainly axis -based heart, front and rear lift).

12. Rudder: The device used to control the Ship in the direction.

13. Boat (BOW): The front of the hull.

14. Stern: The last part of the hull.

15. Hull: The shell of the Ship.

3. Preparation before playing sailing

1. Operation basis

(1) Look at the basic knowledge of sailing, understand what the sailboat is driving, and see the relationship between the wind, sail and boat in all directions, see the basic chapter of the sailboat in the forum technology post.

(2) Keep in mind the basic guidance and safety reminder of the teacher before launching. Sailing is a sports Tool with safety knowledge, including wearing a life jacket to understand the use of safety equipment. Pay attention to the difference between the boat and the big boat from the preparation of the Ship on the dock.To control the balance of the boat and your own center of gravity, it is generally necessary to quickly move the Ship to move the center of gravity to the center of the Ship to avoid the boat cover.Check whether each rope is in normal state.

(3) After boarding the Ship, pay attention to lift the sails because of the cooperation, and the boat can generally rise on the shore.

(4) After sailing, safely leave the dock.To judge the direction of the wind first, you can generally judge through the wind direction indicator on the boat or the wind line tied to the side branches. Generally, the range of 45 degrees in the direction of the wind is the range of 45 degrees.Sailing, of course, to adjust the angle of sails from the perspective of wind.

(5) After a period of familiarity, we can master the basic operation of the former sails, and start learning how to take the helm. The boat we learn is the rudder of the pushing rod. It is more sensitive than the rudder wheel.Basic driving in turn to understand the relationship between wind, front sail, main sail, main sail, Ship's order and rudder's sense of rudder, and can basically understand the basic essentials and feelings.

2. Important angle

(1) Wind direction angle: The term for sailing motion sailing, refers to the angle between the wind between the end of the same sailing boat.The motivation of the sailing Ship mainly depends on wind power.And the size of the wind direction to the promotion of sailing is very important.Athletes must correctly grasp the wind direction and angle in order to fully use the wind to drive sailing.

(2) Different wind direction angle divide the degree

The wind direction angle of the top wind is between 0 degrees and 30 degrees; the wind direction angle of the front wind is between 30 degrees and 60 degrees;At 80 degrees 1 100

Between degree; The wind direction angle of the Smooth wind is between 100 degrees and 170 degrees; The wind direction angle of the tail wind is between 170 degrees and 180 degrees.

3. Sailing knot

Since ancient times, skilled use of knots is one of the very important sailing skills, because it will save the life of the crew.Different use cables use different materials.Due to the high tensile strength, nylon rope can be used as anchor rope or a boat rope.Dakun has little resistance and can be used as a flag rope or main sail.Polypropylene can float and can generally be used as a tie rope.

(1) Single knot.The wide range of uses can prevent loosening.

(2) Lilac knot.It is not a very strong way of knotting, which can be used as a short -term link.

(3) 8 -character knot.Used for the top of the flag rope or main sail.

(4) Rolling knot.Used to connect with coarse cables.

(5) Horn knot.Used to connect the cable angle of the same system.

(6) Two halves.Used for the same column, ring, etc.

It is also important to exercise the skills to handle cables.First of all, take the cable carefully.Before handing, the disk is divided into two parts.When throwing the smaller part of the cable, you need to keep the hand shape so that the other half of the cable is naturally pulled out in the other hand.

Recommended reading

[List of Outdoor equipment] Models that the must -have for outdoor sports must know

What are the gliding umbrella sports equipment? What should I prepare?

What kind of off -road Running equipment list is needed for Outdoor off -road Running

Outdoor cave equipment list, cave cavity equipment Daquan

1. Water drops parameters and performance

The parameters of water drops mainly include speed ratio, bearing number, braking power (maximum tensile force), maximum line length, line cup capacity and self -weight.

1. Spearba

Also known as the gear ratio, it refers to the number of rotation circles that rotate the line cup when shaking the rocker with a hand -shaking arm.The higher the speed ratio, the faster the closing line is used, which is suitable for use when the target fish is quickly searching for the target fish, but the risk of hook obstacles may be used in waters with more obstacles.

2,Bearing number

It affects the smoothness and durability of the wheel. The more the number of bearings, the smoother the rotation of the wheel.

3. brake force

Refers to the maximum brakes that water drops can generate, which is a key factor in controlling fish wires and preventing fish from Running away.

4,Maximum line length

The rocker handle the hand around and the fish line length on the online shaft.The maximum line length is affected by two factors, the size of the gear ratio and the line cup.

5.Wire capacity

Refers to the amount of lines that can be accommodated by the water drop wheel cup, which determines the length of the line that can be used in a fishing process.

6.Self -respect

The weight of the water drop wheel itself is measured by gram.

2. How to choose Luya Drop Wheel

1. Speed selection ratio, bearing number, capacity line capacity

Novice speed ratio (5.3: 1), (5.4: 1), (6.3: 1), (6.4: 1), the higher the number in the rotation number can retrieve the larger water area.

The number of bearing is about 4 1, the more the bearing is not as good as possible. The 4 high -quality bearing is far better than 10 inferior bearing.

The capacity of the container is 150, and the common capacity of freshwater fishing is between 50-200. Black Leiqiang will use 200 and more than 200 tolerance for sea fishing.

2. Choose fishing method

Getting water drops: heavy bait hard rods, more capacity lines, far away.

Big objects and water drops: throw heavy bait and hard bait, there are many tolerance, and violence is tough.fishing sea bass, black fish, catfish, catfish, Dog fish, etc.

Micro -material water drop wheel: throwing small bait, fine line soft rods, less capacity lines, sensitive lightweight.fishing mouth, white bar, pony, catfish, catfish, etc.

Passing of water Drop wheels: strong generality, leisure fishing, novice use.

The pan -use type is the characteristics of the long -range micro -objects. The concept of the novice concept is currently not currently upgraded according to the combination of the target fish punctuation based on the target of the target.

3. Selection performance

It mainly depends on the design of the mechanical transmission system and the main structure.Test, unload, fine -tuning knobs, brakes, rockers, poles, etc.

Balance: Rotate the handle, and the wheels are stable and have no abnormally shaking.Rotate without eccentricity, no shake.

Hand sensibility: The mechanical parts are good, and we often say smoothly.On the contrary, the hemp jumping, the difference between the anastomosis, the internal vibration conveyed the grip and its fishing rod.

How to choose wooden floor moisture pads

1. Look at the type of floor mat

1. Ordinary floor mat

The most widely used is ordinary floor mats made of polyethylene, which is low in cost.The difference in quality is mainly due to the thickness of the ground cushion and the material used on the surface.When you buy it, you can see its toughness, and the toughness of good floor mats is also very good.

2. Aluminum film pad

Aluminum -film pads are generally pasted with aluminum foil on the plastic floor pad, which is relatively well -sealing and moisture -proof.When purchasing the aluminum film pad, pay attention to whether the aluminum film and plastic film on the surface should be tightly bonded. The aluminum film of the good aluminum membrane pad is not easy to fall off.In addition, it is necessary to pay attention to its environmental protection. Before installation, you can open the rolled ground pads. Whether there is any irritating smell when you smell it. If so, you must refuse to use it.

2. Look at the thickness of the ground

The floor mats should not be too thick, usually around 2mm.If it is too thick, the room has a large room for a lot of time, and it is easy to cause the floor to be arched and cracking.

Third, look at the brand

The quality of the product of large brands is often guaranteed, after -sales service is good, the production process technology is mature, the price is also reasonable, and the national supervision is also strict. Consumers can buy suitable wood flooring pad products according to their actual needs.

What should be paid attention to when laying wooden floor moisture -proof pads

1. The keel is solid on the ground to be flat

The ground is not tidy to hang some flooring and keels, and the floor is easy to make a noise.If the wooden keel is not strong, it is easy to produce the same situation, so you must check it after the wood keel is paved.You can get your feet on the wooden keel. You can check whether the wood keel is firm by shaking your feet. If it is not enough, you need to reinforce it.

2. Pay attention to keel and floor fixed

The fixing method of using wood wedge and iron nails will cause insufficient grip power due to the small contact surface of the wooden wedge and the iron nail, which can easily cause the wood keel to loosen, and it is easy to have no sound when walking on it.The fixation of the floor and the wooden board, if it is not rail pavement, it needs to be fixed with nails.The selected nail is best for the special thread of the floor. Drill the hole with a pistol first, and then fix it.

3. Dragon must be dry and moth -proof

Generally, the water content of the Solid wood flooring is 12%. The wooden keel must be dry, so that the wooden floor will be rapidly moisture due to the large humidity difference, resulting in the arch of the floor arched and the paint surface burst.The Solid wood flooring has a good logic and is prone to raw pests. Therefore, it is necessary to put camphor wood chips in the wooden keel. The standard is to put a thousand grams of camphor wood chips every 8 Square meters. Pay attention to put it evenly.

4. Pay attention to color difference problems in advance

The color of each Solid wood flooring will be different, so before the formal layout, choose a floor with similar colors and textures to make the overall pavement effect.It should be noted that when the floor enters the field, it is best to check the quality of the floor by touching and visually inspecting. If you have any problems, you can find and change it in time.

5. There are a lot of moisture -proof pads

In order to avoid the water and gas on the wall to "infect" the Solid wood flooring, when laying a moisture pad, it must not only cover the entire wooden keel, but also pay attention to leaving about 10cm up along the corner of the moisture.At the same time, 8-12cm telescopic joints should be left between the wooden floor and the wall surface. If it is too close, it is easy to arched after the floor expands.

6. Do not forget the flooring of flooring

After paving the first row of floors, the installation staff should prevail through the straight line. If you need to adjust it immediately, it will affect the launch of the floor of the floor.There are no gaps in the middle, to ensure flatness.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[GPS positioner tracker] How to install the installation method of automobile GPS positioner, how to install the GPS locator

The installation method of car GPS positioner

Many novices for the first contact with the GPS locator of the car, which is unknown to the installation of GPS, which has led to the disorderly installation, causing the product function to be incompletely realized, or the accuracy of the positioning is not as described as the manufacturer, which affects the wiring problem.What to do if you can't wiring.There are the most comprehensive introductions below.

1. Finding method of power cord

The electric source line is generally found in the inside of the decorative board under the steering wheel and the central electrical box wire beam. It is directly connected to the positive electrode of the battery when conditions permit.The DC voltage of the normal work of the car is 10 ~ 36V.The power cord has electricity in any state in any state.

Finding method: Pull out the key, find the thickest thicker, use the test light (or test pen) to use one end of the iron, and the other end to test on the connector of the line.If the test Lights are always bright, it means that the line is the power cord.

2. Finding method of ACC signal line

The ACC line is generally found in the inside of the decorative board under the steering wheel and the central electrical box line.The ACC signal line is the main basis for the host to determine whether the vehicle is in a starting state.

Finding method: Find a thicker line in the ignition switch line, use the test light to use the iron end to the iron, and the other end is tested on the connector of the line: when the ignition switch is hit to the "ACC" or "ON" file, the test Lights are bright;After turning off the ignition switch, the test light is destroyed. This connection is the ACC line.

3. Finding method of turning to the light line

The turning light line is generally found in the inside of the decorative board under the steering wheel, the central electrical box line beam, and the left and right front door inside line.Most models are left and right lines, but there are also very few models divided into four lines of front, rear, left, and right.

Finding method: Because the colors of the left and right Lights of small lamps, brake Lights, and reversing Lights are the same, they can be combined at the front and rear Lights to compare the color of the left and right lines to find the turning light line to see its color and size.Find the same color line.Use one end of the test light to take the iron and the other end on the line. When turning on the left or right turning light switch, use the test lamp to try this line.Light line.The other way to find the light line is the same.

Note: The turning light lines of some models (the turning light controlled by the module) cannot be confirmed on the wire beam under the switching of the turning light, and it can only be found in the same way in the central electrical box wire beam and the left and right front door beams.For models controlled by the front and rear turning Lights, it is recommended to connect the lines of the rear turning light to the line of the original car.This wiring method is settled by defense, and only the back to turn on when the defense can be turned on.

4. Finding method of the brake line

The brake line can be found at the brake light switch above the foot brake.

Finding method: Find the brake light switch, use one end of the test light to use the iron, and the other end at the switch joint.One of the lines should be constant electricity, and the other has electricity after stepping on the foot brake, and the line that has no electricity after loosening the foot brake is the brake wire.

5. Finding method of oil -breaking wires

The car oil wires are connected in the oil pump positive line.The characteristic of the positive line of the oil pump is that the ignition switch is hit to the "ON" gear. When the vehicle is not started, the line has a short period of time for 2 to 3 seconds, and then returned to the initial state of the powerless.For positive electricity.The purpose of the original car design is that before the engine starts, there is a standard oil pressure in the oil pipe, but it also prevent the ignition switch from being in the "ON" file for a long time, and the vehicle is not started to burn the oil pump.Oil pump positive lines can generally be found in the fuel tank, left or right front door beam, and central appliance box.

Finding method: Find a thicker thread in the online beam, use one end of the test light to use the iron, and the other end to test on the connector of the line.When the ignition switch is hit to the "ON" file, and the vehicle is not started, the line has a short time positive electricity for 2 to 3 seconds, and then returned to the initial state of the non -electricity;The root line is the positive polar line of the oil pump.

6. Finding method of Akmen signal line

The tailgate signal line is connected to the tail gate control switch line. This line can be found in the rear tail box, left or right front door line.Generally, vehicles have two wiring methods: positive and negative trigger.When the tailgate is turned on, the tailgate trigger line is positive electricity. When the tailgate is turned off, the tailgate trigger line is not electrical.When the tailgate is opened, the tailgate trigger line is grounded. When the tailgate is turned off, the tailgate trigger line is a positive electrical situation.

Finding method: Find the tailgate trigger line at the tailgate trigger switch, see the color and size, and then use the test light to use the iron end to the iron, and the other end is tested on the connection of the line to see if it is triggered or triggered.Then in the inside of the car, find the same color line, use one end of the test light to set up the iron, and test the line on the other end on the connector of the line.

7. Finding method of the side door signal line

The side door signal line is connected to the door control switch line.You can be found in the left and right front door beams.The original car door control switch line has two trigger methods: positive trigger and negative trigger.In addition, the original door control switch line also has two types of wiring methods: the four door control switch line connects the traditional wiring method and uses module control.Way.

Finding method: For the traditional wiring method connected to the four door control switch lines together, it can be directly connected to a single door control switch line.Look at the color and size of the door control switch line at the door control switch, and then find the same color line in the front door line.Use one end of the test light to take the iron, and the other end is tested on the connection of the line: When the side door is opened, the side door trigger line is electric. When the side door is turned off, the side door trigger line has no electricity.When the side door is opened, the side door trigger line is grounded. When the door is closed, the trigger line of the side door is a negative trigger.

For models controlled by modules, they are divided into two types of old models without original vehicle anti -theft remote control and new models with original car anti -theft remote control.The model without the original car anti -theft remote control can be connected to the control ground line connecting the indoor light to the control module.When the door is open, the indoor light is turned on by controlling the module when the door is turned on; when the door is turned off, the line is not grounded after the interior Lights are extinguished by about 20 seconds.A model with the original car anti -theft remote control should be installed with four diode (1N4001) connected to the four side door switch lines.The secondary pipe positive poles are connected to the side door signal line of the car, and the negative poles of the diode are connected to the four door control switch lines.

The voltage on the door control switching line is low. It is necessary to measure it with a multimeter and test Lights at the same time, and the results obtained are relatively clear.

8. Finding method of speaker cable

The speaker cable can be found in the inside of the panel, the central electrical box line and the horn under the steering wheel.There are four ways to connect the original car horn.

A turn off the ignition switch speaker can still be sounded, and the speaker relay controls the speaker cable (positive, negatively triggers to select one);

B The ignition switch speaker can still be rang, and the speaker relay controls the speaker ground line (negative trigger);

C can only press the ignition switch speaker to press the sound.

D can only press the ignition switch speaker, and the speaker relay controls the speaker ground wire