[Mounting Shoe maintenance] How to maintain Outdoor Climbing shoes?

mountaineering shoes cleaning and maintenance method

Velvet Skin: The fluffy Skin is generally used in the second -layer leather. It is made of hair and dyeing process. At present, most Climbing shoes are used as the upper.I know that some manufacturers also use PU velvet Skin (in fact, the artificial leather, the appearance is enough to be false, but it is not easy for everyone to discern) as the upper material.Velvet Skin is just one of the most commonly known as one, such as sandalog Skin, bristles, etc.

First: Use a soft brush (such as a toothbrush) to gently brush back and forth with a soft brush (such as a toothbrush). If you have oily or stubborn stains, use a soft brush to dip some soap to clean and rinse it.Both.For the stains that are not particularly stubborn, you can also try to remove the rubber used by elementary school students. The effect is very good and can remove most of the stains.

Second: You can handle some small damage and scratches. The specific method is that when the Skin surface is dry, use a knife to repair the damage.Then use a frustrated knife or sandpaper (to choose from the degree of damage and operation, play a certain grinding effect), and then use a hard brush to go back and forth at the repair point or rotate the brush. This can restore the upper to a certain extent.It's still very good, of course, it is impossible to fully recover as new.When you clean up the mountaineering shoes, you can use a full brush treatment of the upper once, then you can clean the dust and repair the leather scratch and fluff to a certain extent.

Third: After the shoes are completely wet by rain or wading, it is best to take natural dryness such as wind (cold and dry).It is best to plug some waste newspapers in the shoe (how many times can be replaced in the middle). This is to avoid changes in shoes, which affects the future wearing and beauty.

Fourth: "The knife and guns are entered the warehouse, the horse is put on the south mountain." When wearing a mountaineering shoes, you should put the shoes in the shoe box to store it. This is an important part of maintenance of mountaineering shoes.

precautions for mountaineering shoes

Wait for the mountaineering shoes to be completely dry before putting it in the shoe closer to prevent the moisture from mildew in the shoe box.In addition, it is enough to use waste paper balls to stuffed shoes too tightly. It is best to stuff the paper balls to the shoe port. The purpose of this is to prevent the shoes from being changed for a long time.The role.Every time I wear new shoes, I use the shoes (box) to leave the factory to support the shoes of the shoes and the packaging LOGO paper in the shoe box so that I can continue to use the shoes next time.Do not put the shoes in the plastic bag to be closed and fasten. This can maintain the necessary air exchange (prevent mildew). Besides, the leather also needs to breathe. Finally, place the stored shoe boxes in a dry environment.

What are the characteristics of Outdoor clothing

1. Keep warmth

Although warmth is closely related to the thickness of the fabric, outdoor sports are not allowed to be too heavy, so it is necessary to keep warm and lightweight in order to meet the special requirements of Outdoor sportswear.The most common method is to add special ceramic powders such as chromium oxide, magnesium oxide, and oxide to the synthetic fibrous spinning fluid such as polyester, especially nano -grade micro ceramic powder.Thermal energy can also reflect the far -infrared rays emitted by the human body, so it has excellent thermal insulation and heat storage performance.

2. waterproof and humidity

The sports meeting exudes a lot of sweat, and it is inevitable that it is difficult to encounter storms. This is a pair of contradictions: it is necessary to prevent rain and snow, but also discharge the sweat from the body in time.waterproof and humid clothing is a enhanced fabric surface tension that uses the surface tension of the water to apply a layer of PTFE (the chemical composition of the polytrafluoroethylene PTFE of the "King of Corrosion Fiber") on the fabricThe chemical coating makes the water droplets tighten as much as possible without scattering and infiltrating the surface of the fabric, so that the pores on the fabric are unable to.At the same time, this coating is porous, and the water vapor in the single molecular state can be smoothly distributed to the surface of the fabric through the capacity of the capillary between the fiber.

3. Antibacterial and deodility

Due to the characteristics of exercise, a large amount of sweat and sebaceous glands are secreted.The Outdoor conditions cannot be changed often. In the appropriate temperature and humidity environment, microorganisms are reproduced in large quantities, causing people to emit an indecent odor and cause itching.Therefore, regular outdoor sports clothing is organized by antibacterial deodorization chemistry.The organic way is generally to fix the organic metal -type surfactant or silver, copper and other heavy metal ions with sterilization effects on the fiber through the fiber to make it have certain washing resistance.Of course, an important principle of choosing a bactericide is definitely non -toxic or low toxic, otherwise it will be the end.

4. Prefestability

outdoor sports often walk through the muddy and humid mountains and forests. It is inevitable that clothes are dirty. This requires that the appearance of clothing should be as much as possible to be stained by stains, and once it is stained, it is easy to wash and remove.Change the surface performance of the fiber and greatly improve the surface tension of the fabric, making it difficult for oil and other stains to penetrate the inside of the fabric. The slight stains can be removed with a wet cloth, and the heavier stains are also easy to clean.And moisturizing and sorting can not only prevent oil pollution pollution, but also have the performance of waterproof and humidity. It is generally called "three anti -collation" (water refusal, oil refusal, and pollution -proof).Commonly used in the outer layer and backpacks, shoes, and tents.

5. Anti -static

Mountaineering is the core content of outdoor sports. In addition to the primitive dense forest, the alpine plateau area above 3,000 meters above sea level is due to low air pressure, moisture is easy to volatilize, and the environment is generally dry.The problem is more prominent.The harm of static electricity is generally manifested in clothes that are prone to hair, dirty dirt, near the Skin with electric shocks and stickiness.If you carry precision electronic instruments such as electronic compass, altitude meter, GPS navigator, you may be interfered by the electrical electrical electrical electrical electricity and cause serious consequences.

Types of Outdoor clothing

1. Inner clothing

The inner clothing is also known as the sweat layer, and the Skin is pasted in the Skin shirt, underwear, panties, socks, T -shirts and other clothes.Basically, materials such as SUPPLEX, COOLMAX, or Cooldry. The special fiber structure of these materials has a strong rainbow absorption function, which can guide the sweat near the Skin to the outer layer and maximize the surface, maximize the sweat from the maximum extensionThe inner layer has achieved the requirements of sweating speed.It can make the wearer feel dry.Sweeping underwear also has types of long sleeves and different thickness. There are general shorts and long sanitary pants in the lower limbs.

2. Warm -keeping clothing

The warm layer of clothing is also known as the middle layer. The main function of this layer is to directly contact the human body and the external cold air to avoid the cold or even warm.Fast sweat, light weight, too dampness still keeps stubbornness and can be squeezed at will without deformation, but after the moisture, there is almost no warmth effect. It is a major disadvantage.

3. House clothing

The suit clothing is also known as blocking layer. It is located on the outermost layer of the three -layer system. For the first time against the snow and rainstorms of the outside world, the most ideal is the waterproof and breathable Outerwear.It is a very good windproof and warm clothing.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How to clean the Ski clothing

1. Machine washing

(1) Before the skiing suit is cleaned, make sure that all zipper and bonding are drawn to check whether the pocket has been emptied.

(2) Make sure that there are no other clothing, washing agent or softener in the washing machine.To do this, you can put some hot water in the drum, and then let the machine run for a while to remove any residues.Of course, don't forget to clean the detergent of the washing machine.

(3) Pour an appropriate amount of detergent into the detergent box. The official suggestion is to wash one skiwear dose of two -block dose and two Ski suits for three -block dose.Do not wash more than two snow clothes at a time, and do not wash the snow clothes and other clothes at the same time.

(4) Now put your ski clothes into the washing machine drum, perform a complete cleaning cycle, and regulate the temperature at about 30 degrees (pay attention to check the label of the clothes before washing the label at the label).

(5) After the cleaning is completed, the Ski clothing can be air -dried naturally. If the washing instructions indicate that the drum can be allowed to dry, the adjustment temperature will be maintained at a low mid -range (free -scaling setting).Be careful not to try the snow clothes on the heating or other thermal sources to dry it as soon as possible, because it will damage the waterproof and breathable coating of the snow suit.

2. Handwash

(1) Check out the pocket of the snow suit.

(2) Fill cold water in the sink and mix a certain dose of cleaning agent.

(3) Rinse at least twice to ensure that all cleaners have been washed.

(4) Gently twist the water of the clothes. Do not twist or press the fabric.

2. precautions for cleaning the Ski Service

1. Pull up all the zipper, buckle, and the magic stickers of the skiwear to restore the wind rope on the stretching hat -otherwise it will cause the fabric to distort.

2. Do not add a softener, because the soft agent may cause the gel barrier, the fit film, and the lining layer, and the clothes are scrapped. Even if it is not so serious, the production of bubbles is inevitable.

3. It is recommended to use about 30 water. It cannot be used with hot water and warm water, because the fabric of the Ski clothing is afraid of high temperature.

3. How to deal with skiing clothes

1. What should I do if skiing clothes wear?You can add a neutral washing solution to 30 degrees of warm water, and then use a soft brush to brush the ground with a soft brush, put it in a drum washing machine, wash it at low speed and then rinse with warm water three or four times.

2. In order to avoid hairy balls on the surface of the clothing, you can turn the ski clothes on the front and back of the clothing and clean it, and close all the stickiness to prevent the stabbing fabric from the sticky stabbing surface.

3. Functional fabrics should be soaked and cleaned with dedicated washing agents.

4. The method of restoring water -proof effect is to iron with the medium temperature steam iron after cleaning and drying.

5. In the washing and collection, you should also pay attention to: as clean, dry, insect -proof, and mildew. The collection of clothing cabinets should be cleaned, dry, and sealed. The clothing should not be squeezed for a long time.

6, sunlight exposure to dry clothes should be appropriate to avoid long -term sunlight ultraviolet irradiation.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. The structure of the gliding umbrella consists of several parts

The gliding umbrella is a flying athlete wing umbrella suit. It uses air to take off a air sports that takes off and soar. It also refers to sports equipment used by gliding umbrellas. The gliding umbrella is generally composed of four parts:

1. Wing -shaped umbrella clothes

Also known as the umbrella wing, it is the main component of the gliding umbrella to generate lift and bearing load.The wing umbrella coat is composed of dozens of shaped wing ribs that are distributed regularly in the direction of the upper wing surface, the wing surface, and the wings.The horizontal arrangement of the rib constitutes a certain size of the intake port; because the back edge of the umbrella wing is completely closed, the air chamber that is used between the upper and lower wings and the ribs of each wing is formed.

2. Umbrella rope

The connection of the umbrella wing and the strap system makes the gliding umbrella a whole, and keep the gliding umbrella that should have the wing shape that should be available in the flight. The umbrella rope is also a passing component loaded by the gliding umbrella. Pilots can also pass through the umbrella ropeEffective manipulation of gliding umbrellas.Generally, the umbrella rope is divided into three or four groups from the front to the back, which are called A, B, C, and D, and are distributed symmetrically on both sides of the central axis of the umbrella.The upper end of the umbrella rope is usually a "y" -shaped fork shape. The suture part of the wing surface and wing ribs on the lower wing wing of the umbrella coat is connected to the umbrella wing.If the force condition is determined, the length is determined according to the wing shape and stress condition connected by the manipulation band.

3, strap system

Also known as a seat strap or suspender, it is a license component that fix the pilot's body and connects to the entire umbrella wing system. It is also a protective part of the human body.The tape, the backup umbrella connection band, and the metal ring buckle and the fast -lifting lock, which form a whole around the "L" -shaped Backpack.

4. Manipulation system

The manipulation system of the gliding umbrella is mainly composed of the manipulation Belt, the manipulating rope and the manipulation ring (manipulating rod). The high -performance gliding umbrella also has a set of pedal acceleration devices. When necessary, some umbrella ropes can also be used for manipulation.The entire manipulation system is symmetrically distributed on both sides of the center line of the umbrella, and the upper end of the left and right manipulation bands is "Y".The connection of the circle is connected, and the pull -down rope can be achieved through the sloping rope. At the same time, the pull -down rope can be regulated at the same time.When the manipulating circle is not used, it can be fixed with the deduction on the rear manipulation Belt.The root of the gliding umbrella manipulating band is usually divided into two or three or three roots, the upward split, and then divided into three or four roots from the front to the back (through the unloading loop) according to the order of A, B, C, and D, eachConnecting the umbrella rope.Group A of high -performance gliding umbrellas also installed with two pulleys and a section of acceleration rope in front of the front, so that in addition to the connection with the umbrella rope, it can also implement acceleration, deceleration, and high consumption.Manipulation.The sole effect of the pedal acceleration device is to use the flying speed of the sliding solid umbrella when it is needed during flight.The lower end of the acceleration device is connected to the pedal metal rod (acceleration rod). The two accelerated manipulating ropes on the rod are connected to the acceleration rope through the pulley in front of the strap system.When the metal rods were pierced by two pedals, the vertical bands of Group A and B were pulled down by the steps. At the same time, the anterior edge of the umbrella was pulled down, the angle was reduced, and the horizontal speed increased.

2. What is the principle of gliding umbrella flight

Global umbrellas are divided into two types: dynamic paraglider and no dynamic gliding umbrella. Their principles are the same, but the power umbrella has an additional power device to auxiliary flight. The flying umbrella flight uses the principles of aerodynamics.

The upper and lower lengths of the gliding umbrella are different. When there is a forward speed, the air flows through the upper and lower surfaces of the gliding umbrella, and there will be different pressure differences on the surface of different lengths.When flowing through the upper upper layer, the pressure of the distance between the distance between the distance is small, and the air flowing through the recessed surface of the lower layer contains the slower pressure of the short current speed, so the lift of the lower air pushing the wings upward, the pressure of the upper and lower layers of the upper and lower layers, and the upper and lower layer pressureThe difference is the total lift, which is the basic flight principle.

In addition, the gliding umbrella can also use other external forces to lift off (such as engine power, rising airflow, etc.) to combine the temperature, humidity, and density of the terrain and air.The umbrella climb upwards until these natural conditions disappear.

3. How to fly for a gliding umbrella for a longer time

With the principle of flying umbrella, gliding umbrellas can be stayed in the air. If you want to fly longer, there are two main methods:

1. River rising: Flying near a mountain or a small mountain to capture the wind that comes on the face. When the wind rises across the ridge, the gliding umbrella will get the power climb again. Using this principle can fly longer.

2. Flying in thermal airflow: Thermal airflow is the hot air that heated from the ground and quickly rises to the air. The gliding umbrella flys to the rise when flying to the rise. Utilizing this airflow, you can fly longer and further.

How to jump on the platform to Ski

1. slide

Slip is to form a faster initial speed at the jump end to extend the flight distance in the air.When entering the tilt of the sliding road, the Ski players should be squat as much as possible, and the upper body is tilted into a streamlined posture, and it is necessary to roughly parallel with the Ski field to minimize the air resistance.

2. Take off

What is the jumping method of skiing?Take off is the key to the entire platform skiing project. The quality of the starting movement determines the athlete's performance.Because the fastest speed of the slide can reach more than 30 meters per second, the best time to master jumping is the main standard for measuring the level of the athletes.The method of taking off the jumping force is different from the high or long jump. To be precise, it is not a jump but a movement of two legs.Athletes quickly slipped along the sliding road. Generally, when the tip of the snowboard reached the ends of the table, the upper body stretched forward.

3. Flying in the air

Athletes can only achieve their ideal results only by maintaining bold, calm, stable and good at controlling the snowboard air. At this time, the athlete's upper body should be fully stretched, the upper body and the lower limbs are slightly twisted, the two snowboard parallel and the same as they are with the lower limbs.The soles of the feet are on the sharp corner, the upper body and the snowboard are basically parallel, and the arms are sticked straight on both sides of the body.

4, landing

After skating, jumping, and air flight, and finally completing the correct successful landing action, the whole set of movements are consistent. In one go, Ski players can get high scores.When landing, it should be elastic and stable. Both feet are separated from the bow and arrow steps, and the body weight falls on both feet.Body balance.After landing, keep a balanced posture smoothly to the ending area, and all movements are completed.

What are the platforms for skiing competitions

1. Ordinary Taiwanese men's single

Starting from the qualification competition, the top 15 players in the ski resort do not need to participate in the qualification competition and advance to the final.The remaining players must compete for 35 finals in the qualification competition.There are two jumps in the finals. The first 50 people participated in the first jump. The best 35 people participated in the second jump.The order of the second jump is carried out from low to high according to the first jump.

2. Men's single person

What are the competitions for skiing?The rules of the Men's single -player competition are the same as ordinary Taiwanese men, but it is carried out on the big stage.Most of the Ski World Cups are carried out on the large stage. Only one or two stations in a season are carried out on ordinary platforms.

3. Men's group

In this game, each team has four players.The game is divided into two rounds. In the first round, each team jumped one person first, and then each team jumped the second person, and then the third person in each team, the fourth person.The four players of each team have a total score of scores.Only the top eight teams can participate in the second round. The order of the second round of the game is the same as that of single -player games. According to low to high according to the performance of skiing, the team with the highest total score in the end win.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;