1. High installation of clothes hooks

1. Xuanguan

You can judge according to your family's height, so that everyone can get items. Generally, it is better at about 1.6 meters.It should not be too low, so you need to bend over with things, and if the clothes and buns are too long, you will mop the floor.

2. bedroom

Like in the porch, the height is more convenient to get items. Now there are coat hooks that can be hung directly at the top of the door, and the door of the bedroom will not be particularly high, so as long as you do not install too low.It is recommended to be a little taller than yourself, so as not to accidentally hit the hook.

3. bathroom

The installation height of the bathroom hook is also very important.Generally speaking, the installation height of the bathroom hook can be determined according to the height of the family, usually with 10 mm on the basis of the minimum member height.Such height will be more convenient when using a coat hook.You can also install the hook on the right side of the mirror to make the towels more comfortable and convenient.

2. How to install the hook

1. Positioning

The installation position of the hook must be determined, including width and height.There are single -clothes hooks and row hooks. When installing a single hook, a few clothes hooks are usually installed into a row of combinations. ThereforeThe width of the installation surface is reasonably calculated, and the distance between the single hook is divided to ensure the beauty after installation.The rowing hook does not have a width trouble. As long as the width of the installation surface is sufficient, it is generally installed in the middle position, so that the distance between the left and right sides is equal.

For height, it refers to the height of the hook from the ground. Generally, the height of the family is used as a reference. It is advisable to be about 1.5 meters to 1.8 meters.Beautiful; if it is too high, you need to stomach or step on a small bench to hang, so it is inconvenient to use.Therefore, the installation position of the positioning hook is very important.

2. Pole

After determining the installation position, it is best to draw the hole position with a marked pen, and how many holes are needed.Then use an electric drill to punch.However, pay attention to the size of the hole, and generally refer to the size of the hole on the hook.

3. Fixed

After the holes, you can put the expansion bolt into, or the wooden pillow, and determine the corresponding bolt according to the material of the coat hook.Then align the hook to the bolt, and finally use the screw to tighten and fix it.However, when the screws are screwed, pay attention to the flatness of the hook, which must be kept horizontal with the ground, and it must not be skewed, otherwise it will affect the effect of the clothes hook and the beauty of installation.

[Triangle of the bathroom triangle shelf] The installation of high degree of bathroom triangle rack installation method

The installation height of the triangle of the bathroom

The bathroom shelf is a household item that many families will use. Nowadays, people will use space very much. In modern life, people will place cosmetics in the bathroom, as well as toothpaste, toilet, and bath milk, shampoo, shampoo, and shampoo.There are countless small objects such as facial cleanser, hairpin, toothpaste, etc., often making the bathroom very messy, so the role of the bathroom corner frame looks particularly important.It can save our bathroom space very well, bringing neat and comfortable to the family.Many people will ask, how much is the fitting height of the bathroom rack installation. In fact, its installation height is not fixed, mainly because the height of the family is determined. Generally, between 1.3 and 1.5 meters is the most suitable one is the most suitable one.Essence

The installation method of the triangle of the bathroom

1. First of all, we must find the right position on the wall, and then punch the perforation on the determined position. When punching, we must follow the width of the corners.To determine the height, you must consider where everyone is convenient for everyone;

2. After we beat the holes, use the hammer to knock the plastic Bags with a hammer and knock on the holes that are packed on the wall and remove the remaining part;

3. After doing the above steps, we will install the pendant of the bathroom shelf, remove the pendant base fixed block, and fix it with screws;

4. This step is to put the main body of the pendant into a fixed block, and adjust the position appropriately until the location is suitable, which must be beautiful and convenient;

5. To do this step, even if the rack is basically installed, the last step is to tighten the screws with a wrench and fix it.

The purchase of the triangle of the bathroom

1. Generally speaking, the space of the bathroom is very small. In order to save space, it is important to choose a rack suitable for the angle of the bathroom corner. Generally speaking

2. The layer of many strokes is the best. We can choose, three layers or more layers of corner frames, so that according to their own use habits, small bathroom products are placed in different categories;

3. There is also the best choice of corner frames with strong load -bearing capabilities, especially Hanging walls, and be sure to pay attention to its load -bearing capacity;

4. The last thing to note is that the buying rack is best to clean. When choosing a corners, try to choose some corners as little as possible. It is more convenient to clean and it is not easy to accumulate.

5. The material of the bathroom shelf must be reliable, including the material of the bracket and the shelf must be good, and it cannot rust and deform in a humid environment for a long time.This generally uses a bathroom shelf made of stainless steel or alloy.

1. How to install the rack on the wall

1. Prepare the tools, the most important thing is to prepare an impact drill.It should be noted here that according to the size of the expansion screws, choose the drill of the largest one.

2. First, the rack on the wall is compared with the approximate position, then take the height and the pore distance with the tape measure, and mark it with a pen.

3. Use the impact drill to punch the place where the mark is made. It should be noted that when punching, the hole eyes need to be slightly up towards it to avoid the rack tilted down because of gravity.

4. Then put the expansion screws in the hole, and fix it with a hammer.Different types of expansion screws are different. You can search the Internet online to find the specific one for you.

5. Insert the rack into the fixed screw, and complete it.

2. Principles of installation of racks on the wall

1. The installation of racks on the wall should follow the principle of convenience and practicality.When installing the rack, you must take into account the entire layout and daily life habits, such as installing the frame on the wall in the kitchen, and consider the place where the wall is installed on the stir -frying place.

2. The installation of racks on the wall should abide by the principle of saving space.The kitchen and bathrooms are relatively small in our family, so the installation of the shelf must save space and make reasonable use of our space.

3. The installation of racks on the wall should be classified clearly.There are many types of shelves on the wall, and different places with different positions in home are installed in different positions, so that they can "perform their duties" in order to make home life methodically.

3. Tips for installing racks on the wall

1. New masonry wall

Put the metal components in advance in the wall, set the grid plate, or stabb the eyes on the side of the thick plate, or the carpenters are fixed according to the component to make the decorative conclusion stable.

2. Decorative frame on the wall

First, the steel bars are inserted on the wall, the decorative frame is set, or the thick plate is stabbed into the eye, or the carpenters are fixed according to the component, and the decoration cannot be disassembled.

3. Heavy decorationTaste

The wall is fixed with a fixed -angle steel frame such as expansion bolts, a decorative frame, or a carpenter fixed according to the component. The corner steel frame is a bit ugly. It can place items such as books. The book can be used to cover the oblique support.

4, cantilever bracket

Purchasing the iron bracket of the product may be a dedicated fixed frame, the wall is eye -catching, and it can be fixed with plastic bolt or woody wedge and wood screws. The glass decoration frame can be used. The cost is slightly higher, but it is very beautiful and beautiful.

How to install the kitchen corner rack

1. Prepare tools, the most important thing is to prepare a shock drill.It should be noted here that according to the size of the expansion screws, choose the drill of the largest one.

2. First compare the rack to the approximate position, then measure the height and the hole distance with the tape measure, and use the pen to mark it.

3. Use impact drilling.Installed alone.

4. Put the expansion screws in the hole and fix it with a hammer to fix the expansion screws.Different types of expansion screws are different. You can search the Internet online to find the specific one for you.

5. Insert the rack into the fixed screw, it is OK.

6. It should be noted that the hole eyes need to be slightly upward when punching, avoiding the rack tilt down because of gravity.

The corner of the storage corner is light and convenient. The installation is simple and easy to use. It can be used in many places such as office and warehouses. It has a good effect on the finishing of items. It does not take up space. The design is reasonable and conforms to the three -dimensional structure.

kitchen corner shelf daily cleaning method

1. You can use cotton wet cloth with toothpaste and soap, gently wipe the kitchen corner shelf, and then wash it with water.

2. Because the long -term residues of chromium -plated surfaces such as various washing, shower gels, etc., will make the surface of the kitchen corner shelf degenerate and directly affect the surface quality.Please clean the surface of the kitchen corner rack at least once a week, and it is best to use a neutral cleaner.

3. You can use wax oil with strong decontamination capacity, apply it on a clean white cotton cloth to thoroughly clean the entire kitchen corner stand. The cycle is generally 3 months, which can extend the life of the kitchen corners.Remember that every time you clean, you must dry the water stains, otherwise water stain dirt may appear on the surface of the pendant.

4. For the stubbornness, surface dirt film and stains that are difficult to remove, please use mild liquid cleaner, colorless glass cleaning solution or polished liquid without wearThe shelf is dry with a soft cotton cloth.

After a brief introduction of the above content, everyone should have the kitchen corner racks, and understand more in detail.The kitchen corner shelf is generally installed in the corner position, that is, its shape is 90 degrees, so it is more convenient for people to use in space. Of courseDifferent service life, in the process of using the kitchen corner rack, it is necessary to regularly clean it, which can enhance the aesthetics of the kitchen to a certain extent. I hope that the above content will help everyone

What should I do if I can't suck the suction shelf

1. Dip water

The main reason that causes the suction shelf is often on the plane. When there is dust on the wall or mirror surface, it will cause air leakage to the inside of the suction cup.Impurities exist.At this time, you can dip it in water, or use hot water to soften the suction cup and stick it. Remember to slowly press out from the middle to the surroundings to drive out the air, but be careful not to blame the suction cup and deform.

2. Put the egg white

Separate the egg white in the egg from the egg yolk and apply the egg white to the inside of the suction cup with a cotton swab. Remember to be uniform, and only a thin layer is enough.After going up, the egg white is completely killed. It takes almost 12 hours to work. At this time, the suction cup is firmly fixed on the wall, and it will not fall off anymore.The principle is that the egg white contains glue, which can help the suction cups better adhesive and the contact surface, and the glue fills the gap and squeeze the air, so the suction cup will firmly suck on the wall.

3.

Use toothpaste to replace the egg white can also have the same effect. Squeeze out an appropriate amount of toothpaste and apply it on the back of the suction cup, and then stick to the corresponding position. When the toothpaste is almost combined with the hookThe effect of water and soapy water is much better.

4. Wipe it with alcohol

A large part of the suction cup folded is that the position of the paste is not handled clean. Wipe it with alcohol and remove the dust, so that the paste will be firm.

How to install the suction shelf

1. It is best to install the wall with a Smooth plane;

2. Dry the wall with a dry cloth;

3. Press the suction cup to the wall from the middle to the surroundings;

4. Then wait for a while before use.

How to remove the suction shelf

1. If the glue is hard (such as AB glue), it can be heated with a hair dryer with a hot air. After softening, use the knife to remove it.

2. If the glue is soft, cut it directly with the artist knife.

3. If the glue is relatively thin and there is no thickness, you can use the fish wire to be removed. Use a wet rag (rough) to add a cleaning agent a few more times.