1. How to use Solar lamps

According to the principle of Solar lamps, Solar lamps are powered on during the day and light at night.The specific Solar Lamp working principle is simple. For Solar cells made of photocopyral effect principle, Solar panels during the day receive Solar radiation energy and convert them into electrical energy output. The charging controller is stored in the battery.The left and right, the voltage of the opening of the Solar cell board is about 4.5V. The charging controller detects the voltage value after the voltage value is detected, and the battery discharges the lamp head.After the battery is discharged for 8.5h, the charging and discharge control action is over, and the battery discharge is over.The main function of the charging controller is to protect the battery.

2. How to install Solar lamps

So how to install Solar lights by yourself?The method of installing Solar lamps is very simple. Just choose the right position and install it directly. The specific steps are as follows:

1. First choose Solar silicon boards.Select the size of the Solar panel according to the area or brightness requirements.

2. Then configure Solar lamps.Generally, it is better to choose LED lights. It uses low voltage, small current, and good light emitting effect.Compared with energy saving.It is recommended to choose a Solar Lamp with a special battery.

3. In terms of installation, the Solar panel is installed outdoors, and the sunlight should be received.The time to install the sunlight also determines the effect of the Lights.

4. When installing Solar panels, pay attention to waterproof, and try to install it at a high place, so that rainwater should not be soaked.

5. Share a small tip here is to place a thin transparent ordinary glass on the Solar board.This prevents the rain from getting wet directly and can effectively block the sun.Extend the service life of Solar panels.

1. home Solar lamps, okay?

Solar Lamp is a new type of environmental lighting lamps. It uses solar energy as its main energy. As people's environmental awareness is strengthened, Solar lamps are used in major fields. Common Solar street lights and Solar courtyard Lights.How about the lamp?

Generally speaking, Solar lighting lamps are also better. On the one hand, its power consumption is relatively low, because it can collect solar energy. If it is rainy weather, it can also be used by the solar energy stored before, or the municipal power function; on the other hand, on the other hand, it can be used;The home Solar Lamp is also relatively safe. Usually, 9V voltage is used to power, and there will be no errors to touch the lamp head and electric shock.

Solar lamps have two types: split type and integrated. Generally, families are more suitable for using integrated Solar lamps. Although the efficiency of solar energy may be less efficient, it is more convenient.

2. How to install Solar lantern hives

The family uses Solar lamps must be installed first. The installation of home Solar lamps is divided into four parts: battery board, battery, controller, and wire. The specific installation method is as follows:

1. Install the panel

Determine the tilt angle of the battery board according to the local latitude and other to ensure that the battery board has sufficient Solar irradiation.After determining the angle, fix the bracket at the position of the Solar light, and fix the battery plate on the bracket.

2. Install the battery

According to the design requirements, dig the box pond well, and put the buried box with the battery into the pool, lead to a wire Tube, and cover the cement board.Before putting the battery in the ground box, you need to determine whether the battery is intact. It is usually recommended to put in the same model and the same specifications and connect the battery in series.The burying boxes need to be used for glue, and the protective Tube is tightly fixed.

3. Install the controller

The controller generally uses a special controller of Solar power supply. When the connection is connected, connect the wiring terminal of the battery on the controller, and then connect the photovoltaic panel wire wire, and finally connect the load terminal.Be sure to pay attention to the battery, photovoltaic battery panel, load,-extremely cannot be connected, otherwise it may cause short circuit.After connecting the line, place the controller in the lamp column and fix it with bolts.

4. Pay the wires

Put the lamp head on the lamp arm, adjust the irradiation angle, and tighten it with the screw.Connect the lamp head line with the Solar panel and tighten the waterproof joint.After receiving it, test whether the Solar Lamp can be used normally, and it can be put into use normally.

1. precautions for the installation of courtyard Lights

1. Pay attention to personal safety when installing

Pay attention to personal safety when installing the courtyard light, do not shock.When you are grounded, you should pay attention to the metal columns and lamps that are close to the naked conductor should be connected with the PEN line.

2. The light source of the garden lamp

The light source of the courtyard light should be installed with a small -power color rendering high -pressure sodium lamp, the golden capacity of the halide lamp, the energy -saving lamp and LED light.

3. The wiring of the garden light

When you are grounded, you need to pay attention to the metal columns and lamps that can be connected to the naked conductor should be connected with the PEN line. At the same time, the ground wire should be set up alone.At the same time, this can ensure that the garden Lights are more secure after installation and avoid safety accidents.

4. installation test of garden Lights

After completing the above installation work, the courtyard light needs to be allowed to be tried and observed whether the brightness of the lamps meet the regulations, and whether the brightness is stable, etc. In addition, the insulation test is required.To ensure the safer installation of the lamp.After completing the installation of the courtyard Lights, it is necessary to check the working status of the courtyard light and the operation of the switch, etc.

2. What problems should be paid to the use of courtyard lamps

Do not hang items and dry clothes on the lamps, otherwise it will easily cause the lamp to damage.

Check whether the brightness of the lamps regularly is normal. If there is a light, the lamps are dark, flashing, etc., the light bulbs should be replaced in time to avoid aging of the lamp.

maintenance of lamps regularly, including water -resistant paint and cleaning inspection light boxes, can extend the service life of the lamp.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. What are the types of home bedside lamps?

People in bedroom decoration people like to arrange simple bedside lamps on the bedside. It can not only be used for reading, but also create a warm atmosphere. It is necessary to choose a suitable bedside head lamp.The main types of home bedside lamps are mainly:

1. bed head lamp

The table lamp, also known as seat lamp, is a common choice for bedroom bedside lamps. It has a rich style and shape. It is generally placed on the bedside table of the bedroom to provide lighting.The bedside lamp can be moved, the light is fixed, and it also has a certain decorative effect.

2. bedside Wall lamp

Many families choose wall lamps as bedside lamps. The wall lamps have diverse shapes, full of creativity, and their light is softer. It does not affect other people's rest while playing a good lighting effect.Decoration.

3. The bedside floor lamp

In addition to the common table lamps or wall lamps, floor -to -ceiling lights can also be used as bedside Lights. It is generally composed of lampshade, bracket and base. It is very decorative. It can be placed on the bedside.Provide soft, not dazzling light, and it is also convenient to move.

4. The bedside chandelier

A new type of bedside lamp choice of chandeliers is mainly hung on the ceiling. One or more chandeliers can be hung by Hanging down one or more chandeliers, which can make the atmosphere of the bedroom stronger.

Second, the bedroom Wall lamp is good or the table lamp is good

The choice of bedroom bedside lamps is still two mainstream. Many friends are entangled in the bed head lamp or good Wall lamp. In fact, these two bedside lamps are very good.

1. Advantages of bedside Lights

The lighting range of the bedside lamp is relatively small and concentrated, which will not affect the light of the bedroom room, and its light range is limited to the table lamp, which is easy to read and save energy.Another advantage of the bedside lamp is convenient movement. When reading, you can pull the lamp from the bed, but be careful to avoid touching the line.

2. The advantages of the bedside Wall lamp

The advantage of the Wall lamp is that it is more artistic and contagious. Its lines are connected to the switch panel at the door. You can open it as soon as you enter the bedroom. The atmosphere is soft;It also saves space than table lamps.

It can be seen that both bedside lamps have their own advantages. How to choose depends on their preferences and the style of bedroom decoration.However, no matter which bedside lamp is selected, you should pay attention to the shape of the bedside lamp with the bedroom decoration style.

1. What are the advantages and disadvantages of Solar lamps?

Advantages of Solar street lights

1. Energy -saving and environmental protection -Solar street lights use natural light to reduce the consumption of electrical energy; Solar street lights are polluted and radiated, which is in line with modern green environmental protection concepts.

2. Safe and durability Traditional lighting street lights can be transformed through electrical energy, which may cause hidden safety hazards due to construction quality, aging materials, and abnormal power supply.The Solar street lights do not use AC power, and the battery uses the battery to absorb solar energy and convert low -voltage DC into optical energy. There is no hidden safety hazard.At present, the production technology of most Solar battery components is sufficient to ensure that the performance will not decrease for more than 10 years. Solar battery components can generate electricity for 25 years or longer.

3. Low high -tech content and low maintenance costs -Solar street lights are controlled by intelligent controllers, which can be based on the natural brightness of the sky and the brightness required by people in various environments within 1 day.In remote areas far from town, the cost of maintaining or repairing conventional power generation, transmission, street lights and other equipment is high.Solar street lights only need cyclical inspection and little maintenance workload, and its maintenance costs are much less than conventional power generation systems.

4. Install component building blocks, independent power supply -flexible and convenient installation, so that users can choose and adjust the capacity of Solar street lights according to their needs.The Solar street lights Running away from the net have the autonomy and flexibility of power supply.

Disadvantages of Solar street lights

1. High cost -the initial investment in Solar street lights is large, and the total cost of a Solar street light is 3 or 4 times that of the same power conventional street lights.

2. Low energy conversion efficiency -The conversion efficiency of Solar photovoltaic batteries is about 15%to 19%. In theory, the conversion efficiency of silicon Solar cells can reach 25%, but after actual installation, the efficiency may be reduced due to the blocking of the surrounding buildings.Essence

3. Affected by geographical climatic conditions -due to the sun to obtain energy, the local geographical climate and weather conditions directly affect the use of street lighting.The rainy days will affect the lighting Lights, causing the illuminance or brightness to meet the requirements of the national standard, and even the Lights appear. Because the light is insufficient during the day, the light time at night is too short.

4. Lowlire and cost -effectiveness of components -the price of batteries and controllers is high, and the battery is not durable. It must be replaced regularly. The service life of the controller is generally only 3 years; the reliability is low.

5. The maintenance of Solar street lights is difficult. The quality of the heat island effect of the battery board cannot be controlled and detected. The life cycle is not guaranteed, and the control management cannot be uniformly performed.There may be different lighting situations; the range of light is narrow. The Solar street lights currently used by the China Municipal engineering Association are inspected and determined on the spot. The general illumination range is 6-7m.The needs of the main road.

2. What are the types of Solar lamps?

1. home lighting

Compared with ordinary LED lights, Solar lamps are built into lithium batteries or lead-acid batteries, which are connected to one or more Solar panels to charge it. Generally, the charging time is about 8 hours, and the use time is 8-24 hours.Generally with charging or remote control functions, the appearance is different according to user needs.

2. Signal light

The role of navigation, aviation and land Traffic signal lights is very important. Many local power grids cannot supply power, while Solar signal Lights can solve the problem of power supply. The light source is mainly based on small particles.Good economic and social benefits have been achieved.

3, lawn Lights

Solar lawn Lights, light source power 0, 1 ~ 1W, generally use small particles to light emitting diode (LED) as the main light source.The power of Solar panels is 0, 5 ~ 3W, and can use two batteries such as 1 and 2V nickel batteries.

4, Landscape light

Landscape lighting Solar lights are used in squares, parks, green spaces and other places. Various shapes of small -power LED dot light sources and wire light sources are used. There are also cold and cathode -shaped Lights to beautify the environment.Solar landscape lamps can achieve better landscape lighting effects without destroying green spaces.

5. Make a lamp

Lights used for night orientation instructions, house cards, intersections.The optical flux of the light source is not high, the system configuration requirements are low, and the amount of usage is large.The light source of the identified light can generally use a small -power LED light source or a cold cathode light.

6. street lights

Solar street lights are used in village roads and rural roads. They are one of the main applications of Solar photovoltaic lighting devices.The light source adopted has a small power high -voltage gas discharge (HID) light, fluorescent lamp, low -voltage sodium lamp, and high -power LED.Due to its overall power restrictions, there are not many cases applied to urban main roads.With the complementary with the municipal route, the application of Solar photovoltaic lighting street lights on the main road will increase.

7, insecticidal lamp

It is used in orchards, plantations, parks, lawn and other places.Generally, fluorescence Lights with specific spectrals, more advanced LED purple Lights, and radiating murderous insects through its specific spectrum lines.

8, flashlight

The use of LED as a light source can be used in the wild or emergency.

9, courtyard light

Solar courtyard Lights are used in urban roads, commercial and residential communities, parks, tourist scenic spots, squares and other lighting.You can also change the above -mentioned municipal lighting system to the Solar lighting system according to the needs of the user.